Purification and characterization of an N-acetylglucosamine-binding lectin from Koelreuteria paniculata seeds and its effect on the larval development of Callosobruchus maculatus (Coleoptera: Bruchidae) and Anagasta kuehniella (Lepidoptera: Pyralidae)

This study describes the purification of an N-acetylglucosamine-binding lectin from Koelreuteria paniculata seeds and its effects on the larval development of Callobruchus maculatus and Anagasta kuehniella. The lectin (KpLec) was characterized and isolated by gel filtration, affinity column, and reverse phase chromatography. SDS-PAGE indicated that this lectin is a dimer composed of subunits of 22 and 44 kDa. The N terminus exhibited 40% similarity with Urtiga dioica agglutinin. KpLec was tested for anti-insect activity against C. maculatus and A. kuehniella. With regard to C. maculatus, an artificial diet containing 0.7 and 1% KpLec produced LD(50) and ED(50) value, respectively. However, for A. kuenhiella, an artificial diet containing 0.65% KpLec produced an LD(50), whereas 0.2% KpLec produced an ED(50). The transformation of genes coding for this lectin could be useful in the development of insect resistance in important agricultural crops.     

Rheological properties of concentrated skim milk: influence of heat treatment and genetic variants on the changes in viscosity during storage

Heat treatment during manufacturing of milk powder is one of the most important tools for manipulation of its functional properties, and it is the basis of the classification of these proteins into low-, medium-, and high-heat types. Slight differences in the sequences of the major proteins in milk (genetic variants) seem to have also a significant effect in milk powder processing (U.S. patent). Therefore, the effects of high-temperature storage and heat treatment on skim milk of defined genetic variants of beta-lactoglobulin (beta-LG) were measured. The samples had 45% total solids, the temperature of aging was 50 degrees C, and the heat treatment was 90 degrees C for 10 min prior to evaporation. Measurements on shear rate and on apparent viscosity were determined for each sample. During storage of the concentrated milk, the apparent viscosity and yield values increased markedly, and the age-dependent increase in viscosity in heat-treated concentrated skim milks was much more pronounced than in those prepared from unheated skim milks. The increase in apparent viscosity and yield value with storage time was notably different for milks containing different genetic variants. Unheated concentrated milks containing the B variant of beta-LG showed the most rapid increase in apparent viscosity with storage time, whereas the viscosity increase was slowest in the concentrate containing the A variant. In contrast, heat-treated concentrated milks containing the A variant of beta-LG showed the most rapid increase in viscosity with storage time, whereas the viscosity increase was slowest in the concentrate containing the AB variant. The changes in apparent viscosity of concentrated milk were largely reversible under high shear during the early stages of storage, but samples stored for a long time showed irreversible changes in apparent viscosity. Particle size analysis confirmed irreversible aggregation and fusion of casein particles during storage.     

Sequential stopping rules for species accumulation

Identifying and counting the total number of biological species observed to date, and plotting versusa measure of the effort used to record them, gives rise to a species accumulation curve. Interest typically is concerned with estimating the total number of species in the area of study, having observed only the accumulation curve, having no information on species frequencies. This article considers the problem of optimally stopping the sampling process. We use a sequential procedure with a fixed maximum horizon for accumulation. A utility function based on the number of new species to be observed and the effort saved from the maximum horizon is adopted, and a workable algorithm based on backward induction is obtained. An example in accumulation of bat species is also presented.     

Heavy metal, total arsenic, and inorganic arsenic contents of algae food products

The total arsenic, inorganic arsenic, lead, cadmium, and mercury contents of 18 algae food products currently on sale in Spain were determined. The suitability of the analytical methodologies for this type of matrix was confirmed by evaluating their analytical characteristics. The concentration ranges found for each contaminant, expressed in milligrams per kilogram of dry weight, were as follows: total arsenic, 2.3-141; inorganic arsenic, 0.15-88; lead, < 0.05-1.33; cadmium, 0.03-1.9; and mercury, 0.004-0.04. There is currently no legislation in Spain regarding contaminants in algae food products, but some of the samples analyzed revealed Cd and inorganic As levels higher than those permitted by legislation in other countries. Given the high concentrations of inorganic As found in Hizikia fusiforme, a daily consumption of 1.7 g of the product would reach the Provisional Tolerable Weekly Intake recommended by the WHO for an average body weight of 68 kg. A more comprehensive study of the contents and toxicological implications of the inorganic As present in the algae food products currently sold in Spain may be necessary, which might then be the basis for the introduction of specific sales restrictions.     

Utilization of enzyme mixtures to retard bread crumb firming

The influence of enzyme mixtures containing amylase and lipase activities on straight dough bread staling was studied. Amylopectin retrogradation, crumb firming, amylose-lipid complexes, and dextrin production were analyzed in bread samples supplemented with two enzyme mixtures. The addition of enzyme mixtures to bread formula causes a beneficial effect on bread keeping properties and the formation of a more thermostable amylose-lipid complex than the one found in control bread. Amylopectin retrogradation was inhibited by the use of the enzyme; the effect was accompanied by reduced crumb-firming rates. The enzymatically generated water-soluble dextrins (maltose and DP3, DP4, DP5, and DP6 dextrins) are the most effective in preserving crumb softness during bread storage.     

