Synchytrium endobioticum – risk from biogas plants?

Synchytrium endobioticum is one of the most important pathogens of potato and is known for its persistent propagation structures. Under favourable conditions, infection of highly susceptible potato cultivars leads to clearly visible cauliflower‐like tissue warts, the typical symptom of potato wart disease. However, unfavourable infection conditions or low infection pressure may result in symptoms being overlooked. Thus, the introduction of pathogen structures into stages of the processing industry cannot be ruled out. As the amounts of processed potato products continue to rise, phytosanitary risks from processing discarded potatoes and potato waste in biogas plants have to be considered. Hence, the resilience of resting spores against mesophilic anaerobic digestion was analysed in stirred tank reactors. Laboratory‐scale results show that S. endobioticum not only withstands mesophilic anaerobic digestion but also subsequent storage of the digestate for at least 4 weeks. Large numbers of viable resting spores were detectable by microscopic assessment in all samples. Viability was proved and verified additionally by bioassay. Consequently, potatoes, potato waste and processing water from potato processing industries used in biogas plants pose a phytosanitary risk if the accruing digestates are returned as fertilizer to arable land.     

Prediction of Genetic Gain in Sweet Corn using Selection Indexes

Journal of Crop Science and Biotechnology - The cultivation of sweet corn is expanding in Brazil, but there are serious constraints about the availability of commercial cultivars. The selection of...     

Conductive 3D structure nanofibrous scaffolds for spinal cord regeneration

The complex nature of spinal cord injuries has provided much inspiration for the design of novel biomaterials and scaffolds which are capable of stimulating neural tissue repair strategies. Recently, conductive polymers have gained much attention for improving the nerve regeneration. In our previous study, a three-dimensional (3D) structure with reliable performance was achieved for electrospun scaffolds. The main purpose in the current study is formation of electrical excitable 3D scaffolds by appending polyaniline (PANI) to biocompatible polymers. In this paper, an attempt was made to develop conductive nanofibrous scaffolds, which can simultaneously present both electrical and topographical cues to cells. By using a proper 3D structure, two kinds of conductive scaffolds are compared with a non-conductive scaffold. The 3D nanofibrous core-sheath scaffolds, which are conductive, were prepared with nanorough sheath and aligned core. Two different sheath polymers, including poly(lactic-co-glycolic acid) PLGA and PLGA/PANI, with identical PCL/PANI cores were fabricated. Nanofibers of PCL and PLGA blends with PANI have fiber diameters of 234±60.8 nm and 770±166.6 nm, and conductivity of 3.17×10^-5 S/cm and 4.29×10^-5 S/cm, respectively. The cell proliferation evaluation of nerve cells on these two conductive scaffolds and previous non-conductive scaffolds (PLGA) indicate that the first conductive scaffold (PCL/ PANI-PLGA) could be more effective for nerve tissue regeneration. Locomotor scores of grafted animals by developed scaffolds showed significant performance of non-conductive 3D scaffolds. Moreover, the animal studies indicated the ability of two new types of conductive scaffolds as spinal cord regeneration candidates.     

Effect of nitrogen root zone fertilization on rice yield,uptake and utilization of macronutrient in lower reaches of Yangtze River,China

Improper application of nitrogen (N) has led to high N losses and low N use efficiency in the lower reaches of Yangtze River in China. An effective method to solve such problems is the deep fertilized N in root zone (RZF). Limited information is available on the effect of RZF on the uptake of macronutrients (N, P and K) and rice yield. Field experiments, conducted from 2014 to 2015, compared the farmer fertilizer practice (FFP, with 225 kg ha^?1 of N, split into three doses) and RZF using the same rate but placing N 5 cm away from rice roots in holes 10 cm deep (RZF10) or 5 cm deep (RZF5) as a single application. The highest mean yield (10.0 t ha^?1) was obtained in RZF10, which was 19.5% more than that in FFP. Root zone fertilization of urea (whether 10 cm deep or 5 cm deep) resulted in greater accumulation of N, P and K in stem, leaf sheaths, leaf blades and grains compared to that in FFP in sandy and in loam soils. The uptake of N, P and K was the highest in RZF10 (average at 176.7, 66.2 and 179.1 kg ha^?1, respectively), higher than that in FFP by 45.0, 17.0 and 22.6%, respectively. N apparent recovery efficiency was markedly higher in RZF10 (53.1%) than in FFP (27.5%). RZF10 significantly increased the N, P, K uptake compared with FFP under different N rates in both sandy and loam soils. These results suggest that the N, P and K input amount should be re-determined under RZF.     

Revisiting rice breeding methods – evaluating the use of rapid generation advance (RGA) for routine rice breeding

Rice production needs to increase in the future in order to meet increasing demands. The development of new improved and higher yielding varieties more quickly will be needed to meet this demand. However, most rice breeding programmes in the world have not changed in several decades. In this article, we revisit the evidence in favour of using rapid generation advance (RGA) as a routine breeding method. We describe preliminary activities at the International Rice Research Institute (IRRI) to re-establish RGA on a large scale as the main breeding method for irrigated rice breeding. We also describe experiences from the early adoption at the Bangladesh Rice Research Institute. Evaluation of RGA breeding lines at IRRI for yield, flowering time and plant height indicated transgressive segregation for all traits. Some RGA lines were also higher yielding than the check varieties. The cost advantages of using RGA compared to the pedigree method were also empirically determined by performing an economic analysis. This indicated that RGA is several times more cost effective and advantages will be realized after 1 year even if facilities need to be built. Based on our experience, and previous independent research empirically testing the RGA method in rice, we recommend that this method should be implemented for routine rice breeding in order to improve breeding efficiency.     

