Deformation of deep foundation pits due to excavation and dewatering considering the change of void ratio and permeability coefficient with current stress of soil

基于修正剑桥模型理论,推导了孔隙比e随土体当前应力变化的方程,同时比选了4组经典的描述渗透系数k随孔隙比变化的方程,选择了其中一组最佳的估算公式,编写ABAQUS用户子程序VOIDRI和USDFLD,以实现孔隙比和渗透系数随土体当前应力的变化。在此基础上,研究深基坑降水开挖所致的坑内外土体的变形、围护结构的变形及弯矩,得到以下结论：当考虑孔隙比随土体当前应力变化时,坑外地表沉降量、墙体的水平位移、地下连续墙的弯矩、坑底隆起量均大于孔隙比为定值时的情况;当考虑渗透系数随土体当前应力变化时,坑外地表沉降量、墙体的水平位移、地下连续墙的弯矩均小于渗透系数为定值时的情况,但同时考虑渗透系数和孔隙比变化情况时,其对坑底的隆起量的影响可以忽略不计。     

Inspiration to Reuse of Old Industry Building with SOHO

This paper analyzes the SOHO and the reuse of old industry building, and deeply explores the creation and application of SOHO mode in the reuse of old industry building, furthermore, it points out the four inspirations to the reuse of old industry building, at the end, a general judgment of the development logic of SOHO is given.     

Evolvement of Plastic-loop of Fine-sandstone Under the Loading and Unloading Conditions

The deformation characteristics and the plastic-loop of the fine-sandstone is studied under the loading and(unloading) condition at the three different deformation-rates and the two different stress-levels,the results show: 1) There is really the plastic-loop in the deformation curve for the loading deformation curve is different form the unloading deformation curve.But the plastic-loop is nearly unchangeable since the second circulate loading.2) There is different for every imitational parameter between the first deformation curve and the second deformation curve at the different stress-levels and the different deformation-rates,but every imitational parameters become more and more invariable gradually since the second circulate curve.3) With the change of the deformation-rates and stress-levels,the imitational(parameters) will change with it.4) The imitational parameters are different for loading section and unloading section of the fine-sandstone deformation curve at the same circulate curve under the same deformation-rate and stress-level.     

浅谈筒仓的熏蒸方法及对筒仓气密性要求

文章介绍了目前对筒仓采用的几种熏蒸方法。对筒仓气密性对熏蒸效果的影响进行了讨论，并提出了对密封的补救建议。     

A STUDY ON FRACTURE MECHANICS OF BRITTLE MATERIAL WITH PER-CRACKS

In this paper the fracture process of specimen,with single crack, double cracks and triple cracks is observed and analysed. The experimental results show that the fracture process of specimen is different because of the differention of the number, the distance and the type of array of cracks. And the fracture propagation of specimen with triple cracks and double cracks is foundmentally the same.     

小麦轮回选择的初步实践

利用太谷核不育小麦,开展以抗锈和矮秆丰产为主要目标的轮回选择,选择压分别为5.6%和4.7%.抗锈群通过一轮混合选择,条锈病反应型0—1级的抗病株率和严重度25%以下的轻病株率较基础群体分别提高12.5%和5.1%.矮秆丰产群采用两种轮选方案.经两轮选择看出,改良半姐妹法其群体的株高比基础群体明显降低6.2厘米,其余性状有向选择目标集中的趋势;混合选择法其群体除穗粒数外,其余性状进展趋势与上相同.     

水稻与高梁属间远缘杂交花粉管行为观察

水稻和高粱是禾本科的两个异属作物,因其遗传距离较远,杂交表现不亲和,结实率极低,难以获得种子.为初步了解水稻与高粱属间远缘杂交花粉管行为,探索该远缘杂交的发生过程,本实验以籼稻珍汕97A×珍汕97B和Ⅱ-32A×Ⅱ-32B两个组合为对照,对珍汕97A×晋江多枝高粱和Ⅱ-32A×晋江多枝高粱两个属间远缘杂交组合的花粉管行为作初步的观察与研究,结果表明晋江多枝高粱花粉粒能象水稻花粉粒一样在水稻柱头上正常萌发,花粉管在花柱及子房中生长与伸长,有些能最终到达子房的基部;同时高梁花粉管生长也出现诸如不能进入花柱、胼胝质不规则堆积、花粉管末端钝化等一系列的异常表现,致使不少花粉管停滞生长.