Supercritical fluid extraction of 2,4,6-trichloroanisole from cork stoppers

2,4,6-Trichloroanisole (TCA) is the compound most often associated with cork taint in wines and has been shown to have a very low sensory threshold ( approximately 5 ng/L in wine). A supercritical fluid extraction (SFE) method for TCA in bark cork stoppers was developed with quantification via gas chromatography-mass spectrometry with selected ion monitoring. Supercritical carbon dioxide functioned as the extracting solvent, and temperature and pressure were optimized for the extraction. The method was validated using the stable isotope (2)H(5)-TCA as the internal standard. Recovery of TCA from spiked corks was found to be within 1-4% of the theoretical concentration with a coefficient of variation ranging from 2.6 to 9.7%. TCA levels in corks pulled from wines described as tainted by experienced judges ranged from 0.13 to 2.11 microg/g of cork. The SFE procedure offers a rapid, quantitative, nearly solvent-free, and automated method for the extraction of TCA from complex solid matrices such as cork.     

Determination of 2,4,6-trichloroanisole and 2,4,6-tribromoanisole in wine using microextraction in packed syringe and gas chromatography-mass spectrometry

A selective and fast method for the quantitative determination of 2,4,6-trichloroanisole (TCA) and 2,4,6-tribromoanisole (TBA) in wine was developed. Microextraction in packed syringe (MEPS) was optimized for the extraction and preconcentration of the analytes using extremely small volume samples (0.1-1 mL). For GC-EI-MS, the limit of detection (LOD) for red and white wine was in the range 0.17-0.49 microg L(-1) for TCA and TBA. In addition to GC-EI-MS both GC-NCI-MS and GC-HRMS were used to further improve both selectivity and sensitivity. The lowest LODs were achieved using GC-HRMS in the EI mode. In red and white wine samples the LODs were between 0.22-0.75 ng L(-1) for TCA and TBA. The reproducibility and linearity for the GC-HRMS method was good, with RSD-values of 4-10% for spiked red wine samples at 1 ng L(-1) and linearity with R (2) > 0.962 over a concentration range of 1 to 100 ng L(-1).     

Method for the gas chromatographic assay with mass selective detection of trichloro compounds in corks and wines applied to elucidate the potential cause of cork taint

To investigate the role of trichloro compounds as a potential cause of "cork taint" in wine, an assay for trichloroanisole (TCA) and trichlorophenol (TCP) in corks and wine was developed utilizing solid phase extraction on a C(18) cartridge followed by gas chromatography with mass selective detection. Recovery and imprecision for TCA were 86-102 and 1.6-5.8%, respectively, and for TCP 82-103% and 1.7-3.9%, respectively. Limits of detection and quantitation were 0.1 and 2 ng/L, respectively, for TCA, and 0.7 and 4 ng/L, respectively for TCP. A survey of 2400 commercial wines revealed a higher incidence of cork taint in white wine than in red and in wines utilizing composite cork closures; wines from central Europe and Spain had higher overall rates of contamination and those from Canada and Italy the lowest. Significant but modest associations were found between the TCA and TCP contents of the wines and corks, but many wines exhibiting cork taint had low or undetectable concentrations of TCA. Over a 12-month period, experimentally bottled wines exhibited a slow increase in TCA and TCP content while cork closures manifested a decrease; most bottles showing cork taint contained low levels of TCA, and TCP concentrations were well below the sensory threshold. Neither compound was cytotoxic to human cell lines in culture up to final concentrations of 500 ng/mL. It was concluded that these two trichloro compounds are, at most, minor components of cork taint in commercial wines.     

