Contribution of technic materials to the mobile fraction of metals in urban soils in Marrakech (Morocco)

Background, Aim and Scope  In urban areas, soils are often dramatically altered by anthropogenic activity and these modifications distinguish these soils (Anthrosols, Technosols) from those in natural systems. In urban environments, they receive considerable pollution from industry, traffic and refuse. Since contaminated soil particles can be easily inhaled or ingested, there is a potential transfer of toxic pollutants to humans. Risk assessment is essentially based on the determination of the total or mobile contents of pollutants in soils using chemical extractions. This approach could be improved by taking into consideration the bioavailable fractions of these toxic elements as measured by biotests. The coarse soil fraction usually neglected in analyses can nevertheless have an effect on the concentration of metals in the soil solution. This coarse fraction is made up of the natural materials and of technic materials constituting anthropogenic soils (plastic, paper, fabric, wood, bones, metallic elements and building materials). These materials have variable capacities to release or adsorb trace elements. Samples representative of different technic fraction components of Marrakech urban soils permit one to quantify their contribution to the enrichment of the soluble metal concentrations. Works are carried out to achieve partial extractions of metals from the three fractions (less than 2 mm, coarse natural and coarse technic) of selected urban soils in order to determine their contribution to the metal contamination of soils. Materials and Methods  Selected soils were collected from 9 sites according to a gradient of increasing anthropogenic influence from suburban to urban zones. Soils were air-dried, homogenized, and sieved (2 mm). The coarse fraction was sorted to separate the different technic materials and natural materials. Water extractions were run, on the natural, coarse fraction, on the complete technic fraction of the 9 soils and on average samples made of technic materials sorted out of 58 topsoils sampled from different sites in the city of Marrakech. Results  Results show that the percentage of the technic fraction increases while approaching the historic city center. It represented about 14% in the most anthropogenically disturbed soils. Along this gradient, soils changed progressively from Anthrosols to Technosols according to the WRB classification of urban and industrial soils. Analyses of metal contents showed that the fine fraction (<2 mm) mainly contributed to the metallic contamination of the water soluble fraction. The natural coarse fraction had the highest contribution to the copper release and was responsible for the release of all water-extractable copper in some soils. Concerning the technic fraction, it has a significant contribution essentially in the most anthropogenically disturbed soils as characterized by an elevated percentage of anthropogenic elements. The water extractable metal contents of average samples of these anthropogenic elements shows that elevated metal concentrations were released by bones, wood, plastic and fabric/paper. Discussion  This study concerns soils in urban areas, which are strongly impacted by human activities. Part of the soils can be classified as Anthrosols, profoundly impacted through the addition of organic materials from household wastes, irrigation, or cultivation. Other soils strongly impacted by human activities are Technosols dominated or strongly influenced by man-made materials. Technosols appear mostly in urban and industrial areas and are more likely to be contaminated than Anthrosols. The composition and heterogeneity of urban soils lead to modifications of the mobility and availability of pollutants depending on successive land-uses and on the composition of technic materials. The fine fraction offers a high transferring surface capacity, leading to a high mobilization of metals. The technic fraction contributes significantly to the metal release in the Technosols. This property can be explained by a reversible adsorption of metals on the organic matter. Conclusions  Results confirm that anthropogenic activity causes a wide spatial diversity of soil quality in the urban and suburban area. It introduces large amounts of technic materials in soils that could have an impact on the metal availability. It therefore acts on the metal bioavailability in the urban Technosols. Recommendations and Perspectives  These results show that it is necessary, in addition to the characterization of the fine particles, to take into account the contribution of the coarse fraction of the Technosols in the evaluation of risks of transfer of metals to the food chain.     

