Sugarcane yield response to calcium silicate on Florida mineral soils

Abstract

Silicon (Si) is a beneficial nutrient for sugarcane (Saccharum spp.) and yield responses to Si amendment have been determined on soils with low soluble Si. Because a soil test Si calibration has not been published for sugarcane grown on Florida mineral soils, the objectives were to determine sugarcane yield response to silicon soil amendment on two mineral soils (Entisol and Spodosol) and to relate sucrose yield to soil-extractable Si. Calcium silicate application rates were 0, 3.4, and 6.7?Mg ha^?1 (Site 1) and 0, 2.2, 4.5, and 6.7?Mg ha^?1 (Site 2) in small-plot (120 m² plot^?1) experiments, with Si application resulting in significant increases in biomass and sucrose ha^?1. Calcium silicate requirements of 6.7 and 4.3?Mg ha^?1 were determined with initial acetic acid-extractable Si of 21 and 46?g m^?3, respectively. Nonlinear models indicated that Si amendments will be required with acetic acid-extractable Si <105?g m^?3.     

Problem of Applying Sodium Selenate to Increase Selenium Concentration in Grassland Plants in Southern Belgium

In a survey of grasslands, mean selenium (Se) concentration in Holcus lanatus was 83 μg kg^?1 (less than 100 μg kg^?1, the minimal concentration protecting mammals from deficiency disorders). Despite rather high levels of soil extractable Se, plant Se availability was supposed to be low because of high soil humus concentration. A pot experiment with common grassland species showed contrasting responses to selenate addition (9 g Se ha^?1 yr^?1). Lolium perenne leaves reached 470 μg kg^?1, and Trifolium pratense reached 292 μg kg^?1. The controls were less than 100 μg kg^?1. Leaves of others species showed greater values both in control and treated series and no significant difference. In a second pot experiment, Melilotus albus, a supposed secondary accumulator, and Lolium perenne as a control were submitted to moderate increased selenate additions (up to 45 g Se ha^?1 yr^?1). The results confirmed that Melilotus albus was a better accumulator with a leaf concentration that could reach the toxicity level of 2 mg kg^?1.     

CALIBRATION OF SOIL AND PLANT SILICON ANALYSIS FOR RICE PRODUCTION*

Calibration of field crop response to nutrient availability is the bases for making a fertilizer recommendation from soil and tissue analyses. The purpose of this study was to evaluate and summarize results from a series of experiments on silicon (Si) fertilization of rice in the Everglades Agriculture Area. Twenty-eight rice field experiments were conducted from 1992 through 1996. The experiments consisted of 2 to 5 rates of calcium silicate applied to soils (Histosols) of varying Si soil-test values. Soil samples were taken before planting and analyzed for acetic acid (0.5 mol L^?1) extractable Si. Straw samples were collected at harvest and analyzed for total Si. Grain yield was determined. The “critical” levels for Si in the soil (point below which response to Si fertilizer is expected) calculated by the Cate & Nelson procedure was 19 mg Si L^?1 soil. The amount of silicon to correct Si deficiency in the soil and to obtain optimum rice yield was 1500, 1120 and 0 kg ha^?1 for low (<6 mg L^?1), medium (6 to 24 mg L^?1), and high (>24 mg L^?1) level of soil Si, respectively. Silicon in the straw was classified as high when Si concentration was >34 g kg^?1, medium when in between 17 and 34, and low when <17 g kg^?1 (3.4 and 1.7%, respectively).

     

“Egusi” melon seed yield,proximate content and soil nutrient changes with poultry manure fertilization

