Physical properties of tung seed: An industrial oil yielding crop

Data on physical properties of seeds have significant importance for machinery and process equipments design. This study was conducted to investigate some physical properties of tung seed (Aleutites Fordii) namely, dimensions, 100 unit mass, arithmetic mean diameter, geometric mean diameter, sphericity, aspect ratio, surface area, bulk density, true density, porosity, terminal velocity and coefficient of friction. The applications of these properties are also discussed. The tung seed has an average of 13.24% (d.b.) moisture and 40.37% oil content. The average seed length, width, thickness were 22.61 mm, 20.35 mm, 13.95 mm, respectively. The average surface area of tung seed is 1084.20 mm² while the sphericity and aspect ratio were 0.82 and 90.07%, respectively. The average bulk density of seed was 0.502 g/cm³ while the true density was 0.995 g/cm³, and the corresponding porosity was 49.88%. The terminal velocity was 8.3 m/s. The static coefficient of friction on three different contacting materials has been found out and the results showed that the mean value of static coefficient friction was least in case of aluminum sheet while it is highest for plywood.     

Biomass sorghum production and components under different irrigation/tillage systems for the southeastern U.S.

Renewable energy sources are necessary to reduce the U.S. dependence on foreign oil. Sorghum (Sorghum bicolor L.) may be a reasonable alternative as an energy crop in the southern U.S. because it could easily fit into existing production systems, it is drought resistant, and it has large biomass production potential. An experiment was conducted to evaluate several types of sorghum as bioenergy crops in Alabama: grain sorghum - NK300 (GS), forage sorghum - SS 506 (FS), and photoperiod sensitive forage sorghum - 1990 (PS). These sorghum crops were compared to forage corn (Zea mays L.) - Pioneer 31G65 in 2008 and 2009 with and without irrigation, and under conventional (total disked area, 0.15 m deep) and conservation tillage (in-row subsoiling, 0.30 m deep) in a strip-split-plot design. The parameters evaluated were: plant population (PP), plant height (PH), sorghum/corn aboveground dry matter (ADM), biomass moisture content (ABMC), and biomass quality (holocellulose, lignin, and ash). Sorghum had greater ADM than corn; however, corn had lower ABMC than sorghum. Lodging was observed in PS and FS, probably due to high plant populations (>370,000 plants ha⁻¹). Irrigation affected ADM positively in both years, but conservation systems improved ADM production only in 2009. Holocellulose, lignin, and ash variation differed significantly among crops but were lower than 8.3%, 2.0% and 1.9%, respectively, for both years and considered minor. Under conditions of this study, PS was considered the best variety for ADM production as it yielded 26.0 and 30.1 Mg ha⁻¹ at 18 and 24 weeks after planting (WAP).     

Moisture-dependent physical properties of Karanja (Pongamia pinnata) kernel

The moisture-dependent physical properties are important to design post harvest equipments of the product. The physical properties of Karanja kernel were evaluated as a function of moisture content in the range of 8.56–22.22% d.b. The average length, width, thickness and 1000 kernel mass were 25.29 mm, 15.58 mm, 7.88 mm and 1036.45 g, respectively, at moisture content of 8.56% d.b. The geometric mean diameter and sphericity increased from 14.55 to 15.97 mm and 0.57 to 0.6 as moisture content increased from 8.56 to 22.22% d.b., respectively. In the same moisture range, the bulk density decreased from 663 to 616 kg/m³, whereas the corresponding true density and porosity increased from 967 to 1081 kg/m³ and 31.44 to 43.02%, respectively. As the moisture content increased from 8.56 to 22.22% d.b., the angle of repose and surface areas were found to increase from 27.69 to 37.33° and 665.74 to 801.63 mm², respectively. The static coefficient of friction of Karanja kernel increased linearly against the surfaces of three structural materials, namely plywood (28.72%), mild steel sheet (29.88%) and aluminium (18.86%) as the moisture content increased from 8.56 to 22.22% d.b.     

