Evaluation of Rice and Wheat Cultivars for Tolerance to Salinity and Sodicity in Soil

The large genotypic variation for salt tolerance in rice and wheat is the driving force behind efforts to identify appropriate cultivars for salt‐prone environments where large variations in salinity (electrical conductivity, EC) and sodicity (sodium adsorption ratio, SAR) levels exist. An evaluation of the commonly grown rice and wheat cultivars at different EC/SAR ratios may thus help in coping with the crop failures on salt‐affected soils. Accordingly, we evaluated some salt‐tolerant cultivars of rice and wheat for growth and yield at different soil salinity and sodicity levels in a sandy clay loam soil. Among the cultivars tested, rice ‘SSRI‐8’ produced the highest productive tillers and paddy yield, and wheat cultivar ‘SIS‐32’ produced the highest tillers and grain and straw yields. The high EC/SAR ratios proved more hazardous for rice than for wheat. Irrespective of the varieties tested, the highest levels of EC and SAR (T₅ and T₆) caused significant reduction in paddy yield, whereas at the lowest levels of EC and SAR (T₁ and T₂), paddy yield was not affected significantly when compared with the control. However, in case of wheat crop, all the levels [i.e., the lowest (T₁ and T₂), medium (T₃ and T₄), and the highest (T₅ and T₆) of EC and SAR tested] affected wheat yield adversely with significant differences. For both the crops, there were little or no differences in yield between the two ratios tested (i.e., 1:2 and 1:4) at all the levels of EC and SAR.     

Effects of foliar spray of two kinds of zinc oxide on the growth and ion concentration of sunflower cultivars under salt stress

This study investigated the effects of foliar application of normal and nano-sized zinc oxide on the response of sunflower cultivars to salinity. Treatments included five cultivars (‘Alstar’, ‘Olsion’, ‘Yourflor’, ‘Hysun36’ and ‘Hysun33’), two salinity levels [0 and 100 mM sodium chloride (NaCl)], and three levels of fertilizer application. Fertilizer treatments were the foliar application of normal and nano-sized zinc oxide (ZnO). Foliar application of ZnO in either forms increased leaf area, shoot dry weight, net carbon dioxide (CO₂) assimilation rate (A), sub-stomatal CO₂ concentration (Ci), chlorophyll content, Fv/Fm, and Zn content and decreased Na content in leaves. The extent of increase in chlorophyll content, Fv/Fm and shoot weight was greater as nano-sized ZnO was applied to the normal form. The results show that the nano-sized particles of ZnO compared to normal form has greater effect on biomass production of sunflower plants.     

Effects of Organic and Inorganic Fertilizers on Soil and Plant Nutrients and Yields of Pearl Millet and Wheat under Semi-arid Inceptisols in India

A study was conducted to assess fertilizer effect on pearl millet–wheat yield and plant-soil nutrients with the following treatments: T₁, control; T₂, 100% nitrogen (N); T₃, 100% nitrogen and phosphorus (NP); T₄, 100% nitrogen, phosphorus and potassium (NPK); T₅, 100% NPK + zinc sulfate (ZnSO₄) at 25 kg ha^?1; T₆, 100% NPK + farmyard manure (FYM) at 10 t ha^?1; T₇, 100% NPK+ verimcompost (VC) at 2.5 tha^?1; T₈, 100% NPK + sulfur (S) at 25 kg ha^?1; T₉, FYM at 10 t ha^?1; T₁₀, VC at 2.5 t ha^?1; T₁₁, 100% NPK + FYM at 10 t ha^?1 + 25 kg S ha^?1 + ZnSO₄ at 25 kg ha^?1; and T₁₂, 150% NPK treatments. Treatments differed significantly in influencing soil-plant nutrients and grain and straw yields of both crops. Grain yield had significant correlation with soil-plant N, P, K, S, and zinc (Zn) nutrients. The study indicated superiority of T₁₁ for attaining maximum pearl millet grain yield (2885 kg ha^?1) and straw yield (7185 kg ha^?1); amounts of N (48.9 kg ha^?1), P (8.8 kg ha^?1), K (26.3 kg ha^?1), S (20.6 kg ha^?1), and Zn (0.09 kg ha^?1) taken up; and amounts of soil N (187.7 kg ha^?1), P (13.7 kg ha^?1), K (242.5 kg ha^?1), S (10.1 kg ha^?1), and Zn (0.70 kg ha^?1). It was superior for wheat with grain yield (5215 kg ha^?1) and straw yield (7220 kg ha^?1); amounts of N (120.7 kg ha^?1), P (13.8 kg ha^?1), K (30 kg ha^?1), S (14.6 kg ha^?1), and Zn (0.18 kg ha^?1) taken up; and maintaining soil N (185.7 kg ha^?1), P (14.5 kg ha^?1), K (250.5 kg ha^?1), S (10.6 kg ha^?1), and Zn (0.73 kg ha^?1). Based on the study, 100% NPK + FYM at 10 tha^?1 + Zn at 25 kg ha^?1 + S at 25 kg ha^?1 could be recommended for attaining maximum returns of pearl millet–wheat under semi-arid Inceptisols.     

