Potential of Triticale as a Substitute for Wheat in Flour Tortilla Production

The potential of triticale as a partial or total substitute for wheat in flour tortilla production was evaluated. Different mixtures of triticale and wheat flours were tested in a typical hot‐press formulation. Both grains yielded similar amounts of flour. Wheat flour contained 1.5% more crude protein, 1.6× more gluten, and produced stronger dough than triticale. Triticale flour significantly reduced optimum water absorption and mix time of blends. Flour tortillas with 100% triticale absorbed 8% less water and required 25% of the mix time of the control wheat flour tortilla. The yield of triticale tortillas was lower than the rest of the tortillas due to lower moisture content and water absorption. Triticale dough balls required less proofing and ruptured during hot pressing, thus producing defective tortillas. The 50:50 flour mixture produced doughs with acceptable rheological properties and good quality tortillas. Addition of 1% vital gluten to the 75:25 triticale‐wheat flour mix or 2% to the 100% triticale flour significantly increased water absorption and mix time and improved dough properties and tortilla yields. Textural studies indicated that increasing levels of triticale flour reduced the force required to rupture tortillas. For all tortilla systems, rupture force gradually increased, and extensibility decreased during seven days of storage at room temperature; the highest rate of change occurred during the first day. Sensory evaluation tests indicated that triticale could substitute for 50% of wheat flour without affecting texture, color, flavor, and overall acceptability of tortillas. For production of 100% triticale flour tortillas, at least 2% vital gluten had to be added to the formulation.     

Generation of a Mixolab Profile After the Evaluation of the Functionality of Different Commercial Wheat Flours for Hot‐Press Tortilla Production

Refined wheat flours commercially produced by five different U.S. and Mexican wheat blends intended for tortilla production were tested for quality and then processed into tortillas through the hot‐press forming procedure. Tortilla‐making qualities of the flour samples were evaluated during dough handling, hot pressing, baking, and the first five days on the shelf at room temperature. The predominant variables that affected the flour tortilla performance were wet gluten content, alveograph W (220–303) and P/L (0.70–0.94) parameters, farinograph water absorption (57%) and stability (10.8–18.7 min), starch damage (5.43–6.71%), and size distribution curves (uniform particle distribution). Flours produced from a blend of Dark Northern Spring (80%) and Mexican Rayon (20%) wheat had the highest water absorption, and tortillas obtained from this blend showed the highest diameter and lowest thickness. The whitest and best textured tortillas were obtained from the flour milled from three hard types of Mexican wheat blend. A Mixolab profile was generated from the best tortilla flours, those produced by mills 3 and 4. The Mixolab profile showed that a good flour for hot‐press tortillas had a relatively lower absorption and short dough mix time compared with a bread flour and should have a significantly higher gluten compared with an all‐purpose flour. Compared with bread flour, the tortilla flour had higher retrogradation and viscosity values. The Mixolab profile proved to be a good preliminary test to evaluate flours for hot‐press tortillas.     

Role of Gluten in Flour Tortilla Staling

Effects of protease and transglutaminase (TG) on dough and tortilla microstructures, shelf‐stability, and protein profile were determined to infer the role of gluten in tortilla staling. Control and enzyme‐treated tortillas were prepared using a standard bake test procedure and evaluated for three weeks. Confocal micrographs of control dough showed thin protein strands forming a continuous web‐like matrix. Protease‐treated dough had pieces of proteins in place of the continuous matrix, while TG‐treated dough had thicker protein strands that were heterogeneously distributed. Control tortillas had a well‐distributed continuous protein structure. Protease‐treated tortilla had a continuous structure despite being composed of hydrolyzed proteins in the dough, while the TG‐treated tortilla retained clumps of proteins. Both treatments resulted in shorter shelf‐stability of tortillas. An evenly distributed and moderately stronger gluten network is necessary for longer retention of tortilla flexibility. Solubility of protein fractions differed among treatments, but molecular weight distribution did not differentiate control and treated dough or tortillas. The proportion of each protein fraction appears to affect staling.     

