Influence of light intensity on feeding, growth, and early survival of leopard coral grouper (Plectropomus leopardus) larvae under mass-scale rearing conditions

This study investigated the effect of different light intensities on feeding, growth and survival of early stage leopard coral grouper Plectropomus leopardus larvae. Four different light intensities (0, 500, 1000 and 3000 lx) were used and larvae were kept under constant light conditions from 0 day after hatching (DAH) to 5 DAH. The larvae were fed a small S-type of Thai strain rotifers at a density of 20 individuals/mL from 2 DAH. The number of rotifers in larval digestive organ and total length of larvae were examined at 3 h intervals between 04:00 and 22:00 h on 3 DAH, and thereafter at 6 h intervals until the end of the experiment (5 DAH). Four experimental trials of the larval rearing were repeated using by 60 kL mass-scale rearing tanks. The results indicate that coral grouper larvae are visual feeders and their food intake increases with increasing light intensity. Food intake of larvae reared at 3000 lx was significantly higher than those reared at 0–1000 lx on 3 DAH despite being the first-feeding day (P < 0.01). On 4 DAH, total length of larvae reared at 3000 lx was significantly larger than those reared at the lower light intensities (0, 500 and 1000 lx), and thereafter light intensity significantly influenced larval feeding and growth until the end of the experiment. Survival on 5 DAH did not show a significant difference between light intensities, but survival rate at 3000 lx and 1000 lx had a tendency to be higher than those reared at the lower light intensities (0 and 500 lx). In contrast, larvae reared at 0 lx exhibited stagnant and/or negative growth. These results indicate that light intensity is significantly the factor affecting larval feeding, growth, and survival in coral grouper larvae under the rearing conditions.     

Preparation and characterizations of polypyrrole on liquid ammonia pre-treated wool fabric

Wool fabric was treated with liquid ammonia at -40 °C for 30 and 60 s prior to the application of polypyrrole (PPy). The polymer was deposited on wool fiber using the chemical oxidation method with 0.02 and 0.05 mol/l (Py) monomer concentration and FeCl₃ as a catalyst. Functional groups of wool samples were analyzed using FT-IR, and surface morphology was investigated using SEM micrographs. Properties such as water absorbency, surface resistivity, abrasion resistance, weight add-on, and air permeability of coated specimens were explored. The FT-IR outcomes revealed the liquid ammonia pre-treatment changed the amount of amide I (NH), cystic acid, cystic monoxide, and dioxide content of the fiber. SEM micrographs revealed the descaling of wool surface after pre-treatment and smooth coating of polymer. Pre-treatment of wool in liquid ammonia improved absorbency of wool fabric with respect to the treatment duration. The surface resistivity of wool fabric decreased with the increase of monomer concentration and pre-treatment duration. The results of abrasion resistance confirmed that the pre-treated fabric exhibited lower loss of polymer after 200 cycles of abrasion. The weight of the fabric was increased and air permeability decreased when the monomer concentration and liquid ammonia pre-treatment duration was increased.     

Effects of date palm leaf fiber on the thermal and tensile properties of recycled ternary polyolefin blend composites

This work investigated the effects of date palm leaf fiber (DPLF) content on the thermal and tensile properties; and morphology of compatibilized polyolefin ternary blend. Recycled polyolefin ternary blend consisting of low density polyethylene (RLDPE), high density polyethylene (RHDPE) and polypropylene (RPP) were fabricated at different parts per hundred resin (phr) of DPLF. Maleic anhydride grafted polyethylene (MAPE) was used as compatibilizer to enhance the adhesion between filler and polymer matrix. The composites were prepared using melt extrusion and tests samples were produced via injection molding process. Thermal conductivity results showed that as much as 11 % reduction in thermal conductivity was achieved with the incorporation of 30 phr DPLF. Highest tensile strength was observed with the incorporation of 10 phr DPLF. The elongation at break was reduced with the addition of DPLF due to impediment of chain mobility by the fillers. Initial degradation temperature increased with the addition of DPLF. Hence, it is concluded that DPLF can be used to develop green and thermally insulating composites. It is hoped that the present results will stimulate further studies on the thermally insulative materials based on natural fibers reinforced polymer composites for applications in the building industries.     

