Clay Addition to Sandy Soil Reduces Nutrient Leaching—Effect of Clay Concentration and Ped Size

Leaching of nutrients, particularly in sandy soil with low nutrient and water holding capacity (WHC), is a major threat to marine and fresh water pollution. Addition of clay soil to sandy soil could be an option to increase water and nutrient holding capacity of sandy soils, but the effect of clay soil addition may depend on the form in which the clay soil is added and the addition rate. Clay soil was added to sandy soil at rate of 10 or 20% (w/w) finely ground (<2 mm) or 2 and 5 mm peds with and without nitrogen (N) and phosphorus (P) fertilizer equivalent to 60 kg N ha^?1 and 15 kg P ha^?1. The clay sand mixture for each treatment was weighed (30 g) in cores with nylon mesh at the bottom. The soils were incubated at 80% WHC for 7 weeks. To obtain leachate, 20 mL reverse osmosis (RO) water was added every week to each core. Leachate was analysed for inorganic N, P, and pH. Soil was analyzed for N, P, and pH before and after the leaching. Clay addition significantly reduced the leaching of N and P compared to sandy soil alone, with greatest reduction by finely ground clay soil and least with 5 mm peds. Compared to sandy soil alone, 83% more N was retained in clay-amended soil and P retention was doubled. This study showed that addition of finely ground clay soil can substantially reduce N and P leaching and thereby increase fertilizer retention compared to sandy soil alone.     

Zeolite Effects on Immobile Water Content and Mass Exchange Coefficient at Different Soil Textures

The concern for groundwater pollution by agrichemicals through solute movement within the soil is widespread. Zeolite is a type of soil amendment that is utilized to improve physical properties of soil and ameliorate polluted soil. The high negative charge of the zeolite and its open space structure allows adsorption and access of heavy metals and other cations and anions. The objectives of this research were (i) to determine the effects of different application rates of zeolite (0, 2, 4, and 8 g kg^?1) on the immobile water content and mass exchange coefficient in a loam soil and then (ii) to determine the effects of optimum application rate of zeolite on the immobile water content and mass exchange coefficient of sandy loam and clay loam soils in saturated conditions by a mobile and immobile (MIM) model. In a disturbed soil column, a method was proposed for determination of MIM model parameters, that is, immobile water content (θ_im), mass exchange coefficient (α), and hydrodynamic dispersion coefficient (D_h). Breakthrough curves were obtained for different soil textures with different zeolite applications in three replicates, by miscible displacement of chloride (Cl^?1) in disturbed soil column. Cl^?1 breakthrough curves were evaluated in terms of the MIM model. The results showed that the pore water velocity calculated based on the total soil volumetric water content (θ_im+ θ_m) and real pore water velocity calculated based on the mobile water content (θ_m) increased in the loam soil with an increase in zeolite application rate, so that, between these different rates of zeolite application, the maximum value of pore water velocity and real pore water velocity occurred at zeolite application rates of 8.6 and 11.5 g kg^?1, which are indicated as the optimum application rates. However, the comparison between different soils showed that the zeolite application rate of 8 g kg^?1 could increase pore water velocity of sandy loam and loam soils by 31% more than that of clay loam soil. The immobile water content and mass exchange coefficient of loam soil were correlated with the zeolite application rate and reduced with an increase in the rate of applied zeolite. In a comparison between different soils at zeolite application rate of 8 g kg^?1, the immobile water contents of the zeolite-treated soil decreased by 57%, 60%, and 39% on sandy loam, loam, and clay loam soils, respectively, compared with the untreated soil. Furthermore, zeolite application could reduce mass exchange coefficient by 9%, 43%, and 21% on sandy loam, loam, and clay loam soils, respectively. A positive linear relationship was found between θ_im and α. Zeolite application increased real pore water velocity of sandy loam soil by 39% and 46% compared with loam and clay loam soils, respectively. In other studies there was a decrease in ammonium and nitrate leaching due to the zeolite application, and therefore, an increase in real pore water velocity due to zeolite application in sandy loam soil, as compared with the loam and clay loam soils, may not show more rapid movement of solute and agrichemicals to the groundwater.     

