Development of an air-injection press for preventing blowout of particleboard V: effects of board density and thickness on property of board manufactured from high-moisture particles

Particleboards with thickness of 10 mm and densities of 0.6, 0.7 and 0.8 g/cm³ were manufactured from high-moisture particles using urea–formaldehyde resin and the effectiveness of air injection was examined. The temperature in the 0.6 and 0.7 g/cm³ boards was lower with air injection than without during the initial to middle stages of pressing, while the temperature in the 0.8 g/cm³ board remained lower with air injection than without throughout the entire pressing process. Air injection reduced the pressing time required to manufacture the 0.6 and 0.7 g/cm³ boards and also increased the internal bond strength of boards of all densities. In the 0.6 and 0.7 g/cm³ boards, air injection reduced the modulus of rupture (MOR), while in the 0.8 g/cm³ boards, the MOR was similar between those manufactured by injecting and not injecting air. Air injection was also found to be effective for boards of high densities. The effectiveness of the air injection on thick boards was investigated by manufacturing 20-mm-thick boards of 0.7 g/cm³. Without air injection, it was not possible to manufacture the 20-mm-thick boards, even by extended hot pressing, but air injection allowed the boards to be manufactured by pressing for 16 min. Air injection was also shown to be effective for manufacturing thick boards.     

Performance of particleboard manufactured using air-injection press II: effects of board density and thickness on the performance of board manufactured from low-moisture particles

Particleboards of different densities (0.6, 0.7 and 0.8 g/cm³) and thicknesses (10 and 20 mm) were manufactured from low-moisture particles using an air-injection press. The effects of the air injection on preventing blowout of the boards of different densities and thicknesses were investigated by artificially creating blowout-prone conditions using metal frames. The effects of the air-injection pressure on the board performance were also investigated. 10-mm-thick boards of 0.8 g/cm³ pressed at 170 °C blew out when air was not injected, but were successfully manufactured by injecting air. 10-mm-thick boards at 150 °C showed constant internal bond (IB), regardless of density, but at 170 °C, IB was higher in boards of higher densities. This was likely due to accelerated hardening of the urea–formaldehyde resin at 170 than 150 °C. At both pressing temperatures, low air-injection pressure did not cause blowout and a reduction in board performance. Air injection also prevented the blowout of thick boards of 20 mm and enabled successful manufacture, showing its effectiveness. The IB of the 20-mm-thick board manufactured using the air-injection press exceeded that of 20-mm-thick board manufactured using an ordinary hot press.     

Multiple inflammatory gastric polyps treated by endoscopic polypectomy with argon plasma coagulation in a dog

An 11‐year‐old spayed female miniature dachshund was evaluated for a 2‐month history of chronic vomiting. Abdominal ultrasonography revealed a heterogeneous mass in the pyloric region. Contrast upper gastrointestinal radiography demonstrated impairment of gastric outflow. Endoscopic examination revealed multiple polyps at the gastric pylorus. The pyloric polyps were variable in size, sessile‐shaped and pedunculated. Initially, endoscopic polypectomy was attempted, but all the polyps could not be completely resected. Thus, endoscopic polypectomy with argon plasma coagulation was performed to cauterise the lesions. The histopathological diagnosis of the lesions was inflammatory polyps, and a moderate number of Helicobacter spp. was revealed. After the argon plasma coagulation treatment, the dog did not vomit, and improvement of clinical signs was maintained for 13 months. Endoscopic polypectomy with argon plasma coagulation may be useful for mixtures of sessile and pedunculated polyps. The present report may provide a basis for further studies of argon plasma coagulation treatment for canine gastrointestinal polyps.     

Comparative analysis of organelle DNAs in acid citrus grown in Japan using PCR-RFLP method

