Investigation of mechanical properties of developed antimicrobial PPsuture/Ag nanocomposite

In order to prevent surgical complications due to microbial infections, we have developed polypropylene suture grafted with silver nanoparticles (PPsuture/Ag nanocomposite) by a simple immersion procedure. Physical and mechanical properties of developed suture are investigated. Suture surface characteristics are examined by scanning electron microscopy (SEM) imaging and atomic force microscopy (AFM). Silver content on suture surface was determined by Inductively coupled plasma atomic emission spectroscopy (ICP-AES). The mechanical properties of developed antibacterial PP suture/Ag were studied. We note that proposed silver coating method has not affected mechanical performances of suture. Antimicrobial performances of PP suture/Ag nanocomposites against S. aureus and E. coli colonies were also investigated.     

Impact of land‐use intensity on the relationships between vegetation indices,photosynthesis and biomass of intensively and extensively managed grassland fens

Vegetation indices are widely used as model inputs and for non‐destructive estimation of biomass and photosynthesis, but there have been few validation studies of the underlying relationships. To test their applicability on temperate fens and the impact of management intensity, we investigated the relationships between normalized difference vegetation index (NDVI), leaf area index (LAI), brown and green above‐ground biomass and photosynthesis potential (PP). Only the linear relationship between NDVI and PP was management independent (R² = 0·53). LAI to PP was described by a site‐specific and negative logarithmic function (R² = 0·07–0·68). The hyperbolic relationship of LAI versus NDVI showed a high residual standard error (s.e.) of 1·71–1·84 and differed between extensive and intensive meadows. Biomass and LAI correlated poorly (R² = 0·30), with high species‐specific variability. Intensive meadows had a higher ratio of LAI to biomass than extensive grasslands. The fraction of green to total biomass versus NDVI showed considerable noise (s.e. = 0·13). These relationships were relatively weak compared with results from other ecosystems. A likely explanation could be the high amount of standing litter, which was unevenly distributed within the vegetation canopy depending on the season and on the timing of cutting events. Our results show there is high uncertainty in the application of the relationships on temperate fen meadows. For reliable estimations, management intensity needs to be taken into account and several direct measurements throughout the year are required for site‐specific correction of the relationships, especially under extensive management. Using NDVI instead of LAI could reduce uncertainty in photosynthesis models.     

Atypical thymoma in a horse: Diagnostic approach and application of an alternative histological classification system

Thymoma is a rare condition in horses. This case of a 24-year-old Warmblood gelding that was presented with oedema and signs of vascular congestion of the left forelimb caused by a thoracic mass is described. The diagnostic work-up included blood chemistry, cytology of pleural effusion, ultrasonography, radiography and the visualisation and collection of a tissue sample by thoracoscopy. Finally, post-mortem findings and histopathology revealed thymic epithelial neoplasia with histomorphologic features previously unreported in horses. The unique mixture of spindle-shaped and epithelioid tumour cells in combination with clear features of malignancy suggested the application of the Moran and Suster histological classification system for thymomas in humans (Moran and Suster, 2008, Curr. Treat. Options Oncol., 9, 288), which has not been reported in an equine case before and fits well to the present case.     

