Using Cs and Pbex for quantifying soil organic carbon redistribution affected by intensive tillage on steep slopes

Studying on spatial and temporal variation in soil organic carbon (SOC) is of great importance because of global environmental concerns. Tillage-induced soil erosion is one of the major processes affecting the redistribution of SOC in fields. However, few direct measurements have been made to investigate the dynamic process of SOC under intensive tillage in the field. Our objective was to test the potential of ¹³⁷Cs and ²¹⁰Pb_ex for directly assessing SOC redistribution on sloping land as affected by tillage. Fifty plowing operations were conducted over a 5-day period using a donkey-drawn moldboard plow on a steep backslope of the Chinese Loess Plateau. Profile variations of SOC, ¹³⁷Cs and ²¹⁰Pb_ex concentrations were measured in the upper, middle and lower positions of the control plot and the plot plowed 50 times. ¹³⁷Cs concentration did not show variations in the upper 0–30 cm of soil whereas ²¹⁰Pb_ex showed a linear decrease (P < 0.05) with soil depth in the upper and middle positions, and an exponential decrease (P < 0.01) at the lower position of the control plot. The amounts of SOC, ¹³⁷Cs and ²¹⁰Pb_ex of sampling soil profiles increased in the following order: lower > middle > upper positions on the control plot. Intensive tillage resulted in a decrease of SOC amounts by 35% in the upper and by 44% in the middle positions for the soil layers of 0–45 cm, and an increase by 21% in the complete soil profile (0–100 cm) at the lower position as compared with control plot. Coefficients of variation (CVs) of SOC in soil profile decreased by 18.2% in the upper, 12.8% in the middle, and 30.9% in the lower slope positions whereas CVs of ¹³⁷Cs and ²¹⁰Pb_ex decreased more than 31% for all slope positions after 50 tillage events. ¹³⁷Cs and ²¹⁰Pb_ex in soil profile were significantly linearly correlated with SOC with R² of 0.81 and 0.86 (P < 0.01) on the control plot, and with R² of 0.90 and 0.86 (P < 0.01) on the treatment plot. Our results evidenced that ³⁷Cs and ²¹⁰Pb_ex, and SOC moved on the sloping land by the same physical mechanism during tillage operations, indicating that fallout ¹³⁷Cs and ²¹⁰Pb_ex could be used directly for quantifying dynamic SOC redistribution as affected by tillage erosion.     

Deep tillage and traffic effects on subsoil compaction and sunflower (Helianthus annus L.) yields

The main function of deep tillage is to alleviate subsoil compaction, but how long do the benefits of this technique remain? Traffic on loose soil causes a significant increase in soil compaction. Subsoiling and chisel plowing were carried out at 450 and 280 mm depth, respectively on a compacted soil in the west Rolling Pampas region of Argentina. The draft required, physical soil properties, root growth, sunflower (Helianthus annus L. Merr.) yield and traffic compaction over the subsequent two growing seasons were measured. Cone penetrometer resistance was reduced and sunflower yields increased following deep tillage operations. Subsoil compaction caused changes to the root system of sunflower that affected shoot growth and crop yields. Although subsoiling and chiseling had an immediate loosening effect, it was evident that after just 2 years, when traffic intensity was >95 mg km ha⁻¹, re-compaction and settling had occurred in the 300–600 mm depth range.     

Short-term temporal changes of soil carbon losses after tillage described by a first-order decay model

