Parsimoniously modelling perennial vegetation suitability and identifying priority areas to support China's re-vegetation program in the Loess Plateau: Matching model complexity to data availability

The Chinese Central government's policy to re-vegetate large areas of the Loess Plateau is currently being rapidly implemented at the provincial, prefecture, county, township, and village levels of government. Managers at these five levels of government need access to information to assist them to plan the land use change prior to performing on-ground activities. To this end, the suitability of 38 predominately native species in the 113,000 km² Coarse Sandy Hilly Catchments (CSHC) has been mapped at a 100 m resolution. In this data-sparse region, this was achieved by using a five-variable spatial overlay approach as we were able to readily access the required environmental variables and rule-set defining the species’ requirements (or tolerances). As the rules did not consider optimal growth they were possibly ‘too inclusive’, so the spatial extent of areas suggested for re-planting was refined by defining ‘target areas’ for trees, shrubs and grasses based on precipitation, aspect, landform, and slope. In the land-use planning criteria developed here we suggest that hill-slopes and gullies with slopes greater than or equal to 15° (defined from a 100 m resolution DEM) be left for natural succession. Due to lateral flow of water, sediment and nutrients from these steep slope and gullies, further prioritising re-vegetation target areas to the zone adjacent to and down slope from these steep portions of the landscape reduces sediment entering the river network with a minimal decrease of regional stream flow. These two functions (mapping species suitability and locating where priority and target re-vegetation activities should be undertaken) are available at a 100 m resolution for the entire CSHC by accessing a bilingual decision support tool called ReVegIH (Re-Vegetation Impacts on Hydrology). Finally, an ecohydrological model was used to simulate changes in average annual stream flow originating from the CSHC based on implementing the ‘target’ and ‘priority’ area re-vegetation activities within the constraints of two land limits.     

Predicting percentage of intramuscular fat using two types of real-time ultrasound equipment

In the present study, 500 steers were used to develop models for predicting the percentage of intramuscular fat (PIMF) in live beef cattle. Before slaughter, steers were scanned across the 11th and 13th ribs using Aloka 500V (AL-500) and Classic Scanner 200 (CS-200) machines. Four to five images were collected per individual steer using each machine. After slaughter, a cross-sectional slice of the longissimus muscle from the 12th rib facing was used for chemical extraction to determine actual carcass percentage of intramuscular fat (CPIMF). Texture analysis software was used by two interpreters to select a region for determination of image parameters, which included Fourier, gradient, histogram, and co-occurrence parameters. Four prediction models were developed separately for each of AL-500 and CS-200 based on images captured by the respective machines. These included models developed without transformation of CPIMF (Model I), models based on logarithmic transformation of CPIMF (Model II), ridge regression procedure (Model III), and principal component regression procedure (Model IV). Model R2 and root mean square error of AL-500 Models I, II, III, and IV were 0.72, 0.84%; 0.72, 0.85%; 0.69, 0.91%; and 0.71, 0.86%; respectively. The corresponding R2 and root mean square error values of CS-200 Models I, II, III, and IV were 0.68, 0.87%; 0.70, 0.85%; 0.64, 0.94%; and 0.65, 0.91%; respectively. Initially, AL-500 and CS-200 prediction models were validated separately on an independent data set from 71 feedlot steers. The overall mean bias, standard error of prediction, and rank correlation coefficient across the four AL-500 models were 0.42%, 0.84%, and 0.88, respectively. For the four CS-200 models, the corresponding overall mean values were 0.67%, 0.81%, and 0.91, respectively. In a second validation test, only Model II of AL-500 and CS-200 was evaluated separately based on data from 24 feedlot steers. The overall mean bias, absolute difference, and standard error of prediction of AL-500 Model II were 0.71, 0.92, and 0.98%. For CS-200 Model II, the corresponding values were 0.59, 0.97, and 1.03%. Both AL-500 and CS-200 equipment can be used to accurately predict PIMF in live cattle. Further improvement in the accuracy of prediction equations could be achieved through increasing the development data set and the variation in PIMF of cattle used.     

The role of altered uterine-embryo synchrony on conceptus growth in the pig

This study was conducted to determine whether inducing an embryo-uterine asynchrony during the preimplantation period would alter fetal and(or) placental size at term. Yorkshire gilts (n = 24) were checked twice daily for estrus and bred to a Yorkshire boar 24 h after the first exhibition of estrus. Embryos (1 to 4 cells) were flushed from the oviducts of each donor gilt on d 2.5 of gestation and transferred in equal numbers to the oviducts of a recipient gilt on d 1.5, 2.5, or 3.5 of the estrous cycle. Gilts were slaughtered on d 112 of gestation (calculated on the age of the conceptus) and fetal and placental weight, placental surface area, and implantation site lengths were determined. Although litter sizes were similar (9.1+/-0.9), conceptuses transferred to d 3.5 recipients became heavier fetuses (1.44+/-0.05 vs 1.23+/-0.04 kg, P < 0.001), with larger placental surface areas (1,793+/-60 vs 1,459+/-43 cm2, P < 0.01), and longer implantation sites (32.1+/-1.5 vs 24.9+/-0.6 cm, P < 0.001) than those transferred to recipients on d 2.5. These data demonstrate that oviductal transfer of embryos into a reproductive tract that is more advanced by as little as 24 h can result in alterations in placental growth and function during gestation.     