Conductive 3D structure nanofibrous scaffolds for spinal cord regeneration

The complex nature of spinal cord injuries has provided much inspiration for the design of novel biomaterials and scaffolds which are capable of stimulating neural tissue repair strategies. Recently, conductive polymers have gained much attention for improving the nerve regeneration. In our previous study, a three-dimensional (3D) structure with reliable performance was achieved for electrospun scaffolds. The main purpose in the current study is formation of electrical excitable 3D scaffolds by appending polyaniline (PANI) to biocompatible polymers. In this paper, an attempt was made to develop conductive nanofibrous scaffolds, which can simultaneously present both electrical and topographical cues to cells. By using a proper 3D structure, two kinds of conductive scaffolds are compared with a non-conductive scaffold. The 3D nanofibrous core-sheath scaffolds, which are conductive, were prepared with nanorough sheath and aligned core. Two different sheath polymers, including poly(lactic-co-glycolic acid) PLGA and PLGA/PANI, with identical PCL/PANI cores were fabricated. Nanofibers of PCL and PLGA blends with PANI have fiber diameters of 234±60.8 nm and 770±166.6 nm, and conductivity of 3.17×10^-5 S/cm and 4.29×10^-5 S/cm, respectively. The cell proliferation evaluation of nerve cells on these two conductive scaffolds and previous non-conductive scaffolds (PLGA) indicate that the first conductive scaffold (PCL/ PANI-PLGA) could be more effective for nerve tissue regeneration. Locomotor scores of grafted animals by developed scaffolds showed significant performance of non-conductive 3D scaffolds. Moreover, the animal studies indicated the ability of two new types of conductive scaffolds as spinal cord regeneration candidates.     

Effect of nitrogen root zone fertilization on rice yield,uptake and utilization of macronutrient in lower reaches of Yangtze River,China

Improper application of nitrogen (N) has led to high N losses and low N use efficiency in the lower reaches of Yangtze River in China. An effective method to solve such problems is the deep fertilized N in root zone (RZF). Limited information is available on the effect of RZF on the uptake of macronutrients (N, P and K) and rice yield. Field experiments, conducted from 2014 to 2015, compared the farmer fertilizer practice (FFP, with 225 kg ha^?1 of N, split into three doses) and RZF using the same rate but placing N 5 cm away from rice roots in holes 10 cm deep (RZF10) or 5 cm deep (RZF5) as a single application. The highest mean yield (10.0 t ha^?1) was obtained in RZF10, which was 19.5% more than that in FFP. Root zone fertilization of urea (whether 10 cm deep or 5 cm deep) resulted in greater accumulation of N, P and K in stem, leaf sheaths, leaf blades and grains compared to that in FFP in sandy and in loam soils. The uptake of N, P and K was the highest in RZF10 (average at 176.7, 66.2 and 179.1 kg ha^?1, respectively), higher than that in FFP by 45.0, 17.0 and 22.6%, respectively. N apparent recovery efficiency was markedly higher in RZF10 (53.1%) than in FFP (27.5%). RZF10 significantly increased the N, P, K uptake compared with FFP under different N rates in both sandy and loam soils. These results suggest that the N, P and K input amount should be re-determined under RZF.     

Predicting the potential geographic distribution of Bactrocera bryoniae and Bactrocera neohumeralis(Diptera: Tephritidae) in China using MaxEnt ecological niche modeling

Bactrocera bryoniae and Bactrocera neohumeralis are highly destructive and major biosecurity/quarantine pests of fruit and vegetable in the tropical and subtropical regions in the South Pacific and Australia. Although these pests have not established in China, precautions must be taken due to their highly destructive nature. Thus, we predicted the potential geographic distribution of B. bryoniae and B. neohumeralis across the world and in particular China by ecological niche modeling of the Maximum Entropy(Max Ent) model with the occurrence records of these two species. Bactrocera bryoniae and B. neohumeralis exhibit similar potential geographic distribution ranges across the world and in China, and each species was predicted to be able to distribute to over 20% of the globe. Globally, the potential geographic distribution ranges for these two fruit fly species included southern Asia, the central and the southeast coast of Africa, southern North America, northern and central South America, and Australia. While within China, most of the southern Yangtze River area was found suitable for these species. Notably, southern China was considered to have the highest risk of B. bryoniae and B. neohumeralis invasions. Our study identifies the regions at high risk for potential establishment of B. bryoniae and B. neohumeralis in the world and in particular China, and informs the development of inspection and biosecurity/quarantine measures to prevent and control their invasions.     

