葡萄VvSUC12基因启动子的克隆及上游调控因子鉴定

枝干病害葡萄溃疡病近年来严重限制了葡萄产业发展。研究表明葡萄蔗糖转运蛋白参与寄主植物和病原菌的互作过程。为解析蔗糖转运蛋白VvSUC12在葡萄免疫反应过程中的功能,本研究克隆了VvSUC12基因翻译起始位点上游1 500 bp的启动子区,通过生物信息学分析发现该区域包含4个Dof转录因子结合序列(A/TAAAG)及多种激素调节与防御相关的顺式元件。实时荧光定量分析显示,接种可可毛色二孢菌显著诱导VvSUC12和VvDof19基因的表达。通过酵母单杂交实验筛选得到与VvSUC12启动子互作的转录因子VvDof19。酵母双杂交实验证实VvDof19具有自激活活性;进一步通过烟草瞬时表达发现Dof19-GFP的相对GUS活性约为对照GFP的9倍,表明转录因子VvDof19能够激活VvSUC12基因的表达。研究结果为深入研究蔗糖转运蛋白在葡萄免疫反应中的功能奠定基础。     

农牧交错带灌溉和旱作模式下马铃薯耗水差异

为揭示北方农牧交错带地区马铃薯“水改旱”种植对其产量和水分利用的影响,选取中国北方农牧交错带地区27个站点,基于站点的气象数据、土壤数据和管理数据驱动充分验证的APSIM-Potato模型,模拟分析农牧交错带地区灌溉和雨养马铃薯的耗水差异。结果表明：北方农牧交错带地区马铃薯种植连续灌溉10、20 a和30 a的产量分别为15 900～35 600、16 400～34 800 kg·hm^-2和16 600～34 800 kg·hm^-2,改为旱作后对应的产量分别为12 800～30 600、13 900～29 100 kg·hm^-2和12 700～25 500 kg·hm^-2;灌溉马铃薯产量均表现为西部较高,旱作马铃薯产量则为东部较高。连续灌溉10、20 a和30 a的播前1 m土层土壤含水量分别为163～388、161～394 mm和154～398 mm,改为旱作后分别下降31.8%、35.3%和36.9%。连续灌溉10、20 a和30 a后的地下水消耗量分别为5 360～21 330、8 910～4...     

野生老芒麦种质资源鉴定与基部叶鞘绒毛变异分析

为更好地利用老芒麦(Elymus sibiricus L.)野生资源,本研究从我国青藏高原、西北、华北、东北地区以及国外部分地区共采集了1 723份野生披碱草属种质资源,通过表型特征观测和流式细胞仪检测,共鉴定出了990份野生老芒麦种质,246份垂穗披碱草种质,并测得老芒麦的DNA含量在5.86～7.30 Gb之间,平均DNA含量为6.66 Gb;垂穗披碱草材料的DNA含量在9.50～10.36 Gb之间,平均DNA含量为9.97 Gb。研究结果显示,在西北、华北以及东北地区的部分野生老芒麦材料在苗期基部叶鞘出现了绒毛,分析发现该表型出现的概率与经度和纬度呈极显著正相关关系(P<0.01),与海拔、年年均气温以及年平均降雨量呈极显著负相关关系(P<0.01)。表明老芒麦苗期基部叶鞘绒毛的有无与环境因子之间存在着必然的联系,可能是老芒麦种质应对不同环境类型的适应性机制之一。本研究为老芒麦的形态鉴定提供了新的依据,为老芒麦种质资源挖掘和育种应用提供了材料基础。     