Abstract

“Egusi” melon (Colocynthis citrullus L.) is a seed vegetable whose yield is limited by nutrient supply. Two field experiments were conducted with “Egusi” melon at the Crops Research Farm of the Federal University of Agriculture, Abeokuta, Nigeria, to evaluate response of poultry manure (PM) rate on seed yield, seed proximate content, and changes in soil nutrients. The study was conducted from May to August 2013 and repeated same period in 2014 using PM at: 0, 2, 4, 6, 8, and 10 t ha^?1. With the first planting, seed yields of 458 and 452?kg?ha^?1 from applications of 6 and 8 t ha^?1 PM were similar with the highest of 522?kg?ha^?1 from application of 10 t ha^?1 PM. The second planting, with residual fertilizer effect had a higher seed yield of 242?kg?ha^?1 from application of 10 t ha^?1 PM. Number of seeds per fruit was higher; 183 seeds per fruit in the first planting and 163 seeds per fruit in the second planting, from plants treated with 10 t ha^?1 PM. Shelling percent was comparable in both experiments. It was 19.5% with application of 10 t ha^?1 PM and 33.4% with the unfertilized plants for the first planting but was 28.0% with application of 10 t ha^?1 PM and 31.3% with the unfertilized plants for the second planting. Seed crude protein, crude fiber and ash contents were enhanced with application of 10 t ha^?1 PM. Soil pH in the first planting was reduced from initial 6.8 to 6.6 with the unfertilized plants and to 6.7 with applications of 2 and 10 t ha^?1 PM, but increased to 7.1 with application of 6 t ha^?1 PM. In the second planting, it was reduced to 5.0 with applications of 0, 2 and 4 t ha^?1 PM but to 5.3, 5.1, and 5.2 with applications of 6, 8, and 10 t ha^?1 PM, respectively. The initial total N of 0.14% was reduced to 0.12% with applications of 6 and 8 t ha^?1 PM but to 0.11% with the other treatments in the first planting; but reduced to 0.08% with applications of 2 and 4 t ha^?1 PM and to 0.06 and 0.09% with applications of 8 and 10 t ha^?1 PM, respectively, in the second planting. Available P in the first planting was reduced from an initial 17.62?mg kg^?1 to 4.32?mg kg^?1with the control treatment and to 6.74 and 5.83?mg kg^?1 with applications of 2 and 4 t ha^?1 PM, respectively, but to 8.32 and 8.24 with applications of 8 and 10 t ha^?1 PM, respectively. In the second planting, it was reduced to 1.92?mg kg^?1with the control treatment and to 2.53 and 1.81?mg kg^?1 with applications of 2 and 4 t ha^?1 PM, respectively but to 1.90 and 1.56 with applications of 8 and 10 t ha^?1 PM, respectively. Application of 10 t ha^?1 PM supplying 19?kg N, 0.5?kg P and 27?kg K per ha was adequate for enhanced seed yield and proximate contents of “Egusi” melon.     

Optimal Acidity Indices for Soybean Production in Brazilian Oxisols

Soybean is an important crop for the Brazilian economy, and soil acidity is one of the main yield-limiting factors in Brazilian Oxisols. A field experiment was conducted during three consecutive years with the objective to determine soybean response to liming grown on Oxisols. Liming rates used were 0, 3, 6, 12, and 18 Mg ha^?1. Liming significantly increased grain yield in a quadratic trend. Ninety percent maximum economic grain yield (2900 kg ha^?1) was achieved with the application of about 6 Mg lime ha^?1. Shoot dry weight, number of pods per plant, and 100-grain weight were also increased significantly in a quadratic fashion with increasing liming rate from 0 to 18 Mg ha^?1. These growth and yield components had a significant positive association with grain yield. Maximum contribution in increasing grain yield was of number of pods per plant followed by grain harvest index and shoot dry weight. Uptake of nitrogen (N) was greatest and phosphorus (P) was least among macronutrients in soybean plant. Nutrient-use efficiency (kg grain per kg nutrient accumulation in grain) was maximum for magnesium (Mg) and lowest for N among macronutrients. Application of 3 Mg lime ha^?1 neutralized all aluminum ions in soil solution. Optimal acidity indices for 90% of maximum yield were pH 6.0, calcium (Ca) 1.6 cmol_c kg^?1, Mg 0.9 cmol_c kg^?1, base saturation 51%, cation exchange capacity (CEC) 4.8 cmol_c kg^?1, Ca/Mg ratio 1.9, Ca?/?potassium (K) ratio 5.6, and Mg/K ratio 3.0.     