玉米秸秆覆盖对春小麦田土壤物理性状的影响

为了明确生物覆盖对塔里木盆地绿洲区土壤性能的影响,采用田间试验研究了玉米秸秆不同覆盖处理方式对土壤容重、温度及含水量的影响。结果表明,覆盖处理、立秆处理都较常规处理降低了土壤容重。在春小麦播种期和分蘖期,覆盖处理的5cm土层温度最低,较常规处理的分别低2.13℃和1.79℃;15cm土层温度较常规处理的分别低2.36℃和1.90℃;土层加深10cm土壤温度的最高点和最低点都延迟3h出现。土壤含水量表现为0～10cm土层立秆、覆盖处理的土壤含水量均较常规处理的高,而10～20cm土层则表现为立秆、覆盖处理的土壤含水量均较常规处理的低。     

Rice straw mulching and nitrogen response of no-till wheat following rice in Bangladesh

Wheat (Triticum aestivum L.) cultivation in no-till soil of a postrice harvest field utilizes residual soil moisture and reduces the time period from rice harvest to wheat seeding in intensive rice-wheat cropping systems. Some of the major constraints in no-till wheat production are high weed infestation, poor stand establishment due to rapid drying of topsoil and low nitrogen use efficiency (NUE). A field experiment was conducted at the research farm of the Wheat Research Centre, Dinajpur, Bangladesh, for two consecutive years to overcome those constraints, to evaluate rice straw as mulch, and to determine the optimum application rate of nitrogen (N) for no-till wheat. The treatments included 12 factorial combinations of three levels of mulching: no mulch (M₀), surface application of rice straw mulch at 4.0 Mg ha⁻¹ that was withdrawn at 20 days after sowing (M₁), the same level of mulch as M₁ but allowed to be retained on the soil surface (M₂), and four nitrogen levels (control 80, 120 and 160 kg ha⁻¹). Rice straw mulching had a significant effect on conserving initial soil moisture and reducing weed growth. Root length density and root weight density of wheat were positively influenced both by straw mulching and N levels. N uptake and apparent nitrogen recovery of applied N fertilizer were higher in mulch treatments M₁ and M₂ as compared to M₀. Also mulch treatment of M₁ and M₂ were equally effective at conserving soil moisture, suppressing growth of weed flora, promoting root development and thereby improved grain yield of no-till wheat. N application of 120 kg ha⁻¹ with straw mulch was found to be suitable for no-till wheat in experimental field condition.     

Determinants of ruminant nutritional quality of pearl millet [Pennisetum glaucum (L.) R. Br.] stover: I. Effects of management alternatives on stover quality and productivity

The paper investigates management and cultivar type effects on pearl millet stover yield and fodder quality. Sixteen pearl millet cultivars available to farmers in India were selected to represent three cultivar types: (1) traditional landrace germplasm from the arid/semi-arid millet production zones, (2) improved dual-purpose (grain and stover) open-pollinated varieties incorporating differing amounts of traditional landrace germplasm and (3) commercial, grain-type F1 hybrids, bred for use in the arid/semi-arid zone. The cultivars were grown for 2 years (2000 and 2001) at high fertility (HF: 65 kg N ha⁻¹ and 18 kg P ha⁻¹) and low fertility (LF: 21 kg N ha⁻¹ and 9 kg P ha⁻¹). Within each fertility level high (HP) and low (LP) plant population densities were established by varying sowing rate and then thinning to the target populations (HP: 11 plants m⁻² and LP: 5 plants m⁻²). Stover fodder quality traits (nitrogen concentration, sugar content, in vitro digestibility and metabolizable energy content) were analyzed using a combination of conventional laboratory analysis and near infrared spectroscopy. In general, fertility level and cultivar type had strong effects on grain and stover yields, and on a range of stover nutritional quality traits, but with significant year interactions. In contrast, the effect of population density on these variables was largely insignificant. Higher fertilizer application significantly increased grain and stover yields and stover nitrogen concentration, in vitro digestibility and metabolizable energy content. As a result, fertilization resulted in significant increases in the yields of both digestible and metabolizable stover. Landrace cultivars as a group produced higher quality fodder than modern hybrids, but at a significant cost in grain yield. Dual-purpose, open-pollinated cultivars were generally intermediate between the landraces and hybrids, in terms of both stover quality and grain yield, but produced the highest yields of both digestible and metabolizable stover. The paper discusses the implications of these findings for Indian pearl millet farmers with various resource levels and farming objectives.     

