Yield traits of six clones of Miscanthus in the first 3 years following planting in Poland

Miscanthus species are highly productive with low inputs and are excellent candidates for bioenergy feedstock production. A field experiment was conducted to characterize phenotypic differences in selected clones generated from interspecific hybrids of Miscanthus sinensis × Miscanthus sacchariflorus and intraspecific hybrids within M. sinensis. The field experiment was planted in plots of 20 m² at a density of 1 plant m⁻² in three randomized blocks. The trial was monitored for 3 years for traits important to biomass production including plant height, tiller density, tuft diameter and shoot diameter. ANOVA showed significant genotypic variation in these traits once the stand was 2 years old. This study shows that tillering and tuft diameter in years 1 and 2 are the most important traits influencing biomass yield, but over 3 years when the highest yielding potential is reached, tillering and tuft diameter have the highest correlation with biomass yield. These results identifying high-yielding Miscanthus clones will be utilized in our plant improvement program.     

Combining ability analysis to identify suitable parents for heterosis in seed cotton yield,its components and lint % in upland cotton

Combining ability and heterosis were studied in a 6 × 6 diallel cross to see the nature of gene action in Upland cotton (Gossypium hirsutum L.) during 2002 to 2004. Analysis of variance revealed highly significant differences among all the F₁ and F₂ hybrid means and their respective six parental values for all the traits examined. In both generations, the mean squares due to general combining ability (GCA) and specific combining ability (SCA) were also highly significant. SCA genetic variances were greater than GCA and more important for the traits, i.e. boll weight, boll number and seed cotton yield per plant, showing the predominance of non-additive gene action. Lint % in both generations and boll weight in F₂s only were controlled by additive type of gene action due to maximum GCA variances. Cultivar CIM-1100 was found to be the best general combiner and its utilization produced valuable hybrids with desirable SCA in both generations. F₁ and F₂ hybrids, viz., CIM-1100 × CRIS-9, CIM-1100 × FH-682, CIM-1100 × BH-36 and CIM-109 × CIM-1100 as high × low and low × high parents performed well in SCA determination, outstanding mean performance and heterosis. Better SCA effects associated with useful heterosis were more pronounced for yield traits. In F₁ hybrids, maximum heterosis was observed for seed cotton yield followed by boll number, boll weight and lint %. The heterosis over better parent was +3.13 to +65.63% for bolls per plant, +0.75 to +24.40% for boll weight, +0.82 to +115.22% for seed cotton yield and +0.27 to +3.88% for lint %. Involvement of CIM-1100 in most of the F₁ and F₂ hybrids resulted in the synthesis of superior genotypes for most of the traits studied. Inbreeding depression was elevated in good performing hybrids and was the highest for seed cotton yield. Highest yielding F₁ hybrids yielded lesser in the subsequent generation due to over-dominance and inbreeding depression, whereas moderate yielding F₁ hybrids were found more stable even passing through process of segregation due to additive gene action. The combined performance of F₁ and F₂ hybrids could be a good indicator to identify the most promising populations to be utilized either as F₂ hybrids or as a resource population for further selection.     

Weed control in a pigeon pea–wheat cropping system

Pigeon pea (Cajanus cajan (L.) Millsp.) seedlings compete poorly against the rapid growth of warm-season annual weeds. Weed control is required before this heat and drought-tolerant legume can be reliably grown in the U.S. southern Great Plains as a potential source of livestock hay between annual plantings of winter wheat (Triticum aestivum L.). Currently, no herbicides are labeled for use on pigeon pea grown in the U.S. Three years of replicated field experiments were conducted to determine the effects of applications (1× and 2× rates) of herbicides (pre-emergence, sulfentrazone + chlorimuron and metribuzin; post-emergence, imazapic and sethoxydim) on weed suppression, pigeon pea dry matter, and carry-over effects on a winter wheat crop. The most abundant summer weeds were broadleaf, and all herbicide treatments, except sethoxydim (grass herbicide), reduced weed densities compared to untreated plots without adversely affecting pigeon pea stands. Imazapic treatments provided the most effective weed control. Overall average pigeon pea dry matter ranged from 75 to 256 g m⁻² with sethoxydim and the untreated control ≤ metribuzin ≤ sulfentrazone + chlorimuron ≤ hand weeded control ≤ imazapic. Compared to the hand-weeded control, imazapic treatments greatly reduced wheat dry matter (1×, 65% and 2×, 91%) and grain yield (1×, 59% and 2×, 93%). Imazapic should not be used unless nontransgenic imidazolinone herbicide tolerant wheat cultivars are planted. While the other herbicides decreased negative effects of weeds on pigeon pea dry matter without greatly affecting productivity of a following wheat crop, appropriate labels for each of these herbicides will be required prior to their use by southern Great Plains pigeon pea producers.     