Determination of haloanisols in white wine by immunosorbent solid-phase extraction followed by enzyme-linked immunosorbent assay

A high through-put screening immunochemical method to control the presence of 2,4,6-trichloroanisol (TCA) and 2,4,6-tribromoanisol (TBA), the main agents responsible for the musty odor in wine samples, has been developed. The method involves a selective (antibody-antigen) solid-phase extraction (SPE), followed by enzyme-linked immunosorbent assay (ELISA) analysis. The sample preparation method established uses for immunosorbents (ISs) prepared by covalently coupling antibodies developed for TCA on a sepharose support. At present, about 200-400 ng L-1 of TBA and TCA can be detected in white wine samples by the IS-SPE-ELISA method described here without any preconcentration step. Simultaneous analyses of many samples are possible with this method. Related chloroanisoles (2,3- and 2,6-dichloroanisols and 2,3,4,5-tetrachloroanisol) and chlorophenols (2,3,4,6-tetrachlorophenol and pentachlorophenol) usually present in contaminated wine samples are also effectively retained by the IS, although only 2,4,6-TCA and 2,4,6-TBA are detected by the ELISA used. The immunopurification procedure developed could also be useful as a selective cleanup method prior to chromatographic analysis.     

Immunochemical determination of 2,4,6-trichloroanisole as the responsible agent for the musty odor in foods. 2. Immunoassay evaluation

Immunoassays for 2,4,6-trichloroanisol (TCA) have been evaluated. The assays were developed after raising antibodies against three different immunizing haptens (1). Lack of reproducibility has been one of the main problems of these assays. Precision was worse on these assays, reaching lower limits of detection. The high lipophilicity of TCA and its, consequently, low water solubility have been found to be the major cause of this problem. A reliable microplate-based enzyme-linked immunosorbent assay (ELISA) has been set after consideration of the TCA physicochemical features and evaluation of important parameters affecting immunoassay performance. The immunoassay uses As78 (developed against hapten B-KLH) and C9-OVA as the coating antigen. The selectivity is high although the brominated analogue 2,4,6-TBA is also recognized. In buffered media containing 7% ethanol, the resulting assay shows a good accuracy with an IC(50) value of 0.53 microgram L(-)(1) and a limit of detection of 0.044 microgram L(-)(1). Red and white wine samples caused important interferences in the immunoassay demonstrating the necessity of a cleanup procedure prior to the ELISA.     

Optical sensor for sulfur dioxide determination in wines

A method for the determination of free and total sulfur dioxide in wines, based on the use of an optical sensor that employs a dichlorobis(diphenylphosphino)methane dipalladium I complex [Pd(2)(dppm)(2)Cl(2)] immobilized in a PVC membrane plasticized with o-nitrophenyloctylether (o-NPOE) is described. A sensing membrane [4.2% Pd(2)(dppm)(2)Cl(2), 20.8% PVC, and 75% o-NPOE] was adapted to the tip of a bifurcated optical fiber bundle to perform reflectance measurements at 550 nm. The detection system consisted of two cells (40 mL), which hold the sample solution (plus reagents) and the optical sensor, respectively. For the determination of free SO(2), a wine sample was mixed with H(2)SO(4) solution in the sample cell, into which N(2) was bubbled, providing mixing of the solutions and conducting the SO(2) formed toward the detection cell. For determination of total SO(2), a KOH solution was mixed with the wine in the sample cell. Afterward, an H(2)SO(4) solution was added to the cell, and then N(2) was bubbled to conclude the measurement. Linear responses up to 50 and 150 mg L(-1) were obtained for free and total SO(2), with detection limits of 0.37 and 0.70 mg L(-1), respectively. The repeatability of the method was evaluated by carrying out 10 measurements using a single wine sample, providing relative standard deviation values of 2.2 and 2.5% for free and total SO(2), respectively. The sensing membrane prepared from 10 muL of the cocktail solution lasted for 80 measurements, whereas those prepared from 200 muL can be used for 250 measurements. The method was applied to free and total SO(2) determination in wines, and the results did not show significant difference from those obtained with the Ripper reference method at a confidence level of 95%.     

