Colorimetric determination of boric acid in prawns, shrimp, and salted jelly fish by chelate extraction with 2-ethyl-1,3-hexanediol.

Borate was directly chelate-extracted from foods with 5% 2-ethyl-1,3-hexanediol (EHD) in n-hexane-n-butyl acetate mixture (8 + 2), from which borate was selectively transferred into 1% NaOH, since EHD-chelated boron did not react with curcumin to develop color. Finally, an aliquot of the alkaline solution was acidified with HCl and reacted with curcumin in a rotary evaporator. Color development was increased by heating for 8 min at 80 degrees C under reduced pressure of 16 mm Hg. Frozen shrimp and prawns (peeled and with shells) and salted jelly fish were analyzed by the proposed method. Results were compared with the contemporary official method of Japan based on curcumin reaction on an incinerated sample. Over 90% of the boric acid was recovered by the proposed method when samples were fortified with 20 ppm boric acid. Recoveries were superior to those of the official method especially for shrimp and prawns with shells and salted jelly fish. Detection limit of boric acid is 1 ppm. Moreover, the method requires only about 1 hr for analysis of one sample, making it suitable for routine analysis.     

Performance of using opposing homozygotes for paternity testing in Japanese Black cattle

Genome-wide single nucleotide polymorphism (SNP) markers in Japanese Black cattle enable genomic prediction and verifying parent–offspring relationships. We assessed the performance of opposing homozygotes (OH) for paternity testing in Japanese Black cattle, using SNP genotype information of 50 sires and 3,420 fattened animals, 1,945 of which were fathered by the 50 genotyped sires. The number of OH was counted for each sire–progeny pair in 28,764 SNPs with minor allele frequencies of ≥0.05 in this population. Across all pairs of animals, the number of OH tended to increase as the pedigree-based coefficient of relationship decreased. With a threshold of 288 (1% of SNPs) for paternity testing, most sire–progeny pairs were detected as true relationships. The frequency of Mendelian inconsistencies was 2.4%, reflecting the high accuracy of pedigree information in Japanese Black cattle population. The results indicate the utility of OH for paternity testing in Japanese Black cattle.     

Development of wooden portal frame structures with improved columns

In Japan, the lifetime cycle of most housing lasts around 20–30 years. A governing factor in this respect is poor durability due to old-fashioned use of the house. As a solution of this problem, houses can be built with a skeleton structure that allows free partition of spaces by future owners. To develop the skeleton structure effectively, multistory frames with spans of 6 to 10 m are required. For this reason, attention has been focused on the behavior of multistory timber frame structures. In this article, two types of wooden portal frame structures are proposed. Both structures have improved vertical columns with short horizontal members glued in. The aim of this study was to investigate structurally effective solutions with these types of columns. The first type of the new structure changed the location of the moment-transmitting ductile connection with the improved columns. The second type of structure used an extended panel zone. Nine portal frame specimens were tested. The stiffness values were improved by around 1.7 and 3.5 times when compared with the control, and the strength was improved by around 1.25 and 1.45 times.     

Spectrophotometrical characteristics in the near infrared region in beech (<Emphasis Type="Italic">Fagus crenata</Emphasis>) and pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) litters at the various decomposing stages

We examined the relationships between the absorptional characteristics in the near infrared region and the chemical changes of decomposing beech (Fagus crenata) and pine (Pinus densiflora) litters. Spectra as well as the concentrations of chemical substances approached each other and converged with decomposition, although both initial characteristics differed markedly between beech and pine. This indicated that the fundamental chemical structures were almost the same, although their organochemical composition differed. Specific absorption bands for lignin, polysaccharide, and protein were identified at 2,140 and 1,670 nm, 2,270, 1,720, 1,590, and 1,216 nm, and 2,350 nm, respectively. Absorbance at 1,670 nm, peculiar band of aromatics, showed a positive correlation with lignin concentration, which suggested the relative increment of aromatics due to condensed lignin in decomposing litters. Absorbance at 2,140 nm, characterized as the C–H bond in HRC = CHR, showed a negative correlation with lignin concentration, which suggested the decrements of some structures such as side-chains in lignin polymers unrelated to aromatics. Absorbance at 2,270, 1,720, and 1,216 nm, specified to O–H/C–O/C–H bonds in saccharide, might reflect the change of polysaccharide during decomposition because they showed a positive correlation to polysaccharide concentration. In the same way, absorbance at 2,350 nm, identified to the C–H/CH₂ bonds in protein, showed a negative correlation to nitrogen concentration in decomposing litters, which might indicate that the C–H/CH₂ bonds in protein decreased with decomposition due to microbial consumption of carbon in protein. Our findings suggested the possibility that the spectral changes indicate the litter digestibility during decomposition and that also explain the compositional change in decomposing litters.     

