Formation of new protein structures in heated mixtures of BSA and alpha-lactalbumin

The heat-induced protein-protein interactions of alpha-lactalbumin (alpha-La) and bovine serum albumin (BSA), dispersed in a pH 6.8, 10% whey protein concentrates (WPC) permeate, were followed using alkaline and sodium dodecyl sulfate (SDS) 1D and 2D polyacrylamide gel electrophoresis (PAGE) and size-exclusion high-performance liquid chromatography (SE-HPLC). Heated (75 degrees C) 5% BSA solution contained large disulfide-bonded BSA aggregates, although some monomer BSA (SDS-monomeric BSA) could be dissociated from the aggregates by SDS. In contrast, similarly heated alpha-La solutions contained small quantities of several monomeric forms of alpha-La and dimeric alpha-La but no large aggregates. When 10% solutions of 1:1 (w/w) mixtures of alpha-La and BSA were heated, large disulfide-bonded aggregates and SDS-monomeric BSA and alpha-La were present. However, heated 2% mixtures contained more modified alpha-La monomers, alpha-La-dimers, and alpha-La-trimers, fewer large disulfide-bonded aggregates, and less SDS-monomeric alpha-La or BSA. These results suggest that BSA forms disulfide-bonded aggregates that contain available thiol groups that can catalyze the formation of differently structured alpha-La monomers, dimers, higher polymers, and adducts of alpha-La with BSA.     

Behavior of protein in the presence of calcium during heating of whey protein concentrate solutions

The effect of added CaCl(2) on heat-induced changes in whey protein (WP) solutions prepared from whey protein isolate (WP1), acid whey protein concentrate (WP2), and cheese whey protein concentrate (WP3) was investigated. The loss of native-like, proteins, aggregation, and gel firmness of WP were maximum at certain levels of added CaCl(2). These levels were different for different WP products. The effect of added CaCl(2) on these changes appeared to be related to the initial calcium concentrations of these solutions. The higher the calcium content of the product, the less available sites for added CaCl(2) to bind. It was considered that addition of CaCl(2) changed the types of protein interactions that formed the protein aggregates during heating. Added calcium caused dramatic decreases in fracture stress of WP gels due to the formation of large protein aggregates.     

Effects of caseins on thermal stability of bovine beta-lactoglobulin

Casein fractions have been shown to act as molecular chaperones and inhibit aggregation of whey proteins in dilute solutions (< or =1% w/v). We evaluated if this approach would stabilize protein solutions at higher concentration and thermal processing temperatures desired for beverage applications. Mixtures of beta-lactoglobulin (BLG) (6% w/v) with either beta-casein (BCN) (0.01-2% w/v) or alpha s-casein (ACN) (2% w/v) were adjusted to pH 6.0 and heated (70-90 degrees C) for 20 min, cooled, and then analyzed to determine the degree of aggregation. Aggregation was determined by solution turbidity as optical density (OD) at 400 or 600 nm. The addition of 0.05% (w/v) BCN or greater caused a drop in turbidity for solutions heated at 70-90 degrees C. In contrast, inhibition was observed in BLG-ACN mixtures at 70 degrees C but not at > or =75 degrees C. Moreover, prolonged heating (90 min) of BLG with 2% (w/v) BCN (pH 6.0) at 90 degrees C produced a clear solution while BLG-ACN solutions formed translucent gels after heating for 15 min. The weight-averaged molar mass and root-mean-square (rms) radius of soluble aggregates were determined by size exclusion chromatography in conjunction with multiangle laser light scattering (SEC-MALS). SEC-MALS confirmed the turbidity results by showing that the BLG-BCN mixture (8% w/v protein) produced aggregates with lower molar mass and smaller rms radius (majority 20-40 nm). These results showed that BCN is a feasible component to stabilize higher concentrations of whey proteins in beverages.     

