Estimation of residual strain and stress in interply hybrid composite using fiber bragg grating sensor

Residual stress and strain buildup in the hybrid carbon/phenolic (CP) composite was estimated using embedded fiber Bragg grating (FBG) sensors. Two different carbon fabrics made from polyacrylonitrile (PAN) and rayon fibers were used. The partially delaminated hybrid composite was fabricated for the real-time and nondestructive estimation of the residual stress and strain during the cure process. The strain measured by FBG sensors embedded in the delaminated region was assumed to represent the thermal deformation of each reinforcing lamina. After the cure process was finished, PAN-based (PC) and rayon-based (RC) carbon laminae were under compression and tension, respectively, in in-plane direction because the strain of RC was 4.4 times lager than that of PC. The residual stresses of PC and RC laminae under the assumption of elasticity were −16.9 and 7.92 MPa, respectively. The experimental results showed good agreements with those by FEM analysis.     

Prediction and measurement of residual stresses in injection molded parts

Residual stresses were predicted by a flow analysis in the mold cavity and residual stress distribution in the injection molded product was measured. Flow field was analyzed by the hybrid FEM/FDM method, using the Hele Shaw approximation. The Modified Cross model was used to determine the dependence of the viscosity on the temperature and the shear rate. The specific volume of the polymer melt which varies with the pressure and temperature fields was calculated by the Tait’s state equation. Flow analysis results such as pressure, temperature, and the location of the liquid-solid interface were used as the input of the stress analysis. In order to calculate more accurate gap-wise temperature field, a coordinate transformation technique was used. The residual stress distribution in the gap-wise direction was predicted in two cases, the free quenching and the constrained quenching, under the assumption that the shrinkage of the injection molded product occurs within the mold cavity and that the solid polymer is elastic. Effects of the initial flow rate, packing pressure, and mold temperature on the residual stress distribution was discussed. Experimental results were also obtained by the layer removal method for molded polypropylene.     

Formation,characterization, and glucose response in mice to rice starch with low digestibility produced by citric acid treatment

The optimum conditions for producing rice starch enriched in slowly digestible and resistant fractions by citric acid treatment determined by a response surface methodology (RSM) model equation, were: reaction temperature, 128.4 °C; reaction time, 13.8 h; and citric acid, 2.62 mmol/20 g starch. The slowly digestible and resistant starch fractions of the optimally acid-treated rice starch totalled 54.1%, which was 28.1% higher than the control. The slowly digestible and resistant fractions of the acid-treated rice starch did not differ significantly after heat treatment, whereas those of raw rice starch decreased by 49.6–63.8%, depending on the type of heat treatment (cooking at 100 °C or autoclaving). The slowly digestible fraction of the acid-treated starch increased by 8.9–14.2%. After autoclaving, the glucose response of the acid-treated starch was lower than untreated starch, but similar to that of Novelose 330. After heat treatment, the rate of blood glucose decrease was slower for the acid-treated starch than for Novelose 330. Compared to raw rice starch, the acid-treated starch exhibited increases in apparent amylose content, blue value, dextrose equivalent, cold-water solubility and transmittance, and decreases in wavelength of maximum absorbance, viscosity, and gel-forming ability.     

Confocal microscopy measurement of the fiber orientation in short fiber reinforced plastics

To determine three-dimensional fiber orientation states in injection-molded short fiber composites a CLSM (Confocal Laser Scanning Microscope) is used. Since the CLSM optically sections the composites, more than two cross-sections either on or below the surface of the composite can be obtained. Three dimensional fiber orientation states can be determined with geometric parameters of fibers on two parallel cross-sections. For experiment, carbon fiber reinforced polystyrene is examined by the CLSM. Geometric parameters of fibers are measured by image analysis. In order to compactly describe fiber orientation states, orientation tensors are used. Orientation tensors are determined at different positions of the prepared specimen. Three dimensional orientation states are obtained without the difficulty in determining the out-of-plane angles by utilizing images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell-core structure along the thickness of the specimen.     

Re-examination of the standard cultivation practices of rice in response to climate change in Korea

The impact of climate change has been simulated or estimated to bring about yield decline and quality deterioration of rice in Korea, a temperate country. To cope with these negative impacts, here we propose likely changes in the standard cultivation practices of rice in consideration of the current information on the progress/prediction of climate change and related physiological aspects of rice. Shifting grain-filling period could be a promising choice to optimize temperature for rice grain-filling, a crucial growth stage to productivity, hence providing rice plants with sufficient duration and solar radiation for the period. This choice, however, shortens days to flowering by the additive combined effects of high temperature by delayed transplanting, temperature rise itself by climate change, and accelerated phase change of rice by high temperature and short day-length. These combined effects may delay the time of transplanting in a great extent, hence reducing biomass accumulation of rice before flowering. In these conditions, recovering decreased biomass production is the key concern for rice productivity. This includes raising healthy seedlings by omitting the covering process, dense planting, and nutrient management to enhance plant’s uptake activity. Current standard water management, especially mid-term drainage and intermittent irrigation, would have more importance in the future since they mitigate methane emission from the paddy. Field monitoring for weeds and pests would be an important first step to identify newly developing or thriving species for establishing subsequent controlling strategies. Earlier weed control should be emphasized through adjusting time of herbicide application.     

