Scenario analyses for the effects of harvesting intensity on development of forest resources,timber supply,carbon balance and biodiversity of Finnish forestry

We used national scenario analyses to examine the effects of harvesting intensity on the development of forest resources, timber supply, carbon balance, and biodiversity indicators of Finnish forestry in nine 10-year simulation periods (90-year simulation period) under the current climate. Data from the 11th National Forest Inventory of Finland were used to develop five even-flow harvesting scenarios for non-protected forests with the annual harvest ranging from 40 to 100 million m³. The results show that the highest annual even-flow harvest level, which did not decrease the growing stock volume over the 90-year simulation period, was 73 million m³. The total 90-year timber production, consisting of harvested volume and change in growing stock volume, was maximized when the annual harvest was 60 million m³. Volume increment increased for several decades when harvested volume was less than the current volume increment. The total carbon balance of forestry was the highest with low volume of harvested wood. Low harvested volume increased the values of biodiversity indicators, namely volume of deciduous trees, amount of deadwood and area of old forest.     

Timber mobilization and habitat tree retention in low-elevation mixed forests in Switzerland: an inventory-based scenario analysis of opportunities and constraints

Timber use in central Europe is expected to increase in the future, in line with forest policy goals to strengthen local wood supply for CO₂-neutral energy production, construction and other uses. Growing stocks in low-elevation forests in Switzerland are currently high as exemplified by the Swiss canton of Aargau, for which an average volume of 346 ± 16 m³ ha⁻¹ was measured in the 3rd Swiss National forest inventory (NFI) in 2004–2006. While this may justify a reduction of growing stocks through increased timber harvesting, we asked whether such a strategy may conflict with the sustainability of timber production and conservation goals. We evaluated a range of operationally relevant forest management scenarios that varied with respect to rotation length, growing stock targets and the promotion of conifers in the regeneration. The scenarios aimed at increased production of softwood, energy wood, the retention of potential habitat trees (PHTs) and the conversion to a continuous cover management system. They were used to drive the inventory-based forest simulator MASSIMO for 100 years starting in 2007 using the NFI sampling plots in Aargau. We analyzed model outputs with respect to projected future growing stock, growth, timber and energy yield and harvesting costs. We found growing stock to drop to 192 m³ ha⁻¹ in 2106 if business-as-usual (BAU as observed between the 2nd and 3rd NFI) timber volumes were set as harvesting targets for the whole simulation period. The promotion of conifers and a reduction of rotation lengths in a softwood scenario yielded 25% more timber over the whole simulation period than BAU. An energy wood scenario that reduced growing stock to 200 m³ ha⁻¹ by 2056 and promoted the natural broadleaved regeneration yielded 9% more timber than BAU before 2056 and 30% less thereafter due to decreasing increments. The softwood scenario resulted in higher energy yield than the energy wood scenario despite the lower energy content of softwood. Retaining PHT resulted in a reduction of timber harvest (0.055 m³ ha⁻¹ yr⁻¹ per habitat tree) and higher harvesting costs. Continuous cover management yielded moderate timber amounts throughout the simulation period, yet sustainably. Considering climate change, we discuss the risks associated with favoring drought- and disturbance-susceptible conifers at low elevations and emphasize that continuous cover management must allow for the regeneration of drought-adapted tree species. In conclusion, our simulations show potential for short-term increases in timber mobilization but also that such increases need to be carefully balanced with future forest productivity and other forest ecosystem services.

     

Nutrition management of cedar and hemlock plantations in coastal British Columbia

Recent re-measurements of silvicultural trials in conifer plantations on nutrient-poor cedar-hemlock (CH) cutovers on northern Vancouver Island have confirmed co-limitation by nitrogen and phosphorus. Repeated fertilization increased volumes of both cedar and hemlock on CH sites (at 2,500 stems ha^?1) by about 100 m³ ha^?1 relative to unfertilized plots 22 years following initial fertilization, and increased the productivity of regenerating conifers to a level approximating that of neighbouring hemlock-amabilis fir (HA) sites. More surprising was the response to fertilization on the more-productive HA sites. After 22 years, cedar in fertilized HA plots had produced an extra 180 m³ ha^?1 compared to unfertilized HA plots, while hemlock had produced an extra 250 m³ ha^?1 in fertilized plots (at 2,500 stems ha^?1). Thus, contrary to expectations, the greatest volume responses of both hemlock and cedar to fertilization occurred on the good (HA) sites rather than on the poor (CH) sites. Ecological studies of CH and HA sites supported the hypothesis that the poor nutrient supply and productivity of CH sites is a long-term consequence of excessive moisture, and that the two site types bracket a critical ecological threshold of moisture, aeration and redox.     