Maximizing yields in rice–groundnut cropping sequence through integrated nutrient management

Integrated use of organic and inorganic fertilizers can improve crop productivity and sustain soil health and fertility. The present research was conducted to study the effects of application of green manures [sesbania (Sesbania aculeate Poiret) and crotalaria (Crotalaria juncea L.)] and farmyard manure on productivity of rice (Oryza sativa L.) and its residual effects on subsequent groundnut (Arachis hypogaea L.) crop. Rice and groundnut crops were grown in sequence during rainy and post-rainy seasons with and without green manure in combination with different fertilizer and spacing treatments under irrigated conditions. The results showed that application of green manures sesbania and crotalaria at 10 t ha⁻¹ to rice compared to no green manure application significantly increased grain yield of rice by 1.6 and 1.1 t ha⁻¹, and pod yields of groundnut crop succeeding rice by 0.25 and 0.16 t ha⁻¹, respectively. There was no significant difference between the application of crotalaria or farmyard manure at 10 t ha⁻¹ on grain yields of rice, but pod yields of subsequent groundnut crop were greater with application of green manure. There was no significant effect of different spacing 20×15,15×15,15×10 cm² (333 000; 444 000; 666 000 plant ha⁻¹, respectively) on grain yield of rice. Pod yields of groundnut were significantly greater with closer spacing 15×15 cm² (444 000 plants ha⁻¹) as compared to spacing of 30×10 cm² (333 000 plants ha⁻¹). Maximum grain of rice was obtained by application of 120:26:37 kg NPK ha⁻¹ in combination with green manures, whereas maximum pod yield of groundnut was obtained by residual effect of green manure applied to rice and application of 30:26:33 kg NPK ha⁻¹ in combination with gypsum applied to groundnut crop.     

Variation in grain quality of pearl millet from Sahelian West Africa

Agricultural intensification through the application of mineral fertilizers, the recycling of crop residues and animal manures and through plant breeding are the only means to increase food supply in the poverty ridden West African Sahel, where pearl millet (Pennisetum glaucum (L.) R. Br.) is the dominant staple. Research on the effects of soil amendments on the quality of millet straw and grain is scarce, comparative studies of possible quality differences in traditional landraces versus improved varieties and hybrids are lacking. This paper reports results from 22 landrace populations, 22 improved varieties, six inbred×variety hybrids (IVHs, fertile inbred×open-pollinated varieties) and four topcross hybrids (TCHs, male-sterile line×open-pollinated varieties), whose grains were analyzed for protein concentration and amino acid composition, macro- and micronutrients (total and phytate P, K, Ca, Mg, Zn, Cu), metabolizable energy (ME), fat and β-carotene. At similar yield levels, landraces showed a 2.9 and 3.5% higher protein concentration compared with improved varieties and hybrids without a detrimental effect on protein quality as determined by the relative amount of lysine and threonine. Landrace populations also had the highest fat concentrations and the largest micronutrient densities. However, in-vitro digestibility and ME were (79.8% and 12.2 MJ kg⁻¹ respectively) larger for both groups of hybrids. The concentration of β-carotene was (0.13 μmol kg⁻¹) highest in the improved varieties, but appeared overall too low to significantly contribute to vitamin A nutrition in local diets. While the results of this genotype screening need to be verified in replicated multi-location trial studies, they underline the potential of including landraces in breeding programs to concurrently improve grain yield and grain quality in this area of the world.     

