In vitro and in vivo antifungal activities of decursin and decursinol angelate isolated from Angelica gigas against Magnaporthe oryzae, the causal agent of rice blast

Blast is considered the most important fungal disease of rice due to its wide distribution and destructiveness under favorable conditions. Development of new effective and environmentally benign agents against the causal pathogen, Magnaporthe oryzae, is of great interest. In the course of a search for natural antifungal compounds in medicinal plants, we found that the methanol extract of Angelica gigas roots showed a potent control efficacy against rice blast caused by M. oryzae. We isolated antifungal coumarins from the extract, and they were identified as decursin and decursinol angelate. Antifungal activities of these compounds, along with kasugamycin, were tested on M. oryzae in vivo and in vitro. In an in vivo assay, the three compounds effectively suppressed the development of rice blast at concentrations more than 100 μg/mL. Coumarins showed relatively weak inhibitory effect on fungal mycelial growth when compared to kasugamycin. However, they strongly inhibited M. oryzae spore germination, which was not observed in kasugamycin treatments. This is the first report demonstrating that decursinol angelate can provide control against rice blast and that the two coumarins inhibit M. oryzae spore germination. In addition, the wettable powder formulation of the crude extract of A. gigas prohibited the development of blast symptoms on rice plants more effectively than liquid concentrate formulation of kasugamin, a commercial fungicide. Based on our study, we propose that coumarin compounds as well as the A. gigas root crude extract can be used as natural, benign fungicides for controlling rice blast.     

Levan fructotransferase from Arthrobacter oxydans J17-21 catalyzes the formation of the di-D-fructose dianhydride IV from levan

A new levan fructotransferase (LFTase) isolated from Arthrobacter oxydans J17-21 was characterized for the production of difructose dianhydride IV (DFA IV). LFTase was purified to apparent homogeneity by Q-Sepharose ion exchange chromatography, Mono-Q HR 5/5 column chromatography, and gel permeation chromatography. The enzyme had an apparent molecular mass of 54000 Da. The optimum pH for the enzyme-catalyzed reaction was pH 6.5, and the optimum temperature was observed at 45 degrees C. The LFTase was activated by the presence of CaCl(2) and EDTA-2Na but inhibited strongly by MnCl(2) and CuSO(4) at 1 mM and completely by FeSO(4) and Ag(2)SO(4) at 1 mM. A bacterial levan from Zymomonas mobilis was incubated with an LFTase; final conversion yield from the levan to DFA IV was 35%. Neither inulin, levanbiose, sucrose, dextran, nor starch was hydrolyzed by LFTase. DFA IV was very stable at acidic pH and high temperature, thus indicating that DFA IV may be suitable for the food industry and related areas.     

The Influence of CO2 Supply on Colonial Formation of Leptospires

The colonial formation of three serotypes of Leptospires on Cox's solid medium was promoted by microaerophilic incubation of one to three per cent of CO₂ supplied by carbon dioxide cylinder, sodium carbonate oxalic acid, and candle method. In anaerobic incubation Leptospira pomona grew the same as with CO₂ incubation.

The pH of the medium was an important influence on the rate of colonial formation of Leptospires.

Addition of hemoglobin and inactivation of rabbit serum was not an essential condition for rapid colonial formation. It was found that variation in the morphology of leptospiral colonies occurred with hemoglobin from different species and individuals.

     

Antiviral activity of Alpinia katsumadai extracts against rotaviruses

In vitro anti-rotavirus activity of Alpinia katsumadai (AK) extracts were evaluated against bovine G8P[7] and porcine G5P[7] rotaviruses in two different assay strategies, a mixed treatment assay and a post treatment assay. In the mixed treatment assay, six AK extracts [AK-1 (EtOH extract), AK-3 (H(2)O layer), AK-5 (40% methanol fraction), and AK-9-11 (H(2)O extract, polysaccharide fraction, supernatant fraction)] exhibited inhibitory activities against G5P[7] rotavirus with the EC(50) values ranging from 0.7±0.4 to 33.7±6.5 μg/mL. Extracts AK-1, AK-3, and AK-5 inhibited rotavirus infection against G8P[7] rotavirus, the with EC(50) values of 8.4±2.2 μg/mL, 6.5±0.8 μg/mL and 8.4±5.0 μg/mL, respectively. By hemagglutination inhibition (HI) assay, six AK extracts completely inhibited viral adsorption onto human RBCs in both strains of rotaviruses at less than 11 μg/mL. However, in the post treatment assay, there was no anti activity shown against both strains of rotaviruses. As a result, six AK extracts were attributed mainly to having a strong interaction with hemagglutinin protein on the outer surface of rotavirus, resulting to blockage of viral adsorption.     

