Disruption of <Emphasis Type="Italic">Juniperus thurifera</Emphasis> woodland structure in its northwestern geographical range: potential drivers and limiting factors

Enhancement of Juniperus thurifera recruitment and colonisation by oak and pine species has been related at the local level to changes in livestock pressure. We used forest inventory data from Castilla y León Autonomous Region (Central Spain), an area comprising 34% of the world range of J. thurifera, to assess whether this process is occurring at a larger scale. We compared tree composition and density in a set of 659 permanent plots over a 10-year period. Logistic models and redundancy analysis were used to assess the effect on this process of parameters such as livestock pressure, propagule availability and climatic conditions. Between 1992 and 2002, juniper woodlands became denser (1.31% juniper stem year⁻¹) and tree diversity increased due to rapid colonisation by oaks and pines (2.21% occupied plots year⁻¹). In addition, the presence of juniper increased in other types of forests at a moderate rate (0.6% y⁻¹). Thus, we observed both a disruption of the borders between current forest types and a generalised increase in α-diversity of tree species. The seed source was the main factor explaining colonisation rate, suggesting that the pace of colonisation is critically constrained by the spatial configuration of the landscape and the local propagule availability of the colonising species. If the current colonisation trends continue, monospecific juniper woodlands will become very scarce by the end of the twenty-first century.     

Changes in Eucalyptus globulus Labill. saplings growth and physiological parameters following fire-induced stem and crown damage in a plantation in north-western Spain

Stems and crowns of young Eucalyptus globulus Labill. saplings were experimentally damaged by fire to assess the short-term effects on tree growth and selected physiological parameters (stem sap flow density, electrical resistance of stem cambium and leaf stomatal conductance). Four different treatments were considered: partial stem damage (42 % of the stem circumference girdled by the direct application of heat in the cambium zone), crown foliage damage (56 % of crown volume scorched by heating the foliage with a torch), combined stem and crown damage, and no damage (control). Saplings displayed high sensitivity to crown scorching, in terms of basal area growth. The relative growth of the basal area of crown-damaged and stem + crown-damaged trees was, respectively, 3.1 and 6.2 times lower than that of undamaged trees for the 4 months following treatment. In contrast, stem injury alone did not have any negative effect on stem growth. The results suggest that tree growth is scarcely affected by low intensity surface fire and prescribed burning that do not affect the crown. Sap flow density, cambial electrical resistance and leaf stomatal conductance were useful indicators of the loss of physiological activity caused by fire. Although in the case of partial crown damage these parameters reflected a slight compensatory effect, the response was not sufficient to balance the loss of photosynthetic area. The study only focused on the initial effects of fire-related damage, and further research is clearly needed to determine the long-term effects of such damage.     

Population variability based on the morphometry and chemical composition of the acorn in Holm oak (Quercus ilex subsp. ballota [Desf.] Samp.)

We have studied in this work the natural variability in Holm oak (Quercus ilex subsp. ballota) by analyzing acorn morphometry and chemical composition in 13 populations from the Andalusia region (southern Spain). Acorn morphometry showed statistic significant differences between the populations with a higher acorn weight, length, and diameter in the northern provenances (TJA, GSE, CTH, CHU, APS, and PCO), while the Southern provenances (RMA, SAA, CCO, BCA, and SCA) showed lower value that even decreased with the altitude. Acorn chemical composition also showed statistic significant differences between populations. Morphometry and chemical composition data were subjected to clustering analysis, and two major clusters were detected. This analysis showed that northern populations (CTH, TJA, SCA, CHU, PCO, GSE, and APS) showed a tendency to present values highest in acorn weight (5.42?g vs. 3.21?g); acorn length (37.21?mm vs. 28.73?mm); acorn diameter (16.12?mm vs. 13.79?mm); ash (1.88% vs. 1.55%); protein (4.82% vs. 4.38%); fat (12.55% vs. 9.92%); and oleic acid (66.93 vs. 66.4%). On the contrary, Southern populations (SSA, VJA, CCO, BCA, RG, and RMA) showed a tendency to present values lowest in sugar (10.28% vs. 11.25%); energy (20,076.71?kJ/kg vs. 20,149.26?kJ/kg); palmitic (16.11% vs. 16.39%) and linoleic acids (13.07% vs. 13.11%). The populations studied here seemed to integrate acorn morphology and chemical composition related to environmental conditions of the original provenances. These data have provided biochemical markers that help establish phylogenic associations between populations and also reveal potentially account as an alternative source for dietary nutrition.     

Geographically structured and temporally unstable growth responses of Juniperus thurifera to recent climate variability in the Iberian Peninsula

Geographically structured tree-ring networks are needed to fully understand the spatiotemporal variability in climatic sensitiveness of trees and to study their future responses to global warming. We aim to identify the spatially constrained structure of radial-growth patterns of the Spanish juniper (Juniperus thurifera L.) and to assess whether their climate–growth responses were unstable during the late twentieth century. Tree–ring width chronologies were built for 13?J. thurifera stands in Spain using dendrochronological methods and related to monthly climatic data. Sites were grouped according to their growth patterns using hierarchical cluster analysis. The relationships among geographical, climatic and stand features and their influence on radial growth were evaluated using redundancy analysis. The climate–growth relationships and their temporal stability were assessed using Pearson’s and moving bootstrapped correlations, respectively. Stands formed three geographical groups according to their high-frequency growth variation: North West and Centre, North East and South East. We found that J. thurifera radial-growth patterns depended on geographical and climatic factors, but not on the stand structure, and responded to a northwest–southeast gradient of decreasing rainfall and influence of Atlantic Westerlies and Mediterranean cyclonic activity. The positive response to June precipitation was unstable during the late twentieth century and started earlier in populations from western mesic sites than in eastern xeric sites. This pattern may be related to either decreasing water availability in western than in eastern sites or the resilience of J. thurifera growth from xeric sites in response to the increasing summer aridity.     