Analysis of QTLs for seed low temperature germinability and anoxia germinability in rice (Oryza sativa L.)

Direct seeding instead of transplanting for rice (Oryza sativa L.) has increasingly been used in northern and eastern China because of labor and cost saving. However, poor germinability is still one of the major problems faced in the adoption of direct seeding under low temperature (low temperature germinability: LTG) and anoxia (anoxia germinability: AG) condition. To gain an understanding of the genetic control of seed germinability under these unfavourable conditions, two rice lines, USSR5 (japonica type) and N22 (indica type) and F₂ individuals derived from the cross USSR5 × N22 were tested for LTG and AG. USSR5 and N22 differ significantly for both LTG and AG. The LTG of the F₂ individuals ranged from 0 to 100% after a 10 days incubation. AG ranged from 0.0 to 4.0 cm shoot length. Based on segregation in the F₂ population, a linkage map was constructed using 121 SSR markers. The map covered 1821.5 cM, with a mean inter-marker distance of 16.7 cM. Eleven putative QTLs for LTG were detected, one on each of chromosomes 3–5, 7, 9–11, and four on chromosome 5. The USSR5 alleles in all these QTLs acted to increase LTG. Two QTLs for AG were located on chromosomes 5 and 11, respectively, at both of which the USSR5 alleles acted to increase AG. We propose that USSR5 could make a major contribution to improving LTG and AG in rice breeding programs.     

Plant population density,row spacing and hybrid effects on maize canopy architecture and light attenuation

Light attenuation within a row crop such as maize is influenced by canopy architecture, which has to be defined in terms of the size, shape and orientation of shoot components. Cultural practices that improve the efficiency of light interception affect canopy architecture by modifying such components. Our objectives were to: (i) determine the nature and timing of leaf growth responses to plant population and row spacing; (ii) analyze light attenuation within fully developed maize canopies. Field experiments were conducted at Pergamino (33°56′S, 60°34′W) and Salto (34°33′S, 60°33′W), Argentina, during 1996/1997 and 1997/1998 on silty clay loam soils (Typic Argiudoll) that were well watered and fertilized. Four maize hybrids of contrasting plant type were grown at three plant populations (3, 9 and 12 plants m⁻²) and two row spacings (0.35 and 0.70 m). Plant population promoted larger changes in shoot organs than did row spacing. As from early stages of crop growth, leaf growth (V₆–V₈) and azimuthal orientation (V₁₀–V₁₁) were markedly affected by treatments. Modifications in shoot size and leaf orientation suggest shade avoidance reactions, probably triggered by a reduction in the red:far-red ratio of light within the canopy. An interaction between hybrid and plant rectangularity on leaf azimuthal distribution was determined, with one hybrid displaying a random azimuthal leaf distribution under most conditions. This type of hybrid was defined as rigid. The other hybrids showed modified azimuthal distribution of leaves in response to plant rectangularity, even at very low plant populations. These hybrids were defined as plastic. Once maximum leaf area index (LAI) was attained light attenuation did not vary among hybrids and row spacing for plant populations ≥9 plants m⁻² (k coefficient: 0.55 and 0.65 for 9 and 12 plants m⁻², respectively). A more uniform plant distribution increased light attenuation (k coefficient: 0.37–0.49) only when crop canopies did not reach the critical LAI.     

