Model performance of tree height-diameter relationships in the central Congo Basin

Key message

Tree heights in the central Congo Basin are overestimated using best-available height-diameter models. These errors are propagated into the estimation of aboveground biomass and canopy height, causing significant bias when used for calibration of remote sensing products in this region.

Context

Tree height-diameter models are important components of estimating aboveground biomass (AGB) and calibrating remote sensing products in tropical forests.

Aims

For a data-poor area of the central Congo Basin, we quantified height-diameter model performance of local, regional and pan-tropical models for their use in estimating AGB and canopy height.

Methods

At three old-growth forest sites, we assessed the bias introduced in height estimation by regional and pan-tropical height-diameter models. We developed an optimal local model with site-level randomizations accounted for by using a mixed-effects modeling approach. We quantified the error propagation of modeled heights for estimating AGB and canopy height.

Results

Regional and pan-tropical height-diameter models produced a significant overestimation in tree height, propagating into significant overestimations of AGB and Lorey’s height. The pan-tropical model accounting for climatic drivers performed better than the regional models. We present a local height-diameter model which produced nonsignificant errors for AGB and canopy height estimations at our study area.

Conclusion

The application of general models at our study area introduced bias in tree height estimations and the derived stand-level variables. Improved delimitation of regions in tropical Africa with similar forest structure is needed to produce models fit for calibrating remote sensing products.

     

The effects of forest type on soil microbial activity in Changbai Mountain,Northeast China

Key message

Forty years after clear-cutting mixed old-growth forest (broadleaf/Korean pine) in the Changbai Mountain area (Northeast China), a mixed forest with natural broadleaf regeneration and larch plantation displayed larger microbial biomass and activity in the soil than either a naturally regenerated birch forest or a monospecific spruce plantation.

Context

Clear-cutting with limited restoration effort was until the end of the twentieth century the norm for managing primary forests in Northeast China. Forest restoration plays an important role in the recovery of soil quality after clear-cutting, but the effects of different regeneration procedures on forest soil quality remain poorly known in Northeast China.

Aims

We assessed the effects of three regeneration procedures, i.e., (i) naturally regenerated birch forest, (ii) spruce plantation, and (iii) naturally regenerated broadleaf species interspersed with planted larch on soil quality and microbial activity in the Changbai Mountain area. An old-growth mixed broadleaf/Korean pine forest was used as a reference.

Methods

Physical and chemical properties and microbial biomass were recorded in the soil. Basal respiration and carbon mineralization were measured with a closed-jar alkali-absorption method.

Results

Microbial biomass was smaller in the birch forest and spruce plantation than in the old-growth and the mixed broadleaf/larch forests. Moreover, microbial biomass, microbial quotient, and potentially mineralizable carbon were larger in the mixed broadleaf/larch than in the birch forest, while no difference was found between spruce plantation and birch forest for microbial biomass and microbial quotient. Basal respiration and metabolic quotient were larger in the birch forest as compared to the three other forest types, indicating a larger energy need for maintenance of the microbial community and lower microbial activity in the naturally regenerated birch forest.

Conclusion

Mixed broadleaf/larch forest displayed a larger microbial biomass and higher substrate use efficiency of the soil microbial community than either naturally regenerated birch forest or spruce plantation. The combined natural and artificial regeneration procedure (mixed broadleaf-larch forest) seems better suited to restore soil quality after clear-cutting in the Changbai Mountain.

     

From inventory to consumer biomass availability—the ITOC model

Key message The application of the ITOC model allows the estimation of available biomass potentials from forests on the basis of National Forest Inventory data. The adaptation of the model to country-specific situations gives the possibility to further enhance the model calculations.

Context

With the rising demand for energy from renewable sources, up-to-date information about the available amount of biomass on a sustainable basis coming from forests became of interest to a wide group of stakeholders. The complexity of answering the question about amounts of biomass potentials from forests thereby increases from the regional to the European level.

Aims

The described ITOC model aims at providing a tool to develop a comparable data basis for the actual biomass potentials for consumption.