Evaluation of mechanical properties of jute/glass/carbon fibers reinforced hybrid composites

A study on the tensile and flexural properties of jute-glass-carbon fibers reinforced epoxy hybrid composites in inter-ply configuration is presented in this paper. Test specimens were manufactured by hand lay-up process and their tensile and flexural properties were obtained. The effects of the hybridization, different fibers content and plies stacking sequence on the mechanical properties of the tested hybrid composites were investigated. Two-parameter Weibull distribution function was used to statistically analyze the experimental results. The failure probability graphs for the tested composites were drawn. These graphs are important tools for helping the designers to understand and choose the suitable material for the required design and development. Results showed that the hybridization process can potentially improve the tensile and flexural properties of jute reinforced composite. The flexural strength decreases when partial laminas from a carbon/epoxy laminate are replaced by glass/epoxy or jute/epoxy laminas. Also, it is realized that incorporating high strength fibers to the outer layers of the composite leads to higher flexural resistance, whilst the order of the layers doesn’t affect the tensile properties.     

Evaluation of Particle Size Influence on Proximate Composition,Physicochemical, Techno-Functional and Physio-Functional Properties of Flours Obtained from Persimmon (<Emphasis Type="Italic">Diospyros kaki</Emphasis> Trumb.) Coproducts

The aim of the work was to study the influence of particle size in the composition, physicochemical, techno-functional and physio-functional properties of two flours obtained from persimmon (Diospyros kaki Trumb. cvs. ‘Rojo Brillante’ (RBF) and ‘Triump’ (THF) coproducts. The cultivar (RBF and THF) and particle size significantly affected all parameters under study, although depending on the evaluated property, only one of these effects predominated. Carbohydrates (38.07–46.98 g/100 g) and total dietary fiber (32.07–43.57 g/100 g) were the main components in both flours (RBF and THF). Furthermore, insoluble dietary fiber represented more than 68% of total dietary fiber content. All color properties studied were influenced by cultivar and particle size. For both cultivars, the lower particle size, the higher lightness and hue values. RBF flours showed high values for emulsifying activity (69.33–74.00 mL/mL), while THF presented high values for water holding capacity (WHC: 9.47–12.19 g water/g sample). The bile holding capacity (BHC) and fat/oil binding values were, in general, higher in RBF (19.61–12.19 g bile/g sample and 11.98–9.07, respectively) than THF (16.12–12.40 g bile/g sample and 9.78–7.96, respectively). The effect of particle size was really evident in both WHC and BHC. Due to their dietary fiber content, techno-functional and physio-functional properties, persimmon flours seem to have a good profile to be used as potential functional ingredient.     

Improvement of ink-jet printing performances using β-cyclodextrin forming inclusion complex on cotton fabric

Cotton fabric was modified with β-cyclodextrin (β-CD) forming inclusion complex to yield color strength, pattern sharpness, and color fastness for ink-jet printing. The modified cotton fabric was confirmed with the presence of new strong absorption peaks around 1713 cm^-1 and 1243 cm^-1 in FT-IR. β-CD had been covalently grafted on cotton fabric via the esterification reaction of citric acid (CTR) with cellulose and β-CD. The results indicated that printing performances of the ink-jet printed fabric were enhanced through β-CD modification. The K/S value was enhanced from 4.21 to 6.72, the width of printed line was decreased from 1.48 mm to 1.25 mm, and the color fastness was improved to 3-4 level. These improvements were due to the truncated cone structure of β-CD, which can form inclusions with water-based pigment. Meanwhile, the crease recovery performance was also improved with the aid of CTR. A comparison between the unmodified and modified cotton fabric suggested that the crease recovery angle of β-CD modified cotton fabric was increased by 25.0 % in the warp direction. Therefore, printing performance and crease recovery performance of β-CD modified and water-based pigment printed cotton fabric were enhanced remarkably.     

Diversity of root-knot nematodes in Moroccan olive nurseries and orchards: does <Emphasis Type="Italic">Meloidogyne javanica</Emphasis> disperse according to invasion processes?

Background

Root-knot nematodes (RKN) are major pest of olive tree (Olea europaea ssp. europaea), especially in nurseries and high-density orchards. Soil samples were collected from main olive growing areas of Morocco, to characterize Meloidogyne species and to discuss the contribution of biotic and abiotic factors in their spatial distribution.

Results

RKN were found in 159 soil samples out of 305 from nurseries (52.1% occurrence) and in 11 out of 49 soil samples from orchards (23.2% occurrence). Biochemical and molecular characterisation (PAGE esterase and SCAR) revealed the dominance of M. javanica both in nurseries and orchards with minor presence of M. incognita only in nurseries, and M. arenaria in only one nursery. RKN were distributed on aggregated basis. Frequent presence of M. javanica in orchards might have come from nurseries. In contrast, the detection of M. incognita in nurseries alone suggests that this species could not reproduce in orchards because of either the competition with other plant-parasitic nematodes or unfit local habitats. The impact of environmental variables (climate, habitat origin and physicochemical characteristics of the substrates) on the distribution of Meloidogyne species is also discussed.

Conclusion

Olive nurseries in Morocco are not able to guarantee the safety of rooted plants. As a result, olive production systems are exposed to strong RKN invasion risks. Consequently, the use of healthy substrates in nurseries may prevent plant-parasitic nematode induction in orchards.