Critical Toxic Ranges of Chromium in Spinach Plants and in Soil

ABSTRACT

Long-term irrigation with untreated industrial sewage effluents causes accumulation of high concentrations of chromium (Cr) and other heavy metals in soil and subsequently in crop plants (especially leafy vegetables), which can be phytotoxic to plants and/or a health hazard to animals and humans. Greenhouse experiments were conducted to determine the effects of Cr application on the growth of spinach (Spinacia oleracia L.) and to develop critical toxic ranges of Cr in plants and in soil. The study involved growing of spinach variety ‘Punjab Green’ in a greenhouse on silty clay loam and sandy soils equilibrated with different levels of applied Cr (0, 1.25, 2.5, 5, 10, 20, 40, 80, 160, and 320 mg Cr kg^{? 1} soil). Plants were harvested at: three growth stages 45, 60, and 90 days after sowing (DAS). Critical toxic ranges were estimated by regressing and plotting data on ammoniumbicarbonate-diethylenetriaminepenta-acetic acid (AB-DTPA) extractable Cr in soil or Cr concentration in plants versus dry-matter yield (DMY) of spinach at the three growth stages. Toxic ranges, i.e., slightly toxic (80%–90%), moderately toxic (70%–80%), and extremely toxic (< 70%) in terms of DMY relative to the attainable maximum DMY, were established for both soils and for plants at all three growth stages. There was no germination of spinach with applied Cr at 320 mg Cr kg^{? 1} rate in silty clay loam soil and at 40 mg Cr kg^{? 1} rate in sandy soil due to Cr toxicity. Roots accumulated more Cr in comparison with shoots. Chromium concentrations of 0.47–1.93 mg Cr kg^{? 1} soil in silty clay loam soil, 0.13–0.94 mg Cr kg^{? 1} soil in sandy soil, 1.08–5.40 mg Cr kg^{? 1} plant DM in silty clay loam soil and 0.54–11.7 mg Cr kg^{? 1} plant DM in sandy soil were found to be toxic. The critical toxicity ranges of Cr thus established in this study could help in demarcating Cr toxicity in soils and in plants such as spinach and other leafy vegetables due to irrigation of soils with untreated sewage water contaminated with chromium.     

Effect of Soil Properties on Boron Adsorption and Release in Arid and Semi-Arid Benchmark Soils

The adsorption isotherms indicated that the adsorption of boron (B) increased with its increasing concentration in the equilibrium solution. The Langmuir adsorption isotherm was curvilinear and it was significant when the curves were resolved into two linear parts. The maximum value of adsorption maxima (b1) was observed to be 7.968 mg B kg^?1 in Garhi baghi soil and the bonding energy (k) constant was maximum at 0.509 L mg^?1 in Jodhpur ramana soil. The Langmuir isotherm best explains the adsorption phenomenon at low concentrations of the adsorbent, which of course was different for different soils. There was significant correlation between b1 and clay (r = 0.905**), organic matter contents (r = 0.734*), and cation exchange capacity (CEC; r = 0.995**) of soils. A linear relationship was observed in all the soils at all concentration ranges between 0 and 100 mg B L^?1, indicating that boron adsorption data conform to the Freundlich equation. Soils that have a higher affinity for boron adsorption, like Garhi baghi, tended to desorb less amount of boron, that is, 43.54%, whereas Ballowal saunkhari desorbed 48.00%, Jodhpur ramana 48.42%, and Naura soil 58.88% of the adsorbed boron. Boron desorption by these soils is positively and significantly correlated with the sand content (r = 0.714**) and negatively with clay content (r = ?0.502*) and CEC (r = ?0.623**). The maximum value of 37.59 mg kg^?1 for desorption maxima (Dm) was observed in Garhi baghi soil and also a constant related to B mobility (Kd) was found to be maximum in Garhi baghi (0.222 L kg^?1) soil Note: *P<0.05; ^**P<0.01.     