Using multi-source remote sensing data to classify larch plantations in Northeast China and support the development of multi-purpose silviculture

Due to increasing timber demands, large areas of secondary forests have been converted to larch plantations(LPs) in Northeast China because the secondary forests could not produce timber as much as LPs.However, there are a series of ecological problems such as lower soil fertility, reduced water-holding capacity and acidification of surface runoff water occurring in LPs because of the single-species composition of LPs.Therefore, a guidance on how to transform LPs into larch-broadleaf mixed forests(LBMFs) at a large spatial scale is needed for local foresters.First, Landsat time series data set and SPOT-5 images were combined to map the spatial–temporal distribution of LPs in Northeast China.Then, the topographical characteristics of LPs in 2010 s were determined.Furthermore, three sub-regions of LPs were divided closely linking to their ecosystem services and forest management aims.Finally, detailed information on how to transform the LPs into LBMFs was given according to the three subregions.The results showed that the area of LPs increased during 1980 s and 2010 s, and reached 2.61 million ha in2010 s.Of which, 0.72 million ha(27.6%) and 1.89 million ha(72.4%) LPs distributed in slopes less than 5° and greater than 5°, respectively.Of the LPs(72.4%) in slopes greater than 5°, 48.7 and 23.7% located in downslope(LPs locating at the down slope of adjacent secondary forests in the same aspect) and upslope(LPs locating at the up slope of adjacent secondary forests in the same aspect), respectively; 0.10 million ha(3.8%) located in slopes greater than 25°.The LPs were divided into Sub-Regions-Ⅰ, Ⅱ, Ⅲ according to slopes.For Sub-region-I(top role is to produce timber), self-fertilizing shrub species can be introduced after clean cutting for young-aged LPs, and release thinning can be applied for middle-aged LPs, fast growth thinning for near-matured LPs, and clear cutting for matured LPs.For Sub-Region-Ⅱ(the priority is to provide water conservation combined with timber production), the LPs should be induced into LBMFs.The LPs located the downslope positions in Sub-Region-Ⅱ can be transformed to LBMFs by natural regeneration of broadleaved tree species after thinning because of enough seed sources of broadleaved tree species from the secondary forests locating the upslope positions.The LPs located the upslope positions or the region where seed sources of broadleaved tree species are unavailable in Sub-Region-Ⅱ must be induced to LBMFs by artificial regeneration.For Sub-Region-Ⅲ(the preference is only for water conservation because the slope is greater than 25°), the LPs should be particularly protected from intensive disturbances, and induced into LBMFs by natural regeneration.     

Long-term effect of wood and peat ash on the growth of Pinus sylvestris on drained peatland

The effect of ash fertilization on height growth and volume production of Scots pine (Pinus sylvestris L.) was studied on oligotroph peatland in southeast Norway. In the year 1944, plots 15 m × 15 m size were fertilized with 0, 4, 7, and 10 tons ha^?1 of wood or peat ash. The area was treeless, but a satisfactory number of pine seedlings were present. All measurements were confined to the central inner plot, 10 m × 10 m area. Most plots were re-fertilized with 10 tons of wood ash ha^?1 in the year 1993. Wood ash had higher content of nutrients, and generally, it had greater growth enhancement effect than peat ash. When the amount of ash was increased, volume production significantly increased for the age period 38–50 years and the total production at age 50 years. The mean annual increment during the first 50 years was about 6 m³ ha^?1 for the plots applied with 10 tons of ash ha^?1. Trees on plots fertilized with 7 or 10 tons in 1944 and replenished with 10 tons ha^?1 at age 50 years (1993) had a mean annual increment of 14 m³ ha^?1 for the stand age period 51–68 years. Over time some tree roots from control plots and plots fertilized with 4 tons ha^?1 have captured nutrients from richer plots. Such effect is to a smaller extent relevant for treatment 7 tons. It is concluded that the content of mineral nutrients of wood and peat ash makes these ashes well suited as fertilizers on peatland.     