Tillage stimulates soil carbon (C) losses by increasing aeration, changing temperature and moisture conditions, and thus favoring microbial decomposition. In addition, soil aggregate disruption by tillage exposes once protected organic matter to decomposition. We propose a model to explain carbon dioxide (CO₂) emission after tillage as a function of the no-till emission plus a correction due to the tillage disturbance. The model assumes that C in the readily decomposable organic matter follows a first-order reaction kinetics equation as: dC_sail(t)/dt = −kC_soil(t) and that soil C-CO₂ emission is proportional to the C decay rate in soil, where C_soil(t) is the available labile soil C (g m⁻²) at any time (t). Emissions are modeled in terms soil C available to decomposition in the tilled and non-tilled plots, and a relationship is derived between no-till (F_NT) and tilled (F_T) fluxes, which is: F_T=a₁F_NT e^−a₂t, where t is time after tillage. Predicted and observed fluxes showed good agreement based on determination coefficient (R²), index of agreement and model efficiency, with R² as high as 0.97. The two parameters included in the model are related to the difference between the decay constant (k factor) of tilled and no-till plots (a₂) and also to the amount of labile carbon added to the readily decomposable soil organic matter due to tillage (a₁). These two parameters were estimated in the model ranging from 1.27 and 2.60 (a₁) and −1.52 × 10⁻² and 2.2 × 10⁻² day⁻¹ (a₂). The advantage is that temporal variability of tillage-induced emissions can be described by only one analytical function that includes the no-till emission plus an exponential term modulated by tillage and environmentally dependent parameters.     

Assessment of tillage erosion rates on steepland Oxisols in the humid tropics using granite rocks

Soil translocation by tillage may be an important factor in land degradation in the humid tropics. The objective of this study was to evaluate tillage-induced soil translocation on an Oxisol with 25% and 36% slopes in Claveria, Philippines for three tillage systems: contour moldboard plowing (CMP), moldboard plowing up and downslope (UMP), and contour ridge tillage (CRT). Small rocks 3–4 cm in “diameter” were used as soil movement detection units (SMDU). The SMDUs were placed at 10 cm intervals in a narrow 5-cm-deep trench near the upper boundary of each plot, the position of each rock recorded, and the trench backfilled. Five tillage operations used to produce one corn crop were performed during a one month period: two moldboard plowing operations for land preparation (except for CRT), one moldboard plowing for corn planting, and two inter-culture (inter-row cultivation) operations. After these operations, over 95% of the SMDU were recovered manually and their exact locations recorded. Mean annual soil flux for the 25% slope was 365 and 306 kg m⁻¹ y⁻¹ for UMP and CMP, respectively. For the 36% slope, comparable values were 481 and 478 kg m⁻¹ y⁻¹. Estimated tillage erosion rates for the 25% slope were 456 and 382 Mg ha⁻¹ y⁻¹ for UMP and CMP, respectively, and increased to 601 and 598 Mg ha⁻¹ y⁻¹, respectively, for the 36% slope. The mean displacement distance, mean annual soil flux, and mean annual tillage-induced soil loss for both slopes were reduced by approximately 70% using CRT compared to CMP and UMP.     

Soil C, N and crop yields in Alabama's long-term ‘Old Rotation' cotton experiment

The Old Rotation cotton experiment at Auburn, Alabama, is the oldest, continuous cotton experiment in the world (cf. 1896). Long-term cropping systems provide a unique opportunity to observe the effects of 100 years of cropping on soil organic carbon (SOC). The objective of this paper was to summarize limited data on SOC and N cycling in this historic experiment. Soil organic C has been measured on the 13 plots (6 cropping systems) in 1988, 1992 and 1994. Long-term planting of winter legumes with no other source of N applied resulted in higher SOC (9.5 g C kg⁻¹) in the plow layer (0–20 cm depth) compared to continuous cotton with no winter cover crops (4.2 g C kg⁻¹). A 3-year rotation of cotton–winter legumes–corn–small grain–soybean resulted in 12.1 g C kg⁻¹. There was a significant (P<0.05), quadratic cotton yield response (R²=0.54) to increasing SOC. Winter legume cover crops supplied between 90 and 170 kg N ha⁻¹. Where no N has been applied in fertilizer or from a legume crop, annual N removal in the cotton crop is around 13 kg ha⁻¹, about the same as that fixed in precipitation.     

