汽车变速器齿轮修形仿真分析

汽车变速器的关键部件齿轮因其加工和装配质量的影响,工作时容易引起振动噪声大及承载能力降低等问题,而齿轮修形是解决这些问题的有效方法,且成本较低。针对某款汽车变速器,利用Romax对齿轮进行修形分析。结果表明,修形后减小了齿轮的传动误差和最大接触应力,齿面载荷分布更加合理。有效改善了齿轮的传动性能,增加了齿轮寿命。     

Sectioned pelvic fin ray ageing of muskellunge Esox masquinongy from a Virginia river: comparisons among readers, with cleithrum estimates, and with tag–recapture growth data

Abstract  The potential utility of pelvic fin rays as ageing structures was evaluated for southern US muskellunge Esox masquinongy Mitchill populations by comparing age estimates among three readers and against cleithrum estimates, and by comparing observed length changes of tagged fish with changes predicted from growth equations based on pelvic fin ray age estimates. Mean coefficient of variation in age estimates among all readers and between the two readers with prior ageing experience was 17.8% and 5.6%, respectively. Exact and within 1-year agreement rates between pelvic fin rays and cleithra were 76% and 100%, respectively. Mean (± 2 SE) estimated absolute error between observed and predicted length changes for 13 tagged muskellunge was 30 ± 14 mm. This evaluation indicated that pelvic fin rays may prove to be a useful, non-lethal method for ageing muskellunge in southern US waters. Validation studies are still needed to ensure that growth rings form consistently throughout fish's life span.     

控制工程造价不是盲目压价

本文对工程造价管理角度进行了论述,从不同的角度分析了控制工程造价的方法,阐明如 何科学地控制工程造价。     

非平行直纹面的电解磨削

为解决整体叶轮扭曲叶片型面的精加工难题,本文进行了五轴联动数控展成电解磨削的基础研究.在分析平行直纹展成电解磨削整体叶轮扭曲叶片的过切误差、得到过切误差计算公式的基础上,提出用圆锥磨轮和组合式五轴联动数控方案来消除过切误差的方法.文中还介绍了数控展成电解磨床的结构与运动、经济型多轴数控系统及其联动控制方法,并建立了电解磨削非平行直纹展成曲面的数学模型,开发了五轴联动数控展成电解磨削自动数控编程系统,对航空发动机整体叶轮的叶片型面进行电解磨削.结果表明,加工效率比手工修磨、抛光提高了12倍以上.     

森林资源二类续档误差及原因分析

针对当前森林资源数据二类续档存在的问题,在对永安市大坑采育场大坑工区进行小班实地调查的基础上,以2003年初二类调查小班主要调查因子数据与1996年二类调查续档至2002年底数据进行对比,分析其误差及产生原因,并提出相关建议。     

An investigation of uncertainty in field habitat mapping and the implications for detecting land cover change

Land cover data for landscape ecological studies are frequently obtained by field survey. In the United Kingdom, temporally separated field surveys have been used to identify the locations and magnitudes of recent changes in land cover. However, such map data contain errors which may seriously hinder the identification of land cover change and the extent and locations of rare landscape features. This paper investigates the extent of the differences between two sets of maps derived from field surveys within the Northumberland National Park in 1991 and 1992. The method used in each survey was the Phase 1 approach of the Nature Conservancy Council of Great Britain. Differences between maps were greatest for the land cover types with the smallest areas. Overall spatial correspondence between maps was found to be only 44.4%. A maximum of 14.4% of the total area surveyed was found to have undergone genuine land cover change. The remaining discrepancies, equivalent to 41.2% of the total survey area, were attributed primarily to differences of land cover interpretation between surveyors (classification error). Differences in boundary locations (positional error) were also noted, but were found to be a relatively minor source of error. The implications for the detection of land cover change and habitat mapping are discussed.     

基于MCMC模拟的MGPD模型及其在地质灾害风险度量中的应用

基于马尔科夫链蒙特卡洛(简记为MCMC)模拟的参数贝叶斯估计,对改进的广义帕累托分布(简记为MGPD)模型进行了优化,并利用该模型得到了地质灾害损失的在险损失值(简记为VaR)和条件损失值(简记为CVaR).以湖南娄底市地质灾害损失数据进行实证分析及模型适应性检验,结果表明:优化后的模型不仅具有很好的极值数据描述能力,而且具有较强的适用性.     

基于PCA-SVR-ARMA的狮头鹅养殖禽舍气温组合预测模型

为提高狮头鹅养殖禽舍气温预测精度,提出了基于主成分分析(Principal Component Analysis,PCA)、支持向量回归机(Support Vector Regression,SVR)融合自回归滑动平均(Autoregressive Moving Average,ARMA)模型的狮头鹅养殖禽舍气温组合预测模型。在建模过程中,运用主成分分析法筛选狮头鹅养殖禽舍气温的关键影响因子,消除变量之间冗余信息,约简预测模型结构;采用SVR-ARMA构建狮头鹅禽养殖舍气温组合预测模型,先通过SVR对气温进行预测,再由基于ARMA模型的残差预测值修正气温预测结果。利用该模型对广东省汕尾市2018年7月21日至2018年7月30日期间的狮头鹅养殖禽舍气温进行预测。结果表明,该组合预测模型取得了良好的预测性能,与标准BP神经网络、标准SVR、PCA-BPNN(反向传播神经网络,BackPropagationNeuralNetwork)、PCA-SVR和PCA-BPNN-ARMA等模型对比分析,其评价指标平均绝对误差、均方根误差和平均绝对百分比误差分别为0.183 2℃、0.454 0℃和0.005 9,均表明所提出的组合模型具有更高的预测效果,不仅能够满足狮头鹅养殖禽舍气温实际精准调控的需要,还为狮头鹅健康养殖和种苗繁育环境精细化管理提供决策。     

西北旱区喷灌条件下紫花苜蓿生长特征与品质指标的关系

西北旱区由于独特的气候条件,生产的苜蓿干草品质好,产量高。如何根据苜蓿的田间指标估测干草品质参数,对于苜蓿草产品生产销售具有重要意义。研究在喷灌条件下不同灌溉量对紫花苜蓿的生长品质的影响,并利用生长指标对紫花苜蓿的品质进行预测。试验于2014至2015年于中国农业大学石羊河流域生态节水试验站进行为期2年的田间试验。试验共设3个灌溉处理:A₁灌溉量为100%紫花苜蓿蒸腾蒸散量(ETc),A₂,A₃的灌溉量分别为A₁处理的66%,33%,以及一个不灌溉处理A₄。结果表明,苜蓿生长指标如株高(H)和茎叶比(SLR)随生育期的推进呈上升趋势,而鲜干比(FDR)呈下降趋势;所有生长指标随着灌溉量的减少均呈下降趋势。在品质方面,随着生育期的推进,所有处理的粗蛋白(CP)呈下降趋势,而中性洗涤纤维(NDF)和酸性洗涤纤维(ADF)则呈现上升趋势;随着灌溉量的降低,NDF与ADF呈下降趋势,而CP则呈上升趋势。各生长指标与品质指标的拟合结果表明,H和SLR均与各品质指标显著线性相关(P<0.001),且H与品质拟合结果相关系数最高(R²>0.900),而FDR则与各品质指标不显著。这些结果表明,在田间管理较好,长势良好,杂草与病虫害发生较少的情况下,可以用株高对苜蓿干草品质做出预测。