Effects of forest harvesting on runoff and sediment characteristics in the Hyrcanian forests,northern Iran

Loss of canopy cover by forest harvesting generally increases the average surface runoff volume and sediment. Selective cutting (single and group selection method) is the most usual forest harvesting method in the Hyrcanian forests in the north of Iran. The purpose of this study is to find the effect of selective logging technique on the hydrological behavior of runoff and sediment in the Kheyrud forests located in northern Iran over 1 year. Four treatments were implemented: natural forest without harvesting (C), forest with selective harvesting (H) and area without canopy cover (WC) and skid trail (S). Three types of data were measured in each plot including soil chemical and physical properties, runoff and sediment load after each rainfall. The results indicate significant differences (P ≤ 0.05) in runoff generation and sediment production with respect to the treatments cover. The runoff in all treatments showed relatively similar response to rainfall, while the highest runoff and sediment were observed in skid trails, and the area without canopy cover (1.13 and 0.62 mm, and 1.2 and 0.51 g m^?2), averagely. In contrast, the natural forest without harvesting and the forest with selective harvesting treatments exhibited the lowest amounts of runoff (0.2 and 0.44 mm) and sediment (0.1 and 0.17 g m^?2), averagely. Implementation of low logging technique was useful to control the effects of logging on the runoff and sediment yield.     

Logging residue removal after thinning in Nordic boreal forests: Long-term impact on tree growth

The aim of this study was to determine the effect of whole-tree harvesting (WTH) on the growth of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) as compared to conventional stem harvesting (CH) over 10 and 20 years. Compensatory (WTH + CoF) and normal nitrogen-based (CH + F or WTH + F) fertilisation were also studied. A series of 22 field experiments were established during 1977-1987, representing a range of site types and climatic conditions in Finland, Norway and Sweden. The treatments were performed at the time of establishment and were repeated after 10-13 years at 11 experimental sites. Seven experiments were followed for 25 years.Volume increment was on average significantly lower after WTH than after CH in both 10-year periods in the spruce stands. In the pine stands thinned only once, the WTH induced growth reduction was significant during the second 10-year period, indicating a long-term response.Volume increment of pine stands was 4 and 8% and that of spruce stands 5 and 13% lower on the WTH plots than on CH during the first and the second 10-year period, respectively. For the second 10-year period the relative volume increment of the whole-tree harvested plots tended to be negatively correlated with the amount of logging residue. Accordingly, the relative volume increment decreased more, the more logging residue was harvested, stressing the importance of developing methods for leaving the nutrient-rich needles on site.If nutrient (N, P, K) losses with the removed logging residues were compensated with fertiliser (WTH + CoF), the volume increment was equal to that in the CH plots. Nitrogen (150-180 kg ha⁻¹) or N + P fertilisation increased tree growth in all experiments except in one very productive spruce stand. Pine stands fertilised only once had a normal positive growth response during the first 10-year period, on average 13 m³ ha⁻¹, followed by a negative response of 5 m³ ha⁻¹ during the second 10-year period. The fertilisation effect of WTH + F and WTH + CoF on basal area increment was both smaller and shorter than with CH + F.     

Silvicultural strategies for increased timber harvesting in a Central European mountain landscape

The demand for wood as construction material, renewable source for energy and feedstock for chemicals is expected to increase. However, timber increments are currently only partly harvested in many European mountain regions, which may lead to supply shortages for local timber industries, decreases in forest resistance to disturbances and functioning as protection from gravitational hazards. Using an inventory-based forest simulator, we evaluated scenarios to increase wood mobilization in the 7105-km² Swiss canton of Grisons for the period 2007–2106. Scenarios varied with respect to landscape-scale harvesting amounts and silvicultural strategies (low vs. high stand-scale treatment intensity) and accounted for regulations and incentives for protection forest management. With 50 and 100% increases of harvests, the current average growing stock of 319 m³ ha^?1 was simulated to be reduced by 12 and 33%, respectively, until 2106 in protection forests of Northern Grisons, where management is prioritized due to subsidies. Outside protection forests and in Southern Grisons, growing stock was simulated to continually increase, which led to divergent developments in forest structure in- and outside protection forests and in the Northern and Southern Grisons. The effect of silvicultural strategies on simulated forest structure was small compared to the effect of future harvesting levels. We discuss opportunities and threats of decreasing management activities outside protection forests and advocate for incentives to promote natural regeneration also outside protection forests to safeguard long-term forest stability.     