Remote sensing of crop residue cover and soil tillage intensity

Management of plant litter or crop residues in agricultural fields is an important consideration for reducing soil erosion and increasing soil organic C. Current methods of quantifying crop residue cover are inadequate for characterizing the spatial variability of residue cover within fields or across large regions. Our objectives were to evaluate several spectral indices for measuring crop residue cover using satellite multispectral and hyperspectral data and to categorize soil tillage intensity in agricultural fields. Landsat Thematic Mapper (TM) and EO-1 Hyperion imaging spectrometer data were acquired over agricultural fields in central Iowa in May and June 2004. Crop residue cover was measured in corn (Zea mays L.) and soybean (Glycine max Merr.) fields using line-point transects. Spectral residue indices using Landsat TM bands were weakly related to crop residue cover. With the Hyperion data, crop residue cover was linearly related to the cellulose absorption index (CAI), which measures the relative intensity of cellulose and lignin absorption features near 2100 nm. Coefficients of determination (r²) for crop residue cover as a function of CAI were 0.85 for the May and 0.77 for the June Hyperion data. Three tillage intensity classes, corresponding to intensive (<15% residue cover), reduced (15–30% cover) and conservation (>30% cover) tillage, were correctly identified in 66–68% of fields. Classification accuracy increased to 80–82% for two classes, corresponding to conventional (intensive + reduced) and conservation tillage. By combining information on previous season's (2003) crop classification with crop residue cover after planting in 2004, an inventory of soil tillage intensity by previous crop type was generated for the whole Hyperion scene. Regional surveys of soil management practices that affect soil conservation and soil C dynamics are possible using advanced multispectral or hyperspectral imaging systems.     

Soil physical properties and soybean (Glycine max, Merrill) root abundance in conventionally- and zero-tilled soils in the humid Pampas of Argentina

In the humid Pampas of Argentina soybean is cultivated in different soil types, which were changed from conventional- to zero tillage systems in the last decade. Little is known about the response of soybean roots to these different soil physical environments. Pasture, and conventionally- and zero-tilled field lots cropped to soybean (R1 and R2 ontogenic stages) were sampled in February–March 2001 in a sandy clay loam and two silty clay loam Mollisols, and in a clayey Vertisol. In the 0–0.05 m layer of conventionally- and zero-tilled lots soil organic carbon represented 53–72% of that in pasture lots, and showed an incipient recovery after 4–11 years of continuous zero tillage. Soil aggregate stability was 10.1–46.8% lower in conventionally-tilled than in pasture lots, and recovered completely in zero-tilled lots. Soil relative compaction ranged 60.8–83.6%, which was below the threshold limit for crop yields (>90%). In change, soil porosity >50 μm ranged 0.91–5.09% soil volume, well below the minimum critical limit for root aeration and elongation (>10%, v/v). The threshold of soil resistance (about 2–3 MPa) was only over passed in an induced plough pan in the conventionally-tilled Bragado soil (5.9 MPa), and in the conventionally- and zero-tilled Ramallo soils (3.7–4.2 MPa, respectively). However, neither the low macroporosity nor the high soil resistances impeded soybean roots growth in any site. According to a fitted polynomial function, root abundance was negatively related to clay content in the subsoil (R² = 0.84, P < 0.001). Soybean roots were only abundant in the subsoil of the sandy clay loam Mollisol, which had <350 g kg⁻¹ clay. Results show that subsoil properties, and not tillage systems, were the primary effect of root growth of soybean.     

Effect of tillage treatments on soil thermal conductivity for some Jordanian clay loam and loam soils

Soil thermal conductivity determines how a soil warms or cools with exchange of energy by conduction, convection, and radiation. The ability to monitor soil thermal conductivity is an important tool in managing the soil temperature regime to affect seed germination and crop growth. In this study, the temperature-by-time data was obtained using a single probe device to determine the soil thermal conductivity. The device was used in the field in some Jordanian clay loam and loam soils to estimate their thermal conductivities under three different tillage treatments to a depth of 20 cm. Tillage treatments were: no-tillage, rotary tillage, and chisel tillage. For the same soil type, the results showed that rotary tillage decreased soil thermal conductivity more than chisel tillage, compared to no-tillage plots. For the clay loam, thermal conductivity ranged from 0.33 to 0.72 W m⁻¹ K⁻¹ in chisel plowed treatments, from 0.30 to 0.48 W m⁻¹ K⁻¹ in rotary plowed treatments, and from 0.45 to 0.78 W m⁻¹ K⁻¹ in no-till treatments. For the loam, thermal conductivity ranged from 0.40 to 0.75 W m⁻¹ K⁻¹ in chisel plowed treatments, from 0.34 to 0.57 W m⁻¹ K⁻¹ in rotary plowed treatments, and from 0.50 to 0.79 W m⁻¹ K⁻¹ in no-till treatments. The clay loam generally had lower thermal conductivity than loam in all similar tillage treatments. The thermal conductivity measured in this study for each tillage system, in each soil type, was compared with independent estimates based on standard procedures where soil properties are used to model thermal conductivity. The results of this study showed that thermal conductivity varied with soil texture and tillage treatment used and that differences between the modeled and measured thermal conductivities were very small.     