Enhancement of the foaming properties of protein dried in the presence of trehalose

Surface tension, foamability, and foam stability kinetics have been measured for the pure proteins bovine serum albumin (BSA) and beta-lactoglobulin, before and after aqueous solutions of the proteins had been subjected to different drying conditions, and also for whey protein concentrate (WPC). Pure proteins were air-dried, at 78 or 88 degrees C, in the presence and absence of sucrose or trehalose, at a mass ratio of 5:1 sugar/protein. WPC was spray-dried in the presence of various sugars: trehalose, sucrose, lactose, and lactitol. Spray-drying WPC without sugars resulted in a dramatic decrease in the foam stability, whereas drying in the presence of sugars gave better retention of the original foaming properties. Trehalose in particular resulted in almost complete retention of the foam stability observed for the nondried WPC. Pure beta-lactoglobulin showed similar behavior, but trehalose did not seem to afford the same protection to BSA.     

Pressure-induced unfolding and aggregation of the proteins in whey protein concentrate solutions

Whey protein concentrate solutions (12% w/v, pH 6.65 +/- 0.05) were pressure treated at 800 MPa for 20-120 min and then examined using size exclusion chromatography (SEC), small deformation rheology, transmission electron microscopy, and various types of one-dimensional (1D) and two-dimensional (2D) polyacrylamide gel electrophoresis (PAGE). The pressure-treated samples showed a time-dependent loss of native whey proteins by SEC and 1D PAGE and a corresponding increase in non-native proteins and protein aggregates of different sizes. These aggregates altered the viscosity and opacity of the samples and were shown to be cross-linked by intermolecular disulfide bonds and by noncovalent interactions using 1D PAGE [alkaline (or native), sodium dodecyl sulfate (SDS), and SDS of reduced samples (SDS(R))] and 2D PAGE (native:SDS and SDS:SDS(R)). The sensitivity of the major whey proteins to pressure was in the order beta-lactoglobulin B (beta-LG B) > beta-LG A > bovine serum albumin (BSA) > alpha-lactalbumin (alpha-LA), and the large internal hydrophobic cavity of beta-LG may have been partially responsible for its sensitivity to high-pressure treatments. It seemed likely that, at 800 MPa, the formation of a beta-LG disulfide-bonded network preceded the formation of disulfide bonds between alpha-LA or BSA and beta-LG to form multiprotein aggregates, possibly because the disulfide bonds of alpha-LA and BSA are less exposed than those of beta-LG either during or after pressure treatment. It may be possible that intermolecular disulfide bond formation occurred at high pressure and that hydrophobic association became important after the high-pressure treatment.     

Control of heat-induced aggregation of whey proteins using casein

The ability of alphas1/beta-casein and micellar casein to protect whey proteins from heat-induced aggregation/precipitation reactions and therefore control their functional behavior was examined. Complete suppression (>99%) of heat-induced aggregation of 0.5% (w/w) whey protein isolate (pH 6.0, 85 degrees C, 10 min) was achieved at a ratio of 1:0.1 (w/w) of whey protein isolate (WPI) to alphas1/beta-casein, giving an effective molar ratio of 1:0.15, at 50% whey protein denaturation. However, in the presence of 100 mM NaCl, heating of the WPI/alphas1/beta-casein dispersions to 85 degrees C for 10 min resulted in precipitation between pH 6 and 5.35. WPI heated with micellar casein in simulated milk ultrafiltrate was stable to precipitation at pH>5.4. Protein particle size and turbidity significantly (P相似文献   

Moisture-induced aggregation of whey proteins in a protein/buffer model system

Moisture-induced protein aggregation in a dry or intermediate-moisture food matrix can contribute to the loss of product acceptability. The present study evaluated the molecular mechanisms and controlling factors for moisture-induced whey protein aggregation in a premixed protein/buffer model system. Insoluble aggregates rapidly formed during the first 3 days of storage at 35 degrees C with a slower rate afterward. Evaluation of the insoluble aggregates by solubility tests in solutions containing SDS/urea/guanidine HCl/dithiothreitol and gel electrophoresis showed that the formation of intermolecular disulfide bonds was the main mechanism for protein aggregation, and all major whey proteins were involved in the formation of insoluble aggregates. Effects of various factors on aggregation were also investigated, including moisture content, medium pH, and the addition of NaCl. The dependence of aggregation on moisture content was bell-shaped, and the maximal extent of aggregation was achieved at a moisture content of around 70-80% on a dry weight basis.     

