Iron availability from whey protein hydrogels: an in vitro study

The influence of whey protein hydrogel microstructure, filamentous versus particulate, on iron delivery was studied under different conditions, including simulated gastrointestinal conditions. Experiments were initially conducted to determine the impact of pH and enzymes on iron release. The results show that different iron release profiles can be obtained from filamentous and particulate gels. Particulate gels released more iron than filamentous gels at acidic pH, but the opposite was observed at alkaline pH. In the presence of pepsin at pH 1.2 or pancreatin at pH 7.5, both gel types showed increased protein hydrolysis, but only filamentous gels showed increased iron release, suggesting that matrix structure plays an important role in iron delivery. A dissolution test was carried out under gastrointestinal conditions to mimic the in vivo dissolution process. Filamentous gel released most of its iron during the intestinal phase of a simulated digestion, hence protecting iron during its transit in the gastric zone. Absorption of iron by the Caco-2 system, used to estimate intestinal absorption, revealed that filamentous gels favored intracellular iron absorption. These results suggest that filamentous gels show promise as matrices for transporting iron and promoting its absorption and therefore should be of major interest in the development of innovative functional foods.     

Evaluation of strength at the acrylic-pin interface for variably treated external skeletal fixator pins

Objective: To report pullout force to failure at the acrylic–pin interface for variably treated 3.2 mm external skeletal fixator pins. Study Design: In vitro biomechanical evaluation. Sample Population: 3.2 mm external skeletal fixator pins in polymethylmethacrylate bars. Methods: 3.2 mm external skeletal fixator pins were used for each of 5 treatment groups: polished, unpolished, 3 notched, 5 notched, and machine knurled. Each pin was seated into a 2‐cm‐diameter acrylic connecting bar and tested in pullout force to failure. Each group consisted of 6 pins. The force required to remove the pins from the acrylic bar was measured and compared between groups. Results: Significant differences between treatment groups were determined (P<.05). Within a construct group failure mode was consistent. Fracture of the acrylic bar was only seen with knurled pin ends. Conclusions: When using 2 cm acrylic bars in external skeletal fixation (ESF), a knurled pin shaft or a pin surface with 5 notches should be considered to improve the overall stability of the ESF construct.     

In vitro comparison of proximal ulnar osteotomy and distal ulnar osteotomy with release of the interosseous ligament in a canine model

Objective: To determine the effect of proximal ulnar osteotomy (PUO), distal ulnar osteotomy (DUO), and DUO with release of the interosseous ligament (DOLR) on displacement of the proximal ulna at the radioulnar joint. Study Design: Experimental mechanical study. Sample Population: Cadaveric, skeletally mature canine thoracic limb pairs (n=11). Methods: Thoracic limbs disarticulated at the elbow were randomly assigned to 1 of 2 groups: (A) limbs were tested with no treatment (NOTX), then with PUO; (B) limbs were tested with DUO followed by DOLR. A distraction force was applied to the proximal ulna with the distal limb secured in a frame, and displacement of the proximal ulnar segment at the radioulnar joint was recorded. Results: Mean displacement was 0.36 mm (95% confidence interval [CI]: 0?1.12 mm) in the NOTX group, 4.68 mm (95% CI: 3.82–5.55 mm) for PUO limbs, 0.95 mm (95% CI: 0.52–1.39 mm) for the DUO group, and 4.36 mm (95% CI: 3.71–5.02 mm) for the DOLR group. Mean ulnar displacement of the DOLR group was significantly different compared with the DUO group, but there was no significant difference between the PUO and DOLR groups. Conclusions: No significant difference was observed in displacement of the proximal ulnar segment after DOLR compared with PUO.     