An approach for draft prediction of combination tillage implements in sandy clay loam soil

A methodology to predict the draft requirements of combination tillage implements in any soil and operating conditions was developed. This methodology required the draft requirements of individual tillage implements in undisturbed soil condition and draft utilization ratio of the rear passive set of combination tillage implement, which is defined as the ratio of the drafts of the rear passive set operating in combination and individually. Laboratory experiments were conducted to measure the draft requirements of a reference tillage tool (single disk), three scale-model individual (moldboard plow, cultivator and disk gang) and two combination (moldboard plow with disk gang and cultivator with disk gang) tillage implements at different depths (5, 7.5 and 10 cm), speeds (1.2, 2.2, 3.2 and 4.2 km/h), wet bulk densities (in the range of 1.27–1.85 g/cm³) and cone index penetration resistance values (in the range of 445–1450 kPa) in soil bin filled with sandy clay loam soil. The average draft utilization ratio of the reference tillage tool obtained were analyzed by both orthogonal and multiple regression techniques to develop the regression equation considering soil properties, operating and tool parameters. The developed draft equation based on the above mentioned methodology was verified with the data obtained for the draft of scale-model and prototype combination tillage implements in the laboratory and field conditions, respectively. It was found that the developed equation predicted the draft of both combination tillage implements within an average absolute variation of 18.0 and 13.5%, respectively.     

Ridge tillage and contour natural grass barrier strips reduce tillage erosion

Large amounts of soil are eroded annually from tilled, hilly upland soils in the humid tropics. Awareness has been increasing that much of this erosion may be due to tillage operations rather than water-induced soil movement. This field study estimated soil translocation and tillage erosion for four tillage systems on Oxisols with slope gradients of 16–22% at Claveria, Misamis Oriental, Philippines. Soil movement was estimated using ‘soil movement tracers' (SMT) which consisted of painted 12-mm hexagonal steel nuts. The SMT were buried in three replicate plots of the following tillage treatments: (1) contour moldboard plowing in the open field (MP-open); (2) contour ridge tillage in the open field (RT-open); (3) contour moldboard plowing plus contour natural grass barrier strips (MP-strip); and (4) contour natural grass barrier strips plus ridge tillage (RT-strip). Two hundred SMT were placed at the 5-cm depth at 5-cm spacings on 10 rows and 20 columns in two microplots within each plot. The microplots were oriented with the boundaries running downslope and along the contour of each 8-m-wide × 38-m-long (downslope) tillage plot. After tilling the land for four successive corn (Zea mays L.) crops (20 tillage operations), the SMT were manually excavated and their positions recorded. Recovery of SMT ranged from 82% to 85%. Displacement of SMT was directly related to slope length, percent slope, and tillage method. Mean displacement distance of SMT during the four corn growing seasons was 3.3 m for MP-open, 1.8 m for RT-open, 1.5 m for the RT-strip, and 2.2 m for MP-strip. Based on tillage operations associated with two corn crops per year, mean annual soil flux was estimated to be 241, 131, 158 and 112 kg m⁻¹ for MP-open, RT-open MP-strip, and RT-strip, respectively. Compared to the mean annual soil loss for MP-open of 63 Mg ha⁻¹, soil loss was reduced by 30%, 45%, and 53% for the MP-strip, RT-open, and RT-strip systems, respectively. Both ridge tillage and natural grass barrier strips reduced soil displacement, soil translocation flux, and tillage erosion rates.     