Methods

The ITOC model uses a harmonized net annual increment from the National Forest Inventories as a default value for the potential harvestable volume of timber. The model then calculates the total theoretical potential of biomass resources from forests. By accounting for harvesting restrictions and losses, the theoretical potential of biomass resources from forests is reduced and the actual biomass potentials for consumption estimated.

Results

The results from ITOC model calculations account for the difference between the amounts of wood measured in the forests and the actual biomass potentials which might be available for consumption under the model assumptions.

Conclusion

The gap between forest resource assessments and biomass potentials which are available for consumption can be addressed by using the ITOC model calculation results.

     

Pertinence of reactive,active, and robust adaptation strategies in forest management under climate change

Key message

Pertinence of alternative adaptation strategies to business as usual, namely reactive, active, and robust adaptation strategies, can be evaluated by incorporating the expected costs and benefits of adaptation, climate change uncertainty, and the risk attitudes of decision-makers.

Context

Forest management is used to coping with risky and uncertain projections and estimates. However, climate change adds a major challenge and necessitates adaptation in many ways.

Aims

This paper highlights the dependency of the decisions on adaptation strategies to four aspects of forest management: (i) the costs of mitigating undesirable climate change impacts on forests, (ii) the value of ecosystem goods and services to be sustained, (iii) uncertainties about future climate trajectories, and (iv) the attitude of decision-makers towards risk (risk aversion level).

Methods

We develop a framework to evaluate the pertinence of reactive, active, and robust adaptation strategies in forest management in response to climate change.

Results

Business as usual may still be retained if the value of the forest and cost of climate impacts are low. Otherwise, it is crucial to react and facilitate the resilience of affected forest resources or actively adapt in advance and improve forest resistance. Adaptation should be robust under any future climate conditions, if the value of the ecosystem, the impacts from climatic changes, and the uncertainty about climate scenarios are very high.

Conclusion

The decision framework for adaptation should take into account multiple aspects of forest management under climate change towards an active and robust strategy.

     

The effects of temporal differences between map and ground data on map-assisted estimates of forest area and biomass

Key message

When areas of interest experience little change, remote sensing-based maps whose dates deviate from ground data can still substantially enhance precision. However, when change is substantial, deviations in dates reduce the utility of such maps for this purpose.

Context

Remote sensing-based maps are well-established as means of increasing the precision of estimates of forest inventory parameters. The general practice is to use maps whose dates correspond closely to the dates of ground data. However, as national forest inventories move to continuous inventories, deviations between map and ground data dates increase.

Aims

The aim was to assess the degree to which remote sensing-based maps can be used to increase the precision of estimates despite differences between map and ground data dates.

Methods

For study areas in the USA and Norway, maps were constructed for each of two dates, and model-assisted regression estimators were used to estimate inventory parameters using ground data whose dates differed by as much as 11 years from the map dates.

Results

For the Minnesota study area that had little change, 7-year differences in dates had little effect on the precision of estimates of proportion forest area. For the Norwegian study area that experienced considerable change, 11-year differences in dates had a detrimental effect on the precision of estimates of mean biomass per unit area.

Conclusions

The effects of differences in map and ground data dates were less important than temporal change in the study area.

     

Additive tree biomass equations for <Emphasis Type="Italic">Betula platyphylla</Emphasis> Suk. plantations in Northeast China

Key message

A new system of additive tree biomass equations was developed for juvenile white birch plantations based on tree diameter at breast height (DBH) and tree height (HT). Compared with previous equations developed for natural white birch forests, the new system included one more biomass component and provided more accurate predictions.

Context

Accurate estimates of tree component and total biomass are necessary for evaluating alternative forest management strategies for biomass feedstock, carbon sequestration, and products. Previous biomass equations developed for white birch trees in natural stands provided substantially biased predictions for white birch plantations.

Aims

A new system of additive tree biomass equations was developed for juvenile white birch plantations in the northeastern China.

Methods

With destructive biomass sampling data from 501 trees sampled from white birch provenance and family trails at ages 7, 9, 10, and 13 in three provinces, a system of nonlinear additive tree biomass equations based on DBH and tree height was developed using the nonlinear seemingly unrelated regressions (NSUR) approach.

Results

Compared with previously published equations developed for natural white birch forests, the new system provided more accurate predictions of white birch tree component and aboveground and total biomass, especially of branch, foliage, and root biomass.