SOIL SALINITY AND SODICITY APPRAISAL BY ELECTROMAGNETIC INDUCTION IN SOILS IRRIGATED TO GROW COTTON

In the Far West Texas region in the USA, long‐term irrigation of fine‐textured valley soils with saline Rio Grande River water has led to soil salinity and sodicity problems. Soil salinity [measured by saturated paste electrical conductivity (EC_e)] and sodicity [measured by sodium adsorption ratio (SAR)] in the irrigated areas have resulted in poor growing conditions, reduced crop yields, and declining farm profitability. Understanding the spatial distribution of EC_e and SAR within the affected areas is necessary for developing management practices. Conventional methods of assessing EC_e and SAR distribution at a high spatial resolution are expensive and time consuming. This study evaluated the accuracy of electromagnetic induction (EMI), which measures apparent electrical conductivity (EC_a), to delineate EC_e and SAR distribution in two cotton fields located in the Hudspeth and El Paso Counties of Texas, USA. Calibration equations for converting EC_a into EC_e and SAR were derived using the multiple linear regression (MLR) model included in the EC_e Sampling Assessment and Prediction program package developed by the US Salinity Laboratory. Correlations between EC_a and soil variables (clay content, EC_e, SAR) were highly significant (p ≤ 0·05). This was further confirmed by significant (p ≤ 0·05) MLRs used for estimating EC_e and SAR. The EC_e and SAR determined by EC_a closely matched the measured EC_e and SAR values of the study site soils, which ranged from 0·47 to 9·87 dS m⁻¹ and 2·27 to 27·4 mmol^1/2 L^−1/2, respectively. High R² values between estimated and measured soil EC_e and SAR values validated the MLR model results. Results of this study indicated that the EMI method can be used for rapid and accurate delineation of salinity and sodicity distribution within the affected area. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of Boron and Lime on Productivity of Garden Pea under Acidic Soils in Northwestern Himalayas

An experiment comprising seven treatments was conducted to study the effect of boron and lime integrated with organic manures and nitrogen, phosphorus, and potassium (NPK) fertilizers on garden pea productivity. Seed yield along with growth parameters were significantly influenced by combined use of farmyard manure and NPK fertilizers either alone or in combination with boron and lime. Treatment combination of 20 t farmyard manure / ha + 100% NPK + borax (T₄) resulted in 37% increase in seed yield over recommended practice of 20 t farmyard manure / ha + 100% NPK (T₃). In addition, recommended practice supplemented with granubor (T₅) and lime (T₆) also significantly surpassed T₃ with respective increase of 14 and 10% in seed yield. Similarly, maximum nutrient was observed in T₄. Hence, application of boron along with farmyard manure and NPK fertilizers could be the best option to maximize pea productivity in acidic soils under humid subtemperate climate.     

ARBUSCULAR MYCORRHIZA,AZOSPIRILLUM AND CHEMICAL FERTILIZERS APPLICATION TO BABY CORN (ZEA MAYS L.): EFFECTS ON PRODUCTIVITY,NUTRIENTS USE EFFICIENCY,ECONOMIC FEASIBILITY AND SOIL FERTILITY

