Comparison of outcomes following treatment of septic calcaneal bursitis by needle or bursoscopic lavage: A retrospective study of 29 horses

Sepsis of the calcaneal bursae (CB) presents significant treatment challenges with limited clinical data available in the literature. The objective of this retrospective cohort study was to assess the clinical outcomes associated with CB lavage using either a through-and-through needle or bursoscopic technique. Clinical records of 29 horses treated for septic calcaneal bursitis using either technique between 2005 and 2019 were reviewed. Fisher’s exact test was used to assess statistical significance between first surgical technique and success at first surgery (i.e. not requiring >1 lavage), survival to discharge and return to work (RTW). Bursoscopy was performed in 13/29 (44.8%) cases, and needle lavage in 16/29 (55.2%). In the needle group, 12 (75%) horses were discharged following the first surgery. Four had repeat interventions; two (12.5%) had needle lavage and two (12.5%) had bursoscopy. Of the two horses to have repeat needle lavage, one was subjected to euthanasia and one discharged, and of the two that underwent bursoscopy, one was discharged and one received a third bursoscopy prior to discharge. In the bursoscopy group, seven (53.8%) were discharged and three (23.1%) were subjected to euthanasia following the first surgery. Three (23.1%) received a second bursoscopic lavage with one discharged, one subjected to euthanasia and one having a third bursoscopic lavage prior to discharge. Overall, 18/24 (75%) followed up cases RTW, 10 (55.5%) from the needle group, eight (44.4%) the bursoscopy group. No statistically significant differences between first surgical technique used and success at first surgery (no subsequent lavage(s) required), survival to discharge or return to work were detected. The main limitations of this study are that it is a retrospective study, has a small population with limited statistical power and potential selection bias. No statistically significant differences existed between the outcomes of the two techniques, contrary to the belief that bursoscopic lavage is superior. Larger, multicentred studies, with greater statistical power are required to further assess this relationship.     

Impact of weather variables and season on sporulation of Phytophthora pluvialis and Phytophthora kernoviae

Phytophthora pluvialis and Phytophthora kernoviae are the causal agents of important needle diseases on Pinus radiata in New Zealand. Little is known about the epidemiology of the diseases, making the development of control strategies challenging. To investigate the seasonality and climatic drivers of sporulation, inoculum traps, consisting of pine fascicles floating on water in plastic containers, were exchanged fortnightly at five sites in P. radiata plantations between February 2012 and December 2014. Sections of needle baits were plated onto selective media and growth of Phytophthora pluvialis and P. kernoviae recorded. To explore the generalizability of these data, they were compared to detection data for both pathogens from the New Zealand Forest Health Database (NZFHDB). Further, equivalent analyses on infection of Rhododendron ponticum by P. kernoviae in Cornwall, UK allowed the comparison of the epidemiology of P. kernoviae across different host systems and environments. In New Zealand, inoculum of P. pluvialis and P. kernoviae was detected between January–December and March–November, respectively. Inoculum of both species peaked in abundance in late winter. The probability of detecting P. pluvialis and P. kernoviae was greater at lower temperatures, while the probability of detecting P. pluvialis also increased during periods of wet weather. Similar patterns were observed in NZFHDB data. However, the seasonal pattern of infection by P. kernoviae in the UK was the opposite of that seen for sporulation in New Zealand. Phytophthora kernoviae was likely limited by warmer and drier summers in New Zealand, but by colder winter weather in the UK. These results emphasize the importance of considering both environmental drivers and thresholds in improving our understanding of pathogen epidemiology.     

Innovation strategies for smart specialisation (RIS3): Past,present and future research

The recent change in the regional development strategy of the European Union (EU) results in an important need to study the terms of change and their respective implications. This study seeks, through a bibliometric analysis, to ascertain the developments taking place in studies on research and innovation strategies for smart specialisation (RIS3) to identify shortcomings and opportunities for future research. This bibliometric review drew upon the Scopus database with the sample selected containing all the articles containing the keywords “Research and Innovation Strategies for Smart Specialisation” or “RIS3.” This correspondingly reports how some authors maintain that the path the EU should take involves imitative innovation. Meanwhile, others propose that each region should specialise in those industries that are already established there and thus avoid targeting any areas they do not already know/specialise in. Our findings detail six clusters in RIS3 research, which help in contextualising the literature review: (a) business discovery; (b) smart specialisation; (c) innovation; (d) specialisation; (e) regional policies; and (f) regional development. This study furthermore sets out perspectives for future lines of research and correspondingly seeks to convey a vast theoretical basis that may serve as the point of departure for future studies.     

The role of ear environment in postharvest susceptibility of maize to toxigenic Aspergillus flavus

A kernel screening assay (KSA) was used to assess the genetic and environmental effects on the vulnerability of maize to aflatoxin accumulation. Kernels of 26 inbred lines that had been grown in seven environments, and 190 lines of the Intermated B73xMo17 (IBM) population grown in one location in the United States, were inoculated with a toxigenic strain of A. flavus and incubated in the dark at 30°C for 6 days. Percent kernel colonization (PKC), sporulation and aflatoxin were influenced by the maize genotypes (G), the location (“ear environment” or E) and the GxE interactions. Overall, low broad‐sense heritabilities were observed for PKC, sporulation and aflatoxin. PKC was significantly correlated with sporulation in all environments. Aflatoxin was positively correlated with colonization for two and with sporulation for all ear environments. Higher grain sulphur or magnesium in IBM was associated with less colonization or aflatoxin. Postharvest susceptibility of maize to aflatoxin is thus influenced by factors that are modulated by the ear environment. In a KSA, sporulation could be a proxy test for aflatoxin accumulation.     