Soil erosion estimation in conservation tillage systems with poultry litter application using RUSLE 2.0 model

Soil erosion is a major threat to global economic and environmental sustainability. This study evaluated long-term effects of conservation tillage with poultry litter application on soil erosion estimates in cotton (Gossypium hirsutum L.) plots using RUSLE 2.0 computer model. Treatments consisting of no-till, mulch-till, and conventional tillage systems, winter rye (Secale cereale L.) cover cropping and poultry litter, and ammonium nitrate sources of nitrogen were established at the Alabama Agricultural Experiment Station, Belle Mina, AL (34°41′N, 86°52′W), beginning fall 1996. Soil erosion estimates in cotton plots under conventional tillage system with winter rye cover cropping declined by 36% from 8.0 Mg ha⁻¹ year⁻¹ in 1997 to 5.1 Mg ha⁻¹ year⁻¹ in 2004. This result was largely attributed to cumulative effect of surface residue cover which increased by 17%, from 20% in 1997 to 37% in 2004. In conventional tillage without winter rye cover cropping, soil erosion estimates were 11.0 Mg ha⁻¹ year⁻¹ in 1997 and increased to 12.0 Mg ha⁻¹ year⁻¹ in 2004. In no-till system, soil erosion estimates generally remained stable over the study period, averaging 0.5 and 1.3 Mg ha⁻¹ year⁻¹with and without winter rye cover cropping, respectively. This study shows that cover cropping is critical to reduce soil erosion and to increase the sustainability of cotton production in the southeast U.S. Application of N in the form of ammonium nitrate or poultry litter significantly increased cotton canopy cover and surface root biomass, which are desirable attributes for soil erosion reduction in cotton plots.     

Soil quality indicators under continuous cropping systems in the Argentinean Pampas

Over the last two decades, soil cultivation practices in the southern Argentinean Pampas have been changing from a 7 year cash-crop production system alternated with 2–3 years under pasture, to a continuous cropping system. A better understanding of the impact of the period of time a field has been under continuous cropping on a broad spectrum of soil properties related to soil quality is needed to target for sustainable cropping systems. The objectives of this study were to: (i) assess the relationship between physical and chemical soil parameters related to soil quality and (ii) identify soil quality indicators sensitive to soil changes under continuous cropping systems in the Argentinean Pampas.

Correlation analysis of the 29 soil attributes representing soil physical and chemical properties (independent variables) and years of continuous cropping (dependent variable) resulted in a significant correlation (p < 0.05) in 78 of the 420 soil attribute pairs. We detected a clear relationship between hydraulic conductivity at tension h (K_h) and structural porosity (ρ_e); ρ_e being a simple tool for monitoring soil hydraulic conditions.

Soil tillage practice (till or no-till) affected most of the soil parameters measured in our study. It was not possible to find only one indicator related to the years under continuous cropping regardless of the cultivation practice. We observed a significant relationship between years under continuous cropping and K_h under no-till (NT) and wheat fallow (p < 0.001, R² = 0.70). Under these conditions, K₋₄₀ diminished as the number of years under continuous cropping increased.

The change in mean weight diameter (CMWD) was the only physical parameter related to the number of years under continuous cropping, explaining 36% of the variability in the number of years under continuous cropping (p < 0.001) The combination of three soil quality indicators (CMWD, partial R² = 0.38; slope of the soil water retention curve at its inflexion point (S), partial R² = 0.14 and cation exchange capacity (CEC), partial R² = 0.13) was able to explain, in part, the years under continuous cropping (R² = 0.65; p value > 0.001), a measure related to soil quality.     

Depth distribution and bioavailability of pollutants in long-term differently tilled soils

Pollutants can be introduced to soil through the application of organic and inorganic fertilizers and pesticides and through atmospheric depositions. The objective of this research was to evaluate the influence of long-term (9–17 years) tillage systems on the behavior of pollutants in soils. Bioavailability and enrichment of heavy metals, arsenic, and organics, i.e. polychlorinated biphenyls (PCB’s) and a chlorinated phenol (2,4-DCP) were measured in a Eutric Cambisol and a Luvisol under conventional tillage (CT), reduced tillage (RT), and no-tillage (NT). Soil samples were collected from 0 to 3, 3 to 10, and 10 to 25 cm depths.