The study was investigated at Agricultural Experimental Farm, Giridih, India during winter seasons of 2007–2008 and 2008–2009. Plants grown with 100% recommended dose of fertilizer (RDF) [nitrogen (N): phosphorus pentoxide (P₂O₅): potassium oxide (K₂O) = 150:60:60 kg ha^?1] + AM + Azospirillum (T₁₅) produced maximum chlorophyll, baby cob, and green fodder yield. Root biomass was highest with application of 150% RDF + arbuscular mycorrhizae (AM) + Azospirillum (T₁₆). Co-inoculated plants produced higher chlorophyll, root biomass resulted higher cob and green fodder yield. Biofertilizers supplied along with chemical fertilizers saved 70, 29, and 33 kg N, P₂O₅ and K₂O per hectare, respectively. Nutrient (NPK) uptake was greatest in T_15. Residual soil fertility in terms of NPK was recorded maximum in T_16. Although, co-inoculated plots built up higher residual soil fertility as compare to sole inoculation. Nutrients use efficiency and benefit cost ratio were higher due to application of 50% RDF with co-inoculants. T₁₆ was most costly whereas T₁₄ (50% RDF + AM + Azospirillum) was most beneficial.     

Responses of physiological parameters,grain yield,and grain quality to foliar application of potassium nitrate in two contrasting winter wheat cultivars under salinity stress

An experiment was conducted to test whether foliar application of KNO₃ on wheat in the heading stage could reduce salinity‐induced injuries, produce high grain yield, and improve grain quality. Salt‐resistant DK961 and salt‐sensitive JN17 wheat cultivars under 0 or 100 mM–NaCl conditions were foliarly watered with distilled water or a 10 mM–KNO₃ solution. The four treatments included: T₁ (CK₁), 0 mM NaCl + distilled water; T₂, 0 mM NaCl + 10 mM KNO₃; T₃ (CK₂), 100 mM NaCl + distilled water; T₄, 100 mM NaCl + 10 mM KNO₃. The results indicate that there were no differences (p > 0.05) in plant growth, grain yield, and grain quality between T₂ and T₁ in both cultivars, but these response variables were significantly lower in T₃ than in T₁. K⁺ : Na⁺ ratio, chlorophyll content, photosynthetic capacity, grain yield, flour yield, water absorbance, ash content, dough‐development time and dough‐stability time were significantly higher in T₄ than in T₃, while protein concentration, wet‐gluten concentration, and antioxidant enzyme activities were lower. Although foliar application of KNO₃ on JN17 enhanced plant growth, grain yield, and grain quality, these parameters were still lower in T₄ than in T₁. Our findings suggest that cultivating the salt‐resistant wheat cultivar combined with foliar application of KNO₃ at heading stage may alleviate salinity injuries and produce higher grain yield and better grain quality under saline conditions.     

Contrasting plant–microbe interrelations on soil Di-(2-ethylhexyl) phthalate and pyrene degradation by three dicotyledonous plant species

Plants and associated microbial communities can actively participate in the biodegradation of organic pollution. Potexperiments were conducted to explore the plant–microbe interrelations on Di-(2-ethylhexyl) phthalate (DEHP) and pyrene degradation in a soil culture system. Three dicotyledonous plant species, Ceylon spinach (Gynuracusimbua (D. Don) S. Moore), sunflower (Helianthus annuus L.), and Shuidong mustard (Brassica juncea (L.) Coss.var. foliosa Bailey), were cultivated for 45 days in DEHP and pyrene co-contaminated soils using three initial content levels: 0 (T₀), 20 (T₂₀) and 50 mg?kg^?1 (T₅₀) with no plants (NP) as control. The results demonstrated that Shuidong mustard biomass and sunflower biomass had significantly positive correlations with the removal rate of DEHP (P?.05), respectively, while Ceylon spinach biomass has no significant correlation with the removal rate of DEHP. Shuidong mustard–actinomycetes and Ceylon spinach–actinomycetes accelerated the removal rate of pyrene, and sunflower–gram-positive bacteria could also enhance the removal rate of pyrene. Our results suggest that a better understanding of plant–microbe interrelations could be exploited to enhance the phytoremediation of organic co-contaminated soils.     

Nitrogen Sources and Rates Effect on Yield,Nutritional Status,and Yield Components of Sunflower

Due to the high levels of crude protein in the achene, sunflower (Helianthus annuus L.) is one of the main oilseeds grown worldwide, particularly for the oil and meal production for animal feed. Despite these advantages, there are few studies on nutrient use efficiency under tropical conditions, especially nitrogen (N). The experiment was conducted in greenhouse conditions to evaluate the effects of N sources and rates on sunflower achene yield (AY), yield and physiological components, and nutritional status of sunflower. The five N sources (calcium nitrate (Ca(NO₃)₂), potassium nitrate (KNO₃), ammonium nitrate (NO₃NH₄), ammonium sulfate ((NH₄)₂SO₄), and urea (CO(NH₂)₂)), and four N rates (0, 50, 100, and 200 mg kg^?1) were studied. AY was reduced with the ammonia sources application from the 100 mg N kg^?1. Plant height and capitulum dry weight (CDW), capitulum diameter, shoot dry weight (SDW), and chlorophyll content were significantly related with N sources and rates. Except for potassium (K), the N rates changed the N, P, Ca, Mg, and S concentration in the leaves and N concentration in achene. In the comparison of sources, on the average of N rates, urea application was more effective than the other N fertilizers in the AY.     

