A genetic linkage map of rhodesgrass based on an F1 pseudo-testcross population

The linkage relationships between 164 polymorphic amplified fragment length polymorphism (AFLP) and 25 restriction fragment length polymorphism (RFLP) fragments assayed in a pseudo‐testcross population generated from the mating of single genotypes from two divergent cultivars were used to construct female, ‘Katambora’ (‘Kat’) and male, ‘Tochirakukei’ (‘Toch’) parental genetic maps for rhodesgrass. The ‘Kat’ genetic map consists of 84 marker loci (72 AFLP and 12 RFLP markers) distributed on 14 linkage groups and spans a total length of 488.3 cM, with an average distance of 7.8 cM between adjacent markers. The ‘Toch’ genetic map consists of 61 marker loci (52 AFLP and nine RFLP) mapped on 12 linkage groups spanning a total length of 443.3 cM, with an average spacing of 9.0 cM between adjacent markers. About 23% of the markers remained unassigned. The level of segregation distortion observed in this cross was 11.1%. In both maps, linked duplicated RFLP loci were found. These linkage maps will serve as a starting point for linkage studies in rhodesgrass with potential application for marker‐assisted selection in breeding programmes.     

Construction of a linkage map for watermelon (Citrullus lanatus (Thunb.) Matsum & Nakai) using random amplified polymorphic DNA (RAPD)

Summary A linkage map for watermelon (Citrullus lanatus) was constructed on the basis of RADP, ribosomal DNA restriction fragment length polymorphism (RFLP), isozyme, and morphological markers using F₁BC1. A segregating population of 78 individuals was the result of a backcross of a cultivated inbred line (H-7; Citrullus lanatus; 2n=22) and a wild form (SA-1; C. lanatus; 2n=22), in which the latter was the recurrent (male) parent. A total of 69 RAPD, one RFLP, one isozyme, and three morphological markers was found to segregate in the BC1 population. Linkage analysis revealed that 62 loci could be mapped to 11 linkage groups that extended more than 524 centimorgans (cM), while 12 loci segregated independently of all other markers. The locus for exocarp color was linked to two RAPD markers within a region of 5 cM on linkage group 4. The locus for flesh color was linked to a RAPD marker within a region of 30 cM on linkage group 6. The isozyme marker GOT was located on the linkage group 1. Linkage group 2 contained a locus for ribosomal DNA within 5 cM of a RAPD marker. Half of the RAPD markers on the linkage group 7 displayed severely distorted segregation. The construction of linkage map using molecular markers is necessary for the breeding of watermelon to introduce useful gene of wild watermelon efficiently. However the linkage map that was constructed for the most part on the basis of RAPD markers could not cover significant parts of the genome, the linkage map provides breeders of watermelons the possibility of tagging useful agronomic traits, as well as the gene for exocarp color.Abbreviations RAPD random amplified polymorphic DNA - RFLP restriction fragment length polymorphism - GOT glutamate oxaloacetate transaminase - MDH malate dehydrogenase - ACP acid phosphatase - 6PGH 6-phosphogluconate dehydrogenase     

The use of Rapd markers for lentil genetic mapping and the evaluation of distorted F2 segregation

To maximize the extent of polymorphism within a mapping population wide crosses are often made, frequently resulting in distorted segregation. Two parents used in the crosses in this study contained ca 50% from wild lentil genome (Lens culinaris ssp. Orientalis). We investigated the use of random amplified polymorphic DNA (RAPD) in the lentil (Lens culinaris Med.), for genetic mapping and testing for segregation distortion in F₂ populations. In cross 1, 83% of the RAPD markers showed segregation distortion, which was also observed for isozyme and morphological loci. By contrast, in cross 2, there was little (10%) segregation distortion. Out of 390 primers tested, 116 primers (29.7%) yielded 192 polymorphic fragments between parents of cross 2. This polymorphism was confirmed as reproducible. Seventy-eight segregating loci were analyzed for linkage, at a LOD score > 3.0, resulted in 28 RAPD, one RFLP, one morphological and three oligonucleotide markers, which were assigned to 9 linkage groups spanning 206 cM. Clearly, in lentil RAPD markers were valuable for genetic mapping and evaluation of segregation distortion. This revised version was published online in July 2006 with corrections to the Cover Date.     