伴随阴离子对马铃薯种植冲击土中钾素固持与淋溶的影响

A column study was carried out to assess the influence of accompanying anions on potassium (K) leaching at potato growing sites with different soil textures (sandy loam and clay loam) in northwestern India. Potassium was applied in the top 15 cm layer of soil column at 30 and 60 mg K kg^-1 through different sources having different accompanying anions (Cl^-, SO₄^2-, NO₃^- and H₂PO₄^-). Maximum K was retained in the top 0--15 cm layer with a sharp decrease in K content occurring in 15--30 cm layer of the soil column. The trend was similar for both levels of applied K as well as frequency of leaching and soil type. The decrease of K content in soil column after four leaching events was maximum in case of Khanaura sandy loam, while only minor decrease was observed in Hundowal clay loam when K was applied at 60 mg K kg^-1, indicating higher potential of clay rich soil to adsorb K. In general, the K leaching in presence of the accompanying anions followed the order of SO₄^2- ≤ H₂PO₄^2- < NO₃^- = Cl^-. Highest 1 mol L^-1 CH3COONH4-extractable K was retained when K was applied along with SO42- and H2PO4- anions, and the least was retained when accompanying anion was Cl^-1. The influence of anions was more pronounced in the light textured soil and at high amounts of K application. Higher levels of K application resulted in higher losses of K, especially in sandy loam soil as observed from the leachate concentration. Among the different K sources, the maximum amount of K leaching was noticed in the soil column amended with KCl. After four leachings, the maximum amount of K leached out was 6.40 mg L^-1 in Hundowal clay loam and 9.29 mg L^-1 in Khanaura sandy loam at 60 mg K kg^-1 of soil application through KCl. These concentrations were lower than the recommended guideline of the World Health Organisation (12.00 mg L^-1).     

Soil Ammonium Diffusion Constraints Contribute to Large Differences in Nitrogen Supply to Rice in the Southern United States

This study was to determine if diffusion of soil ammonium may explain why many sandy soils have greater nitrogen (N)–supplying capacity to rice than clay soils. A laboratory procedure using transient-state methods measured the linear movement of soil ammonium (NH₄) in tubes packed with five field soils under aerobic conditions. Ammonium diffusion was measured by sectioning tubes after 48 h of equilibration and then measuring NH₄ by steam distillation. Effective diffusion coefficients, D_e, and NH₄ diffusion distance, d, per day ranged from D_e = 4.6 × 10^?5 cm² d^?1 and 1.5 cm d^?1 for Katy sandy loam to D_e = 2.9 × 10^?7 cm² d^?1 and 0.11 cm d^?1 for League clay. Ammonium diffusion distance d was strongly related to soil clay content and hence was predicted by d = Y × {[100/(% clay)] ? 1}, where Y is set to 0.1. Predicted d and measured d were highly related (R² = 0.99).     

Einfluß des Jahresniederschlags und der Bodenart auf die 137Cs-Tiefenverteilung in Böden Südchiles

The influence of mean annual rainfall and soil texture on the ¹³⁷Cs vertical distribution in soils from southern Chile The influence of mean annual rainfall and soil texture on the vertical distribution of ¹³⁷Cs from global fallout was studied in undisturbed volcanic ash soils from southern Chile. The areal concentration and translocation depth increase with the mean annual precipitation. In spite of the high rainfall at the sampled area (970 - 2500 mm a^?1), the highest ¹³⁷Cs contamination was found in the upper 10 cm layer. The vertical migration is reduced by the high adsorption capacity of these volcanic ash soils, but on the other side increased in soils with high large-pore volumen. The translocation depth reaches only up to 26 cm in the clay soils, 35 cm in the silty soils and 70 cm in the sandy soil.     