Morphological traits and allocation patterns related to stress-tolerance and seed-yield in wild and domesticated evening primrose (Oenothera L. Onagraceae)

Wild evening primrose species (Oenothera spp.) native to Argentina, have been suggested as a new crop for irrigated valleys of semi-arid Patagonia. This paper describes patterns of biomass allocation, morphological traits related to stress-tolerance and seed-yield in four species of Oenothera grown in a common garden at three plant densities. Wild and domesticated species are compared. The effect of resource availability on those traits during three phenological stages (vegetative, reproductive and maturity) is described. Native species were characterized by traits related to stress-tolerance (high root allocation and low specific leaf area) during the vegetative stage. This suite of traits resulted in low biomass accumulation and low seed-yield. The domesticated O. biennis was characterized by a combination of traits related to stress-tolerance (low specific leaf area) and high productivity (high leaf allocation and leaf area ratio and low root allocation). Domesticated species accumulated more biomass than natives. Total biomass and total non-structural carbohydrates present in roots were positively correlated to seed-yield.Oenothera biennis showed the highest seed-yield, although this species showed yield instability in response to changes in the environmental quality. No changes in seed-yield in response to plant density were recorded for either O. lamarckiana or native species. Oenothera biennis showed an optimum density of 20 plants m⁻² and yielded 260 g m⁻², a seed-yield similar to that reported in other countries. Low seed-yield of native species is major drawback that must be overcome. Improving seed-yield in these species could be possible by selection oriented to increase total biomass. Since no detrimental effect of density was found in O. lamarckiana and natives, a higher plant density might increase yield production per unit area.     

Strawboard from vapor phase acetylation of wheat straw☆

Commercial ground wheat straw was used in a central composite response surface experimental design to examine four acetylating process variables: reaction temperature, reaction time, initial moisture content of straw, and the vapor flow rate of chemical reagent. The response variable was acetyl content determined as a function of straw weight gain. Diphenylmethyane diisocyante was used as a binder to prepare board samples with a hot press. Equilibrium moisture content (EMC) was determined at 65 and 90% RH at 27°C, and dimensional stability was determined using a humidity cycle of 30–90% RH at 27°C. ASTM D1037-93 standard method for a 3-point flex test was used to measure mechanical properties. The microstructures of both treated and untreated wheat straw and boards were observed with a scanning electron microscope. The vapor phase acetylation system used acetylated ground wheat straw to a 24% weight gain (dry weight basis). A mathematical model (R²=0.97) was developed to predict the weight gain as a function of the four acetylation processing variables. The maximum reduction in all strawboard properties occurred at the highest weight gain (24%). The strawboard EMC decreased (30% maximum reduction) as weight gain increased at both 65 and 90% RH. The strawboard dimensional stability increased as the weight gain increased (maximum reductions of 80% in thickness swell and 50% in linear expansion). The initial mechanical properties of the strawboards decreased as the weight gain increased (maximum reductions of 64% in strength and 48% in stiffness). The density of the strawboards decreased as the weight gain increased (23% maximum reduction). SEM micrographs showed no physical evidence of structural damage to cell walls from the acetylation.     

Effects of long-term use of sodic water irrigation, amendments and crop residues on soil properties and crop yields in rice-wheat cropping system in a calcareous soil

One of the options to ameliorate the deleterious effects of sodic water irrigation is to apply gypsum to soil. We examined whether the application of organic manures or crop residue can reduce the need for gypsum in calcareous soils. A long-term field experiment with annual rice-wheat cropping rotation was conducted for 15 years (1991-2006) on a non-saline calcareous sandy loam soil (Typic Ustochrept) in northwestern, India. The irrigation water treatments included good quality canal water (CW) and sodic water (SW) with residual sodium carbonate (RSC) of 10 mmol_c L⁻¹ from 1991 to 1999 and of 12.5 mmol_c L⁻¹ from 2000 onwards. Gypsum was applied at 0, 12.5, 25, and 50% of the gypsum requirement (GR), to neutralize RSC of the SW. Three organic material treatments consisted of application of farmyard manure (FYM) at 20 Mg ha⁻¹, Sesbania green manure (GM) at 20 Mg ha⁻¹, and wheat straw (WS) at 6 Mg ha⁻¹. The organic materials were applied every year to the rice crop. Continuous irrigation with sodic water for 15 years without gypsum or organic materials resulted in a gradual increase in soil pH and exchangeable sodium percentage (ESP), deterioration of soil physical properties, and decrease in yields of both rice and wheat. The cumulative yield loss in SW irrigated plots without gypsum and organic materials remained <1.5 Mg ha⁻¹ for up to eight years in the case of rice and up to nine years in the case of wheat. Thereafter, marked increase in pH and ESP resulted in further depression in yields of rice by 1.6 Mg ha⁻¹ year⁻¹ and wheat by 1.2 Mg ha⁻¹ year⁻¹. Application of gypsum improved physical and chemical properties of the soil. The beneficial effects on crop yields were visible up to 12.5% GR in rice and up to 50% GR in wheat in most of the years. All the organic materials proved effective in mobilizing Ca²⁺ from inherent and precipitated CaCO₃ resulting in decline in soil pH and ESP, increase in infiltration rate, and a increase in the yields of rice and wheat crops. Although the application of organic materials resulted in comparable reductions in pH and ESP, the increase in yield with SW was higher for both crops with FYM. Pooled over the last six years (2000-2006), application of FYM resulted in 38 and 26% increase in rice and wheat yields, respectively, over SW treatment; corresponding increases in 50% GR treatment (recommended level) was 18 and 19%. During these years, application of GM and WS increased wheat yields by 20%; for rice, GM resulted in 22% increase compared to 17% in WS amended SW irrigated plots. Combined application of gypsum and organic materials did not increase the yields further particularly in the case of FYM and GM treated plots. This long-term study proves that organic materials alone can be used to solubilize Ca from inherent and precipitated CaCO₃ in calcareous soils for achieving sustainable yields in sodic water irrigated rice-wheat grown in annual rotation. The results can help reduce the dependency on gypsum in sodic water irrigated calcareous soils.     