A Natural Forest of Commercial Timber Species: Logging or Not Logging

Most tropical forests outside protected areas have been or will be selectively logged because the timber industry is a main income-generating resource for many developing countries. Therefore, understanding the composition of commercial timber species and logging types is key for sustainable forest management in countries like Vietnam as they move toward fulfilling Reducing Emissions from Deforestation and Forest Degradation (REDD+) agreements. Seven 1-ha plots were surveyed in the Central Highland of Vietnam, and 18 commercial tree species from these plots, whose timber is widely used by local people for housing and furniture making and timber is easily sold at local markets for high prices, were analyzed. In total, 151 tree species with a diameter at breast height (DBH) of ≥?10 cm were recorded. The 18 commercially valuable species assessed in this study accounted for 33.2% of all stems (total of 524 stems ha^?1 for all species), 47.1% of basal area (total of 34.35 m² ha^?1 for all species), and 50.8% of aboveground biomass/AGB (total of 262.68 Mg ha^?1 for all species). Practicing diameter-limit harvesting of all commercially valuable species with DBH of ≥?40 cm, which is widely performed in Vietnam, will reduce the number of stems by 7%, basal area by 31.6%, and AGB by 38.2%. Because such harvesting practices cause severe ecological impacts on the remaining forest, logged forests may require >?40 years to recover the structure status of a pre-logged forest. In addition, the recovery of the 18 commercially valuable species may require a much longer time because they comprised 33.2% of stems. Permission for logging natural forests should be given in Vietnam to sustain lives of local communities, where logging has been prohibited. However, alternative harvesting systems, such as reduced-impact logging systems, should be considered. The systems selected must simultaneously generate economic returns for local people and respect the REDD+ agreements with regard to protecting biodiversity and reducing carbon emissions.     

A Case Study on the Productivity of Forwarder Extraction in Small-Scale Southern Italian Forests

Most timber harvesting operations in the southern Mediterranean area of Italy can be considered to be in an early stage of mechanization. It is mainly based on agricultural tractors that are sometimes equipped with specific forest-related accessories such as winches, hydraulic cranes, or log grapples. In recent years, there has been an increase of specialized forestry machines working in Calabria, southern Italy, including forwarders, skidders and cable yarders. This study assesses the efficiency and costs of extraction using forwarders, as a mechanized alternative to agricultural tractors and horse logging. Time studies were conducted to quantify the productivity and operational cost of log forwarding for two John Deere forwarders in two different coniferous stands: (A) Calabrian pine and (B) silver fir. The empirical time study included 100 forwarding cycles (i.e., 50 for each site) that were broken down into four different work phase elements. Models for cycle time, total productivity and individual work phases were calculated. The average load per cycle was 11.8 m³ in stand A and 9.97 m³ in stand B and the average one-way forwarding distance was 306 m in A and 597 m in B. The average productivity per scheduled machine hour (SMH) was 14.4 m³ in A and 15.7 m³ in B, while the costs, calculated to be 3.60 €/m³ in A and 4.90 €/m³ in B, were considered lower respect traditional methods.     

Norway spruce (<Emphasis Type="Italic">Picea abies</Emphasis> L.) regeneration and growth of understory trees under single-tree selection silviculture in Finland

This study presents empirical data on regeneration and growth of understory trees and constructs simple models for predicting these characteristics at various stand structure and post-thinning standing volume levels. The field experiment was established on a grass/herb mineral soil site in central Finland. Regeneration and understory tree growth data were collected from 24 Norway spruce (Picea abies L.)-dominated mixed substands. Seedlings with heights from 5 to 130 cm were measured in 1996 and 2007. In addition, the annual height growth of Norway spruce seedlings was measured in 2007. The spatial pattern of the substands varied from clustered to regular with a decreasing standing volume. Stand complexity was uniform across the range of standing volume. In the 2007 survey, the amount of Norway spruce regeneration increased from approximately 400 to 5,000 seedlings ha⁻¹ when the post-thinning standing volume level was reduced from 230 to 90 m³ ha⁻¹, respectively. Nearly no seedlings were found when the standing volume was over 300 m³ ha⁻¹. The annual diameter increment in Norway spruce understory (dbh < 5 cm) trees decreased, on the average, from 2.3 to 0.3 mm with an increase in the standing volume level from 90 to 340 m³ ha⁻¹, respectively; their height growth showed also a decreasing trend when the standing volume increased. The results indicated that a post-thinning standing volume lower than 150 m³ ha⁻¹ with a regular overstory spatial structure provides a suitable environment for regeneration and growth of Norway spruce understory trees in the studied forest type.     