Effect of Flour Extraction Rate on White and Red Winter Wheat Flour Compositions and Tortilla Texture

Wheat flours commercially produced at 74, 80, and 100% extraction rates made from hard white winter wheat (WWF) and hard red winter wheat (WRF) were used to produce tortillas at a commercial-scale level. Flour characteristics for moisture, dry gluten, protein, ash, sedimentation volume, falling number, starch damage, and particle-size distribution were obtained. Farinograms and alveograms were also obtained for flour-water dough. A typical northern Mexican formula was used in the laboratory to test the tortilla-making properties of the flours. Then commercial-scale tortilla-baking trials were run on each flour. The baked tortillas were stored at room and refrigeration temperatures for 0, 1, 2, and 3 days. Maximum stress and rollability were measured every day. Tortilla moisture, color, diameter, weight, and thickness were measured for each treatment. Finally, tortilla acceptability was tested by an untrained sensory panel. Analyses of variance (ANOVA) were performed on the data. WWF had higher protein content, dry gluten, sedimentation volume, and water absorption than the WRF. The WWF was the strongest flour based on farinograph development time and alveograph deformation work. It also produced the most extensible dough measured with the alveograph (P/L). Flour protein and ash contents, water absorption, and tenacity increased directly with the flour extraction rate. Both WWF and WRF performed well in commercial-scale baking trials of tortillas. Tortillas made with both types of flours at 74 and 80% extraction rates had the best firmness and rollability. However, tortillas made with WWF 80% had the best color (highest L value). Tortillas prepared with 100% extraction rate flour were also well accepted by the sensory panel, had good textural characteristics, and became only slightly firm and slightly less rollable after three days of storage at room temperature.     

Use of near-isogenic wheat lines to determine the glutenin composition and functionality requirements for flour tortillas

In wheat ( Triticum aestivum L), the synthesis of high molecular weight (HMW) glutenins (GS) is controlled by three heterologous genetic loci present on the long arms of group 1 wheat chromosomes. The loci Glu-A1, Glu-B1, and Glu-D1 and their allelic variants play important roles in the functional properties of wheat flour. This study focused on understanding the functionality of these protein subunits on tortilla quality. Near-isogenic wheat lines in which one or more of these loci were absent or deleted were used. Tortillas were prepared from each deletion line and the parent lines. The elimination of certain HMW-GS alleles alter distinct but critical aspects of tortilla quality such as diameter, shelf stability, and overall quality. Two deletion lines possessing HMW-GS 17 + 18 at Glu-B1 and deletions in Glu-A1 and Glu-D1 had significantly larger tortilla diameters, yet tortilla shelf life was compromised or unchanged from the parent lines used to develop the deletion lines or the commercial tortilla flour used as a control. Alternatively, a deletion line possessing Glu-A1 and Glu-D1 (HMW-GS 1, 5 + 10) and a deletion in Glu-B1 also significantly improved tortilla diameters. Whereas the increase in diameter was less than the line possessing only HMW-GS 17 + 18 at Glu-B1, the stability of the tortillas were, however, maintained and improved as compared to the parent lines containing a full compliment of HMW-GS. Thus, the presence of subunits 5 + 10 at Glu-D1 alone or in combination with subunit 1 at Glu-A1 appears to provide a compromise of improvement in dough extensibility for improved tortilla diameters while also providing sufficient gluten strength to maintain ideal shelf stability.     

Effect of Cross‐Linked Resistant Starch on Wheat Tortilla Quality

Resistant starch (RS) ingredients are an attractive option to increase dietary fiber in baked products. This study determined the effect of two forms of cross‐linked and pregelatinized cross‐linked RS, Fibersym‐RW (Fsym) or FiberRite‐RW (FRite), respectively, from wheat on dough and tortilla quality and acceptability. Refined wheat tortillas with 0% (control) to 15% RS (flour basis) were made using a standard baking process. Tortillas with 100% whole white wheat were also made. Physical and rheological properties of dough and tortillas, and sensory profile of tortillas were evaluated. Dough with whole wheat and 15% FRite were significantly harder and less extensible than the control dough; this was related to high water absorption of these doughs. Tortillas with whole wheat and 10–15% FRite were less puffed and denser than the control; however these levels of FRite significantly increased tortilla weight (by up to 6.2%). Dough and tortillas with Fsym were comparable to the control. Dietary fiber (g/100 g, db) increased from 2.8 ± 0.3 in control to 14.3 ± 0.5 and 13.6 ± 0.5 in 15% Fsym and 15% FRite tortillas, respectively. Tortillas with whole wheat were less acceptable than the control in appearance, flavor, and texture, while tortillas with 15% Fsym had higher overall acceptability than the control. Incorporation of 15% cross‐linked wheat RS to increase tortilla dietary fiber is feasible without negatively affecting dough handling and tortilla quality.     

