Infertility associated with the absence of endometrial progesterone receptors in a bitch

A three‐year‐old intact female Old English sheepdog was presented for evaluation of infertility. A uterine biopsy was performed during dioestrus, and the microscopic appearance was inconsistent with progesterone stimulation; the glands were sparse, simple and failed to show coiling, while the glandular epithelium was cuboidal instead of columnar. There was very little evidence of glandular activity. Due to the inappropriate appearance of the glands for the stage of the cycle, immunohistochemistry for progesterone receptors was performed. No progesterone receptor‐positive immunoreactivity was identified in the endometrial luminal epithelium, glandular epithelium or stroma. Weak intranuclear immunoreactivity was identified within the smooth muscle cells of the myometrium. The absence of progesterone receptors within the endometrial glands is the most likely explanation for the abnormal appearance of the endometrium and for this bitch's infertility. To our knowledge, this is the first report of endometrial progesterone receptor absence in a bitch.     

Organic carbon fluxes and ecological recovery from the cretaceous-tertiary mass extinction

Differences between the carbon isotopic values of carbonates secreted by planktic and benthic organisms did not recover to stable preextinction levels for more than 3 million years after the Cretaceous-Tertiary mass extinction. These decreased differences may have resulted from a smaller proportion of marine biological production sinking to deep water in the postextinction ocean. Under this hypothesis, marine production may have recovered shortly after the mass extinction, but the structure of the open-ocean ecosystem did not fully recover for more than 3 million years.     

Photonic band gap guidance in optical fibers

A fundamentally different type of optical waveguide structure is demonstrated, in which light is confined to the vicinity of a low-index region by a two-dimensional photonic band gap crystal. The waveguide consists of an extra air hole in an otherwise regular honeycomb pattern of holes running down the length of a fine silica glass fiber. Optical fibers based on this waveguide mechanism support guided modes with extraordinary properties.     

Room temperature-operating spin-valve transistors formed by vacuum bonding

Functional integration between semiconductors and ferromagnets was demonstrated with the spin-valve transistor. A ferromagnetic multilayer was sandwiched between two device-quality silicon substrates by means of vacuum bonding. The emitter Schottky barrier injected hot electrons into the spin-valve base. The collector Schottky barrier accepts only ballistic electrons, which makes the collector current very sensitive to magnetic fields. Room temperature operation was accomplished by preparing Si-Pt-Co-Cu-Co-Si devices. The vacuum bonding technique allows the realization of many ideas for vertical transport devices and forms a permanent link that is useful in demanding adhesion applications.     

Modular hybrid total hip arthroplasty. Experimental study in dogs

Background

This prospective experimental study evaluated the surgical procedure and results of modular hybrid total hip arthroplasty in dogs.

Methods

Ten skeletally mature healthy mongrel dogs with weights varying between 19 and 27 kg were used. Cemented modular femoral stems and uncemented porous-coated acetabular cups were employed. Clinical and radiographic evaluations were performed before surgery and at 30, 60, 90, 120, 180 and 360 days post-operation.

Results

Excellent weight bearing was noticed in the operated limb in seven dogs. Dislocation followed by loosening of the prosthesis was noticed in two dogs, which were therefore properly treated with a femoral head osteotomy. Femoral fracture occurred in one dog, which was promptly treated with full implant removal and femoral osteosynthesis.

Conclusions

The canine modular hybrid total hip arthroplasty provided excellent functionality of the operated limb.     

A finite element model of the bovine claw under static load for evaluation of different flooring conditions

AIM: To create a computer-based finite element (FE) model of the bovine claw and to use finite element analysis (FEA) to estimate stress and deformation of a physiologically-shaped model claw under static load, to visualise potential material weakness and to evaluate the effect of different flooring conditions.

METHODS: Model geometry was derived using digitalised images from a recently trimmed, sound, hind claw from a 4-year-old Austrian Fleckvieh cow. Material properties of bovine claw horn were defined from preliminary investigations and recently established material data, using a modulus of elasticity from 200 to 600 N/mm² . Meshing of the model was performed with 42,127 elements based on 116,141 nodes. Loading of the model was defined at 756 N per claw on a hard and soft surface.

RESULTS: The FE model of the bovine claw under a load of 756 N showed only minimal deformation, most of which took place at the axial wall. Highest stresses were evident in the proximal axial wall, the outer edge of the weight-bearing surface and under the heels. The claw-floor contact image showed a pressure distribution resembling the distal rim of the claw wall. On the hard surface, the maximum stresses were three times higher than those on the soft surface.

CONCLUSIONS AND CLINICAL RELEVANCE: FEA allowed visualisation of the effects that loading on different floor surfaces have on the biomechanics of the claw. Uneven preparation of the claw sole resulted in high stresses at and close to irregularities of the sole. Consequences were more severe on harder flooring. The model supports the hypothesis that mechanical factors play a substantial role in the pathogenesis of claw lesions.     

Influence of preservation methods on the quality of colostrum sourced from New Zealand dairy farms

Abstract

AIMS: To assess the effect of two temperatures (ambient temperature and 4°C), three preservation methods (no preservative, yoghurt and potassium sorbate), and two periods of storage (3 and 7 days) on Brix and total bacterial and coliform counts of colostrum collected from New Zealand dairy farms.

METHODS: One litre of colostrum destined to be fed to newborn calves was collected from 55 New Zealand dairy farms in the spring of 2015. Six aliquots of 150 mL were obtained from each colostrum sample, with two aliquots left untreated, two treated with potassium sorbate and two with yoghurt, and one of each pair of aliquots stored at ambient temperature and the other at 4°C. All samples were tested for Brix, total bacterial counts and coliform counts before treatment (Day 0), and after 3 and 7 days of storage. The effect of preservation method and storage temperature on the change in Brix, bacterial and coliform counts after 3 or 7 days of storage was analysed using multivariable random effects models.

RESULTS: For all outcome variables there was a temperature by preservation interaction. For aliquots preserved with potassium sorbate, changes in Brix and bacterial counts did not differ between aliquots stored at ambient temperature or 4°C, but for aliquots preserved with yoghurt or no preservative the decrease in Brix and increase in bacterial counts was greater for aliquots stored at ambient temperature than 4°C (p<0.001). For aliquots preserved with potassium sorbate, coliform counts decreased at both temperatures, but for aliquots preserved with yoghurt or no preservative coliform counts increased for aliquots stored at 4°C, but generally decreased at ambient temperatures (p<0.001). There was also an interaction between duration of storage and temperature for bacterial counts (p<0.001). The difference in the increase in bacterial counts between aliquots stored at 4°C and ambient temperature after 3 days was greater than between aliquots stored at 4°C and ambient temperature after 7 days.

CONCLUSIONS AND CLINICAL RELEVANCE: Use of potassium sorbate to preserve colostrum for 3 or 7 days resulted in little or no reduction in Brix and a lower increase in total bacterial counts than colostrum stored without preservative or with yoghurt added. Colostrum quality was not affected by storage temperature for samples preserved with potassium sorbate, but storage at 4°C resulted in better quality colostrum than storage at ambient temperatures for colostrum with no preservative or yoghurt added.