Potential of Carbon Dioxide Biosequestration of Saline–Sodic Soils during Amelioration under Rice–Wheat Land Use

Potential for carbon dioxide (CO₂) biosequestration was determined during the reclamation of highly saline–sodic soils (Aridisols) after rice (2003) and wheat (2003–2004) crops at two sites in District Faisalabad, Pakistan. Two treatments were assessed: T₁, tube-well brackish water only; and T₂, soil-applied gypsum at 25% soil gypsum requirement?+?tube-well brackish water. The irrigation water used at both sites had different levels of salinity (EC 3.9–4.5 dS m^?1), sodicity (SAR 21.7–28.8), and residual sodium carbonate (14.9 mmol_c L^?1). Composite soil samples were collected from soil depths of 0–15 and 15–30 cm at presowing and postharvest stages and analyzed for pH, EC_e, and sodium adsorption ratio (SAR). After rice harvest, there was no significant effect of gypsum application on EC_e, pH, and SAR at both sites, except pH at 0–15 cm depth decreased significantly with gypsum at site 1. After wheat harvest, EC_e, pH, and SAR decreased significantly with gypsum at site 1, whereas the effect of gypsum on these parameters was not significant at site 2. Compared to initial soil, EC_e and SAR in soil decreased considerably after rice or wheat cultivation, particularly at site 1, whereas pH increased slightly due to cultivation of these crops. For rice, the total CO₂ sequestration was significantly increased with gypsum application at both sites and ranged from 1499 to 2801 kg ha^?1. The total sequestration of CO₂ was also significantly increased with gypsum application in wheat at both sites and ranged from 2230 to 3646 kg ha^?1. The amounts of CO₂ sequestered by crops due to gypsum application were related to seed and straw yield responses of rice and wheat to gypsum, which were greater at site 1 than site 2. Also, the yield response to applied gypsum was greater for rice than wheat at site 1, whereas the opposite was true at site 2. Overall, the combined application of gypsum with brackish water reduced soil EC_e and SAR compared to brackish water alone, particularly at site 1. Our findings also suggest that the reclamation strategies should be site specific, depending on soil type and quality of brackish water used for irrigation of crops. In conclusion, the use of gypsum is recommended on brackish water–irrigated salt-prone soils to improve their quality, and for enhancing C biosequestration and crop production for efficient resource management.     

Effect of Moisture Content on the Viscoelastic Properties of Individual Wheat Kernels Evaluated by the Uniaxial Compression Test Under Small Strain

Wheat product quality is related to its physicochemical properties and to the viscoelastic properties of the kernel. The aim of this work was to evaluate the viscoelastic properties of individual wheat kernels using the uniaxial compression test under small strain (3%) to create experimental conditions that allow the use of the elasticity theory to explain the wheat kernel viscoelasticity and its relationships to physicochemical characteristics, such as weight tests, size, and ash and protein contents. The following viscoelastic properties of the kernels of hard and soft wheat cultivars at two different moisture contents (original and tempered at 15%) were evaluated: total work (W_t), elastic work (W_e), plastic work (W_p), and modulus of elasticity (E). There was a significant decrease in W_t as the moisture content increased. In the soft wheat Saturno, W_t decreased 80% (from 0.217 to 0.044 N·mm) as the moisture content increased. Individual wheat kernels at their original moisture content showed higher W_e than under the tempered condition. W_p increased as the moisture content increased. E decreased as the moisture content increased. The soft wheat Saturno showed the highest decline (54.9%) in E (from 14.18 to 6.39 MPa) as the moisture content increased. There were significant negative relationships between the viscoelastic properties and the 1,000‐kernel weight and kernel thickness. The uniaxial compression test under small strain can be applied to evaluate the viscoelastic properties of individual wheat kernels from different classes and cultivars.     