Identification and responsibility of 2,4,6-tribromoanisole in musty, corked odors in wine

In this work, gas phase chromatography analysis coupled with selective selected ion monitoring (SIM) identified 2,4,6-tribromoanisole (TBA) in wines found on tasting to have significant "musty or corked" character, although they did not contain noteworthy quantities of chloroanisoles or chlorophenols, the contaminants generally reported to cause this type of defect. The perception thresholds were studied, together with contamination conditions during winemaking, storage, and bottle-aging. A "musty" off-odor was perceptible on smelling wine containing as little as 4 ng L(-)(1) TBA, and spoilage may be detected by retro-olfaction at even lower concentrations. TBA, produced by O-methylation of its direct precursor, 2,4,6-tribromophenol, generally comes from sources in the winery environment. This paper is the first to identify the sources of a large number of cases of wines polluted during storage in premises where the atmosphere was contaminated with TBA used recently to treat wood, or originating from much older structural elements of the winery, or from used wooden containers. In certain cases, although the initial source had been eliminated, residual pollution adsorbed on walls could be sufficient to make a building unsuitable for storing wooden barrels and plastics, as well as corks, which have been found to be particularly susceptible to contamination by the TBA in the winery atmosphere.     

Lead contamination in Portuguese red wines from the Douro region: from the vineyard to the final product

To quantify lead contamination in wines and to try to identify major lead sources, two winemaking processes were followed during one annual cycle of wine production. Two vineyards from the Douro Portuguese region and two types of wine, one red table wine, which has been produced in a very modern winery, and one red fortified wine (similar to Port), which has been produced by a traditional vinification process, were selected for this study. Aerosols from the vineyards atmosphere, vineyard soil, vine leaves, grapes, and samples from the intermediary and final wine product were collected. Suitable pretreatments, namely, high-pressure microwave assisted digestion (soil, leaves, and grapes) and UV-irradiation (grape juices and samples from the different steps of the vinification processes), were used. The samples were analyzed in terms of lead total concentration and respective isotope ratios by using inductively coupled plasma mass spectrometry and atomic absorption spectrophotometry with electrothermal atomization. It was observed that the major sources of lead were in the vinification system, the more traditional one introducing more lead than the modern one. For the fortified wine, the lead concentration increased from 4.7 microg L(-1), in the grape juice, to 17.2 microg L(-1), in the final product, while for the table wine the increase was from 4.1 to 13.1 microg L(-)(1). Therefore, only about 1/4 (fortified wine) and 1/3 (table wine) of the lead total content of the final products came from soil and atmospheric deposition. Therefore, it is expected that marked reductions of the lead content in the wines would occur if the sources of lead were removed from the tubes and containers used in the vinification system, particularly by using welding alloys and small fittings free of lead. The lead levels in the vine leaves (global mean of 0.43 microg g(dry leave)(-1)) and grapes (global mean of 35 ng g(dry grape)(-1)) were similar in both vineyards.     

Automated on-line solid-phase extraction-liquid chromatography-electrospray tandem mass spectrometry method for the determination of ochratoxin A in wine and beer

An automated on-line solid-phase extraction-liquid chromatography-electrospray tandem mass spectrometry (SPE-LC-ESI-MS/MS) method was developed for the determination of ochratoxin A (OTA) in alcoholic beverages. Mean recoveries for wine and beer were, respectively, 75 and 82%. Detection was achieved in negative ionization with a Q TRAP mass spectrometer operating in multiple-reaction monitoring (MRM) mode or enhanced product ion (EPI) mode, using the third quadrupole as linear ion trap. The MRM mode turned out to be more sensitive; the method allowed accurate determination of OTA in the range of 0.01-25 ng mL(-1) using external calibration. Within-day and between-day relative standard deviation percentages were <6.2 and <9.1%, respectively. In EPI mode, fragmentation spectra at the limit of quantification (0.03 ng mL(-1)) and good linearity could be obtained. Application of the method (MRM mode) to the analysis of several wine and beer samples purchased in local stores revealed OTA levels in the ranges of 0.03-1.44 ng mL(-1) for wines and 0.02-0.14 ng mL(-1) for beers.     

