Fluxes and storage of fine-grained sediment and associated contaminants in the Na Borges River (Mallorca,Spain)

Samples of suspended and fine channel bed sediment were used to examine the spatial and temporal variability in the amount of fine-grained sediment and associated contaminants temporarily stored in the Na Borges River (319 km²) in Mallorca and the relationship of such channel storage to the fluxes of fine sediment and associated contaminant through the system. This Mediterranean groundwater-dominated river drains a predominantly agricultural catchment, although urbanisation during the twentieth century has changed the catchment hydrology. A re-suspension technique was used to obtain estimates of channel storage at monthly intervals during the 2004–2005 hydrological year at eight locations along the main stem of the stream (i.e. 26 km). The estimates of fine sediment storage ranged between 0 and 13,000 g m^− 2, with a mean value of 2400 g m^− 2. Only Cu exceeded the critical threshold (36 μg g^− 1), established by existing guidelines for the contaminant content of fluvial sediment. The results demonstrated significant spatial and temporal variability, in response to the influence of urban point sources, agricultural practises, seasonal groundwater interactions and the first-flush effect. The amount of fine sediment entering storage during the study period was 515.2 t, representing the net increase in storage over the study period. As a result, the mean specific storage was 21 t km^− 1. Suspended-sediment load and temporary fine sediment storage are the two basic components of the channel sediment budget that interact to determine sediment transport through a channel system, and they can therefore be used to compute the total input of sediment and associated contaminants to the system. Accordingly, storage values were compared with estimates of suspended sediment load and associated contaminant load values at three measuring stations along the river. During the study period, storage in the main channel system represented 87% of the sediment input and 68% of the contaminant input, indicating that deposition was more important than transport. The low gradient of the main channel and the low return period (i.e. 0–2.5 years) of the flood events that occurred during the study period meant that remobilised bed sediment and associated contaminants were redeposited downstream rather than being flushed to the catchment outlet as suspended sediment. Furthermore, the river bed is dry during the summer months, allowing sealing and crusting processes to stabilise the sediment deposited during the wet season and thereby reduce its availability for remobilisation at the beginning of the next wet season. Together, these factors promote sediment deposition and storage, with the result that sediment progressively accumulate over several hydrological years until a major flood event (i.e. return period ≈ 5 years) evacuates the stored sediment.     

Establishing a Holocene sediment budget for the river Dijle

A Holocene sediment budget was constructed for the 758 km² Dijle catchment in the Belgian loess belt, in order to understand long-term sediment dynamics. Hillslope sediment redistribution was calculated using soil profile information from 809 soil augerings, which was extrapolated to the entire catchment using morphometric classes. As large parts of the forests within the catchment prove to have undergone little or no erosion since medieval times, a correction was applied for the presence of forests. Total Holocene erosion amounts 817 ± 66 Mt for the catchment, of which 327 ± 34 Mt was deposited as colluvium. This corresponds with a net Holocene soil erosion rate of 10.8 ± 0.8 × 10³ Mg ha^− 1 for the entire Dijle catchment. Alluvial deposits were studied through 187 augerings spread over 17 cross-valley transects. The total alluvial sediment deposition equals 352 ± 11 Mt or 42% of total eroded sediment mass. Results indicate that at the scale of a medium-sized catchment the colluvial sediment sink is as important as the alluvial sediment sink and should not be neglected. As a result the estimation of erosion through alluvial storage and sediment export would yield large errors. Dating of sediment units show an important increase in alluvial deposition from medieval times onwards, indicating the important influence of agricultural activities that developed from that period. Mean sediment export rates from the catchment for the last 1000–1200 years range between 0.8 and 1.3 Mg ha^− 1 a^− 1 and are consistent with present suspended sediment measurements in the Dijle. Erosion for agricultural land for this period is 9.2 ± 2.2 Mg ha^− 1 a^− 1. Sediment budgets for the various tributary catchments provide an insight in the sources and sinks of sediment at different scales within the catchment.     