Fingerprinting temperate <Emphasis Type="Italic">japonica</Emphasis> and tropical <Emphasis Type="Italic">indica</Emphasis> rice genotypes by comparative analysis of DNA markers

This paper describes the relative efficiency of three marker systems, RAPD, ISSR, and AFLP, in terms of fingerprinting 14 rice genotypes consisting of seven temperatejaponica rice cultivars, three indica near-isogenic lines, three indica introgression lines, and one breeding line of japonica type adapted to high-altitude areas of the tropics with cold tolerance genes. Fourteen RAPD, 21 ISSR, and 8 AFLP primers could produce 970 loci, with the highest average number of loci (92.5) generated by AFLP. Although polymorphic bands in the genotypes were detected by all marker assays, the AFLP assay discriminated the genotypes effectively with a robust discriminating power (0.99), followed by ISSR (0.76) and RAPD (0.61). While significant polymorphism was detected among the genotypes of japonica and indica through analysis of molecular variance (AMOVA), relatively low polymorphism was detected within the genotypes of japonica rice cultivars. The correlation coefficients of similarity were significant for the three marker systems used, but only the AFLP assay effectively differentiated all tested rice lines. Fingerprinting of backcross-derived resistant progenies using ISSR and AFLP markers easily detected progenies having a maximum rate of recovery for the recurrent parent genome and suggested that our fingerprinting approach adopting the ‘undefined-element-amplifying’ DNA marker system is suitable for incorporating useful alleles from the indica donor genome into the genome of temperate japonica rice cultivars with the least impact of deleterious linkage drag.     

Genetic analysis of Lolium. I. Identification of linkage groups and the establishment of a genetic map

A genetic map of Lolium has been produced using isozyme, restriction fragment length polymorphism (RFLP) and random amplified polymorphic DNA (RAPD) markers applied to a segregating family derived from an F₁ hybrid plant of L. perenne × L. multiflorum provenance, crossed on to a doubled haploid L. perenne. A total of 106 markers, out of a total of 160 polymorphic loci analysed, have been ascribed to seven linkage groups covering a map distance of 692cM, Two of these groups may be allocated to chromosomes 2 and 6 of the Lolium genome. The remaining unallocated markers, the majority of which showed severe segregation distortion, could be associated into small groups of two or three markers which showed no linkage with the main groups at a LOD of 2.8 or, if associated, could not be mapped in a satisfactory manner. This high incidence of disturbed segregations could be accounted for by the use of an interspecific hybrid between two species of differing genome size, with consequent cytological imbalance.     

Mapping a new source of resistance to powdery mildew in mungbean

Both restriction fragment length polymorphism (RFLP) and amplified fragment length polymorphism (AFLP) analyses were employed to map a new source of resistance to powdery mildew in mungbean. Disease scores of an F₂ population derived from the cross between a moderately resistant breeding line VC1210A and a susceptible wild relative (Vigna radiata var. sublobata, accession TC1966) showed a continuous distribution and was treated as a quantitative trait. Although no significant quantitative trait loci (QTL) that can explain the variation was detected by QTL analysis based on the reconstructed RFLP linkage map, new marker loci associated with resistance were discovered by AFLP analysis. The RFLP loci detected by two of the cloned AFLP bands are associated with resistance and constitute a new linkage group. A major resistance quantitative trait locus was found on this linkage group that accounted for 64.9% of the variation in resistance to powdery mildew. One of the probes developed in this study has the potential to assist in breeding for powdery mildew resistance in mungbean.     