Eucalyptus biochar application enhances Ca uptake of upland rice,soil available P,exchangeable K,yield, and N use efficiency of sugarcane in a crop rotation system

It was hypothesized that the application of eucalyptus biochar enhances nutrient use efficiencies of simultaneously supplied fertilizer, as well as provides additional nutrients (i.e., Ca, P, and K), to support crop performance and residual effects on subsequent crops in a degraded sandy soil. To test this hypothesis, we conducted an on‐farm field experiment in the Khon Kaen province of Northeastern Thailand to assess the effects of different application rates of eucalyptus biochar in combination with mineral fertilizers to upland rice and a succeeding crop of sugarcane on a sandy soil. The field experiment consisted of three treatments: (1) no biochar; (2) 3.1 Mg ha^?1 biochar (10.4 kg N ha^?1, 3.1 kg P ha^?1, 11.0 kg K ha^?1, and 17.7 kg Ca ha^?1); (3) 6.2 Mg ha^?1 biochar (20.8 kg N ha^?1, 6.2 kg P ha^?1, 22.0 kg K ha^?1, and 35.4 kg Ca ha^?1). All treatments received the same recommended fertilizer rate (32 kg N ha^?1, 14 kg P ha^?1, and 16 kg K ha^?1 for upland rice; 119 kg N ha^?1, 21 kg P ha^?1, and 39 kg K ha^?1 for sugarcane). At crop harvests, yield and nutrient contents and nitrogen (N) use efficiency were determined, and soil chemical properties and pH₀ monitored. The eucalyptus biochar material increased soil Ca availability (117 ± 28 and 116 ± 7 mg kg^?1 with 3.1 and 6.2 Mg ha^?1 biochar application, respectively) compared to 71 ± 13 mg kg^?1 without biochar application, thus promoting Ca uptake and total plant biomass in upland rice. Moreover, the higher rate of eucalyptus biochar improved CEC, organic matter, available P, and exchangeable K at succeeding sugarcane harvest. Additionally, 6.2 Mg ha^?1 biochar significantly increased sugarcane yield (41%) and N uptake (70%), thus enhancing N use efficiency (118%) by higher P (96%) and K (128%) uptake, although the sugar content was not increased. Hence, the application rate of 6.2 Mg ha^?1 eucalyptus biochar could become a potential practice to enhance not only the nutrient status of crops and soils, but also crop productivity within an upland rice–sugarcane rotation system established on tropical low fertility sandy soils.     

Soil-Applied Nitrogen and Composted Manure Effects on Soybean Hay Quality and Grain Yield

ABSTRACT

Grain yield in many soybean experiments fails to respond to fertilizer nitrogen (N). A few positive responses have been reported when soybean were grown in the southern U.S., when N was applied near flowering and when biosolids were added. In a previous study, low N concentrations of soybean forage in north Texas on a high pH calcareous soil were reported and thus, we suspected a N nutrition problem. Consequently, we initiated this study to determine whether selected preplant N sources broadcast and incorporated into a Houston Black clay (fine, smectitic, thermic Udic Haplusterts) might increase forage N concentration, forage yield, or soybean grain yield. In 2003, N was applied as ammonium nitrate (NH₄NO₃, AN) up to 112 kg N ha^{? 1} and dairy manure compost (DMC) was applied at rates of 4.9, 9.9, 15.0, and 19.9 Mg ha^{? 1}. The DMC contained 5.9, 2.6, and 6.7 g kg^{? 1} of total N, P, and K, respectively; thus DMC added 29 to 116 kg N ha^{? 1}. In 2004, AN was applied at rates of 112 and 224 kg N ha^{? 1} and DMC was applied at 28 and 57 Mg ha^{? 1}; thus, DMC added 168 to 335 kg N ha^{? 1}. In another 2004 test, biosolids, a biosolids/municipal yard waste compost mixture (BYWC), and AN were compared. The biosolids contained 31, 18, and 2.9 g kg^{? 1} total N, P, and K, respectively. The BYWC mixture contained 8.8, 6.1, and 3.4 g kg^{? 1} of total N, P, and K, respectively. Biosolids were applied at 10 Mg ha^{? 1} (310 kg N ha^{? 1}), BYWC was applied at 58 Mg ha^{? 1} (510 kg N ha^{? 1}), and AN up to 224 kg N ha^{? 1}. None of the soil treatments increased soybean grain yield or forage yield although AN slightly increased forage N concentration in 2003.     

Liming and Copper Fertilization in Dry Bean Production on an Oxisol in No-tillage System

ABSTRACT

A field study was conducted with the objective of determining response of dry bean (Phaseolus vulgaris L.) to liming and copper (Cu) fertilization applied to an Oxisol. The lime rates used were 0, 12, and 24 Mg ha^?1 and Cu rates were 0, 2.5, 5, 10, 20, and 40 kg Cu ha^?1. Liming significantly increased common bean grain yield. Liming also significantly influenced soil chemical properties in the top (0–10 cm) as well as in the sub (10–20 cm) soil layer in favor of higher bean yield. Application of Cu did not influence yield of bean significantly. Average soil chemical properties across two soil layers (0–10 and 10–20 cm) for maximum bean yield were pH 6.4, calcium (Ca), 4.2 cmol_c kg^?1, magnesium (Mg) 1.0 cmol_c kg^?1, H+Al 3.2 cmol_c kg^?1, acidity saturation 40.4%, cation exchange capacity (CEC) 8.9 cmol_c kg^?1, base saturation 63.1%, Ca saturation 45.7%, Mg saturation 18.0%, and Potassium (K) saturation 2.9.     