Nitrogen efficiency in long-term wheat–maize cropping systems under diverse field sites in China

Efficiency of fertilizer N is becoming increasingly important in modern agricultural production owing to increasing food requirement and growing concern about environments. However, there is almost no study regarding its long-term efficiency in wheat and maize cropping systems. Long-term (15 years) experiments involving wheat (Triticum aestivum L.) and maize (Zea mays L.) rotations at five field sites with various soil and climate characteristics in China were used to determine the nitrogen (N) efficiency, including the physiological efficiency, recovery efficiency and N mass balance of soil–plant systems in response to different fertilization treatments. The present study consisted of nine treatments: unfertilized, N, phosphorus, potassium, straw and manure or their combinations. The contribution of N fertilizers to wheat yield was higher than to maize and suggested that wheat could be given priority over maize when determining N application rates. Uptake of 1 kg N produced 35.6 kg of wheat grain and 39.5 kg of maize grain. The deficit of N in soils without applied N ranged from 40 to 103 kg N ha⁻¹ year⁻¹, while N surpluses in soils with applied N fertilizers ranged from 35 to 350 kg N ha⁻¹ year⁻¹. The apparent accumulated N recovery efficiency (NRE_ac) varied widely from 4% to 90%: unbalanced fertilization and other soil limiting factors (such as aluminium toxicity) were associated with low NRE_ac. In the treatments of combination of N, phosphorus and potassium with normal application rates, the average of NRE_ac in four out of five sites reached 80%, which suggested that best management of N fertilizers could recover most of N fertilizers applied to soils. The results will be helpful to understand the long-term fate of N fertilizers and to optimize the N fertilization for agricultural practices and environment protection.     

Effects of transition season management on soil N dynamics and system N balances in rice–wheat rotations of Nepal

In the low-input rice–wheat production systems of Nepal, the N nutrition of both crops is largely based on the supply from soil pools. Declining yield trends call for management interventions aiming at the avoidance of native soil N losses. A field study was conducted at two sites in the lowland and the upper mid-hills of Nepal with contrasting temperature regimes and durations of the dry-to-wet season transition period between the harvest of wheat and the transplanting of lowland rice. Technical options included the return of the straw of the preceding wheat crop, the cultivation of short-cycled crops during the transition season, and combinations of both. Dynamics of soil N_min, nitrate leaching, nitrous oxide emissions, and crop N uptake were studied throughout the year between 2004 and 2005 and partial N balances of the cropping systems were established. In the traditional system (bare fallow between wheat and rice) a large accumulation of soil nitrate N and its subsequent disappearance upon soil saturation occurred during the transition season. This nitrate loss was associated with nitrate leaching (6.3 and 12.8 kg ha⁻¹ at the low and high altitude sites, respectively) and peaks of nitrous oxide emissions (120 and 480 mg m⁻² h⁻¹ at the low and high altitude sites, respectively). Incorporation of wheat straw at 3 Mg ha⁻¹ and/or cultivation of a nitrate catch crop during the transition season significantly reduced the build up of soil nitrate and subsequent N losses at the low altitude site. At the high altitude site, cumulative grain yields increased from 2.35 Mg ha⁻¹ with bare fallow during the transition season to 3.44 Mg ha⁻¹ when wheat straw was incorporated. At the low altitude site, the cumulative yield significantly increased from 2.85 Mg ha⁻¹ (bare fallow) to between 3.63 and 6.63 Mg ha⁻¹, depending on the transition season option applied. Irrespective of the site and the land use option applied during the transition season, systems N balances remained largely negative, ranging from −37 to −84 kg N ha⁻¹. We conclude that despite reduced N losses and increased grain yields the proposed options need to be complemented with additional N inputs to sustain long-term productivity.     