Identification of a major QTL in cocoa (Theobroma cacao L.) associated with resistance to witches' broom disease

The witches’ broom disease caused by the fungus Crinipellis perniciosa is the main limiting factor for cocoa production in South America and the Caribbean. In Brazil, this disease affects almost all cocoa‐growing regions, causing serious economic, social and ecological damage. The aim of this study was to map genomic regions associated with resistance to C. perniciosa using an F₂ population derived from a cross between ‘Scavina‐6’(resistant) and ‘ICS‐1’(susceptible). The phenotypic index was determined as the average number of vegetative witches’ brooms per canopy area of each plant, the witches’ brooms were counted and eliminated during six field evaluations between May 1998 and August 1999. A total of 124 random amplified polymorphic DNA (RAPD) and 69 amplified fragment length polymorphism (AFLP) markers were mapped along 25 linkage groups covering 1713 cM of cocoa genome. After employing single factor and composite interval mapping analyses, a major quantitative trait loci (QTL) flanked by the marker AV14.940 was identified in the linkage group 11, explaining almost 35% of the resistance to witches’ broom. The present result suggests that this QTL acts as a major dominant component of resistance to this pathogen, with great potential for use in marker‐assisted selection procedures in cocoa breeding programmes.     

Wide mapping of a T-DNA insertion site in oilseed rape using bulk segregant analysis and comparative mapping

Doubled haploid oilseed rape lines segregating for a transgene inducing herbicide resistance (bar gene) were investigated for the wide mapping of the T-DNA insertion site. Bulk segregant analysis using presence/absence and intensity polymorphisms between the bulks, as well as comparative mapping with a linkage group deriving from another cross, led to the identification of 11 random amplified polymorphic DNA (RAPD) markers tightly or loosely linked to the bar gene. Ten RAPD loci out of 11 were located on the same side of the bar locus, strongly suggesting that the T-DNA integrated in a telomeric or subtelomeric position. The eleventh RAPD marker exhibited a strong segregation distortion, which could be the result of a heteroduplex formation. Comparison of the linkage groups obtained from the two crosses showed different recombination rates between markers, possibly reflecting differences in parental genetic backgrounds. Consequences and potential applications in transgene dispersal safety assessment studies are discussed.     

Identification of a molecular marker linked to the closed capsule mutant trait in sesame using AFLP

The identification of an amplified fragment length polymorphism (AFLP) marker linked to an agronomically useful trait in sesame is reported. A bulked segregant analysis (BSA) approach was adopted on segregating progenies of a cross between the closed capsule mutant line ‘cc3’, and the Turkish variety ‘Muganli‐57′. A total of 72 primer combinations were screened for linkage to the trait, but only one closely linked amplified fragment length polymorphism (AFLP) marker was identified. The linkage was confirmed by analysing the AFLP profile from single plants. The marker has the potential to accelerate breeding programmes aimed at modifying unwanted side‐effects of the closed capsule mutation by marker‐assisted selection.     

Identification of SCAR markers linked to <Emphasis Type="Italic">or</Emphasis>, a gene inducing beta-carotene accumulation in Chinese cabbage

The or mutation in Chinese cabbage (Brassica rapa L. ssp. pekinensis) is a recessive, single-locus mutation that causes the head leaves of the plant to accumulate carotenoids and turn orange. In China, considerable attention has been focused in recent years on breeding the variety with orange head leaves. In this study, sequence-characterized amplified region (SCAR) markers linked to the or gene were identified based on random amplified polymorphic DNA (RAPD) and amplified fragment length polymorphism (AFLP) by performing a bulked segregant analysis (BSA) using a doubled haploid (DH) population derived from the F₁ cross between 91-112 (white head leaves) and T12-19 (orange head leaves) via microspore culture. Two RAPD markers—OPB01-845 and OPAX18-656—and 1 AFLP marker, namely, P67M54-172, were identified to be linked to the or gene, and they were successfully converted into the SCAR markers SCR-845, SCOR204, and SCOR127, respectively. In a linkage analysis, these 3 SCAR markers and 2 previously published simple sequence repeat markers, namely, BRMS-51 and Ni4D09 (located on R9 linkage group), were mapped to the same linkage group with the or gene at a LOD score of 6.0, indicating that the or gene should be located on the linkage group R9 of the A genome. In addition, accuracies of 92%, 90%, and 89.1% were obtained when 110 different inbred breeding lines of Chinese cabbage were used for investigation with these 3 SCAR markers, indicating that these makers could be used in marker-assisted selection in orange head leaf breeding programs for Chinese cabbage.     