Effect of salt stress on photosynthesis and related physiological characteristics of Lycium ruthenicum Murr

Halophytes could withstand the hyper-salinity soil and survive widely in areas where soil salt content is high because they can endure salt stress to a certain extent. Lycium ruthenicum Murr (LRM), with significant nutritional and medicinal values, is one of the most important native halophytes in the arid oasis-desert transition zone of northwestern China. In recent years, artificially planting LRM has been being popular since it can improve saline-alkalized soil and increase the income of local farmers as well. More efforts about the artificial planting of LRM are put in enhancing the productivity and quality, but survivorship of LRM seedling by appropriate saline irrigation is still unclear in arid areas. A field experiment was conducted to explore the responses of LRM to four levels of saline water irrigation (Ec of irrigation water: 2.00?μs?cm^?1 (T₁), 4.51?μs?cm^?1 (T₂), 6.89?μs?cm^?1 (T₃), and 9.00?μs?cm^?1 (T₄)) during the growing seasons in 2014 and 2015. The average soil electrical conductivity (Ec_a) in 0–60 cm depth increased while the biomass of LRM decreased with increasing Ec of irrigation water, and the differences of Ec_a among treatments decreased with increasing salinity level. In contrast to previous research findings, salt stress had more significant effect on photosynthesis and chlorophyll fluorescence of LRM, in which great changes were caused by a threshold following the increased salinity. Most of the light energy absorbed by LRM was used for photosynthesis and heat dissipation when soil salinity was low, what was used for chlorophyll fluorescence when soil salinity was high. The results of the experiment indicate that T₂ was the most suitable irrigation method for artificially planting LRM in the field, and it’s the key to save freshwater resources in arid areas and improve the production of saline-alkali land.     

Soil porous system changes quantified by analyzing soil water retention curve modifications

Soil water retention curves (SWRCs) relate soil water pressure head (h) to soil water content (θ) and can also be used to find information regarding soil pore distribution. To analyze SWRCs in relation to pore size distribution (PSD), changes due to wetting and drying (W–D) cycles were studied in three different tropical soils (Geric Ferralsol, GF; Eutric Nitosol, EN; Rhodic Ferralsol, RF), using three different treatments: T₀, the control with samples not submitted to W–D cycles; T₃, samples submitted to three consecutive W–D cycles; T₉, samples submitted to nine consecutive W–D cycles. Log-normal PSD equations for each treatment were obtained using the S-theory. For the GF soil, the pressure heads separating structural and matrix domains (h_s) were 17.7, 12.2 and 14.7 kPa for T₀, T₃, and T₉, respectively. These values are equivalent to pore radia of 8.4 μm (T₀), 12 μm (T₃), and 10 μm (T₉). For the RF soil, h_s values were 8.5 kPa (T₀), 20.5 kPa (T₃), and 15.1 kPa (T₉), equivalent to radia of 18 μm (T₀), 7.3 μm (T₃), and 9.9 μm (T₉); and finally, for the EN soil, h_s were 18.1 kPa (T₀), 9.1 kPa (T₃), and 13.5 kPa (T₉), equivalent to radia of 8.2 μm (T₀), 16 μm (T₃), and 11 μm (T₉). It was found that the soil structure presented important changes in PSD due to W–D cycles for all the investigated soils. It was also observed that the W–D cycles increased the S_inf (slope of SWRC) value for the GF soil for all treatments; S_inf did not substantially change in all treatments for the EN soil; S_inf decreased between T₀ and T₃, and T₀ and T₉ for the RF soil. According to the S-theory, it is possible to infer that W–D cycles improved the soil structure of GF, made the RF soil structure worse and did not substantially change the EN soil structure.     

K-priming positively modulates growth and nutrient status of salt-stressed cotton (Gossypium hirsutum) seedlings

Being macronutrient, K⁺ is involved in a number of metabolic processes including stimulation of over 60 enzymes. The present study was conducted to investigate whether K-priming could alleviate the effects of salinity on the growth and nutrient status of cotton seedlings. The seeds of two cotton cultivars, namely FH-113 and FH-87, were primed with solutions of three potassium sources (KNO₃, K₂SO₄ and K₂HPO₄) using three concentrations (0%, 1.25% and 1.5%) of each potassium source. After 1 week of germination, the seedlings were subjected to salinity (0 and 200 mM NaCl) stress. The results showed that salinity significantly affected growth and nutrients status of cotton seedlings. The K-priming alleviated the stress condition and significantly improved dry matter as well as nutrient uptake in cotton seedlings. Of the priming treatments pre-sowing treatment with KNO₃ (1.5%) was most effective in increasing shoot and root lengths and biomass of cotton seedlings. The seedlings raised from seed treated with KNO₃ (1.5%) showed varied accumulation of cations (Ca²⁺, Na⁺ and K⁺) and faced less oxidative stress irrespective of cotton cultivars under salt stress. The results suggested that pre-sowing seed treatment with KNO₃ (1.5%) might be recommended for synchronized germination and sustainable production of cotton crop under saline environments.     