Wheat Tortilla Quality: Impact of Amylose Content Adjustments Using Waxy Wheat Flour

Amylose content is closely related to wheat flour pasting or thermal properties, and thus affects final food qualities. Fourteen flour blends with amylose content ranges of <1 to 29% were used to study tortilla production and quality parameters. Reduced amylose contents decreased dough stickiness and pliability; low amylose doughs were also very smooth in appearance. Very low flour amylose content was associated with earlier tortilla puffing and poor machinability during baking, darker color, low opacity, larger diameters, and reduced flexibility after storage. Tortilla texture analysis indicated that lowering amylose content gave fresh tortillas higher extensibility; after three or more days storage, however, low amylose flours required more force to break the tortillas and the rupture distances became shorter. These results, as reflected in covariate analysis, were not significantly affected by the flour blend's protein content, swelling volume/power, SDS‐sedimentation volume, mixograph dough development time, or mixograph tolerance score. Based on our observation of an initial increase in extensibility with reduced‐amylose tortillas, adding 10–20% waxy flour into wild‐type flours should be ideal for restaurant (on‐site) tortilla production or circumstances where tortillas are consumed shortly (within a day) after production. The optimal flour amylose content for hot‐press wheat tortilla products is 24–26%.     

Effects of Leavening Acids and Dough Temperature in Wheat Flour Tortillas

Functionality of four leavening acids (sodium aluminum phosphate [SALP], sodium aluminum sulfate [SAS], monocalcium phosphate [MCP] and sodium acid pyrophosphate [SAPP‐28]) was evaluated during processing of wheat flour tortillas. Formulas were optimized to yield opaque, large‐diameter tortillas with pH 5.9–6.1. Each leavening acid and sodium bicarbonate was first evaluated at 38°C and then evaluated in combination with fumaric acid at 34 and 38°C. Ionic and pH interactions of leavening salts adversely affected dough properties and resting time. Opacity and pH of tortillas prepared with MCP was lower than for other treatments. Higher dough temperature required more leavening acid and base to compensate for some of the loss of CO₂ incurred during dough mixing and resting at 38°C. The addition of fumaric acid decreased the amount of leavening acid, the dough‐resting time and tortilla pH, and improved storage stability. Combinations of MCP, SALP (or SAS), and fumaric acid produced dough and tortillas with good qualities. Tortillas prepared using SALP (or SAS) and fumaric acid tended to be of better quality.     

Effect of Different Wheat Classes and Their Flour Milling Streams on Textural Properties of Flour Tortillas

Wheat flour tortillas were made from flour streams of three wheat cultivars: Jagger hard red winter wheat, 4AT-9900 hard white winter wheat, and Ernie soft red winter wheat. Wheat samples were milled on a Miag experimental mill. Twelve flour streams and one straight-grade flour were obtained. Tortillas were made from each flour stream and the straightgrade flour by the hot-press method. Tortilla stretchability and foldability were evaluated by a texture analyzer and six panelists, respectively. Flour protein and water absorption affected tortilla texture. The foldability evaluated by panelists was positively correlated with flour protein content, farinograph water absorption, and damaged starch (P < 0.05). The 2BK and 3BK streams of hard wheat produced tortillas with strong stretchability and good foldability. Middling streams of hard wheat yielded tortillas with lighter color and less stretchability. Under the conditions tested in this study, soft wheat flours were not good for producing flour tortillas.     