Short rotation willow coppice biomass as an industrial and energy feedstock

In order to increase the yield of short rotation willow coppice cultivated on agricultural land and to improve the biomass quality as an industrial and energy feedstock, particular consideration should be devoted to proper location and to the cultivation of woody plants. This paper presents the yield of five new cultivars of willow coppice and the relationship between the chemical composition of biomass and the plant harvest cycle. The Tur cultivar has been shown to have the highest mean productivity of 21.5 t of d.m. ha⁻¹ year⁻¹. In a three-year harvest cycle, the cultivar also gave biomass with the highest cellulose:lignin ratio (2.14). The significantly highest yield of dry biomass from the cultivars under study (20.5 t of d.m. ha⁻¹ year⁻¹) was achieved in a three-year harvest cycle. It was lower by 3.4% on average in a two-year harvest cycle and lower by 17.2% in a one-year harvest cycle as compared to a three-year cycle. As the harvest cycle was extended, the biomass quality in terms of its chemical composition improved. The biomass obtained in a three-year cycle contained the highest amount of cellulose (44.6% of d.m.) and the lowest amount of lignin (21.8% of d.m.). The results indicate that the agrotechnical factors, including the cultivar and the harvest cycle, affect not only the yield, but also the qualitative features of short rotation coppice willow biomass.     

A comprehensive study of plant density consequences on nitrogen uptake dynamics of maize plants from vegetative to reproductive stages

Nitrogen (N) use efficiency (NUE), defined as grain produced per unit of fertilizer N applied, is difficult to predict for specific maize (Zea mays L.) genotypes and environments because of possible significant interactions between different management practices (e.g., plant density and N fertilization rate or timing). The main research objective of this study was to utilize a quantitative framework to better understand the physiological mechanisms that govern N dynamics in maize plants at varying plant densities and N rates. Paired near-isogenic hybrids [i.e., with/without transgenic corn rootworm (Diabrotica sp.) resistance] were grown at two locations to investigate the individual and interacting effects of plant density (low—54,000; medium—79,000; and high—104,000 pl ha⁻¹) and sidedress N fertilization rate (low—0; medium—165; and high—330 kg N ha⁻¹) on maize NUE and associated physiological responses. Total aboveground biomass (per unit area basis) was fractionated and both dry matter and N uptake were measured at four developmental stages (V14, R1, R3 and R6). Both plant density and N rate affected growth parameters and grain yield in this study, but hybrid effects were negligible. As expected, total aboveground biomass and N content were highly correlated at the V14 stage. However, biomass gain was not the only factor driving vegetative N uptake, for although N-fertilized maize exhibited higher shoot N concentrations than N-unfertilized maize, the former and latter had similar total aboveground biomass at V14. At the R1 stage, both plant density and N rate strongly impacted the ratio of total aboveground N content to green leaf area index (LAI), with the ratio declining with increases in plant density and decreases in N rate. Higher plant densities substantially increased pre-silking N uptake, but had relatively minor impact on post-silking N uptake for hybrids at both locations. Treatment differences for grain yield were more strongly associated with differences in R6 total biomass than in harvest index (HI) (for which values never exceeded 0.54). Total aboveground biomass accumulated between R1 and R6 rose with increasing plant density and N rate, a phenomenon that was positively associated with greater crop growth rate (CGR) and nitrogen uptake rate (NUR) during the critical period bracketing silking. Average NUE was similar at both locations. Higher plant densities increased NUE for both medium and high N rates, but only when plant density positively influenced both the N recovery efficiency (NRE) and N internal efficiency (NIE) of maize plants. Thus plant density-driven increases in N uptake by shoot and/or ear components were not enough, by themselves, to increase NUE.     