Forage quality and yield increments of intensive managed grassland in response to combined sulphur-nitrogen fertilization Dedicated to Prof. em.Dr. Alois Kornher on his 75th birthday.

Abstract

A three-year experiment was carried out at three different sites in northern Germany to investigate the effects of combined sulphur (S, up to 50 kg S ha^?1 year^?1) and nitrogen (N, up to 300 kg N ha^?1 year^?1) fertilization on dry matter (DM) yield and forage quality. There was an interaction effect of site, year, S and N fertilization. The greatest DM yield increment relative to yield at the start of the experiment (1997) with no S and N applied was 10.2 t DM ha^?1 at Ostenfeld (arable grassland). Cattle slurry when applied to provide 50 kg N ha^?1 and 10 kg S ha^?1 did not noticeably increase yield. The S content in forage decreased significantly over the years without S fertilization. At 300 kg N ha^?1 and 0 kg S ha^?1, crude protein (CP) contents achieved 173 g kg^?1 DM and were diluted due to higher DM yields with S fertilization. The true protein content (TP% of CP) differed significantly at 300 kg N ha^?1. TP achieved 93% with 50 and 87% with 0 kg S ha^?1 year^?1, respectively. In conclusion, with N fertilizer intensities in the range of 300 kg N ha^?1, it is necessary to apply 25 kg S ha^?1 to improve forage yield and quality. On the other hand, with N fertilization levels below 300 kg N ha^?1, S fertilization could be omitted.     

Effect of zeolite and saline water application on saturated hydraulic conductivity and infiltration in different soil textures

The effects of zeolite application (0, 4, 8 and16 g kg^?1) and saline water (0.5, 1.5, 3.0 and 5.0 dS m^?1) on saturated hydraulic conductivity (K _s) and sorptivity (S) in different soils were evaluated under laboratory conditions. Results showed that K _s was increased at salinity levels of 0.5‐1.5 dS m^?1 in clay loam and loam with 8 and 4 g zeolite kg^?1 soil, respectively, and at salinity levels of 3.0–5.0 dS m^?1 with 16 g zeolite kg^?1 soil. K _s was decreased by using low and high salinity levels in sandy loam with application of 8 and 16 g zeolite kg^?1, respectively. In clay loam, salinity levels of 0.5–3.0 dS m^?1 with application of 16 g kg^?1 zeolite and 5.0 dS m^?1 with application of 8 g zeolite kg^?1 soil resulted in the lowest values of S. In loam, all salinity levels with application of 16 g zeolite kg^?1 soil increased S compared with other zeolite application rates. In sandy loam, only a salinity level of 0.5 dS m^?1 with application of 4 g zeolite kg^?1 soil increased S. Other zeolite applications decreased S, whereas increasing the zeolite application to 16 g kg^?1 soil resulted in the lowest value of S.     

Coal Fly Ash and Phospho‐gypsum Mixture as an Amendment to Improve Rice Paddy Soil Fertility

Abstract

Rice is a plant that requires high levels of silica (Si). As a silicate (SiO₂) source to rice, coal fly ash (hereafter, fly ash), which has an alkaline pH and high available silicate and boron (B) contents, was mixed with phosphor‐gypsum (hereafter, gypsum, 50%, wt wt^?1), a by‐product from the production of phosphate fertilizer, to improve the fly ash limitation. Field experiments were carried out to evaluate the effect of the mixture on soil properties and rice (Oryza sativa) productivity in silt loam (SiL) and loamy sand (LS) soils to which 0 (FG 0), 20 (FG 20), 40 (FG 40), and 60 (FG 60) Mg ha^?1 were added. The mixture increased the amount of available silicate and exchangeable calcium (Ca) contents in the soils and the uptake of silicate by rice plant. The mixture did not result in accumulation of heavy metals in soil and an excessive uptake of heavy metals by the rice grain. The available boron content in soil increased with the mixture application levels up to 1.42 mg kg^?1 following the application of 60 Mg ha^?1 but did not show toxicity. The mixture increased significantly rice yield and showed the highest yields following the addition of 30–40 Mg ha^?1 in two soils. It is concluded that the fly ash and gypsum mixture could be a good source of inorganic soil amendments to restore the soil nutrient balance in rice paddy soil.     