PCR-RFLP analyses of three regions for each of chloroplast DNA (cpDNA; rbcL-ORF106, trnD-trnT, trnH-trnK) and mitochondrial DNA (mtDNA; nad7/exon2-exon3, nad7/exon3-exon4, 18S-5S) were performed in 26 cultivars of acid citrus grown in Japan to identify polymorphisms and classify them. The polymorphisms were compared with those of three true Citrus species, i.e., mandarin, pummelo and citron. Ichang papeda (C. ichangensis) was also included in this study to find its relationship with Yuzu. Inter-species cpDNA variation was recognized and the acid citrus were divided into three groups, namely; I (‘Yuzukichi’ and ‘Kinkoyu’), II [sour oranges (‘Kaiseito’, ‘Daidai’ and ‘China daidai’), ‘Nansho daidai’, ‘Kiku daidai’, C. sudachi (‘Mushi yukaku’, ‘Yushi yukaku’ and ‘Yushi mukaku’), C. sphaerocarpa (‘Kabosu’ and ‘Aka kabosu’), C. kizu (‘Taninaka kizu’, ‘Kinosu’ and ‘Kizu’), ‘Zanbo’, ‘Mochiyu’, ‘Jabara’ and ‘Naoshichi’], and III [Yuzu (‘Tetraploid’, ‘Tochikei yuzu’ and ‘Yamanekei yuzu’), ‘Matsuda sudachi’, ‘Zuishoyu’, ‘Hanayu’ and ‘Yuko’]. CpDNA restriction patterns of the three true Citrus species differed from each other as well as from those of ichang papeda. CpDNA restriction patterns of group I of the acid citrus were identical to those of mandarins. Group II showed the same as pummelos. CpDNA restriction patterns of group III were differed from those of the three true Citrus species in the three regions. This group was differed from ichang papeda after digestion of trnH-trnK PCR products with TaqI, HinfI and AluI, while they showed identical restriction patterns in two regions, rbcL-ORF106 and trnD-trnT. Citrons and ichang papeda were placed in groups IV and V, respectively. Based on mtDNA restriction patterns, the acid citrus were divided into three groups; i, ii and iii. In groups i and ii accessions of groups I and II of cpDNA were placed with mandarins and pummelos, respectively. In group iii accessions of group III of cpDNA were placed with ichang papeda. Citrons were placed in a distinct group, iv.     

Molecular detection of Mycoplasma wenyonii and 'Candidatus Mycoplasma haemobos' in cattle in Hokkaido, Japan

Blood samples from 78 cattle were tested for hemoplasma infection using molecular methods. PCR and sequence analysis revealed that 17 cattle were infected with Mycoplasma wenyonii, while 13 were infected with 'Candidatus Mycoplasma haemobos'. Four animals were infected with both species. This is the first study to report hemoplasma species infection among cattle in Japan.     

Isolation and culture of rabbit primordial germ cells

Primordial germ cells (PGCs) are embryonic precursors of the gametes of adult animals and are considered stem cells of the germline. Since their proliferation in vitro correlates well with the schedule of developmental changes in vivo, they might be interesting research tools for genomic imprinting, germ-cell tumors and fertility. Furthermore, once primordial germ cells are separated and placed on a feeder layer with cytokines, they become cultured pluripotent cell lines called embryonic germ (EG) cells. EG cells share several important characteristics with embryonic stem (ES) cells as they can also contribute to the germ line of chimeras. To investigate the characteristics of PGCs and establish rabbit EG (rEG) cells, we cultured rabbit PGCs (rPGCs) in vitro with various combinations of leukemia inhibitory factor (LIF), basic fibroblast growth factor (bFGF) and forskolin on inactivated mouse embryonic fibroblast (MEF) feeder layers. The present study found PGC proliferation in early cultures and induction of rEG-like colonies. These cells expressed pluripotent markers, such as alkaline phosphatase activity, OCT-4, Sox-2 and SSEA-1, in the undifferentiated state; however, the cells did not develop into a teratoma when injected into the kidney capsules of SCID mice, although the restricted differentiation potentials to neural cells were determined via embryoid body formation. From these characteristics and further characterization of the germ stem cell markers Vasa, SCP-1 and SCP-3, we suggested that these were hybrid cells with characteristics somewhere between PGC and EG cells.     

Dimensional stability and strength properties of particleboard produced by a closed-press system

The purpose of this study was to reveal the effects of various levels of mat-moisture content (m.m.c.) and the closed-press system for making single- or three-layer particleboard on the density profile, thickness swelling, specific moduli of elasticity (MOE) and rupture (MOR) and internal bond strength. Internal gas pressure was measured in an enclosed frame; and the larger the m.m.c., the higher the internal gas pressure became. When rising water vapor (steam) struck particles, it plasticized them and cured the adhesive, resulting in improved interparticle contact. The vertical density gradient in the three-layer board was larger than that in the single-layer board. As for thickness swelling by cold-water soaking, the single-layer boards were less affected than the three-layer boards and showed good dimensional stability with increased m.m.c. The open-system boards swelled more than the closed-system boards. The closed-system single-layer board made at high m.m.c. returned nearly to the prime thickness by air-drying after cold-water soaking. Specific MOE and MOR were larger at 15% or 10% m.m.c. than those at other m.m.c. Considerable reductions of specific MOR and MOE of the closed-system three-layer board were observed at 20% or 25% m.m.c.Part of this report was presented at the 45th annual meeting of the Japan Wood Research Society, Tokyo, April 1995 and at the 48th annual meeting of the Japan Wood Research Society, Shizuoka, April 1998     