Ecophysiological determinants of biomass and grain yield of wheat under P deficiency

Grain yield of crops can be expressed as a function of the intercepted radiation, the radiation use efficiency and the partitioning of above-ground biomass to grain yield (harvest index). When a wheat crop is grown under P deficiency the grain yield is reduced but it is not clear how these three components are affected. Our aim was (i) to identify which of these components were affected in spring bread wheat under P deficiency at field conditions and (ii) to relate the grain yield responses to processes of grain yield formation during the spike growth period. Three field experiments were conducted in the potentially high wheat yielding environment of southern Chile. All experiments had two levels of P availability: with (155 kg P ha⁻¹) or without P fertilization (average soil P-Olsen concentration of 10 ppm, a medium level of P availability). High wheat grain yields were obtained varying between 815 and 1222 g m⁻² with P applications. Experiments showed a grain yield reduction caused by P deficiencies of 35, 16 and 18% in experiments 1, 2 and 3, respectively. This was related (R² = 0.99, P < 0.01) to a reduction in the total above-ground biomass at harvest and not to the harvest index. Reductions in above-ground biomass were due to a reduction in radiation intercepted under P deficiency without effecting radiation use efficiency. Grain number per square meter was the main yield component (R² = 0.99, P < 0.01) that explained the grain yield reduction caused by the P deficiency which was due to low spike biomass at anthesis (R² = 0.96, P < 0.05). The reduction in spike biomass at anthesis was related (R² = 0.86, P < 0.01) to reductions in crop growth rate during the spike growth period as a consequence of a lower radiation intercepted during this period. This study showed that under high wheat yield conditions the main effect of a P deficiency on grain yield reduction was a negative impact on the total above-ground biomass due to the negative impact on intercepted radiation, particularly during the spike growth period, affecting negatively spike biomass at anthesis and consequently grain number and yield.     

Clover cover crops under-sown in winter wheat increase yield of subsequent spring barley—Effect of N dose and companion grass

Four two-year field trials, arranged in randomised split-plots, were carried out in southern Sweden with the aim of determining whether reduced N fertiliser dose in winter wheat production with spring under-sown clover cover crops, with or without perennial ryegrass in the seed mixture, would increase the clover biomass and hence the benefits of the cover crops in terms of the effect on the wheat crop, on a subsequent barley crop and on the risk of N leaching. Four doses of nitrogen (0, 60, 120 or 180 kg N ha⁻¹) constituted the main plots and six cover crop treatments the sub-plots. The cover crop treatments were red clover (Trifolium pratense L.), white clover (Trifolium repens L.) and perennial ryegrass (Lolium perenne L.) in pure stands and in mixtures. The winter wheat (Triticum aestivum L.) was harvested in August and the cover crops were ploughed under in November. The risk of N leaching was assessed in November by measuring the content of mineral N in the soil profile (0–30, 30–90 cm). In the following year, the residual effects of the cover crops were investigated in spring barley (Hordeum distichon L.) without additional N. Under-sowing of cover crops did not influence wheat yield, while reduced N fertiliser dose decreased yield and increased the clover content of the cover crops. When N was applied, the mixed cover crops were as effective in depleting soil mineral nitrogen as a pure ryegrass cover crop, while pure clover was less efficient. The clover content at wheat harvest as well as the amount of N incorporated with the cover crops had a positive correlation with barley yield. Spring barley in the unfertilised treatments yielded, on average, 1.9–2.4 Mg DM ha⁻¹ more in treatments with clover cover crops than in the treatment without cover crops. However, this positive effect decreased as the N dose to the preceding wheat crop increased, particularly when the clover was mixed with grass.     

Management and cultivar effects on ruminant nutritional quality of pearl millet (Pennisetum glaucum (L.) R. Br.) stover: II. Effects of cultivar choice on stover quality and productivity