Uniaxial compression of thermal gels based on microfluidized blends of WPI and heat-denatured WPI.

The effect of heat-denatured whey protein isolate (dWPI)/whey protein isolate (WPI) ratio (0-0.6), microfluidization pressure (0-1000 bar), and number of passes (1-10) on the uniaxial shear stress at 10% (sigma(10)) and 80% (sigma(80)) relative deformation of dWPI/WPI heat-induced gels (14% total protein, w/w) was studied. No correlation between the average diameter of aggregates and the dWPI/WPI ratio, microfluidization pressure, or number of passes was found. However, increasing the microfluidization pressure or the number of passes resulted in a narrower size distribution of aggregates. Increasing the dWPI/WPI ratio and the number of passes resulted in a decrease and an increase of gel hardness, respectively. The results were interpreted in terms of more random aggregation/gelation of proteins in the presence of aggregates that could result in localized heterogeneities into gels and more dissipation of the deformation energy during compression. The positive effect of the number of passes on the gel hardness was also considered to be due to a more homogeneous aggregation/gelation of proteins in the presence of smaller aggregates.     

Effects of heat and high hydrostatic pressure treatments on disulfide bonding interchanges among the proteins in skim milk

Traditionally, milk has been heat treated to control microorganisms and to alter its functionality, for example, to increase its heat stability. Pressure treatment has been considered as a possible alternative for microorganism control, but some of the functionality-related milk protein interactions have not been explored. The present study used two novel two-dimensional polyacrylamide gel electrophoresis (2D PAGE) methods to explore the differences in the irreversible disulfide bond changes among the milk proteins after four common heat treatments and after 30-min pressure treatments of milk at 200, 400, 600, and 800 MPa at ambient temperature (22 degrees C). The pasteurizing heat treatment (72 degrees C for 15 s) denatured and aggregated only a few minor whey proteins, but the high heat treatments (100 degrees C for 120 s, 120 degrees C for 120 s, and 140 degrees C for 5 s) formed disulfide-bonded aggregates that included a high proportion of all of the whey proteins and kappa-casein (kappa-CN) and a proportion of the alpha(s2)-CN. Pressure treatment of milk at 200 MPa caused beta-lactoglobulin (beta-LG) to form disulfide-bonded dimers and incorporated beta-LG into aggregates, probably disulfide-bonded to kappa-CN. The other whey proteins appeared to be less affected at 200 MPa for 30 min. In contrast, pressure treatment at 800 MPa incorporated beta-LG and most of the minor whey proteins, as well as kappa-CN and much of the alpha(s2)-CN, into aggregates. The accessibility of alpha(s2)-CN and formation of complexes involving alpha(s2)-CN, kappa-CN, and whey proteins in the pressure treated milk is an important novel finding. However, only some of the alpha-lactalbumin was denatured or incorporated into the large aggregates. These and other results show that the differences between the stabilities of the proteins and the accessibilities of the disulfide bonds of the proteins at high temperature or pressure affect the formation pathways that give the differences among the resultant aggregates, the sizes of the aggregates, and the product functionalities.     

Hydrophobicity of whey protein concentrates measured by fluorescence quenching and its relation with surface functional properties

Surface hydrophobicity of whey protein concentrate (WPC) under heated (85 degrees C for 5, 10, 20, 30, 40, and 60 min) and unheated conditions was measured using cis-parinaric acid (CPA), 1-anilino-8-naphthalenesulfonate (ANS), and a fluorescence quenching method using acrylamide as a quencher. This last method evaluates the degree of exposure of tryptophanyl residues in proteins to the solvent. The initial slope of Stern-Volmer plots, K(app), was used as an index of protein hydrophobicity. Surface hydrophobicity of WPC exhibited good relation with surface functional properties such as emulsifying and foaming. Analysis of the data obtained in this work showed that the fluorescence quenching method gave results similar to those obtained using CPA and ANS. Therefore, this simple technique is satisfactory in effectively obtaining information about the hydrophobicity of whey proteins.     