Effect of supplementation of multi-microbe probiotic product on growth performance, apparent digestibility, cecal microbiota and small intestinal morphology of broilers

The present study investigated the effect of inclusion of multi-microbe probiotic product on growth performance, apparent digestibility of nutrients, cecal microbiota and small intestinal morphology in broilers. Four hundred days-old Ross chicks were randomly allotted to five treatments on the basis of body weight (BW). Each treatment had four replicates of 20 chicks in each. Experimental diets were fed in two phases, starter (day 0-21) and finisher (day 22-35). Dietary treatments were; basal diet without any antimicrobial (NC), basal diet added with 20 mg Avilamycin/kg of diet (PC), 10(7) cfu multi-microbe probiotic/kg of diet (P1), 10(8) cfu multi-microbe probiotic/kg of diet (P2), and 10(9) cfu multi-microbe probiotic/kg of diet (P3). Overall BW gain and feed conversion ratio were better (p < 0.05) for treatments PC, P2 and P3 compared with NC and P1, with P1 being better (p < 0.05) than NC. Overall feed intake in treatments PC, P1, P2 and P3 were greater (p < 0.05) than NC. Apparent digestibility of dry matter and crude protein were greater (p < 0.05) in treatments PC, P2 and P3 compared with NC, with P1 being intermediate and not different form NC, PC, P2 and P3. At d 21 and 35, treatments PC, P1, P2 and P3 showed lower (p < 0.05) cecal Clostridium and Coliforms count in relation to NC. Moreover, cecal Clostridium (d 21) and Coliforms (d 21 and 35) count were lower (p < 0.05) in treatment PC in relation to P1; with P2 and P3 being intermediate and not different from PC. However, there was no effect of dietary treatments on cecal total anaerobic bacteria and Bifidobacterium spp. count. The villus height of duodenum in treatment PC was greater (p < 0.05) than NC, with P1, P2 and P3 being intermediate. Villus height of ileum in treatment PC was greater (p < 0.05) than in treatments P1 and NC, whereas it remained comparable among treatments PC, P2 and P3. Villus height to crypt depth ratio of ileum was greater (p < 0.05) for treatment PC, P2 and P3 compared with that in P1 and NC. It is concluded that multi-microbe probiotic inclusion at 10(8) and 10(9) cfu/kg diet had beneficial effects on broilers growth performance, apparent digestibility of nutrients and intestinal morphology and can be used as replacement to antibiotics growth promoter in broiler nutrition.     

Comparing the osteogenic potential of canine mesenchymal stem cells derived from adipose tissues, bone marrow, umbilical cord blood, and Wharton's jelly for treating bone defects

Alternative sources of mesenchymal stem cells (MSCs) for replacing bone marrow (BM) have been extensively investigated in the field of bone tissue engineering. The purpose of this study was to compare the osteogenic potential of canine MSCs derived from adipose tissue (AT), BM, umbilical cord blood (UCB), and Wharton''s jelly (WJ) using in vitro culture techniques and in vivo orthotopic implantation assays. After canine MSCs were isolated from various tissues, the proliferation and osteogenic potential along with vascular endothelial growth factor (VEGF) production were measured and compared in vitro. For the in vivo assay, MSCs derived from each type of tissue were mixed with β-tricalcium phosphate and implanted into segmental bone defects in dogs. Among the different types of MSCs, AT-MSCs had a higher proliferation potential and BM-MSCs produced the most VEGF. AT-MSCs and UCB-MSCs showed greater in vitro osteogenic potential compared to the other cells. Radiographic and histological analyses showed that all tested MSCs had similar osteogenic capacities, and the level of new bone formation was much higher with implants containing MSCs than cell-free implants. These results indicate that AT-MSCs, UCB-MSCs, and WJ-MSCs can potentially be used in place of BM-MSCs for clinical bone engineering procedures.     