Whitened kernel surface: A fast and reliable method for assessing Fusarium severity on cereal grains by digital picture analysis

Fusarium head blight (FHB) is a cereal disease of major importance responsible for yield losses and mycotoxin contaminations in grains. Here, we introduce a new measurement approach to quantify FHB severity on grains based on the evaluation of the whitened kernel surface (WKS) using digital image analysis. The applicability of WKS was assessed on two bread wheat and one triticale grain sample sets (265 samples). Pearson correlation coefficients between Fusarium‐damaged kernels (FDK) and WKS range from r = 0.77 to r = 0.81 and from r = 0.61 to r = 0.86 for the correlation between deoxynivalenol (DON) content and WKS. This new scoring method facilitates fast and reliable assessment of the resistance to kernel infection and shows significant correlation with mycotoxin content. WKS can be automated and does not suffer from the “human factor” inherent to visual scorings. As a low‐cost and fast approach, this method appears particularly attractive for breeding and genetic analysis of FHB resistance where typically large numbers of experimental lines need to be evaluated, and for which WKS is suggested as an alternative to visual FDK scorings.     

Evaluation of Particle Size Influence on Proximate Composition,Physicochemical, Techno-Functional and Physio-Functional Properties of Flours Obtained from Persimmon (<Emphasis Type="Italic">Diospyros kaki</Emphasis> Trumb.) Coproducts

The aim of the work was to study the influence of particle size in the composition, physicochemical, techno-functional and physio-functional properties of two flours obtained from persimmon (Diospyros kaki Trumb. cvs. ‘Rojo Brillante’ (RBF) and ‘Triump’ (THF) coproducts. The cultivar (RBF and THF) and particle size significantly affected all parameters under study, although depending on the evaluated property, only one of these effects predominated. Carbohydrates (38.07–46.98 g/100 g) and total dietary fiber (32.07–43.57 g/100 g) were the main components in both flours (RBF and THF). Furthermore, insoluble dietary fiber represented more than 68% of total dietary fiber content. All color properties studied were influenced by cultivar and particle size. For both cultivars, the lower particle size, the higher lightness and hue values. RBF flours showed high values for emulsifying activity (69.33–74.00 mL/mL), while THF presented high values for water holding capacity (WHC: 9.47–12.19 g water/g sample). The bile holding capacity (BHC) and fat/oil binding values were, in general, higher in RBF (19.61–12.19 g bile/g sample and 11.98–9.07, respectively) than THF (16.12–12.40 g bile/g sample and 9.78–7.96, respectively). The effect of particle size was really evident in both WHC and BHC. Due to their dietary fiber content, techno-functional and physio-functional properties, persimmon flours seem to have a good profile to be used as potential functional ingredient.     

Improvement of ink-jet printing performances using β-cyclodextrin forming inclusion complex on cotton fabric

Cotton fabric was modified with β-cyclodextrin (β-CD) forming inclusion complex to yield color strength, pattern sharpness, and color fastness for ink-jet printing. The modified cotton fabric was confirmed with the presence of new strong absorption peaks around 1713 cm^-1 and 1243 cm^-1 in FT-IR. β-CD had been covalently grafted on cotton fabric via the esterification reaction of citric acid (CTR) with cellulose and β-CD. The results indicated that printing performances of the ink-jet printed fabric were enhanced through β-CD modification. The K/S value was enhanced from 4.21 to 6.72, the width of printed line was decreased from 1.48 mm to 1.25 mm, and the color fastness was improved to 3-4 level. These improvements were due to the truncated cone structure of β-CD, which can form inclusions with water-based pigment. Meanwhile, the crease recovery performance was also improved with the aid of CTR. A comparison between the unmodified and modified cotton fabric suggested that the crease recovery angle of β-CD modified cotton fabric was increased by 25.0 % in the warp direction. Therefore, printing performance and crease recovery performance of β-CD modified and water-based pigment printed cotton fabric were enhanced remarkably.