Analysis of RAPD and AFLP markers linked to resistance to Fusarium oxysporum f. sp. lactucae race 2 in lettuce (Lactuca sativa L.)

Root rot of lettuce, which is caused by Fusarium oxysporum f. sp. lactucae (FOL), is a critical problem in the production of lettuce. FOL-resistant lettuce genetic resources have been identified and used in breeding programs to produce FOL-resistant cultivars. However, the genetic characteristics of resistance genes have not been studied in depth and, therefore, no DNA markers are presently available for these genes. In this study, we analyzed the RRD2 (resistance for root rot disease race 2) locus, which confers resistance to FOL race 2. Resistance loci were analyzed using two cultivars of crisphead lettuce: VP1013 (resistant) and Patriot (susceptible). The segregation patterns of resistant phenotypes in F₂ indicated a single major locus. To define the positions of resistance loci, a linkage map was constructed using amplified fragment length polymorphism and random amplified polymorphic DNA (RAPD) markers. Quantitative trait loci analysis revealed the position of the major resistance locus. A high LOD score was observed for RAPD-marker WF25-42, and this marker showed good correspondence to the phenotype in different cultivars and lines. We successfully developed a sequence characterized amplified region marker from WF25-42.     

Mapping of EST-derived CAPS markers in Italian ryegrass (Lolium multiflorum Lam.)

New molecular markers derived from expressed sequence tag (EST) sequences were mapped on linkage maps of Italian ryegrass by a two-way pseudo-testcross strategy. cDNA sequences were obtained from various tissues of Italian ryegrass ( Lolium multiflorum ) and converted into cleaved amplified polymorphic sequence (CAPS) markers. Of 260 EST primer pairs that amplified a single band, 74 generated bands that showed clear polymorphisms among individuals of an F₁ mapping family. Of the 74 polymorphic marker loci, 69 were mapped on an Italian ryegrass linkage map previously constructed using amplified fragment length polymorphism (AFLP), restriction fragment length polymorphism (RFLP), and simple sequence repeat (SSR) markers. The newly-developed EST-CAPS markers would be useful as an efficient tool to identify genetic markers and to identify candidate genes for quantitative trait loci (QTLs) associated with important traits in Italian ryegrass.     

An AFLP-based linkage map of Zoysiagrass (Zoysia japonica)

To construct an amplified‐fragment length polymorphism (AFLP)‐based molecular linkage map of zoysiagrass, the selfed progenies of a clone consisting of 78 individuals were analysed using 471 AFLP markers derived from 126 PstI/MseI primer combinations. Of these markers, 364 were grouped into 26 linkage groups. The maps covered a total length of 932.5 cM, with an average spacing of 2.6 cM between markers. This information proves useful for gene targeting, quantitative trait loci mapping, and marker‐assisted selection in zoysiagrass.     

Construction of a genetic linkage map for witloof (Cichorium intybus L. var. foliosum Hegi)

A genetic linkage map based on an intraspecific cross between two inbred lines of witloof‐chicory (Cichorium intybus L. var. foliosum Hegi) has been constructed. In total, 129 RAPD markers were scored in 565 F₂ plants. Grouping of these markers at a LOD of threshold 4.0 resulted in nine linkage groups, which is equal to the chicory haploid genome. The nine linkage groups covered 609.6 cM. All 129 RAPD markers were linked to one of the nine groups. Three RAPD markers could not be mapped. Out of the 126 remaining RAPD markers, 18 showed segregation distortion with significance value of P < 0.01.     

