DOC leaching from a coniferous forest floor: modeling a manipulation experiment

The DyDOC model simulates the C dynamics of forest soils, including the production and transport of dissolved organic matter (DOM), on the basis of soil hydrology, metabolic processes, and sorption reactions. The model recognizes three main pools of soil C: litter, substrate (an intermediate transformation product), and humic substances. The model was used to simulate the behavior of C in the O horizon of soil under a Norway spruce stand at Asa, Sweden, that had been subjected to experimental manipulations (addition and removal) of above‐ground litter inputs and to removal of the Oi and Oe layers. Initially, the model was calibrated using results for the control plots and was able to reproduce the observed total soil C pool and ¹⁴C content, DOC flux and DO¹⁴C content, and the pool of litter C, together with the assumed content of C in humic substances (20% of the total soil C), and the assumed distribution of DOC between hydrophilic and hydrophobic fractions. The constant describing DOC exchange between micro‐ and macropores was estimated from short‐term variations in DOC concentration. When the calibrated model was used to predict the effects of litter and soil manipulations, it underestimated the additional DOC export (up to 33%) caused by litter addition, and underestimated the 22% reduction in DOC export caused by litter withdrawal. Therefore, an additional metabolic process, the direct conversion of litter to DOC, was added to the model. The addition of this process permitted reasonably accurate simulation of the results of the manipulation experiments, without affecting the goodness‐of‐fit in the model calibration. The results suggest that, under normal conditions, DOC exported from the Asa forest floor is a mixture of compounds derived from soil C pools with a range of residence times. Approximately equal amounts come from the litter pool (turnover time 4.6 yr), the substrate pool (26 yr), and the humic‐substances pool (36 yr).     

How does forest certification contribute to boreal biodiversity conservation? Standards and outcomes in Sweden and NW Russia

Forest Stewardship Council (FSC) is one of the leading forest certification schemes. While many studies concern political aspects and social outcomes of FSC, little is known about the contribution of certification to biodiversity conservation. In Europe, the Russian Federation and Sweden have the largest areas of FSC-certified forest. We assessed the potential of FSC certification for boreal biodiversity conservation in terms of standard content, and outcomes as habitat area set aside and habitat network functionality. First, we compared the biodiversity conservation indicators at different spatial scales in Swedish and Russian FSC standards. Second, focusing on one large state forest management unit in each country, we compared the areas of formally and voluntarily set aside forests for biodiversity conservation. Third, we evaluated the structural habitat connectivity by applying morphological spatial pattern analysis, and potential functional connectivity by using habitat suitability index modelling for virtual species. The Russian standard included indicators for all spatial scales of biodiversity conservation, from tree and stand to landscape and ecoregions. The Swedish standard focused mainly on stand and tree scales. The area of voluntary set-asides for FSC was similar in Sweden and Russia, while formal protection in the Russian case study was three times higher than in the Swedish one. Swedish set-aside core areas were two orders of magnitude smaller, had much lower structural and potential functional connectivity and were located in a fragmented forestland holding. We conclude that to understand the potential of FSC certification for biodiversity conservation both the standard content, and its implementation on the ground, need to be assessed. We discuss the potential of FSC certification for biodiversity conservation with different levels of ambition. We stress the need for developing rapid assessment tools to evaluate outcomes of FSC for biodiversity conservation on the ground, which could be used by forest managers and FSC-auditors toward adaptive governance and management.     

Production strategies in the Swedish softwood sawmilling industry

The strategic production decisions to improve profits for sawmills can be described in three main dimensions. More value-added production increases unit revenues, larger volumes reduce fixed costs per produced unit, and improved productivity reduces unit costs. Using data about the Swedish sawmills and cluster analysis, six groups of sawmills were defined with these strategy dimensions. Characteristics of each strategy are presented concerning ownership, location, technology, and economic indicators. The results indicate that different groups of Swedish sawmills employ different production strategies, which are reflected both in the dimensions, value-added shares, size, productivity, and by other technical and economic characteristics of the sawmills. The relationships between production strategy and profitability is also analysed and discussed.     