Conclusion

The new system extended the applicability of biomass equations to white birch plantations in the northeastern China.

     

Coordination of morphological and physiological traits in naturally recruited <Emphasis Type="Italic">Abies alba</Emphasis> Mill. saplings: insights from a structural equation modeling approach

Key message

Apical dominance ratio (ADR), reported as a suitable indicator for the growth and development of Abies alba , is concurrently determined by morphological and functional plant traits. Structural equation modeling (SEM) proved here to be an effective multivariate technique to represent the contribution of different variables in explaining ADR variability.

Context

During the natural recruitment of understory tree saplings, the light environment and competition among individuals may change drastically as well as their growth patterns. To cope with this, saplings have a remarkable ability to accordingly modify their physiology and morphology. Therefore, understanding the ecological significance of plant structural patterns requires an integrated view of morphological, architectural, and physiological attributes of plants.

Aims

Here, we applied a SEM approach to understand the mechanisms influencing the ADR, recently reported as suitable indicator of the growth conditions favoring silver fir (Abies alba Mill.) natural regeneration in Mediterranean areas.

Methods

A series of plant traits (e.g., root-collar diameter, leaf mass per area, and isotope composition) were combined into two main latent variables, namely Morphology and Physiology, to account for their relative contribution in explaining the ADR variability.

? Results

Our results underline the importance of variables accounting for the photosynthetic capacity and leaf economics in determining ADR; among them, leaf mass per area (LMA) emerged as an important driving variable.

? Conclusion

SEM proved to be an effective multivariate technique to represent the coordination of different morphological and functional variables in explaining ADR variability in silver fir.

     

Genetic variation and genotype by environment interaction in the susceptibility of <Emphasis Type="Italic">Abies nordmanniana</Emphasis> (Steven) Spach to the fungus <Emphasis Type="Italic">Neonectria neomacrospora</Emphasis> (Booth &amp; Samuels) Mantiri &amp; Samuels

Key message

Pronounced clonal variation and moderate to high broad-sense heritability estimates of susceptibility to Neonectria neomacrospora were found in Abies nordmanniana in three sites. Significant genotype by environment (G × E) interaction was detected across sites.

Context

Nordmann fir, a widely used Christmas tree species in Europe, has, since 2011, been increasingly damaged by a canker disease caused by Neonectria neomacrospora.

Aims

The objective was to study the genetic variation and genotype by environment interaction in the susceptibility of Nordmann fir to N. neomacrospora.

Methods

Damage caused by N. neomacrospora was evaluated using a visual scale in three Nordmann fir clonal seed orchards in Denmark, partly containing the same clones.

Results

Damage due to N. neomacrospora was substantial at all three sites, and no clone was completely resistant to N. neomacrospora, but a large genetic variation in the susceptibility was detected among clones. Estimates of single-site individual broad-sense heritability for susceptibility varied between 0.38 and 0.47. The average type-B genetic correlation for damage score across sites was 0.34.

Conclusion

Genetic variation was very pronounced, and significant G × E interactions were detected for susceptibility. Further investigations of narrow-sense heritability, expression of the trait in younger material, and identification of the cause of G × E for N. neomacrospora susceptibility in Nordmann fir across different sites are recommended.

     

Improving the design of long-term monitoring experiments in forests: a new method for the assessment of local soil variability by combining infrared spectroscopy and dendrometric data

Key message

Near- and mid-infrared spectroscopy allows for the detection of local patterns of forest soil properties. In combination with dendrometric data, it may be used as a prospective tool for determining soil heterogeneity before setting up long-term forest monitoring experiments.

Context

Forest soils and stands generally exhibit higher spatial heterogeneity than other terrestrial ecosystems. This variability needs be taken into account before setting up long-term forest monitoring experiments to avoid multiple interactions between local heterogeneity and the factors tested in the experiment.

Aims

We hypothesized that raw near- and mid-infrared spectra can be used as an integrated proxy of a large set of soil properties. The use of this method, in combination with dendrometric data, should provide a quick and cost-effective tool for optimizing the design of experimental forest sites.