Organic geochemical parameters for estimation of petrogenic inputs in the coastal area of Kavala City,Greece

Background, aims, and scope  Sediments and soils in coastal areas are frequently polluted by anthropogenic contaminants as the result of both riverine or terrestrial discharge and autochthonic marine emissions. In order to determine petrogenic contamination in the coastal industrial area of Kavala City in northern Greece, a combination of polycyclic aromatic hydrocarbon (PAH) and organic geochemical petroleum biomarker analyses has been performed on marine and freshwater sediments as well as soils. Materials and methods  Soils, freshwater, and marine sediments have been treated by standard extraction methods. The dried and desulphurized sample extracts have been fractionated by column chromatography, followed by addition of surrogate standards. Qualitative and quantitative data were obtained by gas chromatograph connected with a flame ionization and electron capture detector (GC-FID/ECD) and by GC linked to a mass spectrometer (GC/MS), whereas identification of compounds was based on EI⁺-mass spectra and gas chromatographic retention times. Quantitative data were obtained by integration of specific ion chromatograms. Results  The total PAH concentrations measured in the area varied highly, showing different levels from 18 up to 318,000 ng g⁻¹ dry weight (dw). Several PAH ratios, as well as the ratio of pristane (Pr) to phytane (Phyt), have been considered. Out of 39 samples, 22 revealed a specific distribution of hopane fingerprints indicating petrogenic input. Finally, in numerous samples, the ratio of 17α(H)-22,29,30-trisnorhopane (Tm) and 18α(H)-22,29,30-trisnorhopane (Ts) was calculated, as well as the ratio of 22S-17α(H),21β(H)-30 homohopane (αβC₃₁-hopane 22S) and 22R-17α(H),21β(H)-30 homohopane (αβC₃₁-hopane 22R). Discussion  Based on the specific PAH ratios, a group of samples was clearly characterized to be contaminated dominantly by combustion-derived emissions, whereas a second group of samples exhibited mixed influence from petrogenic and pyrogenic PAHs. On the other hand, the exhibition of specific hopane fingerprints in many samples indicates a direct petrogenic input. Finally, the values of the ratio of Tm/(Ts + Tm) and of αβC₃₁-hopanes 22S/(22S+22R)-isomer demonstrated an input of highly mature organic matter that has to be clearly attributed to petroleum-derived contamination, while the ratio of Pr/Phyt showed that most samples exhibited an input of organic matter. Conclusions  The coastal area of Kavala is strongly affected by anthropogenic contaminants. Petrogenic emissions were pointed out firstly by PAH analyses that separated dominantly pyrogenic contaminated sites from areas affected by both pyrogenic and petrogenic emissions. However, analyses of organic geochemical biomarkers revealed a much higher sensitivity in identifying petroleum-derived contaminations and were successfully used to differentiate several petrogenic contaminations in the marine and terrestrial samples. Recommendations and perspectives  Based on this study, it was recommended to use a complementary approach of source-specific substances to successfully characterize petrogenic emissions. Generally, a PAH-based source identification of petrogenic versus pyrogenic contaminations should be combined with petroleum biomarker analysis. PAH and biomarker ratios as well as individual biomarker fingerprints revealed a more comprehensive view on the quality and quantity of petrogenic emissions in sediments and soils.     

Ecotoxicological evaluation of Harbour sediments using marine organisms from different trophic levels

