Median sternotomy closure in dogs: a mechanical comparison of technique stability

OBJECTIVE: To evaluate the mechanical properties of canine median sternotomy closure using double-loop cerclage compared with other commonly used cerclage sternotomy closure patterns. STUDY DESIGN: Experimental study. SAMPLE POPULATION: Forty canine cadaveric sternal segments. METHODS: Median sternotomy-wire constructs were loaded to failure in a materials testing machine. Each construct was radiographed before and after testing. Specific wire configurations tested were: 2 single twist cerclage centered on the sternebrae, single twist figure of 8 pattern centered on the sternal synchondrosis, double twist figure of 8 pattern centered on the sternal synchondrosis, 2 double-loop cerclage centered on the sternebrae, and 1 double-loop cerclage centered on the sternal synchondrosis. Wire configurations were compared by craniocaudal translation of sternabrae on pre-test radiographs, and displacement during loading, and mode of failure, based on analysis of test video, and post-test radiographs. RESULTS: Double-loop cerclage did not provide superior mechanical stabilization of median sternotomy. Both figure of 8 patterns had the least displacement at higher loads. Two single twists that were centered on sternebrae were least able to prevent displacement at higher loads, caused the most craniocaudal translation before testing, and fractured more often at loads < or = 200 N compared with other configurations. CONCLUSION: Sternal wiring techniques stabilizing sternal synchondroses had the least displacement. Overall, figure of 8 cerclage appeared most suitable because they minimized displacement at high loads and facilitated accurate reduction during tensioning. CLINICAL RELEVANCE: In closing canine sternotomy, figure of 8 cerclage may be most suitable. Double-loop cerclage centered on the sternal synchondrosis should be avoided because of wire failure at high loads.     

Mechanical comparison of two knots and two crimp systems for securing nylon line used for extra-articular stabilization of the canine stifle

OBJECTIVE: To compare mechanical properties of knotted and crimped nylon loops. STUDY DESIGN: In vitro mechanical evaluation. SAMPLE POPULATION: Loops of 27 kg-test nylon leader. Single strand-clamped square knot compared with 2 crimp systems. Two strand--self-locking knot compared with 2 crimped loops. METHODS: (a) Single pull to failure (n = 10) at 500 mm/min. Initial loop tension (N), peak load (N), peak elongation (mm), stiffness of the linear portion of the curve (N/mm), and failure mode were recorded. (b) Incremental cyclic loading to failure (n = 5)--each loop was cycled 5 times to 100 N at a loading rate of 200 mm/min. Cycling was repeated, with the load increased by 50 N after each set. Elongation (mm), tension remaining (N), and after permanent deformation was present, elongation at 10 N (mm) were measured. RESULTS: Initial tension and stiffness were greater for crimped loops when compared with knotted loops. There were no differences between crimped loops. The self-locking knot elongated more, and was less stiff, when compared with 2 crimped loops. With incremental loading, knotted loops elongated more than crimped loops. The tension remaining in the loop fell below 10 N more quickly for knotted loops compared with crimped loops. CONCLUSION: Crimped loops are stiffer, and resist both static and cyclic load more effectively before becoming permanently elongated, when compared with knotted loops. CLINICAL RELEVANCE: Stifle stability will be maintained more effectively by crimped nylon loops when compared with knotted loops.     

Surgical correction of severe strabismus and enophthalmos secondary to zygomatic arch fracture in a dog

A grossly displaced segmental zygomatic arch fracture with marked ventro-lateral deviation of the left globe was diagnosed in a 3-month-old male German Shepherd dog following a bite injury. The fracture was approached via a modified lateral orbitotomy and a fragment of the lacrimal bone removed. The rostral portion of the fracture was stabilized with a 5-hole 2.0 dynamic compression plate bone plate. The surgical correction achieved sufficient skeletal fixation for proper anatomical reduction of the globe and excellent cosmetic and functional outcomes.     

RADIOGRAPHIC ANATOMY OF THE CANINE COXOFEMORAL JOINT USING THE DORSAL ACETABULAR RIM (DAR) VIEW

A radiographic study of the anatomy of the canine acetabulum was performed. The relationship between the area of dorsal acetabular rim that is subject to early damage in dogs with coxofemoral joint laxity, and the "DAR point" identified on dorsal acetabular rim (DAR) radiographic views was examined. Radiographs and digital photographs were made of the pelvis harvested from each of six skeletally mature dogs. Through analysis of these images, it was determined that in the standing animal, the DAR point is located 4–6 mm (or approximately 37°) caudal to the dorsal acetabular rim area that is prone to early damage in dogs with coxofemoral joint laxity. This study suggests that the DAR radiographic view may under-represent changes to the dorsal acetabular rim in dogs with coxofemoral laxity.     