Intra-specific competition in maize: early establishment of hierarchies among plants affects final kernel set

Reduced plant biomass and increased plant-to-plant variability are expected responses to crowding in monocultures, but the underlying processes that control the onset of interplant interference and the establishment of hierarchies among plants within a stand are poorly understood. We tested the hypothesis that early determined plant types (i.e. dominant and dominated individuals) are the cause of the large variability in final kernel number per plant (KNP) usually observed at low values of plant growth rate (PGR) around silking in maize (Zea mays L.). Two hybrids (DK696 and Exp980) of contrasting response to crowding were cropped at different stand densities (6, 9 and 12 plants m⁻²), row spacings (0.35 and 0.70 m), and water regimes (rainfed and irrigated) during 1999/2000 and 2001/2002 in Argentina. The onset of interplant competition started very early during the cycle, and significant differences (P<0.05) in estimated plant biomass between stand densities were detected as soon as V_4–6 (DK696) and V_6–7 (Exp980). Plant population and row spacing treatments did not modify the onset of the hierarchical growth among plants, but did affect (P<0.02–0.08) the dynamic of the process. For both hybrids, the rate of change in relative growth between plant types was larger at 9 and 12 plants m⁻² (ca. 0.12 g/g per 100 °C day) than at 6 plants m⁻² (ca. 0.07 g/g per 100 °C day). For all treatments, the largest difference in estimated shoot biomass between plant types took place between 350 (V₇) and 750 °C day (V₁₃) from sowing, and remained constant from V₁₃ onwards. Dominant plants always had more kernels per plant (P<0.05) than the dominated ones, but differences between plant types in PGR around silking were significant (P<0.05) only at 12 plants m⁻². Our research confirmed the significant (P<0.01) curvilinear response of KNP to PGR around silking, but also determined a differential response between plant types: the mean of residual values were significantly (P<0.01) larger for dominant than for dominated individuals. Estimated ear biomass at the onset of active kernel growth (R₃) reflected the variation in KNP (r²≥0.62), and was significantly (P<0.01) related to estimated plant biomass at the start of active ear growth (ca. V₁₃). This response suggested that the physiological state of each plant at the beginning of the critical period had conditioned its reproductive fate. This early effect of plant type on final KNP seemed to be exerted through current assimilate partitioning during the critical period.     

Long-term effect of tillage systems on soil microbiological,chemical and physical parameters and the incidence of charcoal rot by Macrophomina phaseolina (Tassi) Goid in soybean

A 20-year field experiment was employed with the aim of evaluating the effect of tillage systems on biological, chemical and physical aspects of the soil, and to establish whether there was a correlation of these parameters with the incidence of charcoal rot (Macrophomina phaseolina) of soybean and crop yield. The tillage systems evaluated were direct seeding (DS), DS + scarifier (DS + S), minimum tillage (MT) and conventional tillage (CT). DS presented higher values than CT in culturable total fungi (26.33 × 10⁵ vs. 2.33 × 10⁵ CFU g⁻¹ dry soil), total bacteria (182 × 10⁷ vs. 64 × 10⁷ CFU g⁻¹ dry soil), microbial respiration (0.77 mg CO₂ g⁻¹ week⁻¹ vs. 0.45 mg CO₂ g⁻¹ week⁻¹) and fluorescein diacetate (FDA) hydrolysis (4.17 ug fluorescein g⁻¹ h⁻¹ vs. 1.70 ug fluorescein g⁻¹ h⁻¹ in CT. Fungal and bacterial community fingerprints, by terminal restriction fragment length polymorphism (T-RFLP) analysis, of Intergenic spacer regions of rRNA and 16S rRNA genes, respectively, were influenced by the tillage system. Also FAME (fatty acid methyl ester) profiles showed that microbial community structure in DS and CT was clearly different. DS samples contained significantly higher total microbial biomass than the other tillage treatments, but there were no significant differences in fungal biomass or any consistent trend with respect to stress index. Our results showed that microbial communities were more abundant and active in DS than in CT in response to high nutrient content in soil. Indeed, DS systems presented higher soil OM, total N, K and Ca than CT. Electrical conductivity and aggregate stability (AS) were also improved by DS. Soybean grown in high-quality soil was not affected by charcoal rot, however, under CT, disease incidence in soybean was 54%. These differences were correlated to the higher microbial abundance and activity under DS, the biological component being a key factor determining soil capacity to suppress the soilborne pathogen.     

