谏壁发电厂泵站改造实践

为解决渣浆泵在运行时轴封水供应困难的问题，计算了谏壁发电厂松林山泵站的装置特必,天详细分析论证的基础上，确定了泵站的改造方案，进行了叶轮的优化设计。     

新型蔬菜专用肥在叶菜上的使用效果

新型蔬菜专用肥采用N、P、K和含粘土矿物、Ca、Mg及其他微量元素的营养型土壤改良剂复配而成。大田试验表明，在三种叶菜上的增产效果优于进口复合肥和国内常用的复混肥料，增产率分别达6.52%-13.2%和6.4%-27.5%，收益分别增加13.3%-23.6%和7.2%-32.9%，施用新型蔬菜专用叶面肥具有提高土壤pH值，增加代换性Ca和Mg，提高土壤有效N、P、K的效果。     

现代集约化肉羊业主要关键技术研究与应用

专门化肉用种羊选定、引进后，通过适应性研究，在较大规模养羊业生产实践中。对现代集约化肉羊业的主要关键技术进行研究、完善和创新，组装集成并应用于生产。技术研究应用结果既为市场提供了大批专门化肉用种羊和优质安全的杂种肉羊，取得了高水平的研究成果及显著的经济效益和社会效益．又为我国目前正在迅速发展的集约化肉羊业提供了可靠的技术支持和理想的生产模式：从适宜的专门化肉羊品种到运用高效母羊快速扩繁技术．建立和完善有效的肉羊杂交利用体系，普遍应用种羊鲜、冻精生产大批肉用杂种羔羊，种植高产优质饲草及其科学加工调制和利用．建立严格兽医防疫制度．实行放牧 补饲或全舍饲的精细管理和集约化育肥，至生产优质、安全、标准肉羊，获得显著的经济效益和社会效益。     

Phenotypic plasticity of two invasive alien plant species inside a deciduous forest in a strict nature reserve in Italy

ABSTRACT

Invasive alien plant species (IAPs) represent one of the main biological threats to biodiversity worldwide. Information about their phenotypic plasticity are needed to increase awareness about their future invasive potential. A study about phenotypic plasticity in response to contrasting light regimes and its quantification by a plasticity index (PI) of two IAPs (Ailanthus altissima and Robinia pseudoacacia) inside a Strict Nature Reserve was conducted. R. pseudoacacia showed a 70% higher PI, with a strongly greater value at morphological leaf level, associated with a greater ability to survive and grow in forest understory, explaining its greater widespread. Otherwise, A. altissima showed its highest PI at physiological level, which was associated with the ability to colonize and grow in environments with high-light regimes. Based on these results, the conservative management has limited the presence of A. altissima by its lower ability to grow in forest understory. In fact, the small-scale gaps in the forest infrastructure, that could allow its recruitment, are originated only from the death of a single tree or small group of trees. Regarding R. pseudoacacia, it is critical to maintain this type of management because any disturbances resulting in large openings could further promote its presence inside the Reserve.     

Density responses and spatial distribution of cotton yield and yield components in jujube (Zizyphus jujube)/cotton (Gossypium hirsutum) agroforestry

Trees are the dominant species in agroforestry systems, profoundly affecting the performance of understory crops. Proximity to trees is a key factor in crop performance, but rather little information is available on the spatial distribution of yield and yield components of crop species under the influence of trees in agroforestry systems. Also, little information is available on how crop density may be exploited to optimize the yield in such systems. Here we studied the performance of cotton in jujube/cotton agroforestry. Field experiments were conducted in 2012 and 2013 in Hetian, Xinjiang, China. Cotton was grown at a row distance of 60 cm in three densities, 13.5, 18.0 and 22.5 plants m⁻² in six m wide paths between tree lines in a jujube plantation. Plant density affected both cotton aboveground dry matter and yield significantly. The highest yield was attained at the intermediate density of 18.0 plants m⁻² (20.0 plants m⁻² corresponding in sole cotton), lower than the optimal density in sole cotton (25.0 plants m⁻²). Yield at the lower density was constrained by the low number of bolls per m² as a direct consequence of the low density, whereas at the high plant density yield was constrained by a lower allocation of assimilates to cotton seed and lint, as a consequence of intraspecific and interspecific competitions. There were strong gradients in yield and yield components in relation to the distance from the tree rows. Leaf area and total dry matter of cotton in rows close to the tree lines were reduced, especially in the rows next to the trees. Moreover, biomass allocation to cotton fruits was reduced in these rows. Competitive influences from the trees on cotton performance extended two rows deep in a six-year old jujube stand, and even three rows deep in a seven-year old stand. Shading effects on cotton yield were compensated by increasing plant density as a result of greater boll numbers per unit ground area. Data from this study help guide the design of optimal plant density of cotton in jujube plantations and give insight in the spatial distribution and dynamics of competitive effects in agroforestry systems in general.     