Characterization of the surface properties of cellulosic fibers in fibrous and ground forms by IGC and contact angle measurements

Surface properties of fibrous and ground cotton and linen were investigated by inverse gas chromatography (IGC) and the contact angle with different liquids was also measured on fabrics composed of both fibers. Results proved that dispersion component of surface tension (γ _s ^d ) determined by IGC depends not only on the surface energy, but also on several factors influencing the adsorbability of probe molecules on the cellulosic substrates. For cotton samples, the trapping of n-alkanes among waxy molecules in the outer layer of fibers can be presumed. This effect results in larger γ _s ^d for cotton fibers than for linen in spite of the higher wettability of the linen fabrics. Besides the surface energy and trapping effects, the grinding also influences the γ _s ^d values. Specific enthalpy of adsorption (ΔH _A ^ab ) of polar probes could be determined on all linen samples, but only on the ground cotton sample. Lewis acid-base character calculated for linen and ground cotton samples depends on the same effects as the γ _s ^d does. The similar ΔH _A ^ab values of chloroform (acidic) and THF (basic) measured on each of the samples support the conclusion that the surface character is amphoteric, which is also proved by the high ΔH _A ^ab values of the amphoteric ethyl acetate and acetone probes.     

Preparation of PHEMA/nHAP nanocomposites via <Emphasis Type="Italic">in situ</Emphasis> polymerization in supercritical carbon dioxide for biomedical applications

Poly(2-hydroxyethylmethacrylate) (PHEMA)/hydroxyapatite (HAP) nanocomposites were synthesized through a new route involving nano-sized HAP (nHAP) particles or modified nHAP mixed with monomer 2-hydroxyethylmethacrylate via in situ polymerization in supercritical carbon dioxide (scCO₂). Fourier-transform infrared spectroscopy showed phosphate peak increased with nHAP content in composite. X-ray diffraction patterns of PHEMA/nHAP revealed the presence of crystallized nHAP. Thermogravimetric analysis showed that the ultimate nHAP content in PHEMA/nHAP composites is consistent with its initial amount. Scanning electron microscopy revealed that nanocomposite particles are much smaller than PHEMA particles. PHEMA/nHAP composites with average diameter of approximately 600 nm were obtained in scCO₂ with 94 % yield. Mechanical properties of PHEMA/nHAP nanocomposites were better than those of PHEMA, and compressive modulus and strength of composites with 30 wt.% nHAP were 193 and 29 MPa, respectively. Nanocomposite adsorption toward bovine serum albumin was evaluated, and results indicated that analyte adsorption amount can reach up to 282 mg/g.     

Synthesis and characterization of a novel charring agent and its application in intumescent flame retardant polyethylene system

A novel charring agent poly(pentaerythritol spirocyclic phosphorusoxy spirocyclic diethanolamine borate) (PPSPSDB) was synthesized successfully with diethanolamine borate (DEAB) and spirocyclic pentaerythritol bisphosphorate disphosphoryl chloride (SPDPC), which was combined with ammonium polyphosphate (APP) to endow linear low-density polyethylene (LLDPE) with flame retardance. The structure of PPSPSDB was characterized by FTIR and 1H-NMR. The study of thermal stability of various LLDPE composites showed that PPSPSDB/APP system could effectively improve the thermal degradation and thermal-oxidative stability of the char residues, and PE3 containing 30 wt% APP/ PPSPSDB with a 2 weight ratio left the highest amount of char residue at 800 oC. The results of flammability revealed that PE3 had the best combination property; the limited oxygen index value was 29.6, and vertical burning reached UL-94 V-0 rating, and the tensile strength and notched impact strength were 11.853 MPa and 28.8 kJ/m2 respectively. The investigation of structure and morphology of char residue indicated that the compact foaming char layer, as a good barrier against the transmission of heat and volatiles, was formed for PE3 during combustion.     

