Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

有源负载恒温槽性能分析

本文阐述了有源负载恒温槽的工作原理，推导了描述其静态特性的缩减因数表达式，并对这种恒温槽的性能和应用作出了评价。     

聚集器式气力集尘装置几个主要设计参数的合理确定

合理确定聚集器的静压、压力平衡基准、聚集器的压力损失、设计流量等参数，对于保证集尘装置工作的可靠性和经济性都有重要意义。     

双质量飞轮内部传动结构强度及疲劳寿命分析

随着初级飞轮与次级飞轮相对转角的变化,分段变刚度双质量飞轮具有不同的刚度特性和非线性变化转矩,双质量飞轮内部传动结构作为传递动力和运动部分,结构可靠性和使用寿命必须保证.将建立的三维CAD模型导入HyperMesh软件中进行有限元分析前处理,建立了有限元分析模型,经过仿真求解计算,分析了结构变形、应力分布特点,对比分析...     

海上平台立式长轴消防泵转子静力学特性分析

为了研究立式长轴消防泵转子的静力学特性,以XBC18-178-240 LC3型号的立式长轴消防泵为研究对象.首先根据设计参数通过Creo建立了立式长轴消防泵内部流场的三维模型以及转子的物理模型,采用CFX对该泵在0.20Qd,0.65Qd,1.00Qd,1.20Qd,1.40Qd和1.50Qd这6种工况下进行3级泵内流...     

装载机工作装置结构有限元分析

装载机工作装置设计水平的高低直接影响其作业性能的好坏,进而影响整机工作效率。本文基于有限元分析理论,研究了工作装置的静力分析问题,建立了有限元模型,对6种典型载荷工况进行了分析,为工作装置的设计提供了依据。采用自由度耦合模拟销轴的铰接为类似结构边界条件的处理提供了一种实用方案。     

Characteristics and dynamics analysis of Populus euphratica populations in the middle reaches of Tarim River

Populus euphratica Oliv. is widely distributed along the Tarim River. Maintaining stability of P. euphratica population is important to local development. This study explored the static life table, survivorship curves and four function curves (survival rate, cumulative mortality rate, mortality density, and hazard rate), and development index of P. euphratica population in the middle reaches of Tarim River. The results indicated that the age structure of P. euphratica population belonged to positive pyramidal type, which meant young age-class individuals occupied most populations. The number ofⅠ-Ⅱage classes accounted for 66.2% of whole population, and this indicated that there were abundant subsequent seedlings resources to support the growth of P. euphratica population in the middle reaches of Tarim River. The survivorship curve of P. euphratica belonged to the Deevey Ⅲ (concave-type) and the development index was 47.72%. Four function curves revealed that the individuals of P. euphratica sharply decreased at the initial stage and then leveled off at the late stage of survival curve. Time sequence prediction models predicted that the number of midlife individuals would increase in future 10, 20, 30 years, and P. euphratica population grew steadily as a result of rich saplings.     

水稻白叶枯病菌在离体培养条件下生物膜形成的检测

分析了不同培养和测试条件(塑料和玻璃表面、培养时间、培养温度和培养基)对水稻白叶枯病菌(Xanthomonas oryzae pv. oryzae,Xoo)生物膜形成的影响,并测定了不同地区来源的Xoo野生型菌株、基因缺失突变体的生物膜形成。结果表明,在聚苯乙烯表面生长、用M210培养基在23 ℃下静止培养24 h是Xoo生物膜形成比较适宜的条件;不同地区来源的菌株生物膜形成能力不同;鞭毛相关基因fleQxoo、fliExoo和rbfCxoo以及H2O2降解调控基因oxyRxoo的缺失突变均影响生物膜形成。     

丘陵山地拖拉机加载仿形试验台设计

针对丘陵山地拖拉机电液悬挂控制系统试验条件复杂,过程繁琐以及重复性较差等问题,设计一种室内加载仿形试验台。该试验台由安装位置可调整的坡地仿形模块与辅助装置、模拟加载模块以及测控系统等功能模块组成,在电液伺服控制系统的作用下模拟丘陵山地拖拉机的作业坡度和耕作阻力,测试拖拉机电液悬挂控制系统性能。以TS-404H拖拉机为试验对象,坡地等高线为作业路线,运用该试验系统进行丘陵山地拖拉机电液悬挂系统的坡地自适应调整试验,对试验台系统的坡地仿形模块和模拟加载模块进行试验验证。结果表明：在预定坡度目标0°～15°范围内,该试验台仿形模块模拟坡度的最大误差为4.2%,平均误差为3.8%,调整时间1.2s,超调量为9%;当模拟土壤阻力为6.5kN时,加载模块的响应时间为1.2s、最大误差4%,平均误差2%,能够满足中小型丘陵山地拖拉机电液悬挂控制系统对试验设备的性能要求。     

闭式脱粒滚筒的静动态性能分析

针对联合收割机中闭式脱粒滚筒有可能在外载荷作用下会发生较大变形和在外激励作用下发生共振的问题,采用SolidWorks软件对闭式脱粒滚筒进行了三维建模,以*.x_t格式导入Ansys Workbench建立有限元模型,然后对闭式脱粒滚筒进行静动态性能分析(即静态分析和模态分析)。静态分析结果表明,闭式脱粒滚筒的刚度和强度足够,变形均在设计允许范围之内;模态分析得到的闭式脱粒滚筒前6阶固有频率和振型结果表明,在规定的工况范围内,闭式脱粒滚筒在外激励作用下不会产生共振。研究结果为后续样机的设计和改进提供了理论依据。