茶叶生产格局演变及空间集聚效应研究——以广东省为例

明确茶叶生产格局的演变特征和集聚效应,对广东省茶叶产业规划布局具有重要意义。引入空间重心模型,运用GIS技术和空间自相关分析方法分析广东省茶叶生产格局的演变过程、演变特征,采用空间自相关分析探究茶叶生产的空间集聚效应,研究结果表明：（1）1992—2017年广东省茶叶种植面积和茶叶产量稳步提升,2008年以后增速较为明显;（2）茶叶生产空间差异明显。粤北和粤东地区茶叶种植总面积占到广东全省的85%以上,茶叶产量占到83%以上,粤西和珠三角缩减较为明显;（3）广东省茶叶生产重心具有整体向东偏北迁移的趋势。茶园面积和茶叶产量重心的东移反映出广东省茶叶生产已呈现逐渐向粤东和粤北地区集聚的态势;（4）广东省茶叶生产空间极化和空间溢出作用显著,已经形成了以饶平、潮安、大埔、丰顺、五华、兴宁、英德、东源等县区的茶叶生产集聚区,构成了广东省茶叶生产的“热点区”,并对周边县市产生带动和刺激效应;（5）地理环境等自然因素是茶园规模扩张的基础,政府的政策激励和支持是茶叶产业形成的重要驱动力,巨大的市场消费力是茶叶产业迅速发展的直接因素,新品种和新技术的应用和推广是茶园面积扩张的重要原因。广东省茶叶生产空间集聚效应进一步增强,应根据地区自然资源、地理条件、种植传统等因素,推进茶叶生产区域集群化发展,提升广东茶叶的市场竞争力。     

基于定向定量堆放的马铃薯收获机设计

在研究小型马铃薯收获机的基础上,设计了一款能根据收集薯块质量往特定方向堆放的马铃薯收获机,主要由挖掘装置、输送装置及定向定量堆放装置等组成。在马铃薯收获机的后部设计一个四分区临时集薯器,能根据所收获马铃薯的质量来打开集薯器,将收集的马铃薯向中间或者一侧堆放,从而实现了马铃薯的连续挖掘及收集薯块的定向定量间隔堆放,可在较大程度上降低人工捡拾的工作量,同时避免拖拉机碾压伤薯。     

县域耕地土壤养分时空变异特征研究

土壤养分空间变异研究是精准农业实施的前提,对提高粮食作物单位面积产量和保护农业生态环境具有重要作用。为掌握陕西渭北旱塬区土壤养分时空变异规律,综合空间自相关和重心模型,分析1980—2007年、2007—2017年白水县耕地土壤有机质(SOM)、速效磷(AP)和速效钾(AK)的时空变异特征。结果表明：(1)研究区土壤SOM的平均含量分别增加了1.29、3.22 g·kg^-1,AP的平均含量分别增加了6.89、24.45 mg·kg^-1,仅有AK的平均含量呈现出先减少后增加的趋势。(2)三期耕地土壤养分的变异系数范围为30.2%～90.8%,属于中等变异。1980—2017年,耕地土壤SOM、AP和AK的全局Moran’s I指数均降低,空间结构性减弱,随机因素作用增强。(3)土壤SOM、AP和AK含量均有不同程度的增加,土壤SOM含量总体呈北低南高分布,土壤AP、AK含量分布情况较为一致,呈东高西低。(4)土壤SOM含量重心在东南方向发生偏移,AP、AK含量重心在东北方向发生偏移。土壤养分标准差椭圆空间分布格局同研究区分布方向一致,转角呈现“...     

Flexure-torsion Analysis of Variable-curvature-box Girder Considering Non-coincidence of Torsion Center and Gravity Center

In order to consider the effect of non-coincidence of torsion center and gravity center,the rectangular variable-curvature-box girder with vertical symmetrical axis is studied. Considering the influence of shear deflection and non-coincidence of torsion center and gravity center, the elastic equilibrium formulas are established. Based on deformation equations of the girder and the relations of inner forces and deformations,the flexure-torsion differential equations are developed. The equilibrium differential equations and Galerkin methods formulas for clothoid curved box girder are presented.