Baseflow control on sediment flux connectivity: Insights from a nested catchment study in Central Mexico

In order to assess the extent of sediment connectivity between uplands and lowlands and to quantify the processes of in-channel deposition and remobilization, measurements of suspended sediment fluxes were conducted in a nested rural catchment of the Mexican Volcanic Belt. Data were collected over one year at three upland sites (3 to 12 km²) and two downstream stations (390–630 km²). Our results show that a structural discontinuity in the catchment (i.e. abrupt slope decrease at the junction between piedmonts and the alluvial plain from 2 to 10% to < 0.1%) could be compensated by functional continuity during floods. Direct conveyance of fine sediment to the outlet occurred when a high stream transport capacity was reached. Erosion of the streambed was observed on various occasions and accounted for up to 50% of the flux leaving the catchment during one event. Conversely, temporary in-channel storage was apparent on other occasions, amounting to up to 52% of the flux recorded upstream during one storm. These two distinct behaviours were approximately equally distributed along the rainy season and strongly driven by the extent of coupling between surface and subsurface water. This work indeed highlights the role of baseflow spatial variations in determining the extent of lowland sediment conveyance. Riverbed erosional processes occurred when large differences in pre-event baseflow values (i.e. at least a twofold longitudinal increase) were observed between the 5-km distant lowland stations. Our findings outline the importance of systematically taking into consideration the baseflow parameter in research focusing on fine sediment transport across scales.     

Natural and anthropogenic controls on soil erosion in the Internal Betic Cordillera (southeast Spain)

Soil erosion in southeast Spain is a complex process due to strong interactions between biophysical and human components. Significant progress has been achieved in the understanding of soil hydrological behavior, despite the fact that most investigations were focused on the experimental plot scale. Although experimental plots allow exploring the effect of multiple biophysical and anthropogenic factors, they provide limited insights in the combined effect of all factors acting together at the landscape scale. In this study, area-specific sediment yields (SSY) have been estimated based on the volume of sediment trapped behind 36 check dams in the southeast of Spain. Low SSY-values were reported (mean = 1.40 t ha⁻¹ year⁻¹: median = 0.61 t ha⁻¹ year⁻¹). SSY variability could be explained for 67% by catchment characteristics such as drainage area, soil characteristics, land cover, average catchment slope, and annual rainfall. The low SSY values are probably caused by the agricultural abandonment that occurred over the past decades and allowed the recovery of natural vegetation. Furthermore, our results suggest that the soils have eroded in the past to such an extent that nowadays not much sediment is detached by overland flow due to residual enrichment of clay and stones. Also, sediment is to a large extent trapped locally in the catchment, as indicated by the negative relationship between SSY and catchment area.     

Simulating badland erosion with KINEROS2 in a small Mediterranean mountain basin (Vallcebre,Eastern Pyrenees)

The Ca l?Isard catchment (1.32 km²), a sub-basin of the Vallcebre experimental catchments, yields large amounts of sediments (about 580 Mg km^− 2 year^− 1) that are produced in relatively small but very active eroded areas (badlands). Several lines of evidence suggest that there is a delay between sediment production, caused by intense summer rainstorms, and sediment transport, occasioned by the main floods produced by large precipitation events following wet antecedent conditions. First, a calibration–validation exercise was carried out with sediment yield data obtained using containers provided with slot divisors in a badlands micro-catchment (1240 m²). Then, the model was applied to the main badlands areas in the Ca l?Isard sub-catchment for a 4-year period and the simulated sediment yields were compared with the records at the gauging station. The test was performed with the Generalized Likelihood Uncertainty Estimation (GLUE) approach for assessing the uncertainty associated with model predictions, which assumes that many parameter sets can give acceptable simulations. The results demonstrated the capacity of KINEROS2 to simulate badland erosion, although it showed limited robustness. A clear temporal mismatch between erosion and sediment transport and the relevance of sediment stores in the catchment were confirmed, while the total weights of sediment were generally under-predicted. The limited suitability of the area used for calibration or the role of sediment sources not simulated in the approach may account for this shortcoming.     

