基于实时性优化的内燃机燃烧分析系统研究

采用缸压传感器、数据采集卡、光电编码器和Lab VIEW软件,搭建在线缸压采集和实时燃烧分析系统平台,研究HCCI和RCCI燃烧模式的循环波动特性。针对单循环缸压测量过程中的通道效应干扰,基于频谱分析,采用FFT、线性插值法和IFFT等方法相结合的滤波方式,实现共振峰的在线自适应识别与实时滤波,较好地减少了单循环缸压的干扰误差,使单循环的实时燃烧分析成为可能。随后,基于实时滤波后的缸压曲线,计算得到内燃机的最大压力升高率、燃烧放热率、爆发压力等重要燃烧参数。利用程序算法中同步性良好的生产者/消费者运算模式提高数据的共享能力,实现了数据实时运算与数据快速储存的并行处理,提高了燃烧计算的实时性;针对发动机不同工作阶段采用了不同精度层次的计算方法,减少了进排气、压缩和膨胀阶段的计算耗时,在计算量较大的燃烧放热率计算部分,通过适当简化计算公式和公式节点运算模块来提高燃烧系统的实时性。最后,分析了燃烧分析系统的实时性,并进行了燃烧分析系统的实验验证。     

Proteomic profiles during adventitious rooting of Eucalyptus species relevant to the cellulose industry

New Forests - Adventitious rooting (AR) is an obligatory step for vegetative propagation of commercial woody species. Paper industries have interest in Eucalyptus globulus Labill and its hybrids...     

Revisiting rice breeding methods – evaluating the use of rapid generation advance (RGA) for routine rice breeding

Rice production needs to increase in the future in order to meet increasing demands. The development of new improved and higher yielding varieties more quickly will be needed to meet this demand. However, most rice breeding programmes in the world have not changed in several decades. In this article, we revisit the evidence in favour of using rapid generation advance (RGA) as a routine breeding method. We describe preliminary activities at the International Rice Research Institute (IRRI) to re-establish RGA on a large scale as the main breeding method for irrigated rice breeding. We also describe experiences from the early adoption at the Bangladesh Rice Research Institute. Evaluation of RGA breeding lines at IRRI for yield, flowering time and plant height indicated transgressive segregation for all traits. Some RGA lines were also higher yielding than the check varieties. The cost advantages of using RGA compared to the pedigree method were also empirically determined by performing an economic analysis. This indicated that RGA is several times more cost effective and advantages will be realized after 1 year even if facilities need to be built. Based on our experience, and previous independent research empirically testing the RGA method in rice, we recommend that this method should be implemented for routine rice breeding in order to improve breeding efficiency.     

Embodied Resources in Fish and Shrimp Feeds

Global averages were obtained for amounts of energy, land, water, wildfish, nitrogen, and phosphorus embodied in aquaculture feed ingredients. These data allowed amounts of these embodied resources to be calculated for typical feed formulations for channel catfish, Ictalurus punctatus; hybrid catfish, I. punctatus♀ × I. furcatus♂; Vietnamese catfish, Pangasius spp.; Atlantic salmon, Salmo salar; rainbow trout, Oncorhynchus mykiss; tilapia, Oreochromis spp.; whiteleg shrimp, Litopenaeus vannamei; and black tiger shrimp, Penaeus monodon. Embodied resource use per m.t. of feed varied among species: energy, 4.90–12.48 GJ/m.t.; land, 0.082–0.312 ha/m.t.; water, 502–1227 m³/m.t.; wildfish, 0–2880 kg/m.t.; nitrogen, 3.08–8.63 kg/m.t.; phosphorus, 1.16–5.62 kg/m.t. These calculations did not account for variations in site‐specific factors related to embodied resources and feed composition and use. But they suggest that reducing feed conversion ratio (FCR) by 0.1 unit for the seven species (species groups) could potentially reduce feed use by around 1.1 million tonne (Mt) while conserving 9.8 million GJ of energy, 270,000 ha of agricultural land, 1.4 billion m³ of freshwater, and 1.24 Mt of wildfish. Reduction of the FCR is a powerful means of lessening farm‐level production costs and negative impacts of feed production and use.     

Effects of Feeding Frequency on Apparent Energy and Nutrient Digestibility/Availability of Channel Catfish,Ictalurus punctatus,Reared at Optimal and Suboptimal Temperatures

This study examined the effects of feeding frequency (daily versus every other day [EOD]) on nutrient digestibility/availability of channel catfish, Ictalurus punctatus, reared at optimal (30 C) and suboptimal (24 C) temperatures. A 28% protein practical diet was used as the test diet, and chromic oxide was used at 0.75% of the diet as a maker. Twenty channel catfish of a mean weight of 141 g/fish were stocked into 12 flow‐through aquaria (110 L). Fish were fed daily or EOD to apparent satiation for 7 d before fecal samples were collected by the dissection method. Fish fed EOD to apparent satiation consumed more diet on days fed than those fed daily, and fish reared at 30 C consumed more diet than those reared at 24 C. Neither feeding frequency nor water temperature significantly affected apparent digestibility coefficients for energy and protein and apparent availability coefficients for total amino acids. Results show no advantage by feeding EOD over feeding daily on nutrient digestibility and diet utilization efficiency.     

The efficiency of nitrogen in cattle manures when applied to a double‐annual forage cropping system

The use of cattle manure (CM) for fertilization presents challenges for optimizing nitrogen (N) use. Our work aimed to assess N efficiencies, in a 6‐year experiment with three biennial rotations of four crops: oat–sorghum (first year) and ryegrass–maize (second year) in a rainfed humid Mediterranean area of Spain. Fertilization treatments included the following: control (no N), 250 kg mineral N ha^?1 year^?1 (250MN), three CM rates (supplying 170, 250 and 500 kg N ha^?1 year^?1) and four treatments where the two lowest CM rates were complemented with either 80 or 160 kg mineral N ha^?1 year^?1. Treatments were distributed randomly in each of three blocks. Maximum dry‐matter yield (~44–49 t ha^?1 rotation^?1) was achieved in the third rotation, and only the control and the 170CM yielded significantly less. Within the limitations of the EU Nitrate Directive, the N steady state supply of 170CM always requires a complement of mineral N (80 kg N ha^?1) to maximize N agronomic efficiency. The maximum N‐fertilizer replacement value (250CM vs. 250MN) was 0·67, without significant differences between the two treatments in other N‐related efficiency indexes, which indicates that plants took advantage of residual‐N effects. Nitrogen losses by leaching in the 250CM treatment were around 5–7% of the N applied. This reinforces the sustainability of manure recycling in long cropping seasons.     

Evaluation of mechanical properties of jute/glass/carbon fibers reinforced hybrid composites

A study on the tensile and flexural properties of jute-glass-carbon fibers reinforced epoxy hybrid composites in inter-ply configuration is presented in this paper. Test specimens were manufactured by hand lay-up process and their tensile and flexural properties were obtained. The effects of the hybridization, different fibers content and plies stacking sequence on the mechanical properties of the tested hybrid composites were investigated. Two-parameter Weibull distribution function was used to statistically analyze the experimental results. The failure probability graphs for the tested composites were drawn. These graphs are important tools for helping the designers to understand and choose the suitable material for the required design and development. Results showed that the hybridization process can potentially improve the tensile and flexural properties of jute reinforced composite. The flexural strength decreases when partial laminas from a carbon/epoxy laminate are replaced by glass/epoxy or jute/epoxy laminas. Also, it is realized that incorporating high strength fibers to the outer layers of the composite leads to higher flexural resistance, whilst the order of the layers doesn’t affect the tensile properties.