Growth rates of phosphate nodules from the continental margin off peru

Modern sea-floor phosphorite nodules sampled from off the coast of Peru are shown to grow at rates of millimeters per thousand years in spite of the fact that the measured accumulation rates of the underlying sediment are two to four orders of magnitude faster. Phosphate nodules grow downward into soft sediment, and the rates of phosphorus accumulation into nodules are approximately equal to the upward diffusive flux of dissolved phosphate inferred from pore water profiles. These results demonstrate that phosphorus in nodules originates from regeneration in sediments rather than as a result of direct precipitation from bottom waters.     

Influence of screw insertion order on compression generated by bone plates in a fracture model

Present recommendations regarding order of screw insertion for compression plate osteosynthesis in veterinary training are variable. We hypothesized that placement of a neutrally positioned screw would reduce the magnitude of compression that could be generated by a subsequently placed compression screw. Canine tibial diaphyseal segments were fixed to a plate attached to a bone surrogate and load cell, and the compression generated by screw tightening was measured. Three different screw insertion order patterns were evaluated using both dynamic compression plate (DCP) and limited contact dynamic compression plate (LC-DCP) implants. In group CN, the first screw was placed in compression mode and the second in neutral mode; in group NC, the first screw was placed in neutral mode and the second in compression mode; in group LNC, the first screw was placed partially tightened in neutral mode and the second in compression mode followed by complete tightening of the neutral screw. Screw insertion order significantly influenced the amount of compression generated with both groups CN and LNC demonstrating significantly greater compression generation when compared with group NC (p <0.0001). Compression generated by group CN constructs was also significantly greater than group LNC (p = 0.0013). Evaluation of group CN data to assess the influence of plate and drill guide combinations on compressive force generated did not demonstrate a statistically significant difference. To maximize compression using a load screw in a bone plate, following securement of the opposite bone fragment to the plate, it should be placed before a neutral screw is placed.     

A serpentinite-hosted ecosystem: the Lost City hydrothermal field

The serpentinite-hosted Lost City hydrothermal field is a remarkable submarine ecosystem in which geological, chemical, and biological processes are intimately interlinked. Reactions between seawater and upper mantle peridotite produce methane- and hydrogen-rich fluids, with temperatures ranging from <40 degrees to 90 degrees C at pH 9 to 11, and carbonate chimneys 30 to 60 meters tall. A low diversity of microorganisms related to methane-cycling Archaea thrive in the warm porous interiors of the edifices. Macrofaunal communities show a degree of species diversity at least as high as that of black smoker vent sites along the Mid-Atlantic Ridge, but they lack the high biomasses of chemosynthetic organisms that are typical of volcanically driven systems.     

Modelling nitrogen fixation of pea ( Pisum sativum L.)

Abstract

Nitrogen fixation was simulated for a leafless variety (Delta) of pea (Pisum sativum L.) in central Sweden. It is assumed that N₂ fixation is basically proportional to root biomass, but limited by high root N or low substrate carbon concentrations. Input data on root carbon and nitrogen were estimated from observations of above-ground biomass and nitrogen. The simulated N₂ fixation was compared with estimated values from observations using the ¹⁵N labelling technique. Test data were taken from pea monocultures and pea-oat mixtures with varying pea biomass levels during 1999. Simulated within-season accumulated N₂ fixation correlated to the estimated N₂ fixation with a correlation coefficient (R ²) of 0.74. For seasonal simulations, the predictability was higher (R ²=0.93). Two alternative non-dynamic models, estimating seasonal N₂ fixation as proportional to above-ground biomass and above-ground N, respectively, gave lower predictability (R ²=0.83 and 0.80, respectively). The models were also applied to a second year (1998) and two other sites by comparison with accumulated N₂ fixation estimated by the Difference method. A halved specific N₂ fixation rate (expressed per unit of root biomass) in 1999, compared with 1998, corresponded to essentially dryer and warmer soil conditions during 1999. It was indicated that the variations in soil moisture were more important than soil temperature. It was concluded that the abiotic responses might be of great importance for modelling N₂ fixation rate under different soil conditions.