(E)-1-(2,3,6-trimethylphenyl)buta-1,3-diene: a potent grape-derived odorant in wine

(E)-1-(2,3,6-Trimethylphenyl)buta-1,3-diene (TPB) was identified as a potent odorant in acid hydrolysates of crude glycoconjugate fractions isolated from grapes and grape vine leaves. TPB was also identified in a Semillon wine, using gas chromatography/mass spectrometry, by co-injection with an authentic sample. TPB had an aroma detection threshold of 40 ng/L in a neutral white wine and the concentration of TPB in four out of five white wines analyzed ranged from 50 to 210 ng/L.     

3-Hydroxy-4,5-dimethyl-2(5H)-furanone levels in fortified Madeira wines: relationship to sugar content

The maturation of Madeira wines usually involves exposure to relatively high temperatures and humidity levels >70%, which affect the aroma and flavor composition and lead to the formation of the typical and characteristic bouquet of these wines. To estimate the levels of sotolon [3-hydroxy-4,5-dimethyl-2(5H)-furanone] and their behavior over time, 86 aged Madeira wines samples (1-25 years old), with different sugar concentrations, respectively, 90 g L(-)(1) for Boal, 110 g L(-)(1) for Malvazia, 25 g L(-)(1) for Sercial, and 65 g L(-)(1) for Verdelho varieties, were analyzed. Isolation was performed by liquid-liquid extraction with dichloromethane followed by chromatographic analysis by GC-MS. The reproducibility of the method was found to be 4.9%. The detection and quantification limits were 1.2 and 2.0 microg L(-)(1), respectively. The levels of sotolon found ranged from not detected to 2000 microg L(-)(1) for wines between 1 and 25 years old. It was observed that during aging, the concentration of sotolon increased with time in a linear fashion (r = 0.917). The highest concentration of sotolon was found in wines with the highest residual sugar contents, considering the same time of storage. The results show that there is a strong correlation between sotolon and sugar derivatives: furfural, 5-methylfurfural, 5-hydroxymethylfurfural, and 5-ethoxymethylfurfural. These compounds are also well correlated with wine aging. These findings indicate that the kinetics of sotolon formation is closely related with residual sugar contents, suggesting that this molecule may come from a component like sugar.     

Development of a simple method for the determination of genistein, daidzein, biochanin A, and formononetin (biochanin B) in human urine.

A simple method was developed for the determination of free and/or total isoflavones daidzein, genistein, and their respective 4'-methoxy derivatives biochanin A and formononetin (biochanin B) at low levels in human urine. A solid-phase extraction on octadecyl silica (C(18)) columns was used for the isolation of the phytoestrogens from the matrix. An extraction on a ChemElut 1010 column connected on-line to a Florisil cartridge by a Teflon stopcock was used for effective eluate purification. A mixture of dichloromethane and ethyl acetate was used for elution of the isoflavones from the columns in tandem. The isoflavones were determined as trimethylsilyl (TMS) ethers using GC/MS-SIM after separation on an HP-5MS fused silica column. TMS ethers were obtained by using BSTFA containing 1% of TMCS. For the determination of free isoflavones 6-hydroxyflavone was used as internal standard, whereas robigenin was used in the case of total isoflavone determination. Recoveries for free isoflavones under study varied from 63.5 to 89.6% at the 25 ng mL(-)(1) level and from 63.5 to 89. 2% at the 5 ng mL(-)(1) level in urine. Analytical curves were linear between 5 and 25 ng mL(-)(1). Detection limits varied from 1 ng mL(-)(1) for formononetin to 2.3 ng mL(-)(1) for daidzein. Recoveries for total isoflavone determination after enzymatic hydrolysis with glucuronidase from Helix pomatia ranged from 56.5 to 77.1% at the 25 ng mL(-1) level.     

Contribution of benzenemethanethiol to smoky aroma of certain Vitis vinifera L. wines

Benzenemethanethiol, a volatile thiol with a strong empyreumatic aroma reminiscent of smoke, has been identified in boxwood (Buxus sempervirens L.) as well as in red and white Vitis vinifera L. wines. The perception threshold in a model hydroalcoholic solution is approximately 0.3 ng/L. All of the wines analyzed for this study contained this compound in concentrations of several dozen nanograms per liter. The Chardonnay wines had 30-40 ng/L. Sensory discrimination between a wine containing 7 ng/L benzenemethanethiol and the same wine with an additional 4 ng/L is very significant; the difference in smell is described as "empyreumatic". This compound can therefore significantly contribute to the aroma of certain wines (Sauvignon Blanc, Semillon, Chardonnay, etc.) containing concentrations as high as 30-100 times higher than their perception threshold.     