Background, Aim and Scope  The toxicity of contaminated sediments should be evaluated considering the direct exposure of laboratory organisms to whole sediments and the indirect exposure to elutriates or extracts (Tay et al. 1992, Byrne and Halloran 1999, Nendza 2002). The alga Dunaliella tertiolecta is indicated for the use in toxicity bioassays because it is highly sensitive to several xenobiotics. Harpacticoid copepods have been already used for toxicity testing and Tigriopus fulvus is a promising Mediterranean target-species in ecotoxicology (Todaro et al. 2001, Faraponova et al. 2003, Pane et al. 2005a). In this study, the toxicity of sediments collected in harbour sites of the Northeastern Adriatic Sea was evaluated by growth inhibition test with free living and alginate-immobilized Dunaliella tertiolecta and acute toxicity test with nauplii and adult Tigriopus fulvus with the aim of pointing out the importance to utilize model organisms from different trophic levels in sediment ecotoxicology. Methodology  Elutriates and whole sediments were tested on free living and immobilized (Pane et al. 1998) algal cells, and on laboratory reared copepods. Free-living D. tertiolecta were exposed to diluted elutriates in a static, multi-well plate system. Naalginate immobilized D. tertiolecta were placed in polystyrene inserts fitted with polyester mesh bottoms and exposed to a thin layer (2 mm) of whole sediments in multi-well plates (EPS 1992, Pane and Bertino 1999). Toxicity tests with copepods were carried out on Tigriopus fulvus nauplii (elutriates) and adults (whole sediments and elutriates). Same-aged nauplii useful for toxicity tests were obtained by egg sac detaching and consequent hatching stimulation (Pane et al. 2006). Newborn nauplii (I–II stage) were exposed to elutriates in multi-well plates provided with polystyrene inserts. Adult T. fulvus maintained in polystyrene inserts fitted with polyester mesh bottoms were placed in contact with a thin layer (2 mm) of whole sediment placed on multi-well plate bottoms. All end-points were evaluated after 96 h. Results  In general, the effects increased with the increasing of elutriate concentration up to 50%; the stimulation or inhibition of algal growth was statistically significant in comparison to the control. The inhibiting elutriates induced EC₅₀ variations of algal growth ranging from 66.9% to 74.3%. The mortality of T. fulvus nauplii was always < 25% after treatment with 100% elutriates and < 10% after treatment with 50% dilution; no effect was shown up with 25% dilution; therefore LC₅₀ was not calculable. The effect of elutriates was negligible on adult copepods and LC₅₀ values were never calculable; percent mortality always resulted in < 10% after treatment with whole sediments. Discussion  Both experimental systems gave substantially similar results after exposition to whole sediments and elutriates. During the experiment with algal cells, the immobilization in Na-alginate and the employment of inserts which allowed the contact of organisms with sediments and their easy counting were particularly useful. Likewise, the employment of inserts of adequate mesh size in the tests with copepods allowed the contact of organisms with the sediment and made organism handling and counting easy, as well as the evaluation of mortality. The methodology here described and the utilization of the proposed test-species could have an importance also considering that the current trend in ecotoxicological research is towards finding the most appropriate organism for specific areas of concern by using indigenous species (Mariani et al. 2006) and towards the major significance of chronic and reproductive end-points. Conclusions  Based on the above results, it can be stated that the bioassay with Dunaliella tertiolecta could be a good estimation tool for the ecotoxicological assessment of marine sediments. The immobilization of algae in Na-alginate was seen to be useful to evaluate the toxicity of whole sediments; the employment of polystyrene inserts allowed an improvement of the procedures. T. fulvus nauplii and adults, as other harpacticoids such as Tigriopus japonicus (Yoon et al. 2006), satisfy the basic criteria for the employment of a standard species in marine bioassays. To date only pelagic Acartia tonsa are utilized in the standardized procedure to evaluate the risk assessment of chemicals or wastewaters (ISO 1999). As, on the contrary, the exposure of copepods to solid-phase contaminants it is not yet standardized, the employment of polystyrene inserts improved the procedures for T. fulvus too. So, the rapidity and the possibility to solve practical problems could be the main attractive features of this technique (Pane et al. 2005a) when applied to whole sediments. Recommendations and Perspectives  The methodology here developed being also applicable to long term and reproduction tests should be recommended because it provides relevant information in comparison with other frequently applied, standardized biotests with crustaceans (ISO 1999). The procedure has been shown to be easily applicable to selected marine organisms. ESS-Submission Editor: Prof. Dr. Henner Hollert (henner.hollert@bio5.rwth-aachen.de)     

Partitioning characteristics of PAHs between sediment and water in a shallow lake

Goal, Scope and Background

Distribution of hydrophobic organic contaminants in abiotic compartments is essential for describing their transfer and fate in aquatic ecosystems. Taihu Lake is the third largest freshwater lake in China. Water quality of Taihu Lake has deteriorated greatly during the last decades and has threatened the water supply. The aim of the present study was to investigate the partitioning of polycyclic aromatic hydrocarbons (PAHs) among overlying water, suspended particulate matter (SPM), sediments, and pore water in Meiliang Bay, Taihu Lake and to provide useful information for the ecological engineering in this area.

Materials and Methods

Overlying water and surface sediment were sampled from six sites in Meiliang Bay, Taihu Lake, China. Within 72 h of sampling, sediments were centrifuged to obtain the pore water. Overlying water samples were filtered to separate dissolved and SPM samples. After extraction, samples were purified following a clean-up procedure. PAH fraction was obtained by elution with a mixture of hexane: DCM (7:3, V/V) and analyzed by GC/MS.