Disease and mortality on red deer farms in New Zealand

A longitudinal observational study of 15 red deer farms was carried out in New Zealand for two years from March 1992. The deer were monitored for performance and health problems, and farm management practices were recorded. Numbers at risk were 4,683 hind-years, 2,459 stag-years and 3,202 weaner-years. The numbers of primiparous and adult hinds at risk of losing their progeny by weaning were 653 and 3,364, respectively. Where possible, postmortem examinations were carried out, and organs were sampled for histological and microbiological investigation. Rates of mortality varied with season with most stag and hind deaths in winter and weaner deaths in autumn and winter. Overall mortality rates were 1.77, 2.60 and 5.87 per 100 deer-years for hinds, stags and weaners, respectively. Malignant catarrhal fever accounted for 0.53 stag and 0.17 hind deaths per 100 deer-years at risk Misadventure, including broken bones, accounted for 15.4 per cent of weaner mortalities, or 0.53 weaner mortalities per 100 weaner-three months in autumn. Yersiniosis was confirmed in 18.6 per cent of weaner deaths, or 1.09 weaners per 100 weaner-years during the first six months after weaning, but was also suspected but unconfirmed in a further 41 per cent of weaner mortalities. Overall, 17 per cent of yearling hinds, and 9.2 per cent of adult hinds lost their progeny between pregnancy diagnosis in June and weaning in March. One outbreak of osteochondrosis was recorded. Mortality rates varied between farms and many mortalities were preventable.     

A review of tissue reference values used to assess the trace element status of farmed red deer (Cervus elaphus)

AIMS: This paper reviews the principles for the establishment of biochemical reference criteria for assessing the trace element status of farmed livestock and summarises data for copper, selenium, vitamin B12 and iodine for farmed red deer. COPPER: Enzootic ataxia and osteochondrosis occur when liver copper concentrations are below 60 micromol/kg fresh tissue, and serum copper concentrations are below 3-4 micromol/l. Growth responses to copper supplementation have been equivocal when blood copper concentrations were 3-4 micromol/l, but were significant when mean blood copper concentrations were 0.9-4.0 micromol/l. No antler growth or bodyweight response to copper supplementation was observed when blood ferroxidase levels averaged 10-23 IU/l (equivalent to serum copper concentrations of 6-13 micromol/l) and liver copper concentrations averaged 98 mumol/kg fresh tissue. These data suggest that 'deficient', 'marginal' and 'adequate' ranges for serum copper concentrations should be 5, 5-8, and 8 micromol/l, respectively, and those for liver copper concentrations should be 60, 60-100, and 100 micromol/kg, respectively. SELENIUM: White muscle disease has been reported in young deer with blood and liver selenium concentrations of 84-140 nmol/l and 240-500 nmol/kg fresh tissue, respectively. No growth-rate response to selenium supplementation occurred in rising 1-year-old deer when blood selenium concentrations were less than 130 nmol/l, the range in which a growth-rate response would be expected in sheep. VITAMIN B12: Vitamin B12 concentrations in deer are frequently below 185 pmol/l without clinical or subclinical effects. No growth response was observed in young deer with vitamin B12 concentrations as low as 75-83 pmol/l. A growth response to cobalt/vitamin B12 supplementation occurs in lambs with serum vitamin B12 concentrations 336 pmol/l. CONCLUSIONS: Data that can be used to establish reference ranges for assessing trace element status in deer are limited. More robust reference values for farmed red deer need to be established through further studies relating biochemical data to health and performance.     

A novel nutritional strategy to prevent milk fever and stimulate milk production in dairy cows

AIMS: To assess the efficacy of a feed supplement designed to reduce the dietary availability of calcium when fed during the last 2-3 weeks of pregnancy, on the incidence of postparturient hypocalcaemia (milk fever) and on milksolids (MS) production in pasture-fed dairy cows in early lactation. METHODS: In Experiment 1, late-pregnant Holstein/Friesian cows, 4-10 years old, grazing pasture, were either fed the supplement (1 kg/cow/day) for 2-4 weeks prior to calving (n=11) or no supplement (n=10). Plasma calcium concentrations were measured immediately before and after a 20 h fast intended to induce hypocalcaemia at the end of this period, 1-7 days before the cows calved. In Experiment 2, mixed-breed dairy cows, 3-10 years old in 7 commercial dairy herds were fed the same supplement (1 kg/cow/day) for 1-3 weeks immediately prior to calving (n=565) or no supplement (n=614), and incidences of clinical milk fever and MS production at 6-9 weeks post calving were compared between groups. RESULTS: In Experiment 1, plasma calcium concentrations were higher (p=0.01) in supplemented than in non-supplemented cows after fasting, indicating reduced susceptibility to fasting-induced hypocalcaemia. In Experiment 2, the incidence of milk fever was lower (6.4% vs 17.1%, p=0.001) and MS production was higher (p=0.01) in supplemented than in non-supplemented cows. CONCLUSIONS: These preliminary results demonstrate that feeding a supplement designed to reduce dietary calcium availability for 2-4 weeks immediately prior to calving reduced the susceptibility of cows to fasting-induced hypocalcaemia, reduced the incidence of clinical milk fever and increased MS production in early lactation. CLINICAL RELEVANCE: The concept and product reported here have potential to provide dairy farmers with a practical means to prevent hypocalcaemia and improve milk production during early lactation.     