Quantitative determination of sulfur-containing wine odorants at sub parts per billion levels. 2. Development and application of a stable isotope dilution assay

[(2)H(10)]-4-Mercapto-4-methylpentan-2-one (d(10)-1), [(2)H(2)]-3-mercaptohexan-1-ol (d(2)-2), and [(2)H(5)]-3-mercaptohex-1-yl acetate (d(5)-3), deuterated analogues of impact odorants of wines, were used to determine quantitatively the natural compounds in white wines (Muscadet, Sauvignon, and Bacchus) with a stable isotope dilution assay using gas chromatography coupled either with ion trap tandem mass spectrometry (GC-ITMS-MS) or with atomic emission detection monitored on sulfur-selective acquisition (GC-AED). The thiol compounds were recovered from wines by liquid-liquid extraction, then purified from the wine extracts by covalent chromatography, and analyzed. The quantitative determination of 4-mercapto-4-methylpentan-2-one 1 in the wines that were analyzed was performed better with GC-AED than with GC-ITMS-MS under the conditions that were used. However, the detection limit of the method was higher than the odor threshold of 4-mercapto-4-methylpentan-2-one 1 in wine (5 vs 0.8 ng/L). The levels of this compound in the Sauvignon and Bacchus wines were much higher than its odor threshold, but it was not detectable in the Muscadet wines. On the contrary, GC-ITMS-MS was much more sensitive than GC-AED for detection of 3-mercaptohexan-1-ol 2 and 3-mercaptohex-1-yl acetate 3, and the detection limits were much lower than their odor thresholds in wine. The former compound was detected in all of the Muscadet wines that were analyzed at levels always higher than its odor detection threshold, while the latter occurred at levels higher than its odor threshold in only one Muscadet wine.     

Direct and combined methods for the determination of chromium, copper, and nickel in honey by electrothermal atomic absorption spectroscopy

In the present work, direct methods for the determination of chromium, copper, and nickel in honey by electrothermal atomic absorption spectroscopy were developed using experimental design as an optimization tool. Once the optimum conditions for the individual methods were established, a direct method for the combined determination of the three elements was optimized using the response surface tool. Palladium was used as chemical modifier in all cases. Honey was diluted in water, hydrogen peroxide, and nitric acid. Triton X-100 was added to minimize the matrix effect and the viscosity of the sample. The RSD (better than 10%) and the analytical recovery (98-103%) were acceptable for all of the developed methods. Calibration graphs were used in the four methods to determine the concentration of the analytes in the sample. The detection limits of the combined method (0.21, 0.35, and 0.37 microg L(-)(1) for Cr, Cu, and Ni, respectively) were similar to those obtained for the individual methods (LOD = 0.17, 0.21, 0.33 microg L(-)(1) for Cr, Cu, and Ni, respectively). The direct-combined proposed method has been applied to the determination of chromium, copper, and nickel content in representative honey samples from Galicia (northwestern Spain). The concentrations found in the analyzed samples were in the range of (5.75 +/- 0.64)-(26.4 +/- 0.38) ng g(-)(1) of Cr, (79 +/- 7.8)-(2049 +/- 80) ng g(-)(1) of Cu, and (12.6 +/- 1.36)-(172 +/- 6.88) ng g(-)(1) of Ni.     