Methods

We assessed the local soil heterogeneity at 11 experimental sites in oak and beech stands, which belong to a new forest long-term ecological research (LTER) network. We used near- and mid-infrared spectroscopy in soil and litter samples. The spectra were subjected to principal components analyses (PCA) to determine the intra-site variability of the soil and litter layers.

Results

Based on mapped PCA coordinates and basic dendrometric data, it was possible to design the experiment and minimize the interactions between the treatment layout and the tested variables. The method was validated with chemical analyses of the soil. No interaction was detected at the set-up of the experiment between the treatment layout and chemical soil properties (C, N, C/N ratio, pH, CEC, Al, Mg, P₂O₅, Fe, Mn, Na, and K).

Conclusion

Near-infrared (NIR) and mid-infrared (MIR) spectroscopy is a useful tool for characterizing the overall heterogeneity of soil chemical properties. It can be used without any preliminary calibration. In combination with dendrometric data, it provides a reliable method for optimizing LTER plots in different types of ecosystems.

     

Comparison of methods used in European National Forest Inventories for the estimation of volume increment: towards harmonisation

Key message

The increment estimation methods of European NFIs were explored by means of 12 essential NFI features. The results indicate various differences among NFIs within the commonly acknowledged methodological frame. The perspectives for harmonisation at the European level are promising.

Context

The estimation of increment is implemented differently in European National Forest Inventories (NFIs) due to different historical origins of NFIs and sampling designs and field assessments accommodated to country-specific conditions. The aspired harmonisation of increment estimation requires a comparison and an analysis of NFI methods.

Aims

The objective was to investigate the differences in volume increment estimation methods used in European NFIs. The conducted work shall set a basis for harmonisation at the European level which is needed to improve information on forest resources for various strategic processes.

Methods

A comprehensive enquiry was conducted during Cost Action FP1001 to explore the methods of increment estimation of 29 European NFIs. The enquiry built upon the preceding Cost Action E43 and was complemented by an analysis of literature to demonstrate the methodological backgrounds.

Results

The comparison of methods revealed differences concerning the NFI features such as sampling grids, periodicity of assessments, permanent and temporary plots, use of remote sensing, sample tree selection, components of forest growth, forest area changes, sampling thresholds, field measurements, drain assessment, involved models and tree parts included in estimates.

Conclusion

Increment estimation methods differ considerably among European NFIs. Their harmonisation introduces new issues into the harmonisation process. Recent accomplishments and the increased use of sample-based inventories in Europe make perspectives for harmonised reporting of increment estimation promising.

     

Can forest structural diversity be a response to anthropogenic stress? A case study in old-growth fir <Emphasis Type="Italic">Abies alba</Emphasis> Mill. stands

Key message

From 1973 to 1991, Polish SO ₂ emissions above 3250 Gg/year resulted in a decline of fir Abies alba Mill. After stresses connected with these emissions, five main diameter at breast height (DBH) structural types were described. This type of heterogeneous forest structure is supposed to increase forest resistance and resilience to abiotic, biotic and anthropogenic disturbances.

Context

The analyses of forest structure are important under the current scenario of global change, since heterogeneous structures allow for better responses to disturbances. Forests with more complex structures should present greater vitality.

Aims

The main hypotheses were as follows: (1) the temporal changes of atmospheric SO₂ emissions caused (a) the abrupt changes in the tree DBH radial increment and (b) the death of fir trees; and (2) atmospheric SO₂ emissions and related fir decline and recovery processes ultimately result in the development of stands characterised by diverse DBH structures.

Methods

Radial growth trends of 49 and 215 fir trees in the older and younger generations, respectively, and 85 dead fir trees were evaluated. Using data collected in 32 stands, the DBH structural types were identified, and the shapes of these types were illustrated.

Results

The structural diversification of forest patches may influence forest resistance and resilience to disturbances; five main structural types were identified: ML1 and ML2 represent DBH distributions of multi-layered stands, and OS, TS1 and TS2 represent DBH distributions of one- and two-storied stands.

Conclusion

Structural diversity of forests was a response to SO₂ emissions; fir trees had the ability to increase their radial growth, although there were still high SO₂ emissions.