Pericardial effusion and cardiac tamponade caused by intrapericardial granulation tissue in a dog

Objective – To describe and report successful surgical management of pericardial effusion and cardiac tamponade in a dog caused by intrapericardial granulation tissue.
Case Summary – An 8-month-old, intact male, Greater Swiss Mountain Dog was referred for cardiac evaluation following 2 weeks of progressive lethargy, abdominal distention, and difficulty breathing. On the day of presentation, the dog had an episode of acute collapse. A 14-cm multilocular pericardial cystic lesion causing collapse of the right atrial free wall and resulting in pericardial tamponade was observed on echocardiogram. After the dog subsequently experienced two acute episodes of pericardial effusion, a subtotal pericardectomy was performed and clinical signs resolved. The histopathologic diagnosis of the mass was inflammation and granulation tissue, likely caused by a resolving hematoma or abscess.
New or Unique Information Provided – This is the first report of intrapericardial granulation tissue as the cause of pericardial effusion and cardiac tamponade.     

Effects of protein sources and inclusion levels on nitrogen metabolism and urea kinetics of Nellore feedlot steers fed concentrate-based diets

Urea recycling occurs in all mammalian species and represents an important source of ruminal nitrogen (N) for ruminants fed protein-restricted diets. However, its importance for cattle fed adequate amounts of protein and energy remains unclear. Six Nellore feedlot steers fed concentrate-based diets were used in a 6 × 6 Latin square design with a 3 × 2 factorial arrangement of treatments to evaluate ruminal fermentation, urea kinetics, and N excretion. Treatments consisted of 3 protein sources (PS: soybean meal plus urea [SU], corn gluten meal [CGM], and dry distillers grains [DDG]) and 2 inclusion levels (PL; 11% and 14%). Steers were adapted to the diets for 14 d followed by 8 d of sample collection. Feed intake, fecal output, and urine production were measured from day 18 to day 22 of each period. Blood samples were collected every 6 h on day 18. [¹⁵N-¹⁵N]-urea was infused into the jugular vein for 82 h over day 19 to day 22, and measurement of ¹⁵N in background (day 18) and enriched feces and urine (day 21) were used to evaluate urea kinetics. To evaluate the incorporation of recycled urea N into microbial protein (MICP), ruminal and duodenal fluid were collected on day 22. Steers fed SU diets had lower (P < 0.05) nitrogen use efficiency (NUE), greater (P < 0.05) urea-N entry rate (UER), and tended (P < 0.10) to have greater gastrointestinal entry rate of urea-N (GER) compared with those fed CGM or DDG. In addition, steers fed SU had greater (P < 0.05) urea-N returned to ornithine cycle (ROC) compared with those fed CGM or DDG. Increasing PL tended (P < 0.10) to increase UER. The proportion of total microbial N from recycled urea-N was greater (P < 0.05) for steers fed CGM compared with those fed SU and also greater for steers fed diets with 11% CP than for those fed with 14% CP. Diets with 11% CP can be used for Nellore feedlot cattle fed concentrate-based diets without negatively affecting intake, digestibility, and ruminal fermentation. Moreover, diets containing rumen undegradable protein (RUP) feed sources (CGM or DDG) compared with diets with SU markedly increased NUE, while maintaining microbial protein (MICP) synthesis. Results from this study suggest that the equation adopted by NASEM (NASEM. 2016. Nutrient requirements of beef cattle. 8th revised ed. Washington, DC: The National Academies Press) was not accurate in estimating the urea-N used for anabolism (UUA) in Nellore feedlot cattle fed concentrate-based diets.     

Selected carbon fluxes in Pinus ponderosa-based silvopastoral systems, exotic plantations and natural pastures on volcanic soils in the Chilean Patagonia