Identification and characterization of RAPD and SCAR markers linked to anthracnose resistance gene in sorghum [Sorghum bicolor (L.) Moench]

Anthracnose, one of the destructive foliar diseases of sorghum growing in warm humid regions, is incited by the fungus Colletotrichum graminicola.The inheritance of anthracnose resistance was studied using the parental cultivars of Sorghum bicolor (L.) Moench, HC 136 (susceptible to anthracnose) and G 73 (anthracnose resistant). The F₁ and F₂ plants were inoculated with the local isolates of C. graminicola cultures. The F₂ plants showed a segregation ratio of 3 (susceptible): 1(resistant) indicating that the locus for resistance to anthracnose in sorghum accession G 73 segregates as a recessive trait in a cross to susceptible cultivar HC 136. RAPD (random amplified polymorphic DNA) marker OPJ 01₁₄₃₇ was identified as marker closely linked to anthracnose resistance gene in sorghum by bulked segregant analysis of HC 136 × G73 derived recombinant inbred lines (RILs) of sorghum. A total of 84 random decamer primers were used to screen polymorphism among the parental genotypes. Among these, only 24 primers were polymorphic. On bulked segregant analysis, primer OPJ 01 amplified a 1437 bp fragment only in resistant parent G 73 and resistant bulk. The marker OPJ 01₁₄₃₇ was cloned and sequenced. The sequence of RAPD marker OPJ 01₁₄₃₇ was used to generate specific markers called sequence characterized amplified regions (SCARs). A pair of SCAR markers SCJ 01-1 and SCJ 01-2 was developed using Mac Vector program. SCAR amplification of resistant and susceptible parents along with their respective bulks and RILs confirmed that SCAR marker SCJ 01 is at the same loci as that of RAPD marker OPJ 01₁₄₃₇ and hence, is linked to anthracnose resistance gene. Resistant parent G 73 and resistant bulk amplified single specific band on PCR amplification using SCAR primer pairs. The RAPD marker OPJ 01₁₄₃₇ was mapped at a distance of 3.26 cM apart from the locus governing anthracnose resistance on the sorghum genetic map by the segregation analysis of the RILs. Using BLAST program, it was found that the marker showed 100 per cent alignment with the contig{_}3966 located on the longer arm of chromosome 8 of sorghum genome. Therefore, these identified RAPD and SCAR markers can be used in the resistance-breeding program of sorghum anthracnose by marker-assisted selection.An erratum to this article can be found at     

Construction of high-resolution linkage map of the Ms locus, a restorer-of-fertility gene in onion (Allium cepa L.)

For the purpose of developing closely-linked molecular markers to the Ms locus, a restorer-of-fertility gene in onions (Allium cepa L.), bulked segregant analysis and randomly amplified polymorphic DNA (RAPD) analyses were utilized. Five RAPD markers polymorphic between male-fertile and male-sterile bulks were identified. These RAPD markers were converted into a simple PCR marker or cleaved amplified polymorphic sequence (CAPS) markers after sequencing the RAPD products and obtaining flanking sequences of the RAPD markers by genome walking. A linkage map was constructed with the Ms locus and flanking markers using a F₂ population. There was no recombinant between the Ms locus and two CAPS markers, jnurf05 and jnurf17. To increase resolution among these closely linked molecular markers and the Ms locus, a total of 1,346 F_2:3 and 2,927 F_2:4 plants were analyzed with two flanking markers for detection of recombinants. Segregation of male-fertility phenotypes in large-sized populations confirmed allelic segregation distortion in favor of the recessive Ms allele. Analysis of the recombinants with closely linked markers revealed only two recombinants between the Ms locus and the jnurf05 markers among 4,273 segregating plants, showing very tight linkage between the two loci. However, linkage disequilibrium between the two loci was not too strong among the breeding lines. Despite weak linkage disequilibrium, these tightly linked markers are useful in accurate marker-assisted selection of the Ms alleles and ultimate isolation of the Ms gene by map-based cloning approach.     