Attenuating Effects of Dieckol on High-Fat Diet-Induced Nonalcoholic Fatty Liver Disease by Decreasing the NLRP3 Inflammasome and Pyroptosis

Nonalcoholic fatty liver disease (NAFLD), which promotes serious health problems, is related to the increase in the nucleotide-binding oligomerization domain-like receptor family, pyrin domain containing 3 (NLRP3) inflammasome and pyroptosis by a high-fat diet (HFD). Whether dieckol (DK), a component of Ecklonia cava extracts (ECE), attenuated NAFLD in an HFD-induced NAFLD animal model was evaluated. The expression of high mobility group box 1/Toll-like receptor 4/nuclear factor-κB, which initiated the NLRP3 inflammasome, was increased in the liver of HFD-fed animals and significantly decreased with ECE or DK administration. The expression of NLRP3/ASC/caspase-1, which are components of the NLRP3 inflammasome, and the number of pyroptotic cells were increased by HFD and decreased with ECE or DK administration. The accumulation of triglycerides and free fatty acids in the liver was increased by HFD and decreased with ECE or DK administration. The histological NAFLD score was increased by HFD and decreased with ECE or DK administration. The expression of lipogenic genes (FASN, SREBP-2, PPARγ, and FABP4) increased and that of lipolytic genes (PPARα, CPT1A, ATGL, and HSL) was decreased by HFD and attenuated with ECE or DK administration. In conclusion, ECE or DK attenuated NAFLD by decreasing the NLRP3 inflammasome and pyroptosis.     

Internal fruit rot of netted melon caused by <Emphasis Type="Italic">Pantoea ananatis</Emphasis> (=<Emphasis Type="Italic">Erwinia ananas</Emphasis>) in Japan

An internal fruit rot with a malodor was found in netted melons (Cucumis melo L.) in commercial greenhouses in Kochi Prefecture, Japan, in 1998, despite their healthy appearance and lack of water-soaking or brown spots on the surface. A yellow bacterium was consistently isolated from the affected fruits. To confirm the pathogenicity of eight representative isolates of the yellow bacterium, we stub-inoculated ovaries (immature-fruits) 5–7 days after artificial pollination, with a pin smeared with bacteria. After the melon fruits had grown for 60 more days, an internal fruit rot resembling the natural infection appeared, and the inoculated bacterium was reisolated. The melon isolates had properties identical with Pantoea ananatis, such as gram-negative staining, facultative anaerobic growth, indole production, phenylalanine deaminase absence, and acid production from melibiose, sorbitol, glycerol, and inositol. Phylogenetic analysis based on 16S rDNA sequences showed that the melon bacterium positioned closely with known P. ananatis strains. The melon bacterium had indole acetic acid (IAA) biosynthesis genes (iaaM and iaaH) and a cytokinin biosynthesis gene (etz). The bacterium could be distinguished from the other ‘Pantoea’ group strains by rep-PCR genomic fingerprinting. From these results, the causal agent of internal fruit rot was identified as a strain of P.ananatis [Serrano in (Philipp J Sci 36:271–305, 1928); Mergaert et al. in (Int J Syst Bacteriol 43:162–173, 1993)]. The nucleotide sequence data reported are available in the DDBJ database under accessions AB297969, AB373739, AB373740, AB373741, AB373742, AB373743 and AB373744.     

Osmoregulatory ability and stress responses during freshwater adaptation of black porgy (Acanthopagrus schlegeli) treated with exogenous prolactin

The effects of ovine prolactin (oPRL) on osmoregulatory ability (electrolyte balance, plasma osmolality and activity of gill chloride cells and gill Na⁺/K⁺‐ATPase) and stress responses (plasma cortisol, glucose, aspartate aminotransferase: AST and alanine aminotransferase: ALT) were investigated in black porgy transferred to freshwater (FW). Fish in seawater (SW) were injected twice at a 24 h interval with oPRL (at 1, 3, or 5 μg g^–1 body weight) or vehicle (0.9% NaCl) and then transferred to FW. They were sampled 3 days after the transfer. With oPRL at 5 μg g^–1, levels of plasma Na⁺ and Cl^? and osmolality were significantly higher than in saline‐treated fish, whereas gill CCs number and Na⁺/K⁺‐ATPase activity were lower. Also, the 5 μg g^–1oPRL treatment led to significantly lower plasma cortisol levels than did saline treatment. However, there were no significant differences in plasma AST and ALT between groups. These results support the positive osmoregulatory role of PRL in black porgy during FW adaptation.