Partial cutting in mixedwood stands: Effects of treatment configuration and intensity on stand structure,regeneration, and tree mortality

In temperate and boreal mixedwood forests of eastern North America, partial disturbances such as insect outbreaks and gap dynamics result in the development of irregular forest structures. From a forest ecosystem management perspective, management of these forests should therefore include silvicultural regimes that incorporate medium- to high-retention harvesting. We present 12-year results of a field experiment undertaken to evaluate the effects of variable retention harvesting on stand structure, recruitment, and mortality. Treatments were gap harvesting (GAP), diameter-limit harvesting (DL), careful logging (CL), and careful logging followed by scarification (CL + SCAR), and an unharvested control. Although post-harvest basal area in the GAP treatment was significantly lower than that of controls, it maintained a diameter distribution profile and densities of balsam fir regeneration similar to those of pre-harvest conditions. Lower retention treatments (DL, CL, and CL + SCAR) tended to favor regeneration of pioneer, shade-intolerant species. Except for black spruce (for which mortality was highest in DL), stem mortality was similar among harvesting treatments. From an ecosystem management perspective, this study suggests that gap harvesting can maintain, in the short term, forest stand composition and structure similar to unharvested forests, and could be used where management objectives include the maintenance of late successional forest conditions.     

An analysis of potential investment returns and their determinants of poplar plantations in state-owned forest enterprises of China

China’s state-owned forest enterprises have been important national timber production bases and their timber resources have been severely degraded during the past decades. About one-third of the state-owned forestland has been classified as commercial forestland, but no economic mechanisms have been laid out on governing timber plantations under market economy. This paper demonstrates the potential investment returns and analyzes factors that directly influence the returns of fast-growing poplar plantations in a state owned-forest enterprise, China Jilin Forest Industry Group (CJFIG), in northeastern China. We examined practically possible ranges of mean annual increment (MAI), general inflation rate, rate of forest fund, and interest rate in the study area. We then computed net present values (NPV), equivalent annual income (EAI) and internal rate of return (IRR) by using the minimum, medium, and maximum values of the each determinant above. Results showed NPV ranged from $1,024 to $6,925 ha^?1, EAI ranged from $120 to $623 ha^?1 year^?1, and IRR ranged from 13.2 to 29.3 %. We show that growing poplar plantations could be two times more profitable than managing the existing natural forests in CJFIG by referring to EAI values. Improving MAI is the most effective way to increase both NPV and IRR while changes in the one-time tax at timber harvesting or changes in inflation rate have the least effect on NPV and IRR among the determinants studied. Discount rate, which can be easily manipulated by obtaining subsidies and policy-based loans, also has substantial influence on NPV. The state owned forest enterprises in China have special advantages to obtain relatively high economic returns in developing fast-growing plantation forests under market economy.     

Tree Quality in Agroforestry Systems Managed by Small-Scale Mayan Farmers in Chiapas,Mexico