     

Deciphering the ozone-induced changes in cellular processes: a prerequisite for ozone risk assessment at the tree and forest levels

Key message

Ozone, one of the major atmospheric pollutants, alters tree growth, mainly by decreasing carbon assimilation and allocation to stems and roots. To date, the mechanisms of O₃ impact at the cellular level have been investigated mainly on young trees grown in controlled or semi-controlled conditions. In the context of climate change, it is necessary to introduce a valuable defence parameter in the models that currently predict O₃ impact on mature trees and the carbon sequestration capacity of forest ecosystems.

Context

Air pollution is an important factor that affects negatively forest ecosystems. Among oxidative air pollutants, ozone is considered as the most toxic in terms of impact on vegetation.

Aims

This paper focuses on the negative impacts of ozone on trees in controlled conditions or in their natural environment. The current knowledge of the responses at cell level is presented and ways to improve their use for ozone risk assessment of forest stands are discussed.

Methods

Information was collected from original papers or reviews, providing an overview of the research conducted over the last 60 years.

Results

The negative effects of ozone on carbon assimilation and tree biomass production were reviewed and discussed, with a focus on effects on cell processes implied in cell defence, including stomatal regulation, detoxification, signalling, and biosynthesis of wood compound.

Conclusion

In the context of increasing significance of O₃ flux approach, this review intends to shed light into the black box of defence processes, which are playing a crucial part within the effective O₃ dose modelling. Today, it is recognized that tropospheric ozone inhibits tree growth and its role on the future carbon sink of the forest ecosystem is discussed along with the combination of other environmental factors like elevated temperature, water, and nitrogen supply, likely to be modified in the context of climate change.

     

Forest modelling: the gamma shape mixture model and simulation of tree diameter distributions

? Key message

New types of distribution functions are needed to model the dynamics of stands where important age classes are represented by few trees. In this study the gamma shape mixture model and two simulation methods were used for generating tree diameter data.

? Context

To analyse forest dynamics, it is necessary to know distribution of the characteristics (mainly tree diameters) of trees forming particular developmental phases. In many forest inventories, the measurement of large diameter at breast height (DBH) samples is practically impossible. In this case, DBH distributions can be generated using theoretical models.

? Aims

The aim of this study was to assess the precision of the approximation of empirical DBH data using the gamma shape mixture (GSM) model and kernel density estimation. The strengths and weaknesses of the two simulation methods were presented and discussed.

? Methods

The GSM model was adopted to approximate empirical DBH data collected in 20 near-natural stands. Two simulation methods were used: (a) the procedure based on a multimodal distribution and gamma random numbers (MDGR procedure) and (b) MCMC techniques with Metropolis–Hastings sampling (MH method).

? Results

The GSM model precisely fitted the investigated DBH distributions. The MDGR procedure was slightly more precise than the MH method, especially in the case of the samples of 250 DBHs. The level of homogeneity within the drawn DBH sets was similar for all samples.

? Conclusion

The GSM model is very flexible. The DBH random variates, generated with the use of analysed procedures, represented all tree generations being significant from a biological point of view.

     

Recent growth changes in Western European forests are driven by climate warming and structured across tree species climatic habitats

Key message

Recent growth changes (1980–2007) in Western European forests strongly vary across tree species, and range from +42% in mountain contexts to ?17% in Mediterranean contexts. These changes reveal recent climate warming footprint and are structured by species' temperature (?) and precipitation (+) growing conditions.

Context

Unprecedented climate warming impacts forests extensively, questioning the respective roles of climatic habitats and tree species in forest growth responses. National forest inventories ensure a repeated and spatially systematic monitoring of forests and form a unique contributing data source.

Aims

A primary aim of this paper was to estimate recent growth changes in eight major European tree species, in natural contexts ranging from mountain to Mediterranean. A second aim was to explore their association with species’ climatic habitat and contemporary climate change.

Methods

Using >315,000 tree increments measured in >25,000 NFI plots, temporal changes in stand basal area increment (BAI) were modelled. Indicators of climate normals and of recent climatic change were correlated to species BAI changes.

Results

BAI changes spanned from ?17 to +42% over 1980–2007 across species. BAI strongly increased for mountain species, showed moderate/no increase for generalist and temperate lowland species and declined for Mediterranean species. BAI changes were greater in colder/wetter contexts than in warmer/drier ones where declines were observed. This suggested a role for climate warming, further found more intense in colder contexts and strongly correlated with species BAI changes.