Effects of Wheat Starch and Gluten on Tortilla Texture

Wheat starches were isolated from three wheat flours. Two vital wheat glutens, one from a commercial source and another one isolated from straight-grade flour, were combined with wheat starches to form reconstituted flours with a protein level of 10%. Several characteristics of tortillas made with the hot-press method were measured. No significant difference (P < 0.05) occurred in texture of tortillas made with hard wheat gluten and soft wheat gluten. Wheat starches did not have any significant (P < 0.05) effect on tortilla stretchability or foldability. Analysis of variance confirmed that wheat starch and gluten had limited effects on tortilla texture. The possible reasons were that the solubles of wheat flour were not included, and the shortening in the tortilla formula interfered with the interaction of gluten and starch.     

Effect of Partial Waxy Wheat on Processing and Quality of Wheat Flour Tortillas

The processing and quality of wheat flour tortillas prepared with partial waxy and normal flour were evaluated. Control procedures and formula were utilized with water absorption varied to obtain machineable doughs. Amylose content was lower in most partial waxy compared with normal wheats. The type of wheat starch did not affect most dough properties or tortilla diameter. Tortilla height and opacity were adversely affected by the decreased amount of amylose in partial waxy wheats. Sufficient leavening reactions occurred early in baking (after 10 sec) to yield an opaque disk, but some baked tortillas lost opacity and become partially transparent after baking. Starch gelatinizes, disperses, and retrogrades concurrently with the leavening reaction during the short (<30 sec) baking time. Amylose functionality during baking and cooling appears to be involved in the retention of air bubbles in tortillas.     

Evaluation of the Functionality of Five Different Soybean Proteins in Hot‐Press Wheat Flour Tortillas

Five different soybean protein sources were added to wheat flour to increase the protein content by 15–25%, and the resulting composite flours were optimally processed into hot‐press tortillas in a pilot plant. The rheological properties of composite flours were evaluated with the farinograph, alveograph, and other wheat quality tests. Tortilla‐making qualities of the control and soybean‐fortified flours were evaluated during dough handling, hot pressing, and baking. The resulting tortillas were tested in terms of yield, physical and chemical parameters, sensory properties, color, and objective and subjective texture. The soybean‐fortified tortillas had increased yields because of the higher dough water absorption and enhanced essential amino acid scores. Among the five different soybean proteins, the defatted soybean flour (SBM1) with the lowest fat absorption index and protein dispersibility index (PDI) and the soybean concentrate produced the best fortified tortillas. The protein meals with high PDI and relatively lower water absorption index (SBM3 and SBM4) produced sticky doughs, lower alveograph P/L values, and defective tortillas. All soybean proteins produced higher yields of tortillas with an enhanced protein quality and amount of dietary fiber.     

Qualitative Effect of Added Gluten on Dough Properties and Quality of Chinese Steamed Bread

Glutens isolated from 15 soft red winter (SRW) wheat flours were added into a SRW wheat flour to obtain protein levels of 9.6 and 11.3% for determination of the qualitative effect of added gluten on the dough properties and quality of northern‐style Chinese steamed bread (CSB). Sodium dodecyl sulfate sedimentation (SDSS) volume of the gluten source flour exhibited positive relationships with mixograph absorption, midline peak time (MPT), and midline peak value (MPV) of the gluten‐added flours and with surface smoothness, crumb structure, and total score of CSB prepared from the gluten‐added flours regardless of protein content. Positive correlations were also observed between SDSS volume of the gluten source flour and specific volume and stress relaxation score of CSB prepared from the gluten‐added flours of 11.3% protein. The increase in protein content from 9.6 to 11.3% by gluten addition raised mixograph absorption, MPT, and MPV but had no apparent effect on resistance breakdown, dough maximum force for extension, and extensibility, and it increased CSB specific volume and crumb structure score without affecting surface smoothness, stress relaxation, and total score. Mixograph parameters exhibited significant relationships with CSB total score, indicating that they could be effective predictors of the CSB‐making quality of flours.     

