Effective accumulated temperature and developmental threshold temperature for Semanotus bifasciatus （Motschulsky） in Beijing

In order to understand the occurrence and development of Semanotus bifasciatus （Motschulsky）, a borer insect of Platycladus orientalis in parts of northern and eastern China and to improve its prediction, the developmental threshold temperature （C1） and effective accumulated temperature （K） of S. bifasciatus were determined under conditions of constant and variable temperatures. The results show that under constant temperatures the value of C1 has a range of 8.90±1.77℃and the value of K lies between 95.19±13.14 degree-day for eggs; the values for larvae are C1= 13.26±3.06℃ and the number of degree-day is K 2,885.07±187.87 degree-day; for pupae the ranges are C1 = 8.93±2.49℃ and K= 131.20±25.63 degree-day. Under the condition of ambient temperatures, the values for eggs are C1= 17.33±1.24℃ and K= 70.79±8.99 degree-day. It is suggested that S. bifasciatus adults over-winter in a state of dormancy, not at a diapause. Warm winter may accelerate the life cycle ofS. bifasciatus. Equations can be used to predict an early occurrence ofS. bifasciatus.     

Xylogenesis in black spruce: does soil temperature matter?

In boreal ecosystems, an increase in soil temperature can stimulate plant growth. However, cambium phenology in trees was better explained by air than soil temperature, which suggested that soil temperature is not the main limiting factor affecting xylogenesis. Since soil temperature and snowmelt are correlated to air temperature, the question whether soil temperature directly limits xylogenesis in the stem will remain unresolved without experiments disentangling air and soil temperatures. This study investigated the effects of an increase of 4 °C in soil temperature and a consequent 1-week earlier snowmelt on growth of black spruce [Picea mariana (Mill.) BSP] in the boreal forest of Quebec, Canada. The soil of two natural stands at different altitudes was warmed up with heating cables during 2008-2010 and cambial phenology and xylem production were monitored weekly from April to October. The results showed no significant effect of the treatment on the phenological phases of cell enlargement and wall thickening and lignification. The number of cells produced in the xylem also did not differ between control and heated trees. These findings allowed the hypothesis of a direct influence of soil temperature on stem growth to be rejected and supported the evidence that, in the short term, air temperature is the main limiting factor for xylogenesis in trees of these environments.     

Application of time–temperature superposition principle to Chinese fir orthotropic creep

The application of time–temperature superposition principle (TTSP) to orthotropic creep in dry Chinese fir (Cunninghamia lanceolata [Lamb.] Hook.) was investigated through a sequence of short-term tensile creep for longitudinal (L), radial (R), and tangential (T) specimens in the temperature range of 30–150 °C. A visual assessment for the validity of TTSP was carried out by applying the approximated complex plane (ACP). The results showed that TTSP was well matched for R and T specimens using horizontal shift factor to construct master curves. As for L specimen, an additional vertical shift factor was applied to construct a smooth master curve, owing to the temperature-dependent compliance. Based on the application of ACP, the creep model governed by a power law was proposed to successfully depict the master curve for each main anatomy direction. The present study partially provided the firsthand data in verifying the applicability of TTSP of the orthotropic viscoelasticity of Chinese fir wood, and successfully constructed the rheological model to predict the orthotropic creep response. More importantly, the result can function as the base to the structural safety designs for the engineering structures of Chinese fir in practice.     

Effect of high temperature heat treatment on pH value of Masson Pine wood

Heat-treated wood has good dimensional stability, corrosion resistance and visual quality, but it is prone to mold, which limits its application. Based on the pH value of heat-treated wood, this study examines the factors affecting the pathogenesis causing heat-treated wood mold. Normally, the pH value of the heat-treated wood is between 4.38 and 5.10, which is suitable for the growth of mold. However, the pH of the heat-treated copper-containing material is between 6.63 and 7.12, which deviates the treated wood from the comfortable growth conditions for the mold, thereby reducing the occurrence of mold.     

The optimum temperature–humidity combination for the feeding activities of Japanese subterranean termites

Two species of Japanese subterranean termite, Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe), were used in an investigation of the optimum temperature–relative humidity (RH) combination for their feeding activities. Daily wood consumption per worker and survivals were measured, and the protozoan fauna in the hindgut were observed under 15 temperature–RH combinations for 1 week. Five temperatures (20°, 25°, 30°, 35°, and 40°C) and three RH conditions (50%, 70%, and 90% RH) were examined. The activities of the workers were highest at around 30°C for both species, and workers died at 40°C within 5 days and 2 days for C. formosanus and R. speratus, respectively. The optimum RH condition for feeding activity was 90% RH for C. formosanus and 70%–90% RH for R. speratus. The optimum temperature–RH combinations for feeding activities were 30°C at 90% RH for C. formosanus and 30°C at 70%–90% RH for R. speratus.     

Autumn temperature affects the induction of dormancy in first‐year seedlings of acer platanoides L.