Conclusion

The predominant role of climate warming and species climatic habitat in recent growth changes is highlighted in Western Europe. Concern is raised for Mediterranean species, showing growth decreases in a warmer climate with stable precipitation.

     

Factors determining enzyme activities in soils under <Emphasis Type="Italic">Pinus halepensis</Emphasis> and <Emphasis Type="Italic">Pinus sylvestris</Emphasis> plantations in Spain: a basis for establishing sustainable forest management strategies

Key message

Water availability and soil pH seem to be major constraints for enzyme activities in calcareous soils under Pinus halepensis and acidic soils under Pinus sylvestris plantations respectively. Proposals for improving enzyme activities may include the promotion of broadleaf species to increase soil pH and the modulation of stand density or the implementation of soil preparation techniques to facilitate water infiltration.

Context

Soil enzymes play a key role in nutrient turnover in forest ecosystems, as they are responsible for the transformation of organic matter into available nutrients for plants. Enzyme activities are commonly influenced by temperature, humidity, nutrient availability, pH, and organic matter content.

Aims

To assess the differences between enzyme activities in calcareous soils below Pinus halepensis and acidic soils below Pinus sylvestris plantations in Spain and to trace those differences back to edapho-climatic parameters to answer the questions: Which environmental factors drive enzyme activities in these soils? How can forest management improve them?

Methods

The differences in climatic, soil physical, chemical, and biochemical parameters and the correlations between these parameters and enzyme activities in soils were assessed.

Results

Low pH and high level of phenols in acidic soils under Pinus sylvestris and water deficit in calcareous soils under Pinus halepensis plantations appeared to be the most limiting factors for enzyme activities.

Conclusion

Options such as the promotion of native broadleaf species in the Pinus sylvestris stands and the modulation of Pinus halepensis stand density or the implementation of soil preparation techniques may improve enzyme activities and, therefore, nutrient availability.

     

Remote estimation of canopy leaf area index and chlorophyll content in Moso bamboo (<Emphasis Type="Italic">Phyllostachys edulis</Emphasis> (Carrière) J. Houz.) forest using MODIS reflectance data

Key message

We estimated the leaf area index (LAI) and canopy chlorophyll content (CC) of Moso bamboo forest by using statistical models based on MODIS data and field measurements. Results showed that the statistical model driven by MODIS data has the potential to accurately estimate LAI and CC, while the structure of the calibration models varied between on- and off-years because of the different leaf change and bamboo shoot production characteristics between these types of years.

Context

LAI and CC (gram per square meter of ground area) are important parameters for determining carbon exchange between Moso bamboo forest (Phyllostachys edulis (Carrière) J. Houz.) and the atmosphere.

Aims

This study evaluated the ability of a statistical model driven by MODIS data to accurately estimate the LAI and CC in Moso bamboo forest, and differences in the LAI and CC between on-years (years with great shoot production) and off-years (years with less shoot production) were analyzed.

Methods

The LAI and CC measurements were collected in Anji County, Zhejiang Province, China. Indicators of LAI and CC were calculated from MODIS data. Then, a regression analysis was used to build relationships between the LAI and CC and various indicators on the basis of leaf change and bamboo shoot production characteristics of Moso bamboo forest.

Results

LAI and CC were accurately estimated by using the regression analysis driven by MODIS-derived indicators with a relative root mean squared error (RMSEr) of 9.04 and 13.1%, respectively. The structure of the calibration models varied between on- and off-years. Long-term time series analysis from 2000 to 2015 showed that LAI and CC differed largely between on- and off-years.

Conclusion

This study demonstrates that LAI and CC of Moso bamboo forest can be estimated accurately by using a statistical model driven by MODIS-derived indicators, but attention should be paid to differences in the calibration models between on- and off-years.

     

Annual volume increment of the European forests—description and evaluation of the national methods used

Key message

In order to obtain the necessary information for decision making etc., it is of increasing importance to be able to assess increment in a reliable way. Only repeated measurements on permanent sample plots in national forest inventories can provide accurate and comprehensive information on the various components of annual increment. Such inventory systems are increasingly employed in European countries. The felling/increment ratio, characterizing wood use sustainability, should be expressed as the ratio of felled living trees (excluding dead trees) and net increment.