Evaluating gully erosion using Cs and Pb/Cs ratio in a reservoir catchment

Water erosion in the hilly areas of west China is the main process contributing to the overall sediment of the Yellow River and the Yangtze River. The impact of gully erosion in total sediment output has been mostly neglected. Our objective was to assess the sediment production and sediment sources at both the hillslope and catchment scales in the Yangjuangou reservoir catchment of the Chinese Loess Plateau, northwest China. Distribution patterns in sediment production caused by water erosion on hills and gully slopes under different land use types were assessed using the fallout ¹³⁷Cs technique. The total sediment production from the catchment was estimated by using the sediment record in a reservoir. Sediment sources and dominant water erosion processes were determined by comparing ¹³⁷Cs activities and ²¹⁰Pb/¹³⁷Cs ratios in surface soils and sub-surface soils with those of sediment deposits from the reservoir at the outlet of the catchment. Results indicated that landscape location had the most significant impact on sediment production for cultivated hillslopes, followed by the terraced hillslope, and the least for the vegetated hillslope. Sediment production increased in the following order: top>upper>lower>middle for the cultivated hillslope, and top>lower>upper>middle for the terraced hillslope. The mean value of sediment production declined by 49% for the terraced hillslope and by 80% for the vegetated hillslope compared with the cultivated hillslope. Vegetated gully slope reduced the sediment production by 38% compared with the cultivated gully slope. These data demonstrate the effectiveness of terracing and perennial vegetation cover in controlling sediment delivery at a hillslope scale. Averaged ¹³⁷Cs activities and ²¹⁰Pb/¹³⁷Cs ratios in the 0–5 cm surface soil (2.22–4.70 Bq kg⁻¹ and 20.70–22.07, respectively) and in the 5–30 cm subsoil (2.60 Bq kg⁻¹ and 28.57, respectively) on the cultivated hills and gully slopes were close to those of the deposited sediment in the reservoir (3.37 Bq kg⁻¹ and 29.08, respectively). These results suggest that the main sediment sources in the catchment were from the surface soil and subsoil on the cultivated slopes, and that gully erosion is the dominant water erosion process contributing sediment in the study area. Changes in land use types can greatly affect sediment production from gully erosion. An increase in grassland and forestland by 42%, and a corresponding decrease in farmland by 46%, reduced sediment production by 31% in the catchment.     

Long-term biogenic soil mixing and transport in a hilly,loess-mantled landscape: Blue Mountains of southeastern Washington

In soil-mantled landscapes, downslope sediment transport occurs via disturbance-driven processes that vary with climate and vegetation change. To help constrain the long-term (? 10 yr) pattern and rate of soil mixing and transport in forests, we analyzed the distribution of tephra grains in soil along a hillslope transect in the Blue Mountains, SE Washington. Deposited within a loess mantle, tephra associated with Mt. Mazama (7.7 cal. kyr B.P.) serves as a marker bed for estimating erosion and transport rates. Moving downslope, the buried tephra horizon is progressively exhumed and becomes increasingly mixed in the upper soil layer, reflecting disturbance and transport via tree root growth and turnover. This pattern also implies increasing erosion rates downslope and our hillslope transect becomes increasingly convex coincident with progressive exhumation of the tephra layer. This systematic correspondence between topographic form, specifically, local convexity, and surface lowering is consistent with theoretical models for which soil transport rates depend on slope inclination. From our analysis, calibrated coefficients for a linear, slope-dependent transport model are on the order of 10^− 3 m²yr^− 1, consistent with previous work in forested loess-mantled landscapes. In addition, our results reveal both the high degree of soil mixing over millennial timescales and the local variability of mixing in forested landscapes. Furthermore, the results enable us to quantify the amount of energy expended by trees in mixing and transporting soil and the net sediment transport fraction of the net primary productivity NPP of the ecosystem.     

Bioturbation on wildfire-affected southeast Australian hillslopes: Spatial and temporal variation