短花针茅荒漠草原物种间关系的多度不对称性对载畜率的响应

目前物种的相对多度与种间关系的内部联系如何影响物种共存仍不清楚。为探讨植物群落物种间关系强度的多度不对称性及其对载畜率的响应,本研究以内蒙古短花针茅(Stipa breviflora)荒漠草原植物群落为对象,分析了对照、轻度、中度及重度放牧下群落物种的多度及其频率。结果表明：随载畜率的增大,物种数呈现出降低的趋势。不同载畜率下同分布指数CO均存在明显的多度依赖性;常见种(如短花针茅、无芒隐子草(Cleistogenes songorica)及刺穗藜(Chenopodum aristatum))对其他物种的作用强度普遍较强。不同载畜率下短花针茅对无芒隐子草及刺穗藜的作用强度均高于其二者对短花针茅的强度,表现出种间强度的不对称性。此外,放牧使得短花针茅对无芒隐子草的作用强度呈现出增大的趋势,使得无芒隐子草对短花针茅的作用强度呈现出降低的趋势。因此,物种间存在多度的不对称性,而放牧进一步造成其物种间作用强度的变化。     

Application of Multi-vertical-line-element Model of RC Walls and Discussion on IT

The inelastic dynamic response analysis program for frame-shear wall structures developed by the authors is introduced firstly, in which the multi-vertical-line-element model was adopted for shear walls and the refined single-component model was used for beams and columns in frame.By analyzing three-story structural models tested in shaking-table in a famous foreign research institute, the validity of the modeling of shear wall in the program was verified. The analytical results indicate that the inelastic dynamic responseof shear walls under random ground motion input can be predicted effectively withthe program. Finally, with the preliminary discussion of some key points in modeling of shear wall, some suggestions areput forward for further improving and refining the multi-vertical-line-element model.     

Sintering of Magnetite Concentrates Without Carbon

With the goal of the sintering of magnetite concentrates without carbon,the effect of quality,inert atmosphere and Fe_3O_4 addition on microwave sintering of magnetite concentrates is studied.It is shown that: With the same basicity(CaO/SiO_2=2.5) and microwave heating condition(1000W,2.45GHz,20min),the centre temperature decreaseds with a increasing sample mass;There is no great difference between with and without inert atmosphere in microwave sintering of magnetite in a same microwave heating condition.When 100g sample(CaO/SiO_2=2.5) is heated by microwave irradiation(1000W,2.45GHz,20min),the more Fe_3O_4 is added,the less liquid phase is produced,which is bad for microwave sintering of magnetite concentrate.     

Analysis on Micro-structure of TiN Thin Film and Polyimide with AFM

The study in molecular morphology is given with a highresolution Atomic Force Microscope AFM.IPC-208B.By taking TiN thim film prepared by magnerton sputtering method and polymide(PI) fibre for examples,the preferenthal growing plme of TiN thin film,the atomic arranges of TiN thin film on the preferential growing plme and the surficial micro-structure can be ascertained form the three-dimensional images obtamed by AFM.IPC-208B.These experiments not only identify small structures of the materials,but also affirm that AFM.IPC-208B holds the precision of atomic level and potential application in micro-structure field,at the same time it establishs the groundwork for the application in micro-process kingdom.     

A Comparative Study of Confined Concrete Models under Cyclic Loading

In this paper,four models are selected as the representatives and applied to nonlinear dynamic analysis program for space frames which is based on the beam-column elements using the finite element flexibility method and the fiber model.Park's test on combined axial and bending columns under cyclic loading are taken as the calibrations,comparisons to material and structural member level are drawn and the analytical results of various models are discussed.     

Optimum Planting System for Energy Saving and Healthy Demanded

It is proved that planting is effective to improve environment both indoor and outdoor resulted from the functions of plants to clean air and save energy. So the contradiction between saving energy and comfort,healthy demanded by people can be solved by planting. The planting have being emphasized and expanded during recent years,but in the planting plan,just the function of beautifying the environment is concerned and the function of ecological and saving energy are neglected. The analysis on the ooptimum system of planting is to make the planting system as an organic composition in the effectiveness structure and space layout of the city. Based on the study on equivalent relation of different effects on environment, the optimum system of planting structure will be determined in order to achieve the integrated effects of planting on environment.