Results

PAHs concentrations in overlying water varied from 37.5 ng/L to 183.5 ng/L. Concentrations of PAHs in pore water were higher than those in overlying water. The total concentrations of 16 priority PAHs in sediments ranged from 2091.8 ng/g-dw to 4094.4 ng/g-dw. PAHs concentrations on SPM were decreased with suspended solid concentrations (SSC). Total PAHs concentrations on SPM varied in the range of 3369.6 ng/g-dw to 7531.1 ng/g-dw. The partition coefficients between sediment and overlying water (log K _oc) for PAHs with log K _ow<5 were positively correlated with their octanol-water partition coefficients (log K _ow) (n=39, r=0.79, p<0.0001). Partition coefficients between sediment and pore water (log K _oc′) for all PAHs were also significantly correlated with their log K _ow values (n=48, r=0.82, p<0.0001).

Discussion

In general, PAHs derived from combustion sources tend to bind strongly to soot particles in natural sediment. Consequentially, K _oc values observed in the natural environment could be orders of magnitude higher than those predicted by linear correlation relationships under laboratory conditions. In the present study, the ratio of log K _oc values to log K _ow values falls consistently above 1, indicating that the sediment soot carbon in the bay was more attractive for PAHs than n-octanol. The log K _oc′ was also higher than that predicted under laboratory conditions, suggesting that the measured pore water PAH concentrations were lower than those predicted. That is to say, not all the sediment PAHs can be available to partition rapidly into sediment pore waters. A variation in soot content is a possible reason. Furthermore, concentrations of PAHs on SPM were higher than those in sediments. The compositions of PAHs on SPM and in sediments were similar, indicating the importance of re-suspension process of sediments in the partitioning process of the shallow lake.

Conclusions

The results indicated the equilibrium partitioning model could be used to predict PAHs distribution in various phases of a shallow lake in the stagnation period, but re-suspension processes should be considered to modify the relationship between log K _ocs and log K _ows.

Recommendations and Perspectives

Concentration, particle size and composition of resuspended particles could affect the relationship between log K _ocs and log K _ows. Further work should be done under field conditions, especially where a steady thermodynamic equilibrium state could be assumed.

     

Determining the bioavailability of contaminants and assessing the quality of sediments

Background, Aims and Scope  

Our study determined if and when an avoidance or attraction behavioural response would be displayed by Ilyanassa obsoleta when presented with a choice between harbour and reference sediments. Our goal was to develop a non-lethal approach that could be used in future assessments of the environmental quality of field sediments.     

Mass spectrometry based sensor strategies for the authentication of oysters according to geographical origin

This study was undertaken to investigate the relevance of using the pyrolysis-MS (Py-MS) technique to discriminate the production area of oysters harvested over two years and to assess from the data of the second year of harvest the potential of an alternative MS-based technique, the solid phase microextraction-MS (SPME-MS), to perform this discrimination. Oysters were harvested in various areas of France, and models of discrimination according to harvest season were built from Py-MS fingerprints and from virtual SPME-MS fingerprints obtained by summing the mass spectra generated by the SPME-GC-MS system. The treatment of the Py-MS data by a 21-12-3 artificial neural networks led to a correct classification of only 89.2% of the oyster samples according to shoreline. The misclassifications thus did not allow use of the Py-MS technique as a relevant tool for authentication of oyster origin. The assessment of the potential of the virtual SPME-MS fingerprints to discriminate the production area of oysters was undertaken on a part of the sample set. The virtual SPME-MS data were pretreated according to two methods, filtering of raw data (FRD) and comprehensive combinatory standard correction (CCSC), a recently developed chemometric method used for the correction of instrumental signal drifts in MS systems. The results obtained with the virtual SPME-MS fingerprints are promising because this technique, when the data were pretreated by the CCSC method, led to a successful discrimination of the oyster samples not only according to shoreline but also according to production region. This study confirms that an efficient correction method (CCSC) of instrumental drifts can considerably increase the discriminative information contained in the volatile fraction of food products.