Potassium Leaching as Affected by Soil Texture and Residual Fertilization in Tropical Soils

Potassium (K) leaching is affected by soil texture and available K, among other factors. In this experiment, effects of soil texture and K availability on K distribution were studied in the presence of roots, with no excess water. Soils from two 6-year field experiments on a sandy clay loam and a clay soil fertilized yearly with 0, 60, 120, and 180 kg ha^?1 of K₂O were accommodated in pots that received 90 kg ha^?1 of K₂O. Soybean was grown up to its full bloom (R2). Under field conditions, K leaching below the arable layer increased with K rates, but the effect was less noticeable in the clay soil. Potassium leaching in a sandy clay loam soil was related to soil K contents from prior fertilizations. With no excess water, in the presence of soybean roots, K distribution in the profile was significant in the lighter textured soil but was not apparent on the heavier textured soil.     

Soil Shrinkage Characteristics as Affected by Solution Composition and Mineral Contents

Soil-shrinkage characteristics affect fluid transport and soil mechanical properties, with broad implications for environmental flows, crop production, and civil engineering designs. We quantified mild-saline-solutions effects on soil shrinkage curves and developed pedotransfer functions to predict curve parameters. Seven soil and soil mixes were equilibrated with solutions of 0.5-to-8 dS m^?1 and 0-to-20 sodium adsorption ratios (SAR). Saturated paste rods were dried; water contents and isotropic shrinkage measured. Texture affected shape-forming factors when clay and smectite contents were >260 and 140 g kg^?1, respectively. Solutions ≥2 dS m^?1 affected the coefficient of linear extensibility for smectitic soils containing clay ≥300 g kg^?1. Solution SAR affected only the highest clay content (530 g kg^?1) and mixed mineralogy soils. However, the solution salinity levels were not high enough to affect shape factors of the shrinkage curves. Pedotransfer functions successfully described soil shrinkage with root-mean-squared-errors 1 to 4 magnitudes lower than the highest measured values.     

Effect of Raw and NH4+-enriched Zeolite on Nitrogen Uptake by Wheat and Nitrogen Leaching in Soils with Different Textures

Leaching of nutrients in soil can change the surface and groundwater quality. The present study aimed at investigating the effects of raw and ammonium (NH₄⁺)-enriched zeolite on nitrogen leaching and wheat yields in sandy loam and clay loam soils. The treatments were one level of nitrogen; Z₀: (100 kg (N) ha^?1) as urea, two levels of raw zeolite; Z₁:(0.5 g kg^?1 + 100 kg ha^?1) and Z_2: (1 g kg^?1 + 100 kg ha^?1), and two levels of NH₄⁺-enriched zeolite; Z₃: (0.5 g kg^?1 + 80 kg ha^?1) and Z₄: (1 g kg^?1 + 60 kg ha^?1). Wheat grains were sown in pots and, after each irrigation event, the leachates were collected and their nitrate (NO₃^?) and NH₄⁺ contents were determined. The grain yield and the total N in plants were measured after four months of wheat growth. The results indicated that the amounts of NH₄⁺ and NO₃^? leached from the sandy loam soil were more than those from the clay loam soil in all irrigation events. The maximum and minimum concentrations of nitrogen in the drainage water for both soils were observed at control and NH₄⁺-zeolite treatments, respectively. Total N in the plants grown in the sandy loam was higher compared to plants grown in clay loam soil. Also, nitrogen uptake by plants in control and NH₄⁺-zeolite was higher than that of raw-zeolite treatments. The decrease in the amount of N leaching in the presence of NH₄⁺-zeolite caused more N availability for plants and increased the efficiency of nitrogen fertilizers and the plants yield.     