Antifungal activity in vitro of Flourensia spp. extracts on Alternaria sp., Rhizoctonia solani,and Fusarium oxysporum

There are 32 species of Flourensia genus with 9 native to Mexico. These species contain compounds with potential use for pest control. In this paper, we report the antifungal activities of ethanol extracts from three endemic species in Coahuila state: Flourensia microphylla, Flourensia cernua, and Flourensia retinophylla. Also, preliminary information on the chemical composition of the extracts is included. Antifungal activity was tested against three pathogens attacking commercial crops: Alternaria sp., Rhizoctonia solani, and Fusarium oxysporum. The extracts concentration varied from 10 to 1500 μl l⁻¹. The ANOVA showed highly significant differences (P ≤ 0.01) with the extracts, the doses, and on the interaction extract × dose. Inhibition effect was observed from 10 μl l⁻¹ in all three species. Total inhibition was found only with F. cernua and F. retinophylla at 1000 μl l⁻¹ for R. solani, the three species inhibited the three pathogens at 1500 μl l⁻¹. Infrared analysis showed similar absorption signals for the extracts of the three species although in different concentration. This suggests that similar compounds may be present. The control of these pathogens by natural compounds is interesting both for environmental and economic reasons. The use of semiarid lands plants may improve the socioeconomic level of the people within the region.     

Breeding for perennial growth and fertility in an Oryza sativa/O. longistaminata population

The development of perennial cultivars (CVs) of upland rice would give farmers a new tool to reduce soil erosion from hilly fields, thereby mitigating a problem of regional concern in Southeast Asia. Oryza longistaminata is an undomesticated, perennial, rhizomatous relative of domesticated Asian rice (Oryza sativa). Using five sets of 4 × 2 factorial mating designs, we crossed rhizomatous interspecific genotypes (IGs) from an intermated O. sativa/O. longistaminata population with male-fertile IG selections from the intermated population, and with O. sativa CVs. Parents and progeny were planted in an upland field at IRRI using a randomized complete block design and evaluated for rhizome expression, survival after 1 year, vigor of the survivors, and yield. For the IG parents, rhizome expression was variable and penetrance of most genotypes was incomplete, but genotypes that demonstrated the potential for moderate rhizome expression had high penetrance (89% average). The CV parents yielded 11.0 g/plant on average but none produced rhizomes or survived 1 year. The IG parents averaged yields of 3.1 g/plant, 57% rhizomatous and 36% survival. The IG/IG progeny averaged yields of 4.2 g/plant, 32% rhizomatous and 37% survival. The IG/CV progeny averaged yields of 6.0 g/plant, 18% rhizomatous and 16% survival. Nine IG/IG progeny and six IG/CV progeny were rhizomatous, perennial, and yielded at least 5 g/plant, and five of these yielded more than 10 g/plant. For the IG parents and IG/IG progeny, rhizome presence and expression were positively associated with survival and vigor of the survivors. General combining ability effects were significant for percent survival and yield but not percent rhizomatous. Specific combining ability effects were significant for percent rhizomatous, percent survival and yield. By selecting female parents for long rhizomes and male parents for fertility, considerable gains in rhizome expression, survival and yield were made. The development of perennial upland rice CVs should be feasible via introgression of genes from O. longistaminata.     

Effects of soil water content and nitrogen supply on the productivity of Miscanthus × giganteus Greef et Deu. in a Mediterranean environment