Management and yield prediction of Kunugi (Quercus acutissima) grazing forests

This study deals with grazing in kunugi (Quercus acutissima) forests in the Aso district of Kyushu Island in southwest Japan. These forests are managed for production of bed-logs for shiitake mushrooms and cow-calf farming. One of their characteristics is short-term rotation such as 10–15 years for bed-logs and a year for calf production. A forest grazing experiment was begun in Minamioguni to look at forest growth, vegetation change and grazing intensity. Stem densities dropped in a few years. After sprout cutting, they also dropped gradually, then stabilized. Although grazing caused tree damage and suppressed tree growth, grazing intensity of up to 150 cow-days/ha·year did not harm forest regeneration. Herbage volume decreased as grazing was repeated and trees grew. Another investigation of kunugi grazing forests in Minamioguni and Asaji showed the correlation betweenRy (yield index in Stand density diagram) and grazing capacity could be expressed with a regression equation. The results were also used to design a yield table for kunugi grazing forests. The yield table has items ofRy and grazing capacity in addition to usual yield table items, and can indicate timber yield and grazing capacity at the same time. The table estimates that proper grazing capacity is 60–80 cow-days/ha·year in wild grass sites. In the light of these results, an optimal management plan was proposed as a diagram integrating stem density, forest yield, and forest management.     

Cytological and genetical studies on male sterility inCryptomeria japonica D. Don

Genetic male sterility is a useful trait in plant breeding, especially in angiosperm crops such as corn, onion and carrot. We found a male sterile sugi (Cryptomeria japonica D. Don) tree in Toyama, Japan. Pollen of sugi is one of the major causes of pollinosis in Japan. We carried out this research in an attempt to make clear the characteristics and inheritance of this male sterility. Microsporogenesis of the male sterile tree proceeded meiosis, however, the microspores collapsed after they were separated from pollen tetrads in locules, resulting in complete male sterility. Most likely, ethylene evolution was responsible for male sterility expression. Full seed setting in the male sterile tree indicated normal macrosporogenesis. Seeds obtained from crossing between male sterile and normal lines showed relatively high level of germination and their seedlings grew vigorously. The somatic chromosome numbers of 241 germinated seeds, derived from the male sterile tree, were mostly 22, euploid. These results indicated that male sterile tree was different from other similar previously reported trees with low pollen fertility, resulting from triploid or trisomics. Probably, male sterility in sugi is either nuclear genetic male sterility or cytoplasmic male sterility. The study was partially supported by Program for Promotion of Basic Research Actives for Innovative Biosciences.     

Linkage analysis of RFLP markers for clubroot resistance and pigmentation in Chinese cabbage (Brassica rapa ssp. pekinensis)

A restriction fragment length polymorphism (RFLP) – based linkage map of Chinese cabbage (Brassica rapa ssp. pekinensis) (2n=20) including two agronomic traits, clubroot resistance and orange-yellow pigmentation, was constructed using doubled haploid parents. The total linkage distance was 735 cM; 63 loci were distributed into ten linkage groups. Clubroot resistance of the parental line T136-8 to the current pathotype, race 2, was predominantly controlled by a single dominant gene that originated from European turnip. The locus for clubroot resistance by the dominant major gene (CRa) was mapped on linkage group 3, and RFLP loci HC352b and HC181 were located 3 cM and 12 cM from it, respectively. The locus HC352b was identified by a 4.4 Kb Eco R I fragment, which segregated for null allele. The absence of an allelic fragment in HC352b could be interpreted by deletion in the resistance source; homozygotes for CRa could be efficiently selected by detecting null types for the marker. Orange-yellow pigmentation expressed in head inner leaves and petals was governed by a single recessive gene. The locus (Oy) for the pigmentation was mapped on linkage group 1, being located 17–19 cM from three RFLP loci that were closely linked to each other. The linkage analysis for clubroot resistance and unique pigmentation revealed some informative RFLP markers. Identification of molecular markers for clubroot resistance and other agronomically important traits would provide useful information in breeding programs of Chinese cabbage. This revised version was published online in August 2006 with corrections to the Cover Date.