Heat-induced changes in the ultrasonic properties of whey proteins

The physical aggregation of commercial whey protein isolate (WPI) and purified beta-lactoglobulin was studied by ultrasound spectroscopy. Protein samples were dialyzed to achieve constant ionic strength backgrounds of 0.01 and 0.1 NaCl, and gelation was induced in situ at constant temperatures (from 50 to 75 degrees C) or with a temperature ramp from 20 to 85 degrees C. Changes in the ultrasonic properties were shown in the early stages of heating, at temperatures below those reported for protein denaturation. During heating, the relative ultrasound velocity (defined as the difference between sample velocity and reference velocity) decreased continuously with temperature, indicating a rearrangement of the hydration layer of the protein and an increase in compressibility of the protein shell. At temperatures <50 degrees C the ultrasonic attenuation decreased, and <65 degrees C both velocity and attenuation differentials showed increasing values. A sharp decrease in the relative velocity and an increase in the attenuation at 70 degrees C were indications of "classical" protein denaturation and the formation of a gel network. Values of attenuation were significantly different between samples prepared with 0.01 and 0.1 M NaCl, although no difference was shown in the overall ultrasonic behavior. WPI and beta-lactoglobulin showed similar ultrasonic properties during heating, but some differences were noted in the values of attenuation of WPI solutions, which may relate to a less homogeneous distribution of aggregates caused by the presence of alpha-lactalbumin and other minor proteins in WPI.     

Glucose slows down the heat-induced aggregation of β-lactoglobulin at neutral pH

The behavior of β-lactoglobulin (β-Lg) during heat treatments depends on the environmental conditions. The influence of the presence or absence of a reducing sugar, namely, glucose, on the modification of the protein during heating has been studied using fluorescence, polyacrylamide gel electrophoresis (PAGE), size-exclusion chromatography (SEC), and transmission electron microscopy. Glycated products were formed during heating 24 h at 90 °C and pH 7. The fluorescence results revealed an accumulation of the advanced Maillard products and the formation of aggregates during heating. PAGE and SEC data suggested that the products in the control samples were essentially composed of covalently linked fibrillar aggregates and that their formation was faster than that for glycated samples. We showed that glucose affected the growing step of covalent aggregates but not the initial denaturation/aggregation step of native protein. Glucose-modified proteins formed a mixture of short fibrils and polydisperse aggregates. Our results revealed that β-Lg forms fibrils at neutral pH after heating and that glucose slows the formation of these fibrils.     

Interaction between β-casein and whey proteins as a function of pH and salt concentration

The effectiveness of β-casein as a chaperone in the aggregation of whey proteins was investigated. β-Casein altered heat-induced aggregation as shown by a reduction in turbidity of β-lactoglobulin, α-lactalbumin, and bovine serum albumin (BSA) solutions. The pH of the mixtures greatly affected how much β-casein reduced the turbidity of the solutions; the maximum reductions in turbidity were observed at pH 6.0. Reducing the pH decreased the effectiveness of β-casein as a chaperone. An increase in ionic strength by the addition of NaCl or CaCl(2) also decreased the effectiveness of the chaperone. The addition of CaCl(2) had a larger effect than the addition of NaCl. The chaperone effect was seen at temperatures up to 145 °C. Differential scanning calorimetry (DSC) showed that β-casein did not alter the denaturation temperature of β-lactoglobulin. The kinetics curves for loss of native protein and turbidity development showed that β-casein did not function by slowing the aggregation process. It was concluded that β-casein competes with whey protein in the aggregate process and the aggregates formed in the presence of β-casein are smaller in size than those formed during whey protein self-aggregation. The formation of smaller aggregates gives rise to less turbid, more soluble protein solutions.     