Laparoscopic ovariectomy using sequential electrocoagulation and sharp transection of the equine mesovarium

OBJECTIVE: To describe in horses and ponies a laparoscopic ovariectomy technique facilitated by electrosurgical instrumentation. STUDY DESIGN: Elective ovariectomy was performed in 23 mares using laparoscopic electrosurgical instrumentation. ANIMALS OR SAMPLE POPULATION: Twenty-three mares (13 horses, 10 ponies), aged from 2 to 21 years and weighing 90 to 545 kg. METHODS: Food was withheld for a minimum of 12 hours. Mares were sedated with detomidine hydrochloride (0.02 to 0.03 mg/kg) or xylazine hydrochloride (0.5 to 1.0 mg/kg). Excluding the pony mares, all other mares were restrained in stocks. Portal sites in the paralumbar fossa region were desensitized with 2% mepivacaine. Abdominal insufflation was achieved through a teat cannula positioned in the ventral abdomen or a Verres-type needle placed through the paralumbar fossa. After trocar and laparoscope insertion, the ipsilateral ovary and mesovarium were identified, and the mesovarium, tubal membrane, and proper ligament were infiltrated with 2% mepivacaine. The mesovarium was coagulated using bipolar or monopolar electrosurgical forceps and transected sequentially from cranial to caudal until the ovary was completely freed and then removed. The contralateral ovary was removed in a similar fashion through the opposite paralumbar fossa. RESULTS: Bipolar and monopolar electrosurgical forceps were easy to use and provided adequate coagulation of vessels within the mesovarium. Two mares were euthanatized after the procedure for unrelated reasons. One mare had mild signs of colic 24 hours after ovariectomy. In 1 pony mare, the incision used to remove one ovary dehisced on the 5th postoperative day and was allowed to heal by second-intention. No long-term complications had occurred in 11 horses and 10 ponies, 6 to 24 months after surgery. CONCLUSION: Laparoscopic ovariectomy and hemostasis of the mesovarium can be easily accomplished using electrosurgical instrumentation. CLINICAL RELEVANCE: Standing laparoscopic ovariectomy, using electrosurgical instrumentation, is an effective and safe technique to provide hemostasis of the mesovarium in mares.     

Arthrodesis of the equine proximal interphalangeal joint: a biomechanical comparison of three 4.5-mm and two 5.5-mm cortical screws

OBJECTIVE--To compare the biomechanical characteristics and mode of failure of 2 parallel-screw techniques for proximal interphalangeal joint arthrodesis in horses. STUDY DESIGN--Randomized block design, blocking for horse (1-5), method of screw fixation (three 4.5-mm vs two 5.5-mm), side (left limb vs right limb), and end (front limb vs hind limb). Constructs were loaded to failure in 3-point bending in a dorsal-to-palmar (plantar) direction. SAMPLE POPULATION--Twenty limbs (10 limb pairs) from 5 equine cadavers. METHODS--A combined aiming device was used to facilitate consistent screw placement. Three parallel 4.5-mm cortical screws were placed in lag fashion in 1 limb of a pair, and 2 parallel 5.5-mm cortical screws were placed in lag fashion in the contralateral limb. Arthrodesis constructs were tested in 3-point bending in a dorsal-to-palmar (plantar) direction using a materials-testing machine. Loading rate was 19 mm/s. Maximal bending moment at failure and composite stiffness were obtained from bending moment-angular deformation curves. Data were analyzed using ANOVA and chi(2) analysis. RESULTS--There were no significant differences in bending moment (P >.05, power = 0.8 @ delta = 19%) or composite stiffness (P >.05, power = 0.8 @ delta = 19%) between the 2 fixation techniques. Higher maximal bending moment was found in front limbs than hind limbs, and front limbs with two 5.5-mm screws than hind limbs with two 5.5-mm screws. In all cases, constructs completely failed. A greater number of 4.5-mm cortical screws failed than 5.5-mm cortical screws. CONCLUSIONS-In pastern arthrodesis constructs loaded in 3-point bending, end (front limb vs hind limb) affected maximal bending moment at failure of constructs. There was no significant effect of horse, treatment, or side on maximal bending moment or stiffness. Two 5.5-mm cortical screws should provide a surgically simpler pastern arthrodesis than three 4.5-mm cortical screws while maintaining similar biomechanical characteristics. CLINICAL RELEVANCE--Three 4.5-mm screws or two 5.5-mm screws will provide similar biomechanical characteristics in bending when performing equine pastern arthrodesis.