Sewage Sludge Application and Soil Properties Effects on Short-Term Zinc Leaching in Soil Columns

Eight soils from the Gulf of Kalloni in Lesvos Island, Greece, most of which were of low clay and low organic matter content, were used in a series of leaching experiments. The aim was to investigate the role of sewage sludge on Zn leaching and determine the soil properties that affect it. It was found that sludge addition at a low application rate (10 t ha^?1) decreased Zn leaching significantly by 30%. From a regression analysis it was found that eluted Zn was reduced with increasing Fe oxides content, probably due to Zn adsorption onto them, and that Zn transport increased with clay content. This indicates that Zn leaching was facilitated by the downward movement of clay particles, which was also suggested by the erratic Zn breakthrough observed in many soils. This was further confirmed by the fact that colloid concentrations increased with clay content in the soils (R?=?0.85, P?<?0.05). The results show that the addition of sewage sludge to low organic matter and clay content soils at moderate application rates enhances soil organic carbon and increases metal retention capacity.     

Phosphorus leaching from clay soils can be counteracted by structure liming

Two field experiments with drained plots on clay soils (60% and 25% clay) demonstrated a significant reduction in leaching of total phosphorus after application of structure lime. Aggregate stability was significantly improved. Phosphorus leaching in particulate form was significantly reduced following structure liming at the site with a very high clay content. Sites representing low (50 mg kg^?1) and high (140 mg kg^?1) levels of phosphorus extractable with acid ammonium lactate in topsoil displayed differing effects on leaching of dissolved reactive P (DRP). This form of phosphorus was only significantly reduced compared with the control at one site with high topsoil phosphorus status and relatively high (17–18%) degree of phosphorus saturation in the subsoil. Laboratory experiments with simulated rain events applied to topsoil lysimeters from the same site also demonstrated a significant reduction in leaching of DRP. These findings indicate that structure liming is an appropriate leaching mitigation measure on soils with both a high clay content and high soil phosphorus status.     

Clay amendment to sandy soil—effect of clay concentration and ped size on nutrient dynamics after residue addition

Purpose

Crop growth on sandy soils can be increased by claying. In modified sandy soils, the added clay is in the form of peds ranging in size from millimetres to centimetres creating a highly non-uniform matrix where ped size could influence nutrient availability and organic C binding. The aim of the study was to determine the effect of clay addition rate and ped size in residue amended sandy soil on soil respiration, nutrient availability and organic C retention.

Materials and methods

In this study, clay peds of 1, 2 or 3 mm size derived from a clay-rich Vertosol (73 % clay) were added to a sandy soil (3 % clay) at clay addition rates of 10 and 20 % w/w. After the addition of ground faba bean residue (C/N 37) at 10 g kg^?1, the soils were incubated for 45 days at 80 % of water-holding capacity.

Results and discussion

Clay addition had no consistent effect on cumulative respiration, but reduced NH₄ ⁺ availability with a greater reduction at 20 % compared to 10 % clay and with 1 and 2 mm compared to 3 mm peds. Sandy soil with clay peds had a greater maximum NH₄ ⁺ and P sorption capacity than sandy soil alone, and sorption capacity was higher at 20 % compared to 10 % clay addition and greater with 1 mm compared to 3 mm peds. Retrieval of clay peds at the end of the experiment showed ped breakdown during the experiment but also the formation of larger peds. Compared to the <53 μm fraction added at the start of the experiment, the total organic carbon (TOC) content of the <53 μm fraction was increased up to nearly two fold, particularly in the smaller peds (1 and 2 mm).

Conclusions

When sandy soils are amended with clay, N availability and organic C binding depend on both clay addition rate and ped size.