The upper layer of NT soils was enriched in pollutants, but concentrations decreased with increasing soil depth. Atmospheric deposition of pollutants and input via organic fertilizers was noticeable in soils under long-term NT. Total amount of zinc (59 mg kg⁻¹) was significantly enriched in the 0–3 cm depth of the Luvisol under NT and this was attributed to higher sorption capacity for heavy metal input via liquid manure. In the Eutric Cambisol, NT resulted in significant increase of cadmium extracted by aqua regia in the arable layer of 0–25 cm. As a result of higher soil organic C, long-term accumulation of PCB’s in NT soils was more pronounced than in plowed soils. In plowed soils the mixing effect resulted in homogeneous distribution of pollutants within a soil depth of 0–25 cm.

The enrichment of organic C in RT and NT soils emphasizes the role of soils as a sink for pollutants, buffering the contaminants against leaching and transfer into crops.     

Tillage impacts on aggregate stability and crop productivity in a clay-loam soil in central Iran

To take advantage of conservation tillage systems (including direct drilling and non-inversion) in central Iran, it is important to study the effects of different cultivation practices on soil structural stability as a physical indicator. A four-year study was conducted to investigate the effects of seven tillage systems on aggregate properties of a clay-loam soil (Calcic Cambisol) with continuous wheat (Triticum aestivum L.) production. Crop productivity was also evaluated. Tillage treatments were moldboard plowing+disking (MD) as conventional tillage; chisel plowing +disking (CD); chisel plowing+rotary tilling (CR); chisel plowing (twice)+disking (2CD); plowing with Khishchi (a regional rigid cultivator)+disking (KD) as non-inversion methods; and till-planting with cultivator combined drill (TP); and no-till (NT) as direct drilling methods. A randomized complete block design consisting of four replications was used. Samples were taken from three different soil depths. A wet sieving method was used to determine aggregate size distribution (ASD), and mean weight diameter (MWD) as indices of soil aggregate stability. Soil organic carbon was also determined. For the first three years of the experiment, ASD and MWD at 0–15 cm were similar in different tillage treatments, except for direct drilling which had a significantly higher amount of aggregate greater than 2 mm and 2–1 mm diameter compared to the conventional method. At the second and third sampling depths all treatments had similar influence on ASD and MWD. Tillage treatments showed a significant effect on ASD and MWD in the fourth year of the experiment in all three depths. Almost 70% of the aggregates in the MD system were less than 0.25 mm, while only 55% of the aggregates in the direct drilling methods were less than 0.25 mm diameter. The four-year yield average for conventional and non-inversion tillage systems was 7264 and 6815 kg ha⁻¹, respectively. Although, direct drilling improved soil structural stability, its lower yield (5608 and 4731 kg ha⁻¹ for TP and NT, respectively) potential would indicate that reduced tillage systems (i.e. CD) appear to be the accepted alternative management compared to conventional practice (MD).     