The paper investigates the variation in laboratory fodder quality traits in stover of 16 cultivars of pearl millet grown over 2 consecutive years and subjected to two different fertilizer regimes and planting densities. Stover quality traits were nitrogen and sugar content, in vitro digestibility and metabolizable energy content as well as yield of digestible and metabolizable stover. Significant (P < 0.05) cultivar-dependent variations were observed for all these quality traits. Stover nitrogen contents were mostly below the levels (1.2% of dry matter) considered to be the minimum required for efficient feed digestion in the rumen, but choice of cultivar plus nitrogen fertilizer application could raise nitrogen levels to near, equal or above this threshold. Stover sugar contents were below 5% and mostly concentrated in the stems. Across management regimes stover in vitro digestibility varied by about 4% units, and by about 3–5% units within individual management regimes. Stover metabolizable energy contents of cultivars varied such that stover from superior cultivars could provide the energy maintenance requirement of livestock and theoretically moderate levels of live weight gains, while livestock fed on stover from poor cultivars would lose live weight. Yields of digestible and metabolizable stover (yield of stover dry matter times stover in vitro digestibility/metabolizable energy) varied among cultivars by at least 1.7-fold. Stover quality traits and grain yields of cultivars were largely unrelated (P > 0.05) suggesting that high stover quality will not be achieved on the expense of grain yield. Heritabilities for stover quality traits were high (h² > 0.73) except for stover nitrogen content (h² > 0.56).     

Improving crop yield and N uptake with long-term straw retention in two contrasting soil types

Retention and/or reincorporation of plant residues increases soil organic nitrogen (N) levels over the long-term is associated with increased crop yields. There is still uncertainty, however, about the interaction between crop residue (straw) retention and N fertilizer rates and sources. The objective of the study was to assess the influence of straw management (straw removed [S_Rem] and straw retained [S_Ret]), N fertilizer rate (0, 25, 50 and 75 kg N ha⁻¹) and N source (urea and polymer-coated urea [called ESN]) under conventional tillage on seed yield, straw yield, total N uptake in seed + straw and N balance sheet. Field experiments with barley monoculture (1983-1996), and wheat/barley-canola-triticale-pea rotation (1997-2009) were conducted on two contrasting soil types (Gray Luvisol [Typic Haplocryalf] loam soil at Breton; Black Chernozem [Albic Argicryoll] silty clay loam at Ellerslie) in north-central Alberta, Canada. On the average, S_Ret produced greater seed yield (by 205-220 kg ha⁻¹), straw yield (by 154-160 kg ha⁻¹) and total N uptake in seed + straw (by 5.2 kg N ha⁻¹) than S_Rem in almost all cases in both periods at Ellerslie, and only in the 1997-2009 period at Breton (by 102 kg seed ha⁻¹, 196 kg straw ha⁻¹ and by 3.7 kg N ha⁻¹) for both N sources. There was generally a considerable increase in seed yield, straw yield and total N uptake in seed + straw from applied N up to 75 kg N ha⁻¹ rate for both N sources at both sites and more so at Breton, but the response to applied N decreased with increasing N rate. The ESN was superior to urea in increasing seed yield (by 109 kg ha⁻¹), straw yield (by 80 kg ha⁻¹) and total N uptake in seed + straw (by 2.4 kg N ha⁻¹) in the 1983-1996 period at Breton (mainly at the 25 and 50 kg N ha⁻¹ rates). But, urea produced greater straw yield (by 95 kg ha⁻¹) and total N uptake in seed + straw (by 3.3 kg N ha⁻¹) than ESN in the 1983-1996 period at Ellerslie. The N balance sheets over the 1983-2009 study duration indicated large amounts of applied N unaccounted for (ranged from 740 to 1518 kg N ha⁻¹ at Breton and from 696 to 1334 kg N ha⁻¹ at Ellerslie), suggesting a great potential for N loss from the soil-plant system through denitrification and/or nitrate leaching, and from the soil mineral N pool by N immobilization. In conclusion, the findings suggest that long-term retention of crop residue may gradually improve soil productivity. The effectiveness of N source varied with soil type.     

The effect of row spacing and seeding rate on biomass production and plant stand characteristics of non-irrigated photoperiod-sensitive sorghum (Sorghum bicolor (L.) Moench)

To evaluate row spacing and seeding rate effects on yield and plant stand characteristics of high-biomass sorghum, a photoperiod-sensitive cultivar was sown at three different row spacings (76, 38, and 19 cm) and seeding rates (218,000, 306,000, and 393,000 seeds ha⁻¹ for one site-year and 116,000, 204,000, and 291,000 seeds ha⁻¹ for three site-years) from 2009 to 2010 in Alabama and Arkansas, USA. Measurements included above-ground dry matter production, plant height, stem density, and stem diameter. Narrower row spacing (i.e. 19 cm) produced the highest biomass for all site-years. Increasing seeding rate did not affect yield for three of the site-years, and decreased yield for one. The 19 cm row spacing produced the highest stem densities. Plant height increased with increasing seeding rates at one site and decreased with higher seeding rates at another site. At one location, stem diameter declined as seeding rates and stem density increased. It was concluded that narrower row spacing (19 cm) provides the maximum yield benefit by significantly increasing stem density, and low seeding rates (116,000 seeds ha⁻¹) are preferable because higher seeding rates do not positively affect yield and may cause morphological changes (i.e. taller plants with thinner stems) conducive to lodging.     