Context

Reporting of gross and net annual increment is an element of international forest resource assessments and crucial for sustainable forest management. A number of approaches exist for the estimation of increment and its various sub-components.

Aims

The main objectives of the study are to assess in detail what methods European countries have used and are planning to use in the future for international reporting of increment. Also, the usefulness of the various approaches for the assessment of increment is evaluated.

Methods

A questionnaire asking about their assessment methods was distributed among the UNECE/FAO national correspondents of all European countries and members of the UNECE/FAO Team of Specialists on Monitoring Sustainable Forest Management. Databases of the Temperate and Boreal Forest Resource Assessment 2000 and of the State of Europe’s Forests 2011 were also used. Furthermore, the methodological background was described on the basis of relevant literature sources and some examples for country groups presented.

Results

Countries have indicated what methods they used for assessment of various increment components, and the percentage of countries, forest area, and growing stock corresponding to these replies has been calculated. With regard to gross annual increment, these metrics represent about one third for inventories based on permanent sample plots, but this percentage is on the increase.

Conclusion

The concept of the “control method” for forest management was developed more than 100 years ago but only utilized at the local level. The same methodology is now widely used at the national and regional level due to the implementation of modern national forest inventories using permanent sample plots. Care should be taken to utilize the data correctly for international forest resource assessments, in order to, e.g., avoid double counting of dead trees.

     

The effect of surface fire on tree ring growth of <Emphasis Type="Italic">Pinus radiata</Emphasis> trees

Key message

Pinus radiata trees showed significantly reduced basal area increments and increased latewood/earlywood ratios, when their stem was charred by surface fires even if no needle damage occurred. An interaction of fire damage and precipitation on growth was observed.

Context

Heat from forest fires is able to penetrate beyond the bark layer and damage or completely kill a tree’s cambium. Short-term growth reductions following surface fires have been reported for some species. However, most studies have in common that they describe a compound effect of stem and foliage damage.

Aims

This study investigated the impact of surface fires on the radial growth of Pinus radiata, where only the stem of trees was charred, while no needle damage was recorded.

Methods

Tree ring measurements were performed on cores obtained at breast height. Analysis of variance and tests, based on annual basal area increment values were calculated to quantify pre- and post-fire growth differences of tree ring width and latewood/earlywood ratios.

Results

The analysis revealed significant growth reductions following a surface fire on P. radiata in the year on which the fire occurred as well as in the following year. As a consequence of the fire, basal area increment and latewood/earlywood ratios were significantly reduced. An interaction of fire damage and precipitation on growth was observed.

Conclusion

The obtained results show how fires without crown damage can affect growth and tree ring structure of P. radiata trees and indicate that stem char could be associated with a significant decrease in ring width and latewood/earlywood ratio.

     

Mixing oak and pine trees does not improve the functional response to severe drought in central French forests

Key message

Mixing sessile oak and Scots pine in central France to reduce intraspecific competition for water resources did not improve the ability of these two species to withstand severe drought during the summer.

Context

In order to reduce the impact of increasingly extreme droughts on forests, managers must adapt their practices to future climate conditions. Maintaining a greater diversity of tree species in temperate forest ecosystems is one of the recommended options.

Aims

We addressed how interactions between sessile oak and Scots pine in mixed forests in central France affect their functional response to drought.

Methods

We characterized the carbon isotope composition (δ¹³C) in the tree growth rings formed during wet (2001, 2007) or dry (2003, 2004) summers for each of the two species growing both in pure and in mixed stands in order to compare the effect of stand composition on variations in carbon isotope discrimination (Δ¹³C) among contrasted years.

Results

The severe drought in 2003 induced a strong decrease in Δ¹³C for all trees and in all stands as compared to 2001. This decrease was greater in pine than in oak. There was no significant difference between pure and mixed stands in the response of either species to drought.

Conclusion

Mixing sessile oak and Scots pine in stands in central France does not improve the ability of either species to withstand severe drought during the summer.