Glomalin in aggregate size classes from three different farming systems

Glomalin was measured in soil from farming systems managed for 8 years by chisel tillage (CT), more intensive tillage for organic (ORG) production, and no tillage (NT) on Acrisols (FAO Soil Units) in the Mid-Atlantic region of the U.S. Whole soil and aggregate size classes of >2.00, 0.50–2.00 and 0.21–0.50 mm (macroaggregates), 0.05–0.21 mm (microaggregates), and <0.05 mm (fine material) were examined. Glomalin-related soil protein (GRSP) was extracted from 1-g samples (four plots per treatment) with 100 mM sodium pyrophosphate, pH 9.0, at 121 °C in three extraction cycles. Extracts were pooled and quantified by using the Bradford protein assay. Concentrations of GRSP and total carbon (C) in aggregates were linearly related across aggregate size classes for all treatments (GRSP = 0.101C + 0.56, r² = 0.95). No tillage had significantly greater whole soil GRSP than did CT or ORG (P = 0.01). Mean values for GRSP in aggregates of NT were higher than for CT or ORG aggregates by 0.53 and 0.66 mg g⁻¹ aggregates, respectively. There were no differences among treatments in GRSP concentrations in fine material. In NT the concentration of GRSP increased as aggregate size increased in contrast to the disturbed treatments, CT or ORG, where there were no differences in GRSP concentration across aggregate size fractions. Larger proportions of GRSP were distributed in macroaggregates of NT compared to CT and ORG in contrast to larger proportions in microaggregates of CT and ORG than in NT. Although soil disturbance in ORG farming is greater than for CT farming, both treatments had similar GRSP concentrations and distributions.     

Soil carbon and nitrogen accumulation with long-term no-till versus moldboard plowing overestimated with tilled-zone sampling depths

Numerous investigators of tillage system impacts on soil organic carbon (OC) or total nitrogen (N) have limited their soil sampling to depths either at or just below the deepest tillage treatment in their experiments. This has resulted in an over-emphasis on OC and N changes in the near-surface zones and limited knowledge of crop and tillage system impacts below the maximum depth of soil disturbance by tillage implements. The objective of this study was to assess impacts of long-term (28 years) tillage and crop rotation on OC and N content and depth distribution together with bulk density and pH on a dark-colored Chalmers silty clay loam in Indiana. Soil samples were taken to 1 m depth in six depth increments from moldboard plow and no-till treatments in continuous corn and soybean–corn rotation. Rotation systems had little impact on the measured soil properties; OC content under continuous corn was not superior to the soybean–corn rotation in either no-till or moldboard plow systems. The increase in OC (on a mass per unit area basis) with no-till relative to moldboard plow averaged 23 t ha⁻¹ to a constant 30 cm sampling depth, but only 10 t ha⁻¹ to a constant 1.0 m sampling depth. Similarly, the increase in N with no-till was 1.9 t ha⁻¹ to a constant 30 cm sampling depth, but only 1.4 t ha⁻¹ to a constant 1.0 m sampling depth. Tillage treatments also had significant effects on soil bulk density and pH. Distribution of OC and N with soil depth differed dramatically under the different tillage systems. While no-till clearly resulted in more OC and N accumulation in the surface 15 cm than moldboard plow, the relative no-till advantage declined sharply with depth. Indeed, moldboard plowing resulted in substantially more OC and N, relative to no-till, in the 30–50 cm depth interval despite moldboard plowing consistently to less than a 25 cm depth. Our results suggest that conclusions about OC or N gains under long-term no-till are highly dependent on sampling depth and, therefore, tillage comparisons should be based on samples taken well beyond the deepest tillage depth.     

Factors contributing to temporal stability in spatial patterns of water content in the tillage zone

The rates of many biological processes vary across an agricultural landscape in response to the spatial patterns of water content in the tillage zone. Although, water content varies temporally through the growing season, the combined effects of soil properties, landscape attributes, tillage or position relative to the crop row on the temporal variation in the spatial pattern in soil water content are not well understood. We measured the soil water content (0–0.20 m) regularly through three growing seasons at 32 positions along each of two transects in a side-by-side comparison of corn under conventional tillage (plowing and secondary tillage) and no till in order to identify factors with the strongest influence on the spatial patterns in water content. The tillage comparison traversed a landscape in which the clay content (cl) varied from 5.8 to 37.4% and the organic carbon content (OC) varied from 0.9 to 3.9%. The spatial pattern in water contents during wetting and drying events were temporally stable, as reflected in R²>0.7 of correlation analysis of water contents on successive measurement dates. Multiple regression analyses indicated that the water contents, averaged over all measurement dates, were positively correlated with cl and ln(OC) and were smaller in the row than the inter-row position. The reduction in water content due to conventional tillage was diminished with increasing OC. However, application of multiple regression analyses to each set of water contents measured on a given day for each year indicated that the impact of soil properties, tillage and position relative to the row varied within and among seasons.     