Twist of wood studs: dependence on spiral grain gradient

Distortions due to moisture changes during drying or in service are a major problem for construction timber. Twist, caused mainly by the cylindrical geometry, the orthotropic nature of the wood material, and the tendency of the wood fibers to grow in a spiral around the stem, is often regarded as the most detrimental distortion of sawn timber. There is a need for a basic mechanical understanding of how the twist distortion arises and also a need for a simple formula to predict the amount of twist distortion. In this article such a formula is proposed, and theory and experimental data that indicate the validity of the formula are shown. The first term in the formula is a modification of a traditional expression which is proportional to the mean value of the spiral grain angle in the cross section in question. The second term in the formula is new and is proportional to the gradient of the spiral grain angle, and this term normally counteracts the first term so that a stud with a left-handed spiral grain might achieve a right-handed twist. Linear elastic finite element method (FEM) results and comparisons with experimental data show that the formula works well and that linear FEM calculations exaggerate the twist, which is probably partly due to nonlinear effects. The formula could be used to predict the twist of sawn timber from measured spiral grain angles on the log surface.     

Nondestructive detection of decay in living trees

We used a four-point resistivity method to detect wood decay in living trees. A low-frequency alternating current was applied to the stem and the induced voltage measured between two points along the stem. The effective resistivity of the stem was estimated based on stem cross-sectional area. A comparison within a group of trees showed that trees with butt rot had an effective resistivity that was at least a factor of two lower than that of healthy trees. In tests on several groups of Norway spruce (Picea abies (L.) Karst.) comprising more than 300 trees in total, the method detected butt rot with high accuracy. We validated the method both by measurements and by finite element modeling and simulations.     

Management of hydrops amnion in a mare resulting in birth of a live foal

CASE DESCRIPTION: A 19-year-old Thoroughbred mare was evaluated at 265 days of gestation with a markedly distended abdomen and edema of the ventral portion of the abdomen. CLINICAL FINDINGS: The uterus was distended over the pelvic rim, making transrectal palpation of the fetus impossible. Transabdominal ultrasonography revealed excessive amounts of fetal fluid. Results of analysis of fluid obtained via amnio- and allantocentesis confirmed that the amniotic cavity was large. TREATMENT AND OUTCOME: The mare was monitored for signs of weakness of the prepubic tendon and abdominal wall. The fetus and placenta were monitored for signs of stress and pending abortion. Flunixin meglumine and altrenogest were administered to the mare. Parturition was attended and occurred at 321 days' gestation. Postpartum complications in the mare included hypovolemic shock and cardiac arrhythmias. Both conditions were treated, and the mare recovered. The foal was considered small, had bilateral angular limb deformities, and was unable to nurse. The foal was given plasma for failure of passive transfer of immunity. Ten months later, the foal underwent procedures to correct limb deformities. CONCLUSIONS AND CLINICAL RELEVANCE: Hydrops conditions are rare in horses, with hydrops allantois occurring more frequently than hydrops amnion; reportedly result in fetal or neonatal death; and may result in death of or injury to the mare. Close monitoring of maternal and fetal health in combination with supportive treatment of the mare can result in the safe progression of a hydrops pregnancy and the birth of a live foal.     

In-Pack Surface Pasteurization of Capture-Based,Pre-Rigor Filleted Atlantic Cod (Gadus morhua)

In this study, we targeted the surface bacteria of high quality vacuum-packed cod loins to investigate how this affected the shelf life. After heat processing, the storage temperature was kept at 4°C in order to mimic supermarket shelf conditions. Samples that had undergone minimal heating regimes were compared with control samples as well with samples that were heated into the core. Shelf life was assessed based on the findings of a sensory analysis and on microbial growth data and supported by measurements of liquid loss and pH. Surface pasteurization of these samples seems to prolong shelf life only to a limited degree, even for samples with a low initial contamination level. Transportation of some bacteria into the filet, possibly during the intense rigor mortis progress triggered by the heat process, may have created a general flux of water in the samples. Underneath the surface, these bacteria are exposed to a limited thermal load and very little microbial competition. Surface pasteurization is an efficient method to reduce microbial contamination of many foodstuffs. In the case of fresh fish, however, surface pasteurization seems to have a limited effect due to the structure of the muscle and the subsequent storage condition.     

Experiments with Two Methods of Forming Pins for Transfixing Fractures of the Long Bones in Large Animals

The immobilization of fractures of the long bones in large animals after transfixation with fibre-glass re-inforced plastic bandages depends to a large extent on the method of forming the pins used to transfix the bones. The experiments described show a significant decrease in the displacement of bone fragments when parallel bent pins are used compared to that noted when parallel straight pins are used. The necessity of securely anchoring the pins in the bandage is also demonstrated. No damage to the bones was seen in any of the experiments. The bandage material showed complete firmness at all loads tested. The quality of the pins was such that no breakages occurred. Two 3 mm pins could be used in each fragment with complete safety and reliability.