Increasingly, plantations for food, fiber and wood, are necessary to provide a growing world population. Agroforestry systems become more and more important, however these systems usually develop in marginal conditions, limited land, restricted funding, occasional technical support and above this, there is limited documentation and evaluation of innovated traditional systems in indigenous and small-scale contexts, which challenge forest scientists. The aim of this research was to assess the quality of trees in plots managed by Mayan indigenous farmers who planted agroforestry systems with fine wood species to increase the value of land and labor in localities with highly-marginal social conditions in Northern Chiapas, México. Twenty oldest plots were selected within a group of previously established plots (eight with improved fallow, six with shaded coffee and six with maize crop associated to trees) where forest inventories were carried out in nested 100 and 1000 m²-circular plots. In all plots tree diameter, height, quality indicators and the incidence of the pest Hypsipyla grandella were measured. Trees in the maize-associated-to-trees system are favored by the practices applied to annual crop during the first 3rd–5th years, a period in which they are free from the interference of other trees and benefit from favorable light conditions, weeding and a higher intensive care from the farmer while shaded coffee and improved fallow have higher tree densities and a more closed canopy condition than maize associated to trees. In consequence, maize associated to trees shows 68.1 % stems with good form; shaded coffee and improved fallow averaged 40.5 and 39.7 % of good quality stems, respectively; improved fallow exhibited a greater number of suppressed trees than shaded coffee and maize associated to trees (p < 0.0001). In addition, maize associated to trees showed the highest proportion of trees with commercial value with 56.9 %, followed by improved fallow with 28.2 %, and shaded coffee with 11.8 % (p < 0.0001); the rest were trees with domestic uses. However, maize associated to trees significantly result with high incidence of H. grandella probably due to the crown exposure. Timber volume averaged 92.9 ± 68.9 m³ for improved fallow, 77.3 ± 24.8 m³ for shaded coffee, and 52.5 ± 39.7 m³ for maize associated to trees. The value of the fine wood represents increment in income, variety of products and self-employment for households. Nonetheless, improved fallow and coffee plantations might benefit from the elimination of competitors from larger trees to favor promising immature ones and pruning, while maize crop associated to trees might benefit from opportune pruning for controlling the stem borer as well as tree replacement to achieve long term replacement and harvesting.     

Thirteen-year monitoring of liming and PK fertilization effects on tree vitality in Norway spruce and European beech stands

The chemical fertility of the forest soils in the Belgian Ardenne is threatened by acidifying and eutrophying deposition and by the nutrient removal due to timber harvesting. Experiments were launched to evaluate the ability of liming and fertilization to improve foliar nutrition, maintain or restore crown condition and promote tree growth. In 1995, 10 liming and fertilization trials were installed in even-aged stands of European beech (5) and Norway spruce (5) distributed throughout the Ardenne. In each stand, two treatments were tested: liming with 3,000 kg ha⁻¹ of dolomitic limestone and liming plus fertilization with 0 to 800 kg ha⁻¹ of rock phosphate and 0 to 350 kg ha⁻¹ of K₂SO₄. Between 1995 and 2006, the foliar Ca and Mg status of spruce and beech trees improved in the limed stands, which limited significantly but did not prevent the decline in crown condition triggered by the summer drought in 2003. For spruce, liming also increased the increment in basal area. The additional fertilization increased the foliar nutrition in P but had no significant effects on soil chemistry and tree vitality.     

A model to estimate available timber and forest biomass and reforestation expenses in a mountainous region in Japan

We developed a model to estimate supply potentials and available amounts of timber and forest biomass resources from profitable sub-compartments of thinning and final felling operations. Economic balances were estimated while considering not only harvesting expenses but also reforestation expenses after final felling, which should be considered for sustainable forest management. Harvesting expenses were estimated based on two types of timber harvesting systems and three types of forest biomass harvesting systems in each sub-compartment. Then, the model was applied to Nasushiobara city of Tochigi prefecture, Japan. Reforestation expenses had large negative impacts on the financial balances of final felling operations. Few sub-compartments were profitable after considering reforestation expenses. Most profitable sub-compartments were those with mechanized operation systems and landing sales. These accounted for 17.19% of all sub-compartments, while only 5.75% of the sub-compartments were profitable based on their current operation systems and landing sales. Although the overall supply potentials of timber and forest biomass resources were 380,000 m3 and 210,000 Mg, respectively, and 15 times the planned harvest of coniferous tree volume of 25,000 m3year-1 and 50 times the annual demand for the woody gasification power generation of 4,000 Mg year-1 in Nasushiobara, available amounts of timber and forest biomass resources were only49,429 m3 and 33,333 Mg, which were 13.0% and 15.7% of supply potentials for landing sales with mechanized operation systems.     

Economic analysis on log damage during logging operation in Caspian Forests

Waste wood was studied in an economic enterprise by logging, function, tree species and log size in four Caspian hardwood sites. Damaged logs were recorded with additional information obtained for the location, dimensions and type of damage. The data were analyzed statistically to determine significant differences of damage during logging process. The results indicated that animal harvesting systems cause more volume (40.5% of log volume) and value loss (89.5 $·m^?3) to logs than mechanized harvesting systems (13.9% and 6.0 $·m^?3), also bucking resulted in significantly more volume (9.9% of log volume) and value loss (5.5 $·m^?3) when compared to skidding (0.2% of log volume and 0.2 $·m^?3), decking (0.4% of log volume and 0.2 $·m^?3) and loading (0.2% of log’s volume and 0.3 $·m^?3) operations. Study showed that the processes of skidding, decking and loading of logs have very little impact on damage levels. Volume and value losses of damaged logs are not sensitive to tree species and log size. The information from the field study is important in creating new guidelines or training to help minimize hardwood log damage during the timber harvesting process.     