Indicators of soil quality and crop productivity assessment at a long-term experiment site in the lower Indo-Gangetic plains

Deterioration of soil quality under resource-intensive modern agriculture in the face of global climate change poses a huge risk to food security. Because of the complex nature, estimators of soil quality often rely upon a limited set of soil attributes, along with statistical data reduction techniques, for developing quality indices, whilst overlooking biological aspects and regional climatic variability. This study screened the most suitable soil quality indexing approaches for a rice-oilseed-based cropping system in the lower Indo-Gangetic plains (IGP). For this, surface soil samples (0–15 cm) were collected from an ongoing long-term fertilizer experiment with a rice-mustard-sesame cropping system in the IGP. The following treatments were assessed for their effect on soil quality: T₁-control, T₂-NPK (recommended NPK doses), T₃-NPKG (NPK + in situ green manuring), T₄-NPKGB (NPK + in situ green manuring + biofertilizer) and T₅-NPKF (NPK + farm yard manure FYM). We found that total organic carbon (TOC), β-glucosidase, CaCl₂ extractable S, alkaline KMnO₄ oxidizable N, activity of urease, amidase enzyme and mean weight diameter (MWD) were sensitive key indicators of soil quality. The NPKF treatment maintained the highest soil quality status (0.80–0.91), both under productivity and environmental protection goals, owing to the availability of decomposable carbon. Regression analysis showed a better agreement of equivalent rice yield with expert opinion (EO; R² = 0.89) than principal component analysis (PCA; R² = 0.76). Finally, we found that the expert opinion approach with the nonlinear scoring function was the best tool for soil quality assessment of the region.     

Assessment of genetic diversity in cultivars and wild accessions of Luohanguo (<Emphasis Type="Italic">Siraitia grosvenorii</Emphasis> [Swingle] A. M. Lu et Z. Y. Zhang), a species with edible and medicinal sweet fruits endemic to southern China,using RAPD and AFLP markers

Genetic variation of wild populations and cultivars of Luohanguo (Siraitia grosvenorii), a plant species endemic to southern China, was assessed using random amplified polymorphic DNA (RAPD) and amplified fragment length polymorphism (AFLP) markers. Based on the results for 130 individuals from seven populations, a high level of genetic diversity of Luohanguo was observed at the species level. The percentage of polymorphic loci (P) was 89.4%, Nei’s gene diversity (H _e) was 0.239, and Shannon’s information index (H _o) was 0.373 based on the combined AFLP and RAPD data. There was a high degree of genetic differentiation, with 45.1% of the genetic variation attributed to differences between the populations. The genetic diversity of the Luohanguo cultivars is much lower than that of wild populations (P = 41.8%, H _e = 0.141, H _o = 0.211), and a distinct genetic differentiation is observed between the cultivars and wild accessions. The pool of genetic variation in the wild populations provides an excellent gene resource for Luohanguo breeding.     

硅对Cd胁迫下黄瓜苗期光合及抗氧化酶系统的影响

为了解石灰性土壤硅对Cd胁迫下黄瓜苗期叶片的光合特性和抗氧化酶系统及对实际土壤Cd毒害植物的防治,研究了硅介入下Cd污染土壤中黄瓜苗期的叶片净光合速率(P_n)、气孔导度(G_s)、蒸腾速率(T_r)、胞间CO_2(C_i)等光合作用指标,叶绿素含量,丙二醛(MDA)、超氧化物歧化酶(SOD)、过氧化物酶(POD)、过氧化氢酶(CAT)等抗氧化酶系统等相关参数。结果表明:与空白相比较,单施Cd处理下,P_n、G_s、T_r和叶绿素含量下降,Ci提高。硅介入后,能明显提高P_n、G_s、T_r和叶绿素总量,降低C_i含量。当C_d含量为5mg/kg时,硅施加量100~200mg/kg情况下,与空白相比,P_n、G_s、T_r和叶绿素上升,C_i下降,但100mg/kg与200mg/kg的硅处理差异不明显,300mg/kg的硅添加量效果最好。对于抗氧化酶系统,与空白相比较,土壤Cd含量为3~5mg/kg时,3类抗氧化酶的活性均受到显著抑制,200~300mg/kg硅的引入可明显提高SOD、POD、CAT活性,降低MDA值。可见,硅的引入可明显改善Cd胁迫下黄瓜叶片的光合特性和抗氧化酶系统。施用少量硅肥在石灰性土壤中对缓解植物Cd毒害具有一定的应用前景。     