Influence of boron fertilization on cauliflower productivity,nutrient uptake and soil nutrient status in an acid Alfisol in Northwestern Himalaya

ABSTRACT

Modern agriculture over the years has resulted in depletion of boron (B) from soil which has been emerged as a serious obstacle for sustainable agriculture. We studied the availability of B in soil and cauliflower (Brassica oleracea var. botrytis L.) productivity under different levels of B fertilization. A field experiment was conducted during 2013–2014 and 2014–2015, at experimental farm of Himachal Pradesh Agricultural University, Palampur on silt-clay loam soil (acid Alfisol) under mid hill wet temperate condition. Different levels of B for the study included 0, 0.75, 1.5, 2.5, 5, 10, 20 and 30 kg B ha^?1 along with recommended dose (RD) of NPK and farmyard manure (FYM, 20 t ha^?1). The application of B influenced biological yield significantly up to 5 kg ha^?1. Highest curd yield in 2013–2014 (11.03 t ha^?1) and 2014–2015 (12.93 t ha^?1) was recorded in 1.5 and 0.75 kg ha^?1 B along with NPK + FYM, respectively. At higher rates of boron i.e. 10, 20 and 30 kg ha^?1, due to toxic effects, a reduction in curd yield was recorded in both years. Maximum mean uptake of N, P and K by leaves and curd was recorded with the application of boron at 1.5 kg ha^?1, whereas mean B uptake was highest when boron was applied at 2.5 kg ha^?1. The highest mean value (1.79 mg kg^?1) of soil available boron was recorded with 30 kg B ha^?1. Application of boron at 2.4 kg ha^?1 was worked out as optimum dose for cauliflower.     

Genotypic Differences in Dry Bean Yield and Yield Components as Influenced by Nitrogen Fertilization and Rhizobia

Dry bean (Phaseolus vulgaris L.) is an important legume worldwide and nitrogen (N) is most yield limiting nutrients. A field experiment was conducted for two consecutive years to evaluate response of 15 dry bean genotypes to nitrogen and rhizobial inoculation. The N and rhizobia treatments were (i) control (0 kg N ha^?1), (ii) seed inoculation with rhizobia strains, (iii) seed inoculation with rhizobia strains + 50 kg N ha^?1, and (iv) 120 kg N ha^?1. Straw yield, grain yield, and yield components were significantly influenced by N and rhizobial treatments. Grain yield, straw yield, number of pods m^?2, and grain harvest index were significantly influenced by year, nitrogen + rhizobium, and genotype treatments. Year × Nitrogen + rhizobium × genotype interactions were also significant for these traits. Hence, these traits varied among genotypes with the variation in year and nitrogen + rhizobium treatments. Inoculation with rhizobium alone did not produce maximum yield and fertilizer N is required in combination with inoculation. Based on grain yield efficiency index, genotypes were classified as efficient, moderately efficient, and inefficient in nitrogen use efficiency (NUE). NUE defined as grain produced per unit N applied decreased with increasing N rate. Overall, NUE was 23.17 kg grain yield kg^?1 N applied at 50 kg N ha^?1 and 13.33 kg grain per kg N applied at 120 kg N ha^?1.     

Spring camelina N rate: balancing agronomics and environmental risk in United States Corn Belt

Camelina (Camelina sativa (L.) Crantz) seed oil has desirable properties for producing advanced biofuels and as a healthy cooking oil. It has been grown for centuries, but basic recommendations for nitrogen (N) fertilizer requirements are still needed to support widespread industrial cultivation across North America. A replicated N-response plot-scale study was conducted on a northern Mollisol soil for two growing seasons to 1) determine seed and oil yield, seed oil content, and vegetative response; 2) determine indices of N use efficiency; and 3) measure post-harvest residual inorganic soil N as an index of environmental risk. Seed and oil yield response to N fertilization was described with a quadratic function, which predicted maximum seed yield (1450 kg ha^?1) and oil yield (580 kg ha^?1) at about 130 kg N ha^?1. However, seed and oil yield did not differ significantly among N-rates above 34 kg N ha^?1. Seed oil content averaged 400 g kg^?1 among all N rates. Agronomic efficiency declined above 34 kg N ha^?1, which coincided with an increase of post-harvest soil nitrate-N plus ammonium-N (residual N). Considering N use efficiency, simple cost analysis, and risk associated with residual N, a rate of 34 kg N ha^?1 is recommended.     