Factors affecting forwarder productivity

Modern forwarders are an effective extraction option for timber harvesting operations that provide the opportunity for higher levels of mechanization. With their ability to carry logs from the forest to the roadside or processing areas, they have an established lower environmental impact in comparison to tree-length skidding options. However, little is published regarding their productivity potential or the factors that influence productivity. Three case studies were carried out; (1) a selective harvest in Calabria, Italy, with a smaller 12 t capacity John Deere 1110E, (2) a clear-cut on the West Coast of New Zealand, with a larger 19 t capacity John Deere 1910E and (3) a larger clear-cut operation in Canterbury, New Zealand, with two John Deere 1910E forwarders. An elemental time and motion study was used resulting in 73.4 h of detailed data, with 159 cycles extracting 2241 m³ of timber. Productivity models were created for all three sites as well as one combined model. Average cycle time was 33.2, 24.2 and 22.8 min, and average productivity 24.6, 37.1 and 42.7 t per productive machine hour, respectively. Cycle time was the fastest, and consequently productivity the highest, at the Canterbury site where the terrain roughness was low, overcoming any effect of the average small piece size (0.59 m³). Travel speed was slowest at the West Coast site showing the effect of wet and difficult terrain, with travel empty speed being just 3.8 km/h, compared to 6.7 and 6.9 km/h at the other two sites. Productivity at the two clear-cut operations was significantly higher than the selective cut, compounded by the use of the larger capacity forwarders. Distance and payload were significant factors for each cycle time model; in the combined model the sites were also significant. The calculated unit cost of forwarder extraction in the sites ranged from €2.55 to €4.70/m³. For regions such as southern Italy that have relatively low levels of forest mechanization, this information can be used to help design and improve more traditional labor-intensive harvesting systems.     

Estimating the annual supply potential and availability of timber and logging residue using forest management records of the Tochigi prefecture, Japan

We used forest management records to estimate the annual supply potential and availability of timber and logging residue from profitable subcompartments for all the cities and towns in the Tochigi prefecture. Five log markets and three factories in the Tochigi prefecture were assumed to be the destination of timber and logging residue, and the forest operation systems were set on the basis of interviews with forestry cooperative officials. The results showed that the annual supply potential of timber and logging residue was 450,304 m³ and 549,957 tons, of which 6 % (26,304 m³) and 37 % (204,122 tons) were from precommercial thinning operations, 61 % (276,180 m³) and 50 % (276,276 tons) were from commercial thinning operations, and 33 % (147,820 m³) and 13 % (69,559 tons) were from final-felling operations, respectively. When the unit price of the logging residue was 10,000 yen/ton, the annual logging residue availability from profitable subcompartments could almost cover the annual demand of the three facilities that we considered in this study. Introduction of feed-in tariffs had a significant impact. However, the ratios of the availability to supply potential with unit prices of logging residue of 3,000, 6,000, and 10,000 yen/ton were estimated to be only 1.67, 2.06, and 4.09 %, respectively. Considering the subsidies, the ratios respectively increased to 5.79, 7.35, and 13.09 %. Furthermore, the annual logging residue availability with subsidy could meet 70 % of the annual woody biomass demand of the large-scale factory in Sano city, which is 100,000 tons.     

Costs of protable sawmilling timbers from the acacia woodlands of western Queensland,Australia

Portable sawmilling trials with Acacia aneura (mulga) and A. cambagei (gidgee) have been undertaken to estimate the private landholder costs associated with small-scale timber production from woodlands in western Queensland, Australia. A time study of harvesting and milling operations facilitated estimation of landholder labour input requirements. The scarcity and small size of millable logs, coupled with the prevalence of timber defects, make harvesting and portable sawmilling of western Queensland acacias an expensive undertaking for landholders. The cost of producing sawn timber that meets the High Feature (HF) grade of Australian Standard AS2796 is estimated at between A$3,000/m³ and A$3,400/m³ of HF timber.