Uptake and use efficiency of N, P, K, Ca and Al by Al-sensitive and Al-tolerant cultivars of wheat under a wide range of soil Al concentrations

The impacts of acidic soils and Al toxicity on wheat nutrient economy have been scarcely researched under field conditions even though these soils are widely spread in wheat production areas around the world. The main objective of this study was to quantitatively evaluate the element (N, P, K, Ca and Al) economy of an Al-sensitive and an Al-tolerant wheat cultivar growing under different soil Al concentrations at field conditions. To reach this objective, two field experiments were conducted in an Andisol in Valdivia (39°47′18″S, 73°14′05″W), Chile. Treatments were a factorial arrangement of: (i) two spring wheat cultivars (Al-sensitive, Domo.INIA and Al-tolerant, Dalcahue.INIA) and (ii) five exchangeable Al levels (0-2.7 cmol₍₊₎ kg⁻¹) with three replicates. At harvest, plant biomass was sampled and divided into 5 organ categories: ears, grains, blade leaves, stems plus sheath leaves and roots. The element content (N, P, K, Ca and Al) in each organ was measured to quantify element uptake and concentration, nutrient uptake efficiency (UPE) and nutrient utilization efficiency (UTE). Element uptake (N, P, K, Ca, and Al) was negatively affected by the increased soil Al concentration in above-ground and root biomass in both cultivars (R² = 0.61-0.98, p < 0.01), although clear differences were found between cultivars. On the contrary, the impact of soil exchangeable Al on the plant element concentration was minor, showing weak associations with soil Al levels. However, the Al concentration in above-ground tissues of the Al-sensitive cultivar was an exception because it increased exponentially with the Al soil concentration (R² = 0.96-0.99, p < 0.001). Nutrient uptake efficiencies, UPEs (N, P, K and Ca), were negatively affected by soil Al concentrations and were well described by linear equations in both cultivars (R² = 0.58-0.98, p < 0.05), with notable differences between them. Both nutrient uptake (capture) and UPE were the traits that best explained above-ground biomass production (R² = 0.82-0.99, p < 0.001, n = 20). Nutrient utilization efficiency, UTEs (N, P, K and Ca) responded more conservatively to the soil Al concentration, except for the Al sensitive cultivar under very high soil Al levels.     

Radiation use efficiency,N accumulation and biomass production of high-yielding rice in aerobic culture

The concept of aerobic culture is to save water resource while maintaining high productivity in irrigated rice ecosystem. This study compared nitrogen (N) accumulation and radiation use efficiency (RUE) in the biomass production of rice crops in aerobic and flooded cultures. The total water input was 800–1300 mm and 1500–3500 mm in aerobic culture and flooded culture, respectively, and four high-yielding rice cultivars were grown with a high rate of N application (180 kg N ha⁻¹) at two sites (Tokyo and Osaka) in Japan in 2007 and 2008. The aboveground biomass and N accumulation at maturity were significantly higher in aerobic culture (17.2–18.5 t ha⁻¹ and 194–233  kg N ha⁻¹, respectively) than in flooded culture (14.7–15.8 t ha⁻¹ and 142–173 kg N ha⁻¹) except in Tokyo in 2007, where the surface soil moisture content frequently declined. The crop maintained higher N uptake in aerobic culture than in flooded culture, because in aerobic culture there was a higher N accumulation rate in the reproductive stage. RUE in aerobic culture was comparable to, or higher than, that in flooded culture (1.27–1.50 g MJ⁻¹ vs. 1.20–1.37 g MJ⁻¹), except in Tokyo in 2007 (1.30 g MJ⁻¹ vs. 1.37 g MJ⁻¹). These results suggest that higher biomass production in aerobic culture was attributable to greater N accumulation, leading to higher N concentration (N%) than in flooded culture. Cultivar differences in response to water regimes were thought to reflect differences in mainly (1) early vigor and RUE under temporary declines in soil moisture in aerobic culture and (2) the ability to maintain high N% in flooded culture.