Mechanical Starch Damage Effects on Wheat Flour Tortilla Texture

To investigate the effects of mechanically damaged starch and flour particle size on the texture of fresh and stored flour tortillas, two commercial hard red winter wheat flour samples were reground four times using decreasing roll gaps. Tortillas were made with a modified hot‐press procedure. Texture characteristics were measured after tortillas were stored 2 hr (fresh tortilla), 2 days, and 4 days. Damaged starch and particle size significantly affected (P < 0.05) flour water absorption, dough extensibility and resistance, and dough viscosity. As damaged starch increased and particle size decreased, the flour tortillas became less stretchable, the maximum force of Kramer shear decreased, and firmness and rollability increased. The effects of damaged starch and particle size on stretchability and Kramer shear were greater in fresh tortillas than in stored tortillas and became smaller as the storage time increased. However, the effects of damaged starch and particle size on rollability and firmness were smaller in fresh tortillas than in stored tortillas but became greater as the storage time increased.     

Technological and Nutritional Properties of Flours and Tortillas from Nixtamalized and Extruded Quality Protein Maize (Zea mays L.)

Nixtamalized and extruded flours from quality protein maize (QPM, V‐537C) and tortillas made from them were evaluated for some technological and nutritional properties and compared with the commercial brand MASECA. Both QPM flours showed higher (P < 0.05) protein content, total color difference, pH, available lysine, and lower (P < 0.05) total starch content, Hunter L value, water absorption index, gelatinization enthalpy, resistant starch, and retrograded resistant starch than nixtamalized MASECA flour. Tortillas from nixtamalized and extruded QPM flours had higher contents of essential amino acids than tortillas from MASECA flour, except for leucine. Tortillas from processed QPM flours also showed higher (P < 0.05) values of the nutritional indicators calculated protein efficiency ratio (C‐PER 1.80–1.85 vs. 1.04), apparent and true in vivo protein digestibility (78.4‐79.1 vs. 75.6% and 76.4–77.4 vs. 74.2%, respectively), PER (2.30–2.43 vs. 1.31), net protein retention (NPR; 2.88–2.89 vs. 2.11), and protein digestibility corrected amino acid score (PDCAAS; 54–55 vs. 29% based on preschool children and 100 vs. 85% based on adults) than MASECA flour. The use of QPM for flour and tortilla preparation may have a positive effect on the nutritional status of people from countries where these products are widely consumed.     

Effect of High‐Molecular‐Weight Glutenin Subunit Allelic Composition on Wheat Flour Tortilla Quality

Wheat cultivars possessing quality attributes needed to produce optimum quality tortillas have not been identified. This study investigated the effect of variations in high‐molecular‐weight glutenin subunits encoded at the Glu‐1 loci (Glu‐A1, Glu‐B1, and Glu‐D1) on dough properties and tortilla quality. Flour protein profiles, dough texture, and tortilla physical quality attributes were evaluated. Deletion at Glu‐D1 resulted in reduced insoluble polymeric protein content of flour, reduced dough compression force, and large dough extensibility. These properties produced very large tortillas (181 mm diameter) compared with a control made with commercial tortilla wheat flour (161 mm). Presence of a 7 + 9 allelic pair at Glu‐B1 increased dough strength (largest compression force, reduced extensibility, and small‐diameter tortillas). Deletion at Glu‐A1 produced large tortillas (173 mm) but with unacceptable flexibility during storage (score <3.0 at day 16). In general, presence of 2* at Glu‐A1, in combination with 5 + 10 at Glu‐D1, produced small‐diameter tortillas that required large force to rupture (tough texture). Presence of 2 + 12 alleles instead of 5 + 10 at Glu‐D1 produced tortillas with a good compromise between diameter (>165 mm) and flexibility during storage (>3.0 at day 16). These allele combinations, along with deletion at Glu‐D1, show promise for tortilla wheat development.     

Folate Stability in Folic Acid Enriched Corn Masa Flour,Tortillas, and Tortilla Chips over the Expected Shelf Life

Neural tube defects occur at higher rates in Hispanic populations in the United States. Such populations would benefit from folic acid fortification of corn masa flour (CMF). This study evaluated folate stability in fortified CMFs and tortillas and tortilla chips made therefrom. There was no significant loss of folate during the six‐month shelf life of fortified tortilla CMF and tortilla chip CMF. There was a 13% loss (P < 0.05) of folate during tortilla baking and no loss during tortilla chip frying. Both tortillas and tortilla chips showed significant folate losses over the two‐month shelf life for these products, with a 17% loss in fortified tortillas and a 9% loss in tortilla chips. Folate in fortified CMFs, tortillas, and tortilla chips is relatively stable and comparable to the stability of folate in wheat flour and breads.     