Zinc transformations in acidic soil and zinc efficiency on maize by adding six organic zinc complexes

Experiments under laboratory and greenhouse conditions were conducted to study the response of maize (Zea mays L.) to Zn fertilizer applications (Zn-phenolate, Zn-EDDHA, Zn-EDTA, Zn-lignosulfonate, Zn-polyflavonoid, and Zn-heptagluconate) in an Aquic Haploxeralf soil. The application of Zn complexes significantly increased Zn uptake by the plant compared with that in the control soil. The highest enhancements were obtained in soil treated with Zn-EDTA, Zn-lignosulfonate, and Zn-EDDHA. The highest percentages of Zn taken up by the plants occurred when 20 mg x kg(-1) Zn was applied as Zn-EDTA fertilizer and 10 mg x kg(-1) as Zn-lignosulfonate fertilizer. In the greenhouse experiment, Zn speciation in soil after harvesting showed that almost all Zn was found in the residual fraction followed by metal in the water-soluble plus exchangeable fraction and metal bound to organic matter. The most effective fertilizers maintaining Zn in the most labile fractions were Zn-phenolate, Zn-EDTA, and Zn-lignosulfonate. Conversely, in the incubation experiment, only a small percentage of Zn was found in the water-soluble plus exchangeable fraction and no differences in the Zn distribution were observed between the different fertilizer treatments. The micronutrient content in maize was positively correlated with the water-soluble plus exchangeable Zn as well as with the available Zn determined by the diethylenetriaminepentaacetic acid and Mehlich-3 methods, in the greenhouse experiment. Results of this study showed that the incubation experiment in acidic soil is not a suitable tool to establish the different effectiveness of Zn chelates in plants.     

Human apo A-I and rat transferrin are the principal plasma proteins that bind wine catechins

The processes of absorption, blood transport, tissular distribution, metabolism, and excretion are at present understood very little. The aim of this study was to investigate blood transport and identify which principal plasma proteins in humans and rats bind to monomeric catechin and procyanidins in red wine ex vivo. Human and rat plasma and serum were incubated with (+)-catechin and procyanidins from grape seed, the origin of red wine catechins. Proteins were separated by SDS-PAGE and native-PAGE to determine which proteins bound to these compounds. The principal protein that bound to (+)-catechin in each species was sequenced. SDS-PAGE showed that (+)-catechin and procyanidins mainly bound to a protein of about 80 kDa in rats and 35 kDa in humans. Their sequencing indicated that these proteins were apo A-I in humans and transferrin in rats. The fact that red wine procyanidins bind to both proteins suggests that they may have a role in reverse cholesterol transport and in the oxidizing action of iron.     

Sulfated ferulic acid is the main in vivo metabolite found after short-term ingestion of free ferulic acid in rats

The bioavailability of ferulic acid (FA; 3-methoxy-4-hydroxycinnamic acid) and its metabolites was investigated in rat plasma and urine after an oral short-term ingestion of 5.15 mg/kg of FA. Free FA, glucuronoconjugates, and sulfoconjugates were quickly detected in plasma with a peak of concentration found 30 min after ingestion. Sulfoconjugates were the main derivates ( approximately 50%). In urine, the cumulative excretion of total metabolites reached a plateau 1.5 h after ingestion, and approximately 40% were excreted by this way. Free FA recovered in urine represented only 4.9 +/-1.5% of the native FA consumed by rats. Glucuronoconjugates and sulfoconjugates represented 0.5 +/- 0.3 and 32.7 +/- 7.3%, respectively. These results suggested that a part of FA incorporated in the diet was quickly absorbed and largely metabolized in sulfoconjugates before excretion in urine.     

Edible arabinoxylan-based films. 1. Effects of lipid type on water vapor permeability,film structure,and other physical characteristics

Arabinoxylans (AX) are natural fibers extracted from maize bran, an industrial byproduct. To promote this polymer as a food ingredient, development of edible coatings and films had been proposed. Indeed, composite arabinoxylan-based films were prepared by emulsifying a fat: palmitic acid, oleic acid, triolein, or a hydrogenated palm oil (OK35). Lipid effects on water vapor permeability (WVP), surface hydrophobicity (contact angles), lipid particle size, and mechanical properties were investigated. Results showed that OK35-AX emulsion films had the lowest WVP. Emulsified films presented a bimodal particle size distribution; however, the smallest particle mean diameter (0.54 microm) was observed in OK35-AX emulsion films. Contact angles of water comparable to those observed for LDPE films (>90 degrees ) are measured on the OK35-AX film surface. Finally, only triolein-AX emulsion films had elongation higher than films without lipid. These results suggest that OK35 enhances functional properties of AX-based films and should be retained for further research.