First‐year seedlings of five latitudinal populations of Acer platanoides were subjected to decreasing photoperiod treatment under three different temperature regimes. The depth of the induced dormancy was quantified as the number of days to bud burst (DBB) under defined conditions favourable to growth. The results suggested a close relationship between autumn temperature and the strength of the induced dormancy, with high temperatures combined with short days leading to a deeper stage of dormancy. Northern and continental populations generally had bud burst earlier than southern. The results are discussed in relation to hypotheses for dormancy induction and release.     

Surface mould growth on wooden claddings – effects of transient wetting,relative humidity,temperature and material properties

ABSTRACT

Effects of climatic factors and material properties on the development of surface mould growth on wooden claddings were investigated in a laboratory experiment. Specimens of aspen (Populus tremula), Siberian larch (Larix Sibirica), American white oak (Querqus alba), Scots pine (Pinus sylvestris), Norway spruce (Picea abies) and thermally modified pine were incubated in eight climatic chambers at specified wetting periods (2 or 4?h per day), relative humidity (58–86%) and temperature conditions (10–27°C). Surface mould growth was assessed weekly for 13 weeks, and the results were evaluated statistically using Generalized Estimating Equations logistic regression models. All tested climatic factors had significant effects on the mould growth, and there were significant differences between the materials. The ranking of the materials varied with temperature and over time. Aspen, pine sapwood and oak were overall most susceptible to mould growth, and thermally modified pine least susceptible. There were significant differences between sapwood and heartwood for pine and spruce. The effect of density was tested on the spruce heartwood material, but was not found to be significant. The results can be used to further develop prediction models for mould growth on wooden claddings.     

Using master curves based on time–temperature superposition principle to predict creep strains of wood–plastic composites

To verify master curves obtained based on time–temperature superposition principle for wood–plastic composites (WPCs), a 220-day long-term creep test was conducted under an unconditioned environment. In this study, WPCs were made by extrusion with various formulations; using mountain pine beetle-attacked lodgepole pine flour and high-density polyethylene as raw materials, as well as maleated polypropylene as coupling agent. The results showed that the effect of naturally elevated temperature during the summer months caused additional increases in creep strain. The information obtained from the conventional creep study method may be insufficient to reflect the practical application. Comparisons between long-term data and the master curves showed that the master curves tended to overestimate the real creep strain of large specimens and that the deviation increased with time. The prediction of the master curve agreed more reasonably with the long-term data for coupled WPC products, whereas the master curves showed considerable overestimation for the uncoupled ones. In general, the master curves cannot precisely predict the long-term creep strain, but merely provide conservative estimations.     

Dose–response relationships between wood moisture content,wood temperature and fungal decay determined for 23 European field test sites

Scots pine sapwood (Pinus sylvestris L.) and Douglas fir heartwood (Pseudotsuga menziesii Franco) specimens were exposed in double layer field trials at 23 different European test sites under different exposure conditions (in total 27 test sets). The material climate in terms of wood moisture content (MC) and wood temperature was automatically monitored over a period of up to 7 years and compared with the progress of decay. The overall aim of this study was to establish dose–response relationships between climate factors and decay as a basis for the service life prediction of wood. The “Scheffer Climate Index” based on weather data collected at official meteorological stations at the different test sites poorly correlated with the corresponding decay progress and was therefore not a suitable tool for estimating site-specific decay potential. In contrast, the use of the combined material climatic parameters MC and wood temperature led to a feasible dose–response function and turned out to be a useful basis for service life prediction of wood.     

Will changes in root-zone temperature in boreal spring affect recovery of photosynthesis in Picea mariana and Populus tremuloides in a future climate?

Future climate will alter the soil cover of mosses and snow depths in the boreal forests of eastern Canada. In field manipulation experiments, we assessed the effects of varying moss and snow depths on the physiology of black spruce (Picea -mariana (Mill.) B.S.P.) and trembling aspen (Populus tremuloides Michx.) in the boreal black spruce forest of western Québec. For 1 year, naturally regenerated 10-year-old spruce and aspen were grown with one of the following treatments: additional N fertilization, addition of sphagnum moss cover, removal of mosses, delayed soil thawing through snow and hay addition, or accelerated soil thawing through springtime snow removal. Treatments that involved the addition of insulating moss or snow in the spring caused lower soil temperature, while removing moss and snow in the spring caused elevated soil temperature and thus had a warming effect. Soil warming treatments were associated with greater temperature variability. Additional soil cover, whether moss or snow, increased the rate of photosynthetic recovery in the spring. Moss and snow removal, on the other hand, had the opposite effect and lowered photosynthetic activity, especially in spruce. Maximal electron transport rate (ETR(max)) was, for spruce, 39.5% lower after moss removal than with moss addition, and 16.3% lower with accelerated thawing than with delayed thawing. Impaired photosynthetic recovery in the absence of insulating moss or snow covers was associated with lower foliar N concentrations. Both species were affected in that way, but trembling aspen generally reacted less strongly to all treatments. Our results indicate that a clear negative response of black spruce to changes in root-zone temperature should be anticipated in a future climate. Reduced moss cover and snow depth could adversely affect the photosynthetic capacities of black spruce, while having only minor effects on trembling aspen.     