Formation of Homopolymers and Heteropolymers Between Wheat Flour and Several Protein Sources by Transglutaminase‐Catalyzed Cross‐Linking

The effect of different protein sources (soy flour, lupin flour, egg albumin, gelatin powder, protein‐rich beer yeast flour) on wheat dough functionality was tested by determining gluten index, texture properties, and thermomechanical parameters. Transglutaminase (TG) was also added to improve the dough functionality by forming cross‐links. The presence of protein sources had a significant effect on the gluten index, with the exception of lupin flour. Gelatin and the presence of TG resulted in significant single effects on the texture properties of the wheat‐protein dough. All the protein sources significantly modified the mixing characteristics of the dough or the thermal behavior. Capillary electrophoresis studies of the water‐soluble, salt‐soluble, and glutenin proteins indicated that interactions were mainly within proteins, thus homologous polymers. Scanning electron microscopy studies of the doughs made from blends of wheat and protein sources doughs supported the formation of heterologous structures in the wheat‐lupin blends. The combination of TG and lupin would be a promising method to be used on the treatment of insect‐damaged or weak flours, to increase the gluten strength.     

Combining Maltogenic Amylase with CMC or Wheat Gluten to Prevent Amylopectin Recrystallization and Delay Corn Tortilla Staling

Antistaling properties of a bacterial maltogenic amylase, sodium carboxymethylcellulose (CMC), and vital wheat gluten on quality of corn tortillas were evaluated during 14 days of storage. Amylopectin recrystallization was the driving force behind the staling of corn tortillas. Increasing levels of recrystallized amylopectin measured by differential scanning calorimetry (DSC) correlated significantly with increased tortilla stiffness (r = 0.43) and reduction in tortilla pliability (r = ‐0.42) during storage. Maltogenic amylase (275–1,650 activity units) made tortillas less stiff but did not preserve pliability and extensibility as effectively as CMC (0.25–0.5%). The combination of 825 MANU of maltogenic amylase (to interfere with intragranular amylopectin recrystallization) and 0.25% CMC (to create a more flexible intergranular matrix than retrograded amylose and amylopectin) produced less stiff, equally flexible, and less chewy tortillas than did 0.5% CMC. Vital wheat gluten was not as effective as CMC in preserving tortilla flexibility or as good as the maltogenic amylase in reducing stiffness. Further research is required to optimize the addition of maltogenic amylases in continuous processing lines that use fresh masa instead of nixtamalized corn flour (NCF) and to determine how these amylases interfere with amylopectin recrystallization.     

Effects of Oat Grain Hydrothermal Treatments on Wheat-Oat Flour Dough Properties and Breadbaking Quality

Hydrothermal treatments, which are routine in oat processing, have profound effects on oat flour dough rheological properties. The influence of roasting and steam treatments of oat grain on dough mixing and breadbaking properties was investigated when hydrothermally treated oat flour was blended with wheat flour. Roasting of oat grain (105°C, 2 hr) resulted in oat flours that were highly detrimental to wheat flour dough mixing properties and breadbaking quality. Steaming (105°C, 20 min) or a combination of roasting and steaming of oat grain significantly improved the breadbaking potential of the oat flours. The addition of oat flours increased water absorption and mixing requirements of the wheat flour dough and also decreased bread loaf volume. However, at the 10% substitution level, steamed oat flours exhibited only a gluten dilution effect on bread loaf volume when wheat starch was used as a reference. Oat flour in the breadbaking system decreased the retrogradation rate of bread crumb starch. The results indicate that adequate hydrothermal treatments of oat grain are necessary for oat flour breadbaking applications. Steamed oat flours used at a 10% level retarded bread staling without adversely affecting the loaf volume.