     

Plant Response to Copper Toxicity as Affected by Plant Species and Soil Type

ABSTRACT

A greenhouse experiment was conducted to determine the bioavailability of copper (Cu) in clay loam and sandy clay loam soil. Lettuce (Lactuca sativa) and spinach (Spinacia oleracea) were grown in pots for 45 d. When mature, plants were treated for 15 additional days with 0, 100, 250, 500, or 1000 mg Cu kg^?1 as CuSO₄·5H₂O. After harvest, Cu in soils and plant tissues was determined. In soils, applied Cu raised total and EDTA-extractible Cu. Results also revealed that the amounts of Cu extracted from sandy clay loam soil (80%) were higher than those extracted from clay loam soil (70%). In plants, increasing soil Cu concentration increased plant concentration of the metal. Plant species vary in their capacity for Cu accumulation: Lettuce has a relatively higher potential for Cu uptake and translocation than does spinach. Cu accumulation also differs among plant organs. In lettuce, metal accumulation is higher in roots than in shoots, where 60% to 80% of the total Cu of the plant is located in the roots. However, in spinach, there is no significant difference in Cu content between roots and shoots. The transfer of the metal from soil to plant is higher for plants grown on sandy clay loam soil. For a given rate of applied Cu, metal content in plant tissues is higher on sandy clay loam soil due to its higher transfer coefficient (C_T) from soil to plant. Nevertheless, all crops studied showed a positive linear relationship between extractible soil Cu and plant Cu.     

Crop yield and SOC responses to biochar application were dependent on soil texture and crop type in southern Quebec,Canada

Changes to soil nutrient availability and increases for crop yield and soil organic C (SOC) concentration on biochar‐amended soil under temperate climate conditions have only been reported in a few publications. The objective of this work was to determine if biochar application rates up to 20 Mg ha^?1 affect nutrient availability in soil, SOC stocks and yield of corn (Zea mays L.), soybean (Glycine max L.), and switchgrass (Panicum virgatum L.) on two coarse‐textured soils (loamy sand, sandy clay loam) in S Quebec, Canada. Data were collected from field experiments for a 3‐y period following application of pine wood biochar at rates of 0, 10, and 20 Mg ha^?1. For corn plots, at harvest 3 y after biochar application, 20 Mg biochar ha^?1 resulted in 41.2% lower soil NH on the loamy sand; the same effect was not present on the sandy clay loam soil. On the loamy sand, 20 Mg biochar ha^?1 increased corn yields by 14.2% compared to the control 3 y after application; the same effect was not present on the sandy clay loam soil. Biochar did not alter yield or nutrient availability in soil on soybean or switchgrass plots on either soil type. After 3 y, SOC concentration was 83 and 258% greater after 10 and 20 Mg ha^?1 biochar applications, respectively, than the control in sandy clay loam soil under switchgrass production. The same effect was not present on the sandy clay loam soil. A 67% higher SOC concentration was noted with biochar application at 20 Mg ha^?1 to sandy clay loam soil under corn.     

Salinity and sodicity affect soil respiration and dissolved organic matter dynamics differentially in soils varying in texture

The individual effects of salinity and sodicity on organic matter dynamics are well known but less is known about their interactive effects. We conducted a laboratory incubation experiment to assess soil respiration and dissolved organic matter (DOM) dynamics in response to salinity and sodicity in two soils of different texture. Two non-saline non-sodic soils (a sand and a sandy clay loam) were leached 3–4 times with solutions containing different concentrations of NaCl and CaCl₂ to reach almost identical electrical conductivity (EC_1:5) in both soils (EC_1:5 0.5, 1.3, 2.5 and 4.0 dS m^?1 in the sand and EC_1:5 0.7, 1.4, 2.5 and 4.0 dS m^?1 in the sandy clay loam) combined with two sodium absorption ratios: SAR < 3 and 20. Finely ground wheat straw residue was added (20 g kg^?1) as substrate to stimulate microbial activity. Cumulative respiration was more strongly affected by EC than by SAR. It decreased by 8% at EC 1.3 and by 60% at EC 4.0 in the sand, whereas EC had no effect on respiration in the sandy clay loam. The apparent differential sensitivity to EC in the two soils can be explained by their different water content and therefore, different osmotic potential at the same EC. At almost similar osmotic potential: ?2.92 MPa in sand (at EC 1.3) and ?2.76 MPa in the sandy clay loam (at EC 4.0) the relative decrease in respiration was similar (8–9%). Sodicity had little effect on cumulative respiration in the soils, but DOC, DON and specific ultra-violet absorbance (SUVA) were significantly higher at SAR 20 than at SAR < 3 in combination with low EC in both soils (EC 0.5 in the sand and EC 0.7 and 1.4 in the sandy clay loam). Therefore, high SAR in combination with low EC is likely to increase the risk of DOC and DON leaching in the salt-affected soils, which may lead to further soil degradation.     