QTL mapping for economic traits based on a dense genetic map of cotton with PCR-based markers using the interspecific cross of Gossypium hirsutum × Gossypium barbadense

A high-density molecular marker linkage map of cotton based entirely on polymerase chain reaction-based markers is useful for a marker-assisted breeding program. Four kinds of markers—simple sequence repeats (SSRs), sequence-related amplified polymorphism (SRAP), random amplified polymorphic DNA (RAPD), and retrotransposon-microsatellite amplified polymorphism (REMAP)—were used to assay an F₂ population from a cross between “Handan208” (Gossypium hirsutum) and “Pima90” (Gossypium barbadense). Sixty-nine F₂ plants were used for map construction using 834 SSRs, 437 SRAPs, 107 RAPDs, and 16 REMAPs. Linkage analysis revealed that 1,029 loci could be mapped to 26 linkage groups that extended for 5,472.3 cM, with an average distance between 2 loci of 5.32 cM. The corresponding 69 F_2:3 families were grown, arranged in two replicates, and scored for eight phenotypes. Quantitative trait loci (QTL) analysis was performed by means of composite interval mapping using WinQtlCart ver 2.0. A total of 52 distinct QTLs were detected: 4 QTLs for lint index, 8 for seed index, 11 for lint yield, 4 for seed cotton yield, 9 for number of seed per boll, 3 for fiber strength, 5 for fiber length, and 8 for micronaire value. The present map and QTL analysis may provide a useful tool for breeders to transfer desirable traits from G. barbadense to the mainly cultivated species, G. hirsutum.     

Identification of commercial chicory cultivars for hydroponic forcing and their phenetic relationships revealed by random amplified polymorphic DNAs and amplified fragment length polymorphisms

One‐hundred and twenty‐four amplified fragment length polymorphism (AFLP) and 49 random amplified polymorphic DNA (RAPD) markers have been used to distinguish between 20 and 23 commercial chicory cultivars, respectively. These were all Cichorium intybus var. foliosum F₁ hybrids, currently used in hydroponic forcing. Five‐hundred and twenty RAPD primers (OPERON) were tested, of which 156 resulted in reproducible patterns and 26 yielded polymorphisms. Two‐hundred and fifty‐six AFLP primer‐combinations were tested and six combinations were selected for identification purposes. Similarity indices were measured and clustering has been done using pairwise comparison. Both types of marker provide similar conclusions. Two major clusters are formed, representing late and early cultivars. All cultivars were identified using 10 informative RAPD primers or three AFLP primer combinations. A low degree of polymorphism was detected between some early cultivars, suggesting a narrow genetic base in their breeding strategy.     

Clustering of amplified fragment length polymorphism markers in a linkage map of rye

Amplified fragment length polymorphisms (AFLPs) are now widely used in DNA fingerprinting and genetic diversity studies, the construction of dense genetic maps and in fine mapping of agronomically important traits. The AFLP markers have been chosen as a source to extend and saturate a linkage map of rye, which has previously been generated by means of restriction fragment length polymorphism, random amplified polymorphic DNA, simple sequence repeat and isozyme markers. Gaps between linkage groups, which were known to be part of chromosome 2R, have been closed, thus allowing the determination of their correct order. Eighteen EcoRI‐MseI primer combinations were screened for polymorphism and yielded 148 polymorphic bands out of a total of 1180. The level of polymorphism among the different primer combinations varied from 5.7% to 33.3%. Eight primer combinations, which revealed most polymorphisms, were further analysed in all individuals of the F₂ mapping population. Seventy‐one out of 80 polymorphic loci could be integrated into the linkage map, thereby increasing the total number of markers to 182. However, 46% of the mapped AFLP markers constituted four major clusters located on chromosomes 2R, 5R and 7R, predominantly in proximity to the centromere. The integration of AFLP markers caused an increase of 215 cM, which resulted in a total map length of almost 1100 cM.     

An extended genetic map of rye (Secale cereale L.)

A genetic linkage map of rye consisting of 92 markers was constructed by using isozyme and molecular marker techniques. For this purpose an F₂ population of 137 individuals was established on which RFLP studies with homologous and heterologous probes were performed. After establishing a reliable polymerase chain reaction (PCR) protocol, 280 random primers were screened for polymorphisms and 17 random amplified polymorphic DNA (RAPD) loci were mapped. The digestion of the template DNA prior to PCR increased the degree of polymorphism. Previously published markers could also be integrated into this map by using the JoinMap computer program. The resulting linkage map comprises a total of 127 markers and spans a distance of about 760 cM.