Effect of reduced tillage on weeds and soil organisms in winter wheat and summer maize cropping on Humic Andosols in Central Japan

Although reduced tillage (RT) may preserve soil biota and improve the productivity and sustainability of arable lands in temperate regions, the extension of RT is limited by difficulties in controlling weeds. We studied the effect of RT without herbicide application on weed communities and soil biota in a 1-year 2-crop rotation system with winter wheat (Triticum aestivum L.) and maize (Zea mays L.) on Andosols in Japan. RT of the surface 3 cm and conventional moldboard plowing (CT) were conducted before seeding twice per year. For the first 3 years, from autumn 1997 to spring 2000, one field was managed with RT and another with CT. For the second 3 years, from autumn 2000 to spring 2003, RT and CT were conducted in two replicated plots in each field. Weed communities and soil biota were studied in the last 2 years. Dominant weed species in winter wheat cropping were Italian ryegrass (Lolium multiflorum Lam.) in 2002 and common vetch (Vicia angustifolia L.) in 2003, and their biomass was high where RT or CT was continuously conducted. Switching of tillage methods, from RT to CT or vice versa, reduced the biomass of winter weeds. In summer maize cropping, several annual and perennial weed species tended to increase under RT in the second 3 years. However, redroot pigweed (Amaranthus retroflexus L.), the most dominant weed in 2002 and 2003, responded to tillage inconsistently and its biomass was not always increased by RT. Species diversity of winter weeds was decreased by CT conducted in the first 3 years, and that of summer weeds was decreased by CT conducted in the second 3 years. The seedbank in the 0–10-cm soil layer under recent RT was large (7200–16 300 seeds m⁻²) compared with that under CT (2900–7300 seeds m⁻²). The microbial substrate-induced respiration (SIR) and the population densities of nematodes and mites were higher under RT in the second 3 years and were not affected by previous tillage practices. Both were highly correlated with soil total nitrogen. The positive effect of RT on these soil organisms was primarily attributable to the accumulation of organic matter in soil, but not to plant cover as a result of incomplete weed control by RT. Occasional adoption of RT in current CT systems may be effective at enriching soil organisms with little risk of weed infestation.     

Effects of tillage systems in dryland farming on near-surface water content during the late winter period

Tillage systems modify, at least temporarily, some of the physical properties of soil, such as soil porosity. Tillage also has an indirect effect on soil water content throughout the growth cycle, particularly in areas with a Mediterranean climate. This paper presents the results of monitoring the water content in the topsoil (0–0.20 m) of three adjacent plots during February to May cycles starting in 1994–1995 and ending in 1998–1999. Each of the plots had a surface area of 2700 m², an 8% slope and Calcic Cambisol soil. Starting in 1994, three different tillage systems were applied: conventional tillage, which is typical of the area (CT); minimum tillage (MT); and no-tillage (NT). Two vertical 200 mm TDR probes were permanently installed in each plot and measurements were taken every week. The results show that, under an NT system, the soil had significantly higher water content than the other two soil plots. However, this increased quantity of water did not denote increased crop production; on the contrary, these preliminary data point to a decrease in crop production.     

Plant-water relations,crop growth and grain yield of spring barley in relation to tillage methods

The influence of tillage methods on plant water status was measured in spring barley on a sandy loam soil (Wighill series) in 1976. Three methods of tillage were used: direct drilling, tine cultivation to 12.5 cm depth, and moldboard plowing to 20 cm depth. Soil bulk density was higher in the 0–5 and 5–10 cm layers of the direct-drilled plots. Soil strength was also higher in the direct-drilled plots to 22.8 cm depth compared with plowed plots, and to 15.2 cm depth compared wiht tine-cultivated plots. Thje only significant effect on soil water content (measured to 90 cm depth) was between 80 and 114 days from planting when extraction from the 0–10 cm depth was greater in the direct-drilled plots compared with the plowed plots, and at 20 cm depth greater in plowed plots than in direct-drilled plots. There were no significant differences between tillage methods in leaf water potential, above-ground dry matter produced, and grain yield.