Tree size dependence of litter production, and above-ground net production in a young Hinoki (Chamaecyparis obtusa) stand

The study was carried out in a 9-year-old hinoki cypress (Chamaecyparis obtusa (Sieb. et Zucc.) Endl.), stand over a span of three years from July 1992 to June 1995, primarily to predict litter production from exteral tree dimensions by combining open-top clothtrap and clipping methods. Litter production was virtually concentrated in October and November. Stem cross-sectional area at the crown base was proved to be the reliable predictor of litter production, and that single regression model was evolved irrespective of year. The regression model had proportional constants of 2.696 × 10⁻² and 3.540 × 10⁻² kg cm⁻² year⁻¹ for leaf litter and total litter production, respectively. Utilizing the model, leaf litter production of the stand was assessed to be 5.04, 5.12, and 4.99, and total litter production to be 6.48, 6.58, and 6.40 Mg ha⁻¹ year⁻¹ for the first, second and third year, respectively. Biomass increment was 6.67, 7.80, and 7.70, tree mortality was 0.15, 0.13, and 0.41, and insect grazing was 0.09, 0.05, and 0.002 Mg ha⁻¹ year⁻¹ for the first, second and third year, respectively. Above-groud net production was therefore 13.39, 14.55, and 14.51, Mg ha⁻¹ year⁻¹, and biomass accumulation ratio (biomass/net production) was 1.86, 2.21, and 2.76 year for the first, second and third year, respectively. Considering data from earlier studies and the results of this study, biomass accumulation ratio,BAR (year), of hinoki stands was best related to above-ground biomass,y (Mg ha⁻¹), using the power function:BAR=0.112y ^0.936. Excluding seedling stands, leaf efficiency (above-ground net production per unit leaf mass) of hinoki stands was 0.91±0.02 (SE) Mg Mg⁻¹ year⁻¹, irrespective of stand biomass or age.     

Dependence of the aboveground respiration of hinoki cypress (Chamaecyparis obtusa) on tree size

Nighttime respiration was measured at monthly intervals over one year on the aboveground parts of five sample trees in an 8-year-old hinoki cypress (Chamaecyparis obtusa (Sieb. et Zucc.) Endl.) stand, by an enclosed standing-tree method. The respiration rate rose rapidly from early spring to a maximum in June, and decreased abruptly in July and then gradually toward autumn and winter. The seasonal change in the respiration rate was synchronized with stem volume increment rather than with monthly mean air temperature. The respiration rate, r, of individual trees increased with increasing tree dimensions, such as stem volume, v(S), and stem girth at the base of the live crown, G(B). The dependence of respiration rate on tree size was successfully represented by a power function. The r - v(S) dependence was rather stronger than the r - G(B) (2) dependence, especially toward the end of the growing season (from July to September). The observed respiration rate was almost the same as the respiration rate corrected for the monthly mean air temperature. The annual respiration of individual trees was directly proportional to their phytomass or to its increment. Although the annual respiration of individual trees decreased proportionally to the square root of the leaf mass, it decreased abruptly in the range close to the smallest sample tree. Combining the monthly relationship between respiration rate and stem volume with the tree size distribution in the stand, the stand aboveground annual respiration was estimated to be 20.4 Mg CO(2) ha(-1) year(-1) (= 12.5 Mg dry mass ha(-1) year(-1)) for an aboveground biomass of 17.4 Mg ha(-1) with an annual increment of 6.51 Mg ha(-1) year(-1), i.e., the stand aboveground annual respiration amounted to the equivalent of 72% of the biomass or to almost twice the biomass increment.     

Stem water transport of Lithocarpus edulis, an evergreen oak with radial-porous wood

The stem water conducting system of an evergreen broad-leaved oak, Lithocarpus edulis (Mak.) Nakai, was investigated. Evergreen broad-leaved oaks (Lithocarpus, Castanopsis, Cyclobalanopsis, Quercus) belonging to the Quercoideae are a major component of Asian monsoon forests, and are characterized by the possession of radial-porous wood. A characteristic of radial-porous wood is the development of aggregate rays between radially oriented files of vessels. We measured the distribution of vessel lumen diameters in a stem cross section and calculated the theoretical water conductivity of the wood. The radial profile of the heat pulse velocity (HPV) was measured for an intact whole tree under field conditions and compared with the theoretical distribution of water conductivity. Soft X-ray photographs of frozen stem sections indicated that most of the vessel lumina were filled with water, including those of vessels more than 20 years old. Even when vessels were relatively wide (lumen diameters > 100 microm), cavitation was negligible. The rate of water uptake from the cut stem base correlated closely with HPV (r = 0.96), and HPV closely reflected the mean volume flow per stem sectional area (SFVS) around the sensor probes. However, the ray tissue sharply inhibited heat transfer, and the positioning of the probes strongly affected the absolute value of HPV. It was also found that HPV more closely reflected the mean sap flow velocity in the vessels than did SFVS.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Plasma fluctuation in estradiol-17β and bone resorption markers around parturition in dairy cows

Blood samples were obtained sequentially from 10 dairy cows around the time of parturition to assess plasma fluctuations in estradiol-17β (E₂) levels in association with those of several bone resorption markers. Plasma E₂ concentration increased sharply a few days prepartum and decreased quickly after parturition. In terms of bone resorption markers, the plasma level of tartrate-resistant acid phosphatase isoform 5b (TRAP5b) rose significantly, commencing 1 week prepartum, and was maintained at this level to a few days postpartum. The plasma concentration of carboxyterminal collagen cross-links of type-I collagen (CTx) increased significantly after parturition. These observations suggest that osteoclast-mediated bone resorption was activated after parturition when plasma E₂ concentrations decreased.