Cross-linking and rheological changes of whey proteins treated with microbial transglutaminase

Modification of the functionality of whey proteins using microbial transglutaminase (TGase) has been the subject of recent studies. However, changes in rheological properties of whey proteins as affected by extensive cross-linking with TGase are not well studied. The factors affecting cross-linking of whey protein isolate (WPI) using both soluble and immobilized TGase were examined, and the rheological properties of the modified proteins were characterized. The enzyme was immobilized on aminopropyl glass beads (CPG-3000) by selective adsorption of the biotinylated enzyme on avidin that had been previously immobilized. WPI (4 and 8% w/w) in deionized water, pH 7.5, containing 10 mM dithiothreitol was cross-linked using enzyme/substrate ratios of 0.12-10 units of activity/g WPI. The reaction was carried out in a jacketed bioreactor for 8 h at 40 degrees C with continuous circulation. The gel point temperature of WPI solutions treated with 0.12 unit of immobilized TGase/g was slightly decreased, but the gel strength was unaffected. However, increasing the enzyme/substrate ratio resulted in extensive cross-linking of WPI that was manifested by increases in apparent viscosity and changes in the gelation properties. For example, using 10 units of soluble TGase/g resulted in extensive cross-linking of alpha-lactalbumin and beta-lactoglobulin in WPI, as evidenced by SDS-PAGE and Western blotting results. Interestingly, the gelling point of WPI solutions increased from 68 to 94 degrees C after a 4-h reaction, and the gel strength was drastically decreased (lower storage modulus, G'). Thus, extensive intra- and interchain cross-linking probably caused formation of polymers that were too large for effective network development. These results suggest that a process could be developed to produce heat-stable whey proteins for various food applications.     

Structural changes imposed on whey proteins by UV irradiation in a continuous UV light reactor

The objective of this study was to investigate the structural changes of whey proteins during exposure in a continuous-flow UV reactor. Varying UV irradiation dosages were obtained by controlling the flow rate and the mixing speed. Whey protein isolate (WPI) solutions at concentrations of 1% and 5% (w/v) were circulated at flow rates ranging from 30 to 800 mL·min(-1), and changes in physicochemical properties of the proteins were investigated. Intrinsic fluorescence spectra and surface hydrophobicity measurements suggested changes in the tertiary structure of the proteins with UV exposure. The UV treatment also increased the concentration of total and accessible thiol groups in 1% WPI solutions, while no change was measured in 5% WPI solutions. Size-exclusion chromatography demonstrated the formation of UV-induced aggregates and oxidation products (N-formylkynurenine and dityrosine) of aromatic amino acids. Furthermore, the UV-induced changes in protein conformation increased the susceptibility of whey proteins to pepsin hydrolysis.     

Role of the soluble and micelle-bound heat-induced protein aggregates on network formation in acid skim milk gels

Gel formation was monitored by low amplitude rheometry during acidification at 40 degrees C with 1.5% glucono-delta-lactone in combined milk systems containing soluble and/or micelle-bound heat-induced (95 degrees C/10 min) aggregates of denatured whey proteins and kappa-casein and in heated dairy mixes with varying micellar casein/whey protein ratio (CN/WP). Both soluble and micelle-bound aggregates increased gelation pH and gel strength. Micelle-bound aggregates seemed to modify the micelle surface so that micelles were destabilized at a pH of 5.1 (instead of 4.7), while soluble aggregates precipitated at their calculated pI of approximately 5.3, and initiated an early gelation by interacting with the micelles. Decreasing the CN/WP ratio produced larger aggregates with higher whey protein: kappa-casein ratio, which gave more elastic gels. The specific effects of the micellar and soluble aggregates on gel strength are discussed with respect to their relative proportions in the heated milk.     

Aggregation properties of whey protein hydrolysates generated with Bacillus licheniformis proteinase activities

Hydrolysis of whey protein concentrate (WPC) with Alcalase 2.4 L, a Bacillus licheniformis proteinase preparation, induces gelation. The aggregation behavior of WPC hydrolysates generated with Alcalase and Prolyve 1000, a Bacillus licheniformis proteinase that did not induce gelation, were studied by turbidity and particle size analysis. With the use of synthetic peptide substrates, it was shown that Alcalase contains a glutamyl endopeptidase (GE) activity not present in Prolyve. Comparison of the aggregation behavior of WPC hydrolysates generated with Alcalase, Prolyve, and combinations of Prolyve with a GE activity isolated from Alcalase showed that GE was responsible for the observed enzyme-induced peptide aggregation in Alcalase hydrolysates. Hydrolysates generated with Prolyve, having a degree of hydrolysis (DH) of 11.8% and 10.4% of peptide material greater than 10 kDa, could be induced to aggregate by the addition of GE. These results emphasize the contribution of enzyme specificity to the physicochemical and functional characteristics of proteinase hydrolysates of WPC.     