Assessment of growth and seed oil composition of kenaf (Hibiscus cannabinus L.) germplasm

This study was conducted to evaluate the growth characteristics and fatty acid composition among 15 kenaf mutants derived from the kenaf germplasm C14 and 15 kenaf accessions originating from Russia, India, China, Iran, and Italy. The overall growth performance (plant height, stem diameter, flowering date, leaf, and flower size) of the stem color mutant lines derived from C14 are similar to those of the original variety. However, the flower color mutant lines derived from C14 showed flowering to occur 10 days later when compared with the original variety and showed smaller leaf sizes than the original variety. Late-ripened kenaf accessions (Jinju, Auxu, and Jnagdae) can yield more bio-mass compared with early or medium-maturing germplasm. The late maturity kenaf (Auxu, Jinju, and Jangdae) has a higher oil percentage than the early maturity germplasm. Linoleic, oleic, and palmitic acids were the predominant fatty acids in all kenaf seeds. The stem color mutant lines significantly surpassed the parental means of all saturated fatty acids. In addition, the flower color mutant lines showed broad ranges of variation in oleic acid. The 15 accessions showed a wide range of fatty acid compositions, spanning from 29.75 to 38.30% saturated fatty acids and 61.70 to 70.24% total unsaturated fatty acids, and the late maturity kenaf has a higher linoleic acid percentage than the early maturity germplasm. The flowering period was highly positively (P ≤ 0.01) correlated with the plant height, stem diameter, oil percent, and linolenic acid (C_18:3), and it was significantly negatively (P ≤ 0.01) correlated with stearic acid (C_18:0). These results will provide valuable information to assist the parental selection of kenaf breeding.     

Evaluation of performance of sorghum varieties grown in Tokyo for sugar accumulation and its correlation with vacuolar invertase genes SbInv1 and SbInv2

ABSTRACT

The sugar-accumulating potential of global and local sweet and grain sorghum varieties were tested under the local conditions. The basis for this study was the dependency of sugar accumulation on temperature and photoperiod. Thus, the efficacy of cultivars as a bioenergy source would need to be determined based on their performance under the local environmental conditions. A strong correlation of sucrose content with brix was observed, enabling large-scale screening of varieties for high sucrose content. The morphological characteristics inherent in sweet sorghum, such as tall stems, greater number of leaves and a longer vegetative period, were found to correlate with the total stem sugar content. Assessment of sugars along the stem revealed maximum sugar accumulation in the upper intermediate to upper internodes in most of the varieties tested. The maximum theoretical ethanol yield (MTEY), a function of brix and juice yield, was determined as a better indicator of testing the performance of a variety as a potential source of bioethanol, mainly due to a negative correlation of stem juiciness and sucrose content in the varieties tested. Further, the relative expression of vacuolar invertase genes, SbINV1 and SbINV2, was studied, and a strong negative correlation of SbINV2 to stem sucrose content was observed. This reveals a possibility of involvement of vacuolar invertase gene, SbINV2, in sugar accumulation in sweet sorghum stems, and as a key candidate for molecular breeding studies for higher stem sugar content.     

Herbicidal and biological characteristics of a new benzenesulfonylurea compound K-11451 under submerged paddy conditions

The new benzenesulfonylurea K-11451, an α-hydroxy-β-fluoropropyl- compound, applied at 3–9 g ha ⁻¹, controlled annual and perennial weeds grown in submerged paddy soil under greenhouse conditions. It effectively controlled barnyardgrass at growth stages varying from pre-emergence to the five-leaf stage. The compound inhibited acetolactate synthase, I₅₀ values for the enzyme isolated from barnyardgrass and rice being 56 and 67 nM , respectively. K-11451 inhibited the growth of rice when it was transplanted at a shallow depth (0–1 cm) and water leaching from the paddy soil was high (3–5 cm per day). With a water depth of 3 cm, the compound appeared to move readily down into the paddy soil and had the relatively short half-life of 15.2 days under submerged paddy conditions. A mixture of K-11451 + mefenecet + daimuron (9 + 250 + 250 g ha⁻¹) controlled almost all weeds in the paddy field without injury to rice, so that the combination could be used as a ‘one-shot’ herbicide in rice culture.     

Effects of Processing Parameters on Physical Properties of Corn Starch Extrudates Expanded Using Supercritical CO2 Injection

Corn starch was extruded with a corotating twin-screw extruder (24:1 L/D ratio, 31-mm screw diameter) and supercritical CO₂ was injected as a blowing agent. The effects of barrel temperature (80–90°C), screw speed (150–250 rpm), and water injection (30–54 g/min) on specific mechanical energy (SME) input for the process and the physical properties of extrudates, such as expansion ratio, water absorption (WA), water solubility (WS), breaking stress, and elastic modulus, were examined using a response surface methodology. Barrel temperature had the greatest effect on physical properties of extrudates but not on SME input, whereas screw speed and water injection had significant effects on SME input. Extrudates had a smooth surface, and air cells were uniform and closed, providing low WA and WS. Using superimposed contour plots, optimum barrel temperature, screw speed, and water injection rate, based on maximum expansion ratio and minimum SME input, were 94–96°C, 155–175 rpm, and 36–39 g/min, respectively.