This study was undertaken to measure certain carbon (C) fluxes in a Pinus ponderosa-based silvopastoral systems (SPS) in Patagonia, Chile. Results are compared to those from adjacent 18-year-old managed pine plantations (PPP) and natural prairie (PST). Litter decomposition was determined using the litterbag method. Leached soil solution was collected with tension lysimeters at 80 cm depth, and soil respiration evaluated in situ with the soda lime technique. Wind direction influenced the litterfall distribution in SPS, with 94 % falling in the tree strips and within 3 m on the east side. In the first 6 months the initial needle decomposition was low and less than 5 % of the initial mass. The overall soil organic carbon (SOC) and N contents (0–40 cm depth) decreased significantly in the order SPS > PST > PPP, and within SPS were greater in the alleys, starting at 2.5 m from the tree strip, with the highest values always eastward of the strip, suggesting influence by the wind direction. Total soil respiration decreased in the order PST > SPS > PPP and leached C decreased in the order PPP > PST > SPS. In general, the mean annual soil moisture in the pasture alleys of SPS was twice that of PST. The air/soil temperatures decreased significantly in the second year only in PST and at 2 m and beyond from the tree strip in SPS. Soil moisture varied significantly among treatments, but showed the strong influence exerted by trees in the creation of a favorable microclimate within the pasture alleys of SPS.     

Monoclonal antibodies to avian Escherichia coli Iss

Escherichia coli infections are a major problem for the poultry industry in the United States. Yet, the virulence mechanisms operative in avian E. coli are poorly understood. In the present studies, monoclonal antibodies (MAbs) have been generated that may facilitate study of the pathogenesis of avian colibacillosis. These MAbs are directed against the Iss protein because results from our laboratory have shown that the possession of iss DNA sequences is strongly correlated with the E. coli implicated in avian colibacillosis. As part of an overall effort to explore the role of iss/Iss in colibacillosis pathogenesis, Iss protein has been purified, MAbs to Iss have been generated, and the MAbs are being evaluated. B cells from mice immunized with an Iss fusion to glutathione-S-transferase produced antibodies specifically against Iss, and these cells were used to generate the MAbs. These anti-Iss MAbs, when used in western blotting assays, can be used to distinguish iss-positive and -negative E. coli isolates, suggesting that they may be useful as reagents in the detection and study of virulent avian E. coli.     

Genetic and economic efficiency of integrating reproductive technologies in cattle breeding programme in Kenya

Tropical Animal Health and Production - We hypothesised that use of reproductive technologies (RTs) would result in increases in economic and genetic gains of a dairy cattle breeding programme. A...     

Correction to: No evidence of Trichinella spp. in domestic pig carcasses at a selected abattoir in southern Botswana

Tropical Animal Health and Production - The article “No evidence of Trichinella spp. in domestic pig carcasses at a selected abattoir in southern Botswana”, written by Basiamisi Ernest...     

Bending Characteristics of Polymethylmethacrylate Columns,Connecting Bars of Carbon Fiber,Titanium, and Stainless Steel Used in External Skeletal Fixation and an Acrylic Interface

Objective: To (1) mechanically evaluate polymethylmethacrylate (PMMA) columns of various sizes and compare them to connecting bar materials (carbon fiber composite, titanium, stainless steel) and (2) compare the properties of an intact PMMA column to those of an acrylic interface. Study Design: Experimental mechanical study. Sample Population: Experiment 1: 6 groups of 6 specimens each; experiment 2: 2 groups of 12 specimens each. Methods: All specimens were tested in 3‐point bending. Stiffness, yield strength, and ultimate strength values were calculated for each specimen. Results: PMMA 1 columns (23.25 mm) compared favorably to titanium or stainless‐steel bars. PMMA 3 columns (30.15 mm) and carbon fiber bars had similar yield strength but PMMA 3 columns were less stiff than carbon fiber bars. PMMA 3 columns had lower bending modulus and a higher variability in their mechanical properties than PMMA 1 or PMMA 2 (25.64 mm) columns. Acrylic interface specimens were less strong but as stiff as intact specimens. Conclusion: An acrylic interface was easily created and had acceptable biomechanical characteristics. Clinical Relevance: PMMA 2 and PMMA 3 columns are not recommended for clinical use at this time. Further tests are needed to analyze an acrylic patch in a more clinically relevant loading model.