Miscanthus × giganteus is one of the most promising biomass crops for non-food utilisation. Taking into account its area of origin (Far East), its temperature and rainfall requirements are not well satisfied in Mediterranean climate. For this purpose, a research was carried out with the aim of studying the adaptation of the species to the Mediterranean environment, and at analysing its ecophysiological and productive response to different soil water and nitrogen conditions. A split plot experimental design with three levels of irrigation (I₁, I₂ and I₃ at 25%, 50% and 100% of maximum evapotranspiration (ETm), respectively) and three levels of nitrogen fertilisation (0 kg ha⁻¹: N₀, 60 kg ha⁻¹: N₁ and 120 kg ha⁻¹: N₂ of nitrogen) were studied. The crop showed a high yield potential under well-watered conditions (up to 27 t ha⁻¹ of dry matter). M. × giganteus, in Mediterranean environment showed a high yield potential even in very limited water availability conditions (more than 14 t ha⁻¹ with a 25% ETm restoration). A responsiveness to nitrogen supply, with great yield increases when water was not limiting, was exhibited. Water use efficiency (WUE) achieved the highest values in limited soil water availability (between 4.51 and 4.83 g l⁻¹), whilst in non-limiting water conditions it decreased down to 2.56 and 3.49 g l⁻¹ (in the second and third year of experiment, respectively). Nitrogen use efficiency (NUE) decreased with the increase of water distributed (from 190.5 g g⁻¹ of I₀ to 173.2 g g⁻¹ of I₂); in relation to N fertilisation it did not change between the N fertilised treatments (N₁ and N₂), being much higher in the unfertilised control (177.1 g g⁻¹). Radiation use efficiency (NUE) progressively declined with the reduction of the N fertiliser level (1.05, 0.96 and 0.86 g d.m. MJ⁻¹, in 1994, and 0.92, 0.91 and 0.69 g d.m. MJ⁻¹, in 1995, for N₂, N₁ and N₀, respectively).     

Grain weight response to increases in number of grains in wheat in a Mediterranean area

This study explored whether the average grain weight of wheat tends to be reduced when grain number is increased due to either competition or, to a consistent increase in the relative proportion of grains of smaller weight potential. Three field experiments considering environmental, genetic and environmental × genetic effects on yield and its main components were analysed during the 2003/2004 growing season in two different locations within the Mediterranean area of Catalonia, Spain. The relationship between grain weight and number of grains per unit land area was analysed for both the average of all grains (AGW) and for grains in specific positions of the main-shoot spikes: proximal (CPg) and distal (CDg) grains of central spikelets, and proximal grains of the near apical (APg) and near basal (BPg) spikelets. The proportional contribution of grains per spike for the different grain positions and the relative contribution of spikes per m² made by the main shoot or tillers were also examined.In the three experiments, AGW was reduced when grain number was increased due to genetic and/or environmental factors. However, the slopes of the straight-lines that represented the negative relationship between grain number and grain weight were lower (less negative) and less significant for CPg (b = −0.20, P > 0.20), CDg (b = 0.06, P > 0.20) and BPg (b = −0.21, P > 0.20) than for AGW (b = −0.40, P < 0.05). The proportional contribution of distal grains and tiller spikes (both with relatively light grains) were directly related to grain number increases. Therefore, as grain number increased there was a higher proportion of grains of low potential weight. Thus, the average grain weight was concomitantly reduced when grain number increased by increasing the proportion of “small grains” in the canopy independently of any competitive relationship between growing grains.     

Thin cell suspension layer as a new methodology for somatic embryogenesis in Agave tequilana Weber cultivar azul

Commercial micropropagation of plants is enhanced with the use of liquid media cultures; however the presence of hyperhydricity is commonly observed in cultures of the succulent plant Agave tequilana Weber cultivar azul, this phenomenon persists even with the use of temporary immersion systems (TIS). Thin cell suspension layer technology is proposed to solve this problem. This technology fuses the advantages of a liquid culture made through cellular dissociation, and the use of solid medium for somatic embryogenesis expression of the species. The technology was evaluated by means of two experiments in order to know the influence of gelling agent phytagel^®, and of sucrose concentrations through interaction with three cellular suspension densities. It was clear that concentrations of phytagel at 6, 8, 10 or 12 g l^?1 are not significant for embryoid expression of A. tequilana. On the other hand, sucrose at 30 and 60 g l^?1 have statistically superior values than concentration of 120 g l^?1. A larger cellular density (161 × 10³ cells ml^?1) gave a statistical difference in number of embryoids. The advantages of thin cell suspension layer were remarkable: it encouraged complete expression of embryoids without transfer to extra media cultures, and a higher number of generated embryoid was obtained. Absence of hyperhydricity was observed in all regenerants.     