Effects of Biomethanated Spentwash on Soil Properties,Nutrient Availability,Uptake, and Yield of Soybean–Wheat Sequence on Inceptisol

The research aimed to study the effect of presown application of primary biomethanated spentwash (PBSW) on soil properties, nutrient availability, uptake and yield of soybean–wheat sequence on Inceptisol. The field experiment with randomised block design was initiated during 2007–8 and present observation was recorded during 2009–10 and 2010–11.The five treatments were, recommended dose (RD) of NPK (T₁), 100% RD of N through PBSW without (T₂) and with P chemical fertilizer (T₃), 50 and 25% RD of N through PBSW + remaining N and P through chemical fertilizers (T₄,T₅), respectively. The results revealed that the soil physical properties and microbial populations were improved in T₂ and T₃. The lowest soil pH and pHs were observed in T₂. The soil electrical conductivity, organic carbon, exchangeable sodium percentage and sodium adsorption ratio of soil extracts and available K were increased with the increase in PBSW as compared to RD-NPK. The soil available N and P were decreased as PBSW increased at all the soil depths. The greatest yields and total N,P,K uptake of soybean and wheat were observed in T₅.     

Effects of microplastic polystyrene, simulated acid rain and arbuscular mycorrhizal fungi on Trifolium repens growth and soil microbial community composition

Microplastic pollution is a global and ubiquitous environmental problem in the oceans as well as in the terrestrial environment. We examined the fate of microplastic polystyrene (MPS) beads in experimental soil in the presence and absence of symbiotic arbuscular mycorrhizal fungi (AMF) and simulated acid rain (SAR) to determine whether the combinations of these three factors altered the growth of white clover Trifolium repens. We found that MPS, SAR, or AMF added singly to soil did not alter T. repens growth or yields. In contrast, MPS and AMF together significantly reduced shoot biomass, while SAR and MPS together significantly reduced soil available phosphorus independent of AMF presence. Microplastic polystyrene, AMF, and SAR together significantly reduced soil NO^-₃-N. Arbuscular mycorrhizal fungi added singly also enriched the beneficial soil bacteria (genus Solirubrobacter), while MPS combined with AMF significantly enriched the potential plant pathogenic fungus Spiromastix. Arbuscular mycorrhizal fungi inoculation with MPS increased the abundance of soil hydrocarbon degraders independent of the presence of SAR. In addition, the abundance of soil nitrate reducers was increased by MPS, especially in the presence of AMF and SAR. Moreover, SAR alone increased the abundance of soil pathogens within the fungal community including antibiotic producers. These findings indicate that the coexistence of MPS, SAR, and AMF may exacerbate the adverse effects of MPS on soil and plant health.     

Effects of foliar spray of nano-particles of FeSO4 on the growth and ion content of sunflower under saline condition

This study investigated the effects of foliar spray of normal and nano-particles of iron sulfate (FeSO₄) on the response of sunflower cultivars to salinity. Treatments included five cultivars (Alstar, Olsion, Yourflor, Hysun36 and Hysun33), two salinity levels (0 and 100 mM sodium chloride (NaCl)), and three levels of fertilizer application. Fertilizer treatments were the foliar application of normal and nano-particles of FeSO₄. Foliar application of FeSO₄ in either form increased leaf area, shoot dry weight, net carbon dioxide (CO₂) assimilation rate (A), sub-stomatal CO₂ concentration (Ci), chlorophyll content, Fv/Fm and iron (Fe) content and decreased sodium (Na) content in leaves. The extent of increase in chlorophyll a content by foliar spray of FeSO₄ nano-particles was significantly greater than normal form. The results showed that the FeSO₄ nano-particles increased biomass production of sunflower plants greater in comparison with normal form, although no significant difference was found between two forms.