Delipidation of a whey protein concentrate by electroacidification with bipolar membranes

The separation of residual fats from whey protein concentrates (WPC) results in a better nutritional and functional utilization of this product. Bipolar membrane electroacidification (BMEA) technology allows acidification and demineralization of solutions without any salt addition. The principle of BMEA is based on proton formation from water molecule dissociation at the bipolar membrane interface. The objective of this work was to determine the effect of an electroacidification treatment at pH 4.5 on the precipitation of lipids. WPC electroacidification was carried out with or without preliminary demineralization by conventional electrodialysis. The effect of ionic strength on lipid precipitation rates was also evaluated by dilution of the WPC samples. Lipid precipitation levels of 35-39% were obtained using the electroacidification process without a dilution step, while the combination of BMEA and dilution of the WPC resulted in a decrease in lipid content by six-fold from 0.76 to 0.21%.     

Limited enzymatic treatment of skim milk using chymosin affects the micelle/serum distribution of the heat-induced whey protein/kappa-casein aggregates

The effects of heat treatment and limited kappa-casein hydrolysis on the micelle/serum distribution of the heat-induced whey protein/kappa-casein aggregates were investigated as a possible explanation for the gelation properties of combined rennet and acid gels. Reconstituted skim milk was submitted to combinations of 0-67% hydrolysis of the kappa-casein at 5 degrees C and heat treatment at 90 degrees C for 10 min. The protein composition of the ultracentrifugal fractions was obtained by reverse-phase high-performance liquid chromatography (RP-HPLC). The aggregates contained in each phase were isolated by size-exclusion chromatography and analyzed by RP-HPLC and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Upon heating only, 20-30% of the total kappa-casein dissociated, while 20-30% of the total whey protein attached to the micelles. When heated milk was renneted, little changes were observed in the distribution and composition of the aggregates. Conversely, the heat treatment of partially renneted milk induced the formation of essentially micelle-bound aggregates. The results were discussed in terms of the preferred interaction between hydrophobic para-kappa-casein and denatured whey proteins.     

Preparation and characterization of beta-carotene nanodispersions prepared by solvent displacement technique

This work demonstrated the preparation of protein-stabilized beta-carotene nanodispersions using the solvent displacement technique. The emulsifying performance of sodium caseinate (SC), whey protein concentrate (WPC), whey protein isolate (WPI), and a whey protein hydrolysate (WPH, 18% degree of hydrolysis) was compared in terms of particle size and zeta-potential of the nanodispersions. SC-stabilized nanodispersions exhibited a bimodal particle size distribution: large particles (stabilized by casein micelles) with a mean particle size of 171 nm and small particles (stabilized by casein submicelles) of 13 nm. This was confirmed with transmission electron microscopy analysis. Most of the beta-carotene precipitated (87.6%) was stabilized in the small particles. On the other hand, the nanodispersions stabilized by the whey proteins were polydispersed with larger mean particle sizes. The mean particle size of WPC and WPI was 1730 and 201 nm, respectively. The SC-stabilized nanodispersion was expected to be more stable as indicated by its higher absolute zeta-potential value (-31 mV) compared to that of WPC (-15 mV) and WPI (-16 mV). Partially hydrolyzed whey protein possessed improved emulsifying properties as shown by WPH-stabilized samples. It was interesting to note that increasing the SC concentration from 0.05 to 0.5 wt % increased the particle size of beta-carotene stabilized by casein micelles, while the reverse was true for those stabilized by SC submicelles. Microfluidization at 100 MPa of SC solution dissociated the casein micelles, resulting in a decrease in mean particle size of the casein micelle-stabilized particles when the SC solution was used to prepare nanodispersions. The results from this work showed that protein-stabilized beta-carotene nanodispersions could be prepared using the solvent displacement technique.