Comparison on the total phenol contents and the color of fresh and infrared dried olive leaves

The color (L*, a*, b* parameters), the total phenols content and the global chemical composition (moisture, protein, fat, carbohydrates and ash) of four fresh varieties of olive leaves (Chemlali, Chemchali, Zarrazi and Chetoui) were determined. Fresh olive leaves are characterized by a green color (greenness parameter, a*, varying from ?5.01 ± 0.26 to ?9.14 ± 1.21), an intermediate moisture content (0.85 to 1.00 g/g dry matter, i.e. 46 to 50 g/100 g fresh matter) and a variable amount of total phenols according to the olive leaf variety (from ≈2.32 to ≈1.40 g caffeic acid/100 g dry matter).Fresh leaves were submitted to blanching and/or infrared drying at 40, 50, 60 and 70 °C in order to be stabilized by reducing their moisture contents. The impact of IR drying temperature on some quality attributes (color, total phenols and moisture rate removal) was evaluated. Nevertheless, the effect of prior blanching treatment on the quality attributes of dried leaves is less significant and it depends on the olive leaf variety. The infrared drying induces a considerable moisture removal from the fresh leaves (more than 85%) and short drying durations (varying from ≈162 at 40 °C to 15 min at 70 °C). IR drying temperature showed a significant effect of on total phenols content and the color of the leaves whatever the leaf variety. In fact, total phenols content of dried olive leaves increased if compared to fresh ones. For example, total phenols of Chemlali leaves increased from 1.38 ± 0.02 (fresh leaves) to 2.13 ± 0.29 (dried at 40 °C) and to 5.14 ± 0.60 g caffeic acid/100 g dry matter (dried at 70 °C). IR drying allows preserving the greenness color of fresh leaves and enhancing their luminosity. It could be suggested for preserving olives leaves before their use in food or cosmetic applications.     

A comparison of the lipid and fatty acid profiles from the kernels of the fruit (nuts) of Ximenia caffra and Ricinodendron rautanenii from Zimbabwe

The lipid profile of nuts from Ximenia caffra and Ricinodendron rautanenii was determined and compared. Although the total oil content of X. caffra and R. rautanenii nuts was similar (47.6 ± 7.5% versus 53.3 ± 13.7%), the fatty acid profiles differed significantly. X. caffra had a higher content (p < 0.05) of saturated fatty acids than R. rautanenii (20.19 ± 1.07% versus 13.87 ± 3.68%) and contained C22:0 and C24:0 which were lacking in R. rautanenii. Total monounsaturated fatty acids were higher in X. caffra than R. rautanenii (71.48 ± 0.99% versus 36.66 ± 1.95%). Oleic acid (C18:1n9) was the major monounsaturated fatty acid (MUFA) in X. caffra whereas erucic acid (C22:1n9), the major MUFA in R. rautanenii, was undetectable in X. caffra. R. rautanenii had a greater polyunsaturated fatty acid content than X. caffra which contained C18:3n3 (α-linolenic acid) and nervonic acid (24:1n9). X. caffra is potentially an important source of essential fatty acids.     

Interannual variation in soybean yield: interaction among rainfall,soil depth and crop management