Novel Fertilizer as an Alternative for Supplying Manganese and Boron to Soybeans

Soybean (Glycine max) commonly experience Mn deficiencies in the coarse-textured soils of Coastal Plain Virginia, especially under high pH conditions. The objective of this study was to investigate the ability of a novel coated fertilizer to provide Mn and B to soybeans in soils where Mn deficiency is common and B deficiency, although far less common than with Mn, is possible. A 60-d greenhouse experiment was conducted with three treatments: control, uncoated KCl, and Mn +B coated KCl applied to Bojac and Dragston sandy loams. Soil and whole plant tissue samples were collected throughout the experiment. Bojac and Dragston soils treated with the coated KCl contained 12.0 mg kg^?1 and 15.8 mg kg^?1 more Mehlich 1 – Mn, 21.7 mg kg^?1 and 23.0 mg kg^?1 more Mehlich 3 Mn, and 4.5 mg kg^?1 and 4.6 mg kg^?1 CaCl₂ – Mn than the control and uncoated KCl, respectively. Coated KCl increased above ground tissue Mn by 42.9 mg kg^?1 compared to the control and the uncoated KCl treatments in the Bojac soil, while the Dragston soil showed no significant differences in Mn tissue concentration between treatments. Above ground tissue, Mn was much lower in the Dragston soil than the Bojac, probably due to greater organic matter which chelates Mn keeping it less plant available. Boron concentrations did not differ in plant tissue or soil, regardless of the extraction method. Results indicate that the coated KCl product could consistently provide increased Mn concentration in acidic sandy soils despite varying levels of organic matter, but is not effective for B.     

Toxic Metal Removal from Polluted Soil by Acid Extraction

Sulfuric acid leaching is a promising technique to extract toxic metals from polluted soils. The objective of this study was to define the optimum sulfuric acid leaching conditions for decontamination of the fine particle fraction (<125???m) of an industrial soil polluted by Cd (16.8?mg?kg^?1), Cu (3,350?mg?kg^?1), Pb (631?mg?kg^?1) and Zn (3,010?mg?kg^?1). Batch leaching tests in Erlenmeyer shake flasks showed that a soil pulp pH between 1.5 and 2.0 using a solid concentration (SC) ranging from 5 to 20?% is adequate to efficiently solubilize toxic metals. Leaching tests performed at different temperatures (20, 40, 60 and 80?°C) also revealed that it is not beneficial to heat the soil suspension during the leaching treatment. The application in a 1-L stirred tank reactor of five consecutive 1-h leaching steps at 10?% SC and ambient temperature, followed by three water washings steps resulted in the following metal extraction yields: 30?% As, 90?% Cd, 43?% Co, 7?% Cr, 88?% Cu, 75?% Mn, 26?% Ni, 18?% Pb and 86?% Zn. The decontaminated soil conformed to Quebec norms for commercial and industrial use of soil.     