Improvement of toughness for the hyaluronic acid and adipic acid dihydrazide hydrogel by PEG

New applications call for many new requirements. In order to improve the toughness of aldehyde hyaluronic acid (A-HA) and adipic acid dihydrazide (ADH) hydrogel, the poly(ethylene glycol) (PEG) was added. PEG content and molecular weight have little effect on the gelation time, and the composite hydrogels can form in situ within 20 seconds at room temperature. The press test showed that the hydrogels containing PEG possessed a better compression resistance, after pressed more than five times, the composite hydrogels could restore. Rheological properties were measured to evaluate the working ability and the effect of PEG on hydrogels. By analyzing the shear viscosity (η _γ=0.01), yield stress (σ ₀) and threshold shear stress (σ _c ), the addition of PEG can make the structure of composite hydrogels get loose and improve the shear resistance. Especially, PEG800 can enhance the antishear ability obviously. The amplitude sweep tests showed a broad linear viscoelastic region, indicating a wide processing range. In the meanwhile, we also found that PEG can improve the optical transmittance of xerogel evidently.     

Obtaining medical textiles including microcapsules of the ozonated vegetable oils

In this paper, it was aimed to obtain disposable medical textiles having antibacterial and wound healing properties, as well as biological adaption. For this purpose, the St. John’s Wort oil and flax seed oil were ozonated, and the oils were capsulated with arabic gum. The produced ozonated oils were characterized through FTIR and TGA analyses, as well as the properties of antibacterial, wound healing, and biological adaption were investigated. The produced microcapsules were examined via optical microscope and FTIR. The characterized microcapsules of the ozonated oils were applied to the textiles with padding method. After the applications, the fabrics were researched with SEM and FTIR analyses; in addition the antibacterial and wound healing properties and biological adaption of the textiles were also investigated. The results showed that the St. John’s Wort oil and flax seed oil were successfully ozonated and microcapsulated. The microcapsules of the oils could be applied to the fabric samples with the determined application recipe. The ozonated oils and the fabric samples applied microcapsules of the ozonated oils gained high antibacterial and wound healing property. In addition, the fabric samples were produced as having biological adaptation.     

Preparation and performance as PEM of sulfonated pre-oxidized nanofiber/SPEEK composite membrane

Building proton transfer channel is an important strategy to optimize the proton transfer process of the proton exchange membrane (PEM). In this work, sulfonated pre-oxidized nanofibers were prepared by solution blowing of polyacrylonitrile (PAN) nanofibers followed by pre-oxidization and sulfonating, and the nanofibers were composited with SPEEK to enhance its performance as PEM. The results of the proton conductivity verified that the employment of sulfonated pre-oxidized nanofibers improved the proton conductivity. Meanwhile, the introduction of the sulfonated pre-oxidized nanofibers realized the upgrades of the thermostability and water absorbency of the membrane, and led to the decrease of the swelling property and methyl alcohol’s permeability of the material. It is indicated that the composite membrane is promising materials for PEM fuel cells.     

Electroneutral cornstarch by quaternization and sulfosuccinylation to improve the adhesion of cold starch paste to raw cotton for low-temperature sizing

The objective of this research was to survey the effects of starch quaternization and sulfosuccinylation on the adhesion of cold starch paste to raw cotton fibers for cotton warp sizing at low temperature. Acid-thinned cornstarch (ATS) was quaternized and then sulfosuccinylated to introduce 3-(trimethylammonium chloride)-2-hydroxypropyl and sulfosuccinate substituents onto its backbones. The electroneutrality of starch samples prepared was achieved by maintaining a constant mole ratio (5.3:1) of the two substituents. A series of electroneutral cornstarch (ECS) samples with different levels of the substituents were derived by altering the feed ratio of the modifying reagents to starch for determining desirable level of starch modification. Adverse influences of cotton wax and starch retrogradation on the adhesion of cold starch paste to raw cotton fibers were evaluated to illustrate the effectiveness of starch quaternization and sulfosuccinylation. It was found that the modification was able to alleviate the adverse influence of starch retrogradation and ameliorate the adhesion to the fibers at low temperature. Higher level of the modification led to less retrogradation and resulted in strong adhesion. Furthermore, the adverse influence of cotton wax on the adhesion could be eliminated after a pre-wetting treatment of raw cotton warps with hot water. The adhesion of ECS paste to raw cotton at 60 °C was statically the same as that of ATS at 95 °C when total DS of ECS was 0.0443 or higher.