The importance of bioturbation as an agent of soil and geomorphological change is well known but few observations have been made of spatial and temporal variations in bioturbation rates. We quantified variations in surface bioturbation by ants (particularly Aphaenogaster longiceps) and vertebrates in the sandstone terrain of the Blue Mountains, southeast Australia. Following wildfire during the period late 2001–early 2002, we monitored thirty-three 5 m² plots positioned in six different slope units and in two catchments affected by different wildfire severities. Measurements were made seasonally for six years. Overall, mean rates of ant mounding and surface scraping by vertebrates were similar (246 ± 339 g m^− 2 yr^− 1 and 274 ± 179 g m^− 2 yr^− 1, respectively). However, rates varied substantially according to slope unit, showing a marked maximum for both ant mounding and total bioturbation on footslopes. Possible reasons for this spatial variation are discussed. A complex response to various soil and ecological factors such as soil texture, soil moisture and vegetation patterns is the most likely explanation. Associated estimates of topsoil (0–30 cm depth) turnover times, based on ant mounding rates alone, ranged from 300 to 100,000 years for different slope units. In contrast to previous findings, wildfire severity did not seem to affect bioturbation, possibly because of ant survival in deep nests and spatial patchiness of fire severity. There was likewise no clear link between temporal changes in bioturbation and fire severity; high rates in the first two years after wildfire were followed by lower rates for all burn severity types. There was also seasonal variability that was not directly related to rainfall. The results substantiate the importance of bioturbation in modifying soil characteristics and influencing soil erosion, especially following a major disturbance event like wildfire.     

Runoff and soil erosion from areas of burnt scrub: comparison of experimental results with those predicted by the WEPP model

The effects of burning on runoff and soil erosion from scrub-bearing hillslopes in northwest Spain were investigated by monitoring of experimental plots over a 4-year period. At the beginning of this period, two plots (BP1 and BP2) were subjected to low-intensity controlled burns, and two plots left as controls; in the year following the controlled burns, however, one of the control plots (plot WF) was burnt in a wildfire of higher intensity than the controlled burns. Runoff and erosion losses from the BP plots were only slightly higher than from the control plot, with the loss in no case exceeding 300 g m⁻² yr⁻¹. Erosion losses from plot WF were considerably higher (1314 g m⁻² over the 1st year post-burning, 8.5 times higher than from the control plot). These results were compared with those predicted using the Water Erosion Prediction Project (WEPP) hillslope model (Version 95.7). In general, WEPP predictions of total runoff volume over the study period were acceptable: coefficients of determination for the regression of predicted on observed values were 0.41, 0.68, 0.66 and 0.57 for the control plot and plots BP1, BP2 and WF, respectively. Erosion losses were likewise predicted with reasonable accuracy, though the model showed a consistent tendency to under-estimate, particularly with plot WF.     

Determining the effects of wildfire on sediment sources using 137Cs and unsupported 210Pb: the role of landscape disturbances and driving forces

Purpose

Wildfires represent one of the major natural disturbances within forested landscapes and have potential implications for the quality and function of downstream aquatic ecosystems. This study aimed to determine if a wildfire in a mountainous, forested watershed in British Columbia, Canada, caused a change in the dominant sediment source in the immediate 1?C2?years following the wildfire, and if the sediment sources changed over the medium term (3?C7?years) as the landscape recovered.

Materials and methods

Source materials (surface soil, subsurface soil and channel bank material) and fluvial (suspended and channel bed) sediment samples were collected over the period 2004 to 2010 from a watershed burnt by a wildfire in 2003, and from an adjacent watershed that was not impacted by the fire. Samples were analysed for the fallout radionuclides (FRNs) caesium-137 (¹³⁷Cs) and unsupported lead-210 (²¹⁰Pb_un). An unmixing model was used to calculate the relative source contributions of the fluvial sediment samples.

Results and discussion

¹³⁷Cs and ²¹⁰Pb_un were concentrated in the upper layers of surface soils in both watersheds and were statistically different to concentrations in subsurface and channel bank material. In the burnt watershed, FRN concentrations were greatest in the ash layer. Sediment sources as determined by the unmixing model were 100?% subsurface/channel bank material in the unburnt watershed, while in the burnt watershed 8.5?±?2.5?% was derived from surface soils. In both watersheds, there were no major changes in the relative contributions from surface soil and from subsurface/channel bank material over the period 2004 to 2010. Thus, while the wildfire did cause a change in sediment sources, it was fairly subtle and did not conform to the effects following wildfire described for other studies in contrasting environments, which typically document a major increase in hillslope contributions relative to channel bank sources.

Conclusions

There was a limited response in terms of fine-grained sediment sources (and also sediment fluxes) in the burnt watershed. The reason for this muted response to a severe wildfire is likely to be the lack of precipitation, especially winter precipitation and the associated snowmelt, in the first year following the wildfire. Thus while the landscape was primed for erosion and sediment transport, the lack of a driving force meant that there was a limited immediate post-fire sediment response.