Downward Movement of Soil Cations in Highly Weathered Soils Caused by Addition of Gypsum

Abstract

Besides supplying calcium (Ca) and sulfur (S) to plants, gypsum has recently been used in agriculture to ameliorate some soil physical and chemical properties, especially to alleviate aluminum phytotoxicity in subsoils. When applied in large quantities, however, gypsum may leach significant amounts of nutrients from the plow layer. This study was conducted to assess the effect of gypsum addition to the soil on the magnitude of cation leaching as well as the relationship of leaching with some soil properties in a group of seven Brazilian soils. Rates of gypsum equivalents to 0, 5.0, 10, and 20 t ha^?1 (0, 2.5, 5.0, and 10 g kg^?1) were mixed with triplicate soil samples consisting of 3.0 kg of dry base soil. After 60 days of incubation at room temperature (15–25°C), the experimental units were packed into polyvinyl chloride leaching columns (32‐cm‐high×10 -cm-diameter) at a density of 0.9 g cm^?3. Thereafter, they were percolated once a week with a volume of distilled water equivalent to 1.5 times the total soil porosity over 11 weeks. Soil samples were collected before the first and after the last percolation, for chemical analysis. Averaged across soils, 11 percolation events leached about 26% of each Ca, magnesium (Mg), and potassium (K) from the treatment without gypsum. Averaged across soils and rates, addition of gypsum leached 41–94% of added Ca, 13–90% of exchangeable Mg, and 13–58% of exchangeable K, and the highest losses occurred on the sandiest soils. The relationship between soil parameters and Ca leaching varied with gypsum rate: in the treatments that received gypsum, leaching was negatively related to cation exchange capacity (CEC), clay, and organic matter, and positively correlated with sand; in the treatment with no gypsum, leaching correlated with the same parameters above, nevertheless, all coefficients presented opposite signs. Leaching of K caused by gypsum was negatively associated with clay and positively with sand, whereas leaching of Mg was poorly correlated with any soil parameter. Gypsum is a good source to promote high and fast downward movement of Ca in the soil profile, but rates must be cautiously chosen because of excessive leaching of Mg especially on soils with low CEC.     

Distribution of Forms of Copper and their Association with Soil Properties and Uptake in Major Soil Orders in Semi-arid Soils of Punjab,India

Profiles of semi-arid-zone soils in Punjab, northwestern India, were investigated for different forms of copper (Cu), including total Cu, diethylenetriaminepentaacetic acid (DTPA)–extractable Cu, soil solution plus exchangeable Cu, Cu adsorbed onto inorganic sites, Cu bound by organic sites, and Cu adsorbed onto oxide surfaces. When all soils were considered, total Cu content ranged from 7 to 37 mg kg^?1, while DTPA-extractable and soil solution plus exchangeable Cu contents ranged from 0.30 to 3.26 mg kg^?1 and from 0.02 to 0.43 mg kg^?1, respectively. Copper adsorbed onto inorganic sites ranged from 0.62 to 2.6 mg kg^?1 and that onto oxide surfaces ranged from 2.0 to 13.2 mg kg^?1. The Cu bound by organic sites ranged from 1.2 to 12.2 mg kg^?1. The magnitudes of different forms of Cu in soils did not exhibit any consistent pattern of distribution. Organic matter and size fractions (clay and silt) had a strong influence on the distribution of different forms of Cu. The content of all forms of Cu was generally greater in the fine-textured Alfisols and Inceptisols than coarse-textured Entisols. Soil solution plus exchangeable Cu, Cu held onto organic sites, and and Cu adsorbed onto inorganic sites (crystalline) had significant positive correlations with organic carbon and silt contents.The DTPA Cu was positively correlated with organic carbon, silt, and clay contents. Total Cu content strongly correlated with silt and clay contents of soils. Among the forms, Cu held on the organic site, water soluble + exchangeable Cu, and Cu adsorbed onto oxide surface were positively correlated with DTPA-extractable Cu. The DTPA-extractable Cu and soil solution plus exchangeable Cu seems to be good indices of Cu availability in soils and can be used for correction of Cu deficiency in the soils of the region. The uptake of Cu was greater in fine-textured Inceptisols and Alfisols than coarse-textured Entisols. Among the different forms only DTPA-extractable Cu was positively correlated with total uptake of Cu.