From points to numbers: a database-driven approach to convert terrestrial LiDAR point clouds to tree volumes

Data provided by airborne LiDAR (Light Detection and Ranging) techniques are commonly used for measuring and monitoring of forest resources. In the last years, terrestrial laser scanning systems have also gained increasing attention as a ground-based application for individual tree measurements. The database-driven approach described in this article focuses on the calculation of single tree stem volumes from terrestrial laser scan data. A straightforward way of determining the volume of upright cylindrical objects is presented. Three-dimensional point data are split up into cylindrical sections whose diameters are used as basis for volume calculations. Tests conducted with a simple tree stem model show that results produced by the algorithm differ by less than 1?% from results obtained by manual section-wise cubing, which was applied to gather reference data. The method we present offers a perspective on non-destructive techniques of volume data acquisition for forest resource assessments. It is capable of reducing the error of single tree biomass estimations which in turn would improve the reliability of biomass inventories. Also, other tasks such as forest inventories or forest management plans can benefit from more accurate estimations and smaller prediction errors.     

Impact of the pinewood nematode, Bursaphelenchus xylophilus, on gross calorific value and chemical composition of Pinus pinaster woody biomass

The pinewood nematode (PWN), Bursaphelenchus xylophilus, the causal agent of the pine wilt disease, has been detected in several regions of Portugal affecting Pinus pinaster, a coniferous species of a great economic value. The nematodes, migrating through resin canals and feeding on parenchyma cells, induce rapid metabolic changes in ray parenchyma cells, cavitation areas, and denaturation and necrosis of parenchyma and cambial cells. To understand how anatomic changes and biochemical incidences of tree defense reactions affect the technological parameters of the wood, the gross calorific value (GCV) and chemical composition of PWN-infected and -uninfected P. pinaster wood were evaluated. The GCV was determined using Parr 6300 Automatic Isoperibol Calorimeter, and chemical composition analysis was performed by determining the contents of carbon, hydrogen, nitrogen, sulfur and Ash on complete and instant oxidation of samples by “flash” combustion. The Student’s t test with Welch correction was used for statistical data analysis. The difference between the GCV and chemical composition for PWN-infected and -uninfected P. pinaster wood was statistically significant for the GCV and for hydrogen and nitrogen contents. The carbon, oxygen, sulfur and Ash contents did not differ statistically. The GCV of PWN-infected wood varied between the highest value of hardwood and the lowest value of softwood. This interdisciplinary study stresses the important technological and economic aspects, namely the impact of PWN on wood properties and the suitability of infected P. pinaster wood for use in the wood-processing and energy industries.     

Influence of the stage for anther excision and heterostyly in embryogenesis induction from eggplant anther cultures

In this work we address two aspects of eggplant flower biology potentially involved on the efficiency of anther culture: the selection of the best floral stage to extract anthers for culture, and the effect of heterostyly in the identification of suitable buds and anthers. For 12 different accessions, we determined morphological criteria (length ranges) to identify buds and anthers enriched in vacuolate microspores and young bicellular pollen, the stages most responsive to embryogenesis induction. While these microspore/pollen stages were the most responsive when isolated and cultured in liquid medium, we observed that culture of anthers containing these stages is not the best choice. Instead, the highest response was found for younger anthers, containing mostly young and mid microspores. We analyzed eggplant anther walls and found that their particular thickness may be behind this apparent discrepancy, since they may delay the diffusion of inducing factors to the anther locule, reducing their effect over inducible microspores. Thus, the culture of younger anthers would allow for younger microspores to grow up to the inducible stages while factors are entering the locule. We also analyzed the embryogenic response of short and long-styled buds present in Cristal, a heterostylic cultivar. Our results demonstrated that each floral morph produced buds and anthers of different lengths, but equally useful for anther culture, since similar amounts of embryos were produced. The practical application of these results may improve the efficiency of anther culture not only in these cultivars, but in others also presenting thick anther walls and heterostyly.     

Transfer of architectural traits from perennial Helianthus mollis Lam. to sunflower (H. annuus L.) and localisation of introgression

Common sunflower (i.e., Helianthus annuus) is occasionally crossed with other Helianthus species to gain favourable agronomic traits. An interspecific cross between H. annuus and Helianthus mollis was used to examine events that occurred during the five first generations. First generation hybrid plants were verified using GISH, and F₁ hybrid (#17) was back-crossed to common sunflower to obtain BC₁ (#4) and BC₂ (#21). Some BC₂ progeny possessed new traits, i.e., compact (Compact plant architecture is due to short inter-node length, short petiole length and short leaf lamina length) architecture without and with corrugated leaves, which were not observed in the parents. These traits were selected for and fixed after the BC₂-S₃ (#18) to produce a H. mollis introgression line (namely HM374). Although the size of the population was small, we tentatively construct a genetic map using data from the BC₂ generation. Two linkage groups were identified carrying H. mollis specific AFLP markers that were associated with compact plant architecture, and one unlinked marker was shown to explain variation for the corrugated leaves. Introgression line HM374 was used to test the inheritance of compact plant architecture in a cross with an elite high oleic line, OL75HO. Microsatellite (SSR) markers were used to genotype F₁ and F₂ offspring’s. Our data suggested that the line HM374 was still heterozygous for introgression after eight generations. HM374 displays new architecture traits (i.e. compact architecture with or without corrugated leaves) and carries H. mollis fragments anchored on LG1 and LG11 of sunflower public map.