Impact of temperature and nutrition on the toxicity of the insecticide λ-cyhalothrin in full-lifecycle tests with the target mosquito species Aedes albopictus and Culex pipiens

The global spread of the Asian tiger mosquito Aedes albopictus, an urban pest as well as a vector for arboviruses, is a threat for public health. As control measures include the use of insecticides such as the pyrethroid λ-cyhalothrin, it is crucial to assess their efficiency and their potential impact on the biodiversity especially under climate change conditions. To evaluate the environmental risk, biotests are well established for non-target organisms but not yet for mosquitoes. We therefore developed a full-lifecycle biotest for mosquitoes kept under quarantine conditions based on the OECD guideline 219. Therewith we tested the effect of temperature and nutrition on the ecotoxicological response to λ-cyhalothrin on the mosquitoes Ae. albopictus and Culex pipiens by assessing sublethal and life history parameters. The efficiency of λ-cyhalothrin decreased in both mosquito species with increasing temperature and changed with feeding protocol. At effective concentrations for potential mosquito control in surface waters, λ-cyhalothrin poses a high risk for indigenous aquatic key role species inhabiting the same microhabitats. Those aspects should to be taken into account in vector control strategies.     

Effect of forest structure and health on the relative surface temperature captured by airborne thermal imagery – Case study in Norway Spruce-dominated stands in Southern Finland

The effect of forest structure and health on the relative surface temperature captured by airborne thermal imagery was investigated in Norway Spruce-dominated stands in Southern Finland. Airborne thermal imagery, airborne scanning light detection and ranging (LiDAR) data and 92 field-measured sample plots were acquired at the area of interest. The surface temperature correlated most negatively with the logarithm of stem volume, Lorey’s height and the logarithm of basal area at a resolution of 254?m² (9?m radius). LiDAR-derived metrics: the standard deviations of the canopy heights, canopy height (upper percentiles and maximum height) and canopy cover percentage were most strongly negatively correlated with the surface temperature. Although forest structure has an effect on the detected surface temperature, higher temperatures were detected in severely defoliated canopies and the difference was statistically significant. We also found that the surface temperature differences between the segmented canopy and the entire plot were greater in the defoliated plots, indicating that thermal images may also provide some additional information for classifying forests health status. Based on our results, the effects of forest structure on the surface temperature captured by airborne thermal imagery should be taken into account when developing forest health mapping applications using thermal imagery.     

Long‐term effects of temperature on the wood production of Pinus sylvestris L. and Picea abies (L.) Karst. In old provenance experiments

Old provenance experiments with Scots pine and Norway spruce in Finland were used for assessing the long‐term effects of the projected climatic change on forest trees. The northernmost origins showed an increase in wood production when transferred southwards into a climate with an annual mean effective temperature sum close to that which is expected in northern areas as a result of the projected climatic change. A model is constructed with the estimated changes in wood production as a function of the annual mean temperature sum at the original location and the change in the annual mean temperature sum caused by the geographical transfer. The major changes in wood production are expected to occur in the northernmost areas of tree growth.     

Elevated temperature effects on germination and early growth of European aspen (Populus tremula), hybrid aspen (P. tremula × P. tremuloides) and their F2-hybrids

This study aimed to understand the interaction between temperature and genotype in terms of the effect on early seedling development of European aspen (Populus tremula) and various F₂-aspen hybrids. We evaluated the response of 16 different European aspen and F₂-hybrid families on seed germination, survival rate and seedling height in one- and two-family trials under three different temperature regimes. In one-family trials, higher germination and higher survival rates were observed in higher temperature (C1700), leading to taller seedlings. European aspen × hybrid aspen individuals (Asp × Hyb) had a higher survival rate and taller seedlings than Asp, Hyb × Asp or Hyb × Hyb individuals. The difference between Asp × Hyb and Hyb × Asp was pronounced. Both growth conditions and genotype (i.e., hybrid cross) had strong effects on germination, survival rate and height of European aspen and F₂-hybrid seedlings. However, the interaction of genotype and growth conditions also had a significant influence on survival rate and seedling height, but not on germination. Two-family trials involving European aspen and F₂-hybrids led to significant negative effects on germination and survival rate and also facilitation effects on seedling height. Similarly, genotype had strong effects on germination and survival rate. Different genotypes and traits affected survival rate and seedling height differently in different growth conditions. These differences were more pronounced in the warmest environment, i.e., 1,700 degree days. We conclude that introgression between F₂-hybrids and local European aspen is likely in the current climate, and any warming will likely favor certain F₂-hybrids, especially the most probable types (P. tremula × (P. tremula × P. tremuloides)).