Development of colchicine‐induced tetraploid St. Augustinegrass (Stenotaphrum secundatum) lines

St. Augustinegrass is well suited for lawns and commercial landscapes. While many genotypes are cross‐fertile, all cultivars are propagated vegetatively in sod production. To ensure varietal purity, development of sterile triploid hybrids by crossing tetraploid and diploid genotypes has been successfully used in other warm‐season turfgrasses. Applying this model in St. Augustinegrass would be beneficial to sod producers and turf managers who require purity for certification and uniformity for performance, respectively. This study was conducted to develop colchicine‐induced tetraploid lines of St. Augustinegrass. Seeds of cultivar ‘Raleigh’ were treated with four colchicine concentrations at four exposure times. A non‐treated control was included among the treatments. Seedlings that germinated were screened for genome size changes using flow cytometry. Line DSA 13005 and two progeny lines derived through selfing, DSA 16001 and DSA 16016, were corroborated as tetraploids (2n = 4x = 36) through chromosome counts. These lines will be used in future breeding efforts to attempt development of sterile triploid cultivars of St. Augustinegrass.     

Proteomic profiles during adventitious rooting of Eucalyptus species relevant to the cellulose industry

New Forests - Adventitious rooting (AR) is an obligatory step for vegetative propagation of commercial woody species. Paper industries have interest in Eucalyptus globulus Labill and its hybrids...     

Effects of Feeding Frequency on Apparent Energy and Nutrient Digestibility/Availability of Channel Catfish,Ictalurus punctatus,Reared at Optimal and Suboptimal Temperatures

This study examined the effects of feeding frequency (daily versus every other day [EOD]) on nutrient digestibility/availability of channel catfish, Ictalurus punctatus, reared at optimal (30 C) and suboptimal (24 C) temperatures. A 28% protein practical diet was used as the test diet, and chromic oxide was used at 0.75% of the diet as a maker. Twenty channel catfish of a mean weight of 141 g/fish were stocked into 12 flow‐through aquaria (110 L). Fish were fed daily or EOD to apparent satiation for 7 d before fecal samples were collected by the dissection method. Fish fed EOD to apparent satiation consumed more diet on days fed than those fed daily, and fish reared at 30 C consumed more diet than those reared at 24 C. Neither feeding frequency nor water temperature significantly affected apparent digestibility coefficients for energy and protein and apparent availability coefficients for total amino acids. Results show no advantage by feeding EOD over feeding daily on nutrient digestibility and diet utilization efficiency.     

The efficiency of nitrogen in cattle manures when applied to a double‐annual forage cropping system

The use of cattle manure (CM) for fertilization presents challenges for optimizing nitrogen (N) use. Our work aimed to assess N efficiencies, in a 6‐year experiment with three biennial rotations of four crops: oat–sorghum (first year) and ryegrass–maize (second year) in a rainfed humid Mediterranean area of Spain. Fertilization treatments included the following: control (no N), 250 kg mineral N ha^?1 year^?1 (250MN), three CM rates (supplying 170, 250 and 500 kg N ha^?1 year^?1) and four treatments where the two lowest CM rates were complemented with either 80 or 160 kg mineral N ha^?1 year^?1. Treatments were distributed randomly in each of three blocks. Maximum dry‐matter yield (~44–49 t ha^?1 rotation^?1) was achieved in the third rotation, and only the control and the 170CM yielded significantly less. Within the limitations of the EU Nitrate Directive, the N steady state supply of 170CM always requires a complement of mineral N (80 kg N ha^?1) to maximize N agronomic efficiency. The maximum N‐fertilizer replacement value (250CM vs. 250MN) was 0·67, without significant differences between the two treatments in other N‐related efficiency indexes, which indicates that plants took advantage of residual‐N effects. Nitrogen losses by leaching in the 250CM treatment were around 5–7% of the N applied. This reinforces the sustainability of manure recycling in long cropping seasons.     

Evaluation of mechanical properties of jute/glass/carbon fibers reinforced hybrid composites

A study on the tensile and flexural properties of jute-glass-carbon fibers reinforced epoxy hybrid composites in inter-ply configuration is presented in this paper. Test specimens were manufactured by hand lay-up process and their tensile and flexural properties were obtained. The effects of the hybridization, different fibers content and plies stacking sequence on the mechanical properties of the tested hybrid composites were investigated. Two-parameter Weibull distribution function was used to statistically analyze the experimental results. The failure probability graphs for the tested composites were drawn. These graphs are important tools for helping the designers to understand and choose the suitable material for the required design and development. Results showed that the hybridization process can potentially improve the tensile and flexural properties of jute reinforced composite. The flexural strength decreases when partial laminas from a carbon/epoxy laminate are replaced by glass/epoxy or jute/epoxy laminas. Also, it is realized that incorporating high strength fibers to the outer layers of the composite leads to higher flexural resistance, whilst the order of the layers doesn’t affect the tensile properties.