Determination of 3-alkyl-2-methoxypyrazines in lady beetle-infested wine by solid-phase microextraction headspace sampling

This study determined the concentration of 3-alkyl-2-methoxypyrazines in Frontenac and Leon Millot wines made from grapes that were naturally or artificially infested with the multicolored Asian lady beetle, Harmonia axyridis (Pallas) (Coleoptera: Coccinellidae). Headspace sampling with solid-phase microextraction (SPME) and gas chromatography (GC) was used for the quantification of 3-isopropyl-2-methoxypyrazine (IPMP), 3- sec-butyl-2-methoxypyrazine (SBMP), and 3-isobutyl-2-methoxypyrazine (IBMP). The resulting method parameters included linearity (r2 > 0.98), limit of detection (>0.25 ng/L), relative standard deviation (<20%), and recovery (75-125%). IPMP concentrations in wine were not significantly different among the levels of natural or artificial infestations of H. axyridis. SBMP was found only in wine artificially infested with H. axyridis. IBMP was found in wine artificially infested with H. axyridis and in Frontenac wine, but not in Leon Millot. The consequences of these results for future research in the contamination of wine with H. axyridis are discussed.     

Oenological influences on the D/H ratios of wine ethanol

Within the European Union the determination of chaptalization of wine involves the comparison of the D/H ratios of ethanol with the ratios of authentic wine samples that are similar to the suspect wine in terms of geographical origin, grape variety, and vintage. In the frame of a databank project comparison, wines are produced under official control on a small scale. To clarify the influence of the different production conditions between commercial wines and these databank wines, wines that were produced under varying conditions were investigated by the (2)H NMR method. None of the parameters under investigation, such as yeast strain, fermentation temperature, or wine fining, showed a significant influence on the (D/H)(I) ratio of wine ethanol, which is the most indicative parameter for the determination of the addition of extraneous sugar to wine. For the (D/H)(II) ratio, different values were found for different yeast strains used for fermentation and a slight decrease was observed with increasing fermentation temperature. At increasing points of fermentation yield an increase of the D/H ratios was found in the present alcohol. The total increase of the (D/H)(I) ratio throughout the fermentation was approximately 1 ppm, so that with a fermentation yield of more than 50% no statistical difference could be observed.     

Optimized procedures for analyzing primary alkylamines in wines by pentafluorobenzaldehyde derivatization and GC-MS

Biogenic primary alkylamines in wines are toxicologically significant and affect sensory properties. An optimized method for analysis in wines involving derivatization with pentafluorobenzaldehyde (PFB) to corresponding pentafluorobenzylimines, liquid-liquid extraction, and gas chromatography with mass selective detection is presented. Reaction parameters including pH, temperature, time, and derivatizing agent and amine concentration were varied in simulated wine solution (15% ethanol) to determine effect on reaction efficiency. Optimal reaction efficiency was characterized (pH 12, 24 degrees C, 30 min, and 10 mg/mL PFB), and parameters were used for the analysis of 10 biogenic alkylamines in 12 California wines. Alkylamine concentration in wines ranged from 0.048 to 91 mg/L. Amine recoveries from wines at five fortification levels (0.1-85 mg/L) were generally 81-100%.     

Determination of free proline and monosaccharides in wine samples by high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD)

A sensitive and selective analytical method for the simultaneous separation and quantitative determination of proline and free monosaccharides in wine samples by high-performance anion-exchange chromatography coupled with pulsed amperometric detection is described. Under optimized experimental conditions, a complete separation was obtained in less than 30 min, using an isocratic elution with 10 mM NaOH and 1 mM Ba(OAc)(2). No postcolumn addition of strong bases to the eluent for enhancing detection sensitivity was needed. Upon 25-fold sample dilution and purification to avoid interference of tannins, pigments, and phenolic compounds, the fingerprinting of common monosaccharides (i.e., arabinose, glucose, fructose, galactose, and xylose) and proline in wines, musts, and vinegars can be easily accomplished. The method allows high recovery and satisfies the necessary requirements for accuracy, repeatability, and sensitivity. Values obtained for proline content ranged from 470 to 1190 mg/L in "Aglianico" red wines (mean value, 870 +/- 192 mg/L, n = 21) and from 168 to 286 mg/L in white wines (mean value, 208 +/- 32 mg/L, n = 11). Lower levels were found in musts of red and white grapes, 550 and 87 mg/L, respectively. The lowest content of proline, ca. 10 mg/L, was found both in white and red vinegars.