Using data from large, grower-managed fields we investigated the variation in yield of dryland soybean in an area with low and variable summer rainfall, and soils that are variable in depth and poor in phosphorus (P). First, using data from unfertilised, wide-row (0.7 m) crops grown under standard management between 1989 and 1992 (Series 1), we quantified the relationship between yield and W, a rainfall-based estimate of water availability during the period of pod and grain set. Separate functions were established for deep (depth ≥ 1 m) and shallow soils (0.75 m ≥ depth ≥ 0.5 m). Second, we partially tested these functions using two independent data sets (Series 2 and 3). Third, we evaluated the effects on yield of large (18 kg P ha⁻¹, Series 4) or moderate doses of P fertiliser (8–12 kg P ha⁻¹) in narrow-row crops (0.35 m, Series 5). To investigate water × management interaction we (i) calculated ΔY, the difference between actual yield in Series 4 and 5 and yield calculated with the functions derived from Series 1, and (ii) tested the association between ΔY and actual W. In a set of 24 crops (Series 1), yield varied between 2.1 and 3.1 t ha⁻¹ in deep soils and between 1.3 and 2.6 t ha⁻¹ in shallow soils; non-linear functions described fairly well, the response of yield to W. Fertilisation with 18 kg P ha⁻¹ increased yield by 0.6 t ha⁻¹ irrespective of water availability. The combination of narrow rows and a moderate dose of fertiliser increased yield in 73% of crops in deep soil but only in 53% of crops in shallow soil. There was a positive association between ΔY and W in deep soil but no relationship between these variables in shallow soil. Yield responses to management were thus differentially affected by rainfall in deep and shallow soils.     

The influence of rainfed and limited irrigation conditions and early vs. late plantings on kenaf as a potential industrial crop in the southern High Plains,USA

Kenaf (Hibiscus cannabinus L.) is a nonwoody fiber source with many uses. To evaluate the dry matter yield potential of kenaf at two locations in the southern High Plains of the USA and the effects of late planting/late emergence as a possible replacement for hail damaged cotton, four varieties were grown in 2004 and 2005 at New Mexico State University's Agricultural Science Centers at Clovis, under limited irrigation, and Tucumcari, under rainfed conditions. Each study was a randomized complete block design having four replicates. A year × location interaction existed (P < 0.0469) for kenaf yield largely due to precipitation amount and distribution. Either late planting or late emergence due to low soil moisture at planting significantly reduced yields (3.62 vs. 0.63 Mg ha^?1 for mid-May planting and emergence and early July emergence or planting, respectively, P < 0.0001). Consequently, kenaf would not be suitable for recovering input costs when planted after failure of cotton. The very late maturing variety Gregg had consistently lower numeric yields than Dowling, Everglades 41, and Tainung 2 in all comparisons, with the strongest trend within the emergence date comparison (P < 0.0912). Kenaf varieties should be selected for any location that finish blooming approximately three to four weeks prior to the average first autumn freeze to allow for maximum growth.     

Seed germination response of cuphea to temperature

Cuphea (Cuphea viscosissima Jacq. × C. lanceolata W.T. Aiton; PSR23) is a potential new oilseed crop. Its oil is high in medium-chain fatty acids that are suitable for detergent/cleaner applications and also for cosmetics. The objective of this study was to determine the critical temperatures for cuphea seed germination. To determine the base, maximum, and optimum temperatures for seed germination, mature cuphea seeds were harvested from plants grown at Prosper, ND, in 2004, 2005, and 2006. Seeds were germinated on a temperature-gradient bar varying between 5 and 35 °C. Cumulative germination was calculated for each temperature treatment. Base temperature (T_b) and optimum temperature (T_o) were estimated from the third-order polynomial temperature-response functions for each year. In addition, germination rate per day was used in a linear model to estimate the base temperature below which germination rate was equal to zero (T_b), and the maximum temperature above which germination was equal to zero (T_m). The optimum temperature (T_o) was calculated as the intercept of sub-optimal and supra-optimal temperature-response functions. Through the third-order polynomial temperature-response functions and the sub-optimal/super-optimal intercept approaches, we were able to generate six estimates for each critical value. Estimates of the base temperature for cuphea seed germination ranged between 3.3 and 11 °C, with the most reliable estimates between 6 and 10 °C, similar to many warm-season crops such as corn (Zea mays L.) and sorghum (Sorghum bicolor L.). The optimum temperature for cuphea seed germination ranged between 18.5 and 24 °C with a mean value of 21 °C. The maximum temperature for seed germination ranged 33–38 °C. On this basis, a cuphea planting date after 20 May is recommended for east-central North Dakota.