WHEAT RESPONSE TO FARM YARD MANURE AND NITROGEN FERTILIZATION UNDER MOISTURE STRESS CONDITIONS

Information on the combined use of organic and inorganic fertilizers on wheat (Triticum aestivum L.) productivity is lacking under moisture stress conditions of Northwest Pakistan. The present experiment was designed to ascertain the combined effect of organic and inorganic fertilizer management on rainfed wheat. Four levels of farm yard manure, FYM, (0, 10, 20, and 30 Mg FYM ha^?1) and nitrogen (0, 30, 60, 90, and 120 kg N ha^?1) were used. The experiment was conducted at the Agriculture Research Farm of NWFP Agricultural University Peshawar, Pakistan during crop season of 2003–04. The experiment was laid out in randomized complete block design with four replications. Plant height, productive tillers m^?2, grains spike^?1, grain yield, straw yield, and harvest index were significantly higher in plots which received 30 Mg FYM ha^?1. In the case of nitrogen (N) no distinctive differences between the effect of 90 and 120 kg ha^?1 was observed for most of the parameters. Nitrogen application at 90 kg ha^?1 had significantly higher; plant height, grains spike^?1, grain yield, straw yield, and harvest index as compared with the lower levels, i.e., 0, 30, and 60 kg N ha^?1 but were at par with 120 N kg ha^?1. Significantly higher numbers of productive tillers m^?2, grains spike^?1, grain yield, straw yield and harvest index were recorded with application of 30 Mg FYM ha^?1 + 90 kg N ha^?1. The present study suggested that application of 30 Mg FYM ha^?1 + 90 kg N ha^?1 are promising levels for higher production of wheat under moisture stress conditions. Further research work is needed to ascertain the effect of N above 90 kg ha^?1 under different moisture regimes.     

Response of Chickpea Cultivars to Application of Boron in Boron‐Deficient Calcareous Soils

Abstract

This study was conducted to investigate the effects of four boron (B) doses (control, 0 kg B ha^?1; B₁, 1 kg B ha^?1; B₂, 3 kg B ha^?1; and B₃, 6 kg B ha^?1) in soils deficient in available B (0.19 mg B kg^?1) and lime (CaCO₃) content (20.7%) on yield and some yield components of five chickpea (Cicer arietinum L.) genotypes, namely Akçin‐91, Population, Gökçe, ?zmir‐92, and Menemen‐92 in central Anatolian Turkey in the 2002 and 2003 growing seasons. Plant height, pods per plant, grain yield, protein content, protein yield, thousand seed weight, and leaf B concentration were measured. Grain yields in all genotypes (except for Gökçe) were significantly increased by 1 kg ha^?1 B application. Application of 1 kg ha^?1 B increased the yield by an average of 5%. Genotypes studied showed significant variations with respect to their responses to additional B. Akçin‐91 gave the highest grain yield (1704.8 kg ha^?1) at 3 kg B ha^?1, whereas Population, ?zmir‐92, and Menemen‐92 yielded best (1468.2 kg ha^?1, 1483.0 kg ha^?1, and 1484.7 kg ha^?1, respectively) at 1 kg B ha^?1. Interestingly, Gökçe reached to the highest level of grain yield (1827.1 kg ha^?1) at the control. Gökçe was a B deficiency B tolerance genotype. The other genotypes appeared to have high sensitivity to B deficiency. This study showed that B deficiency could result in significant yield losses in chickpea under the experimental conditions tested. Thus, B contents of soils for the cultivation of chickpea should be analyzed in advance to avoid yield losses.     

Developing nitrogen management strategies under drip fertigation for wheat and maize production in the North China Plain based on a 3‐year field experiment

The intensive winter wheat (Triticum aestivum L.)–summer maize (Zea mays L.) cropping systems in the North China Plain (NCP) rely on the heavy use of mineral nitrogen (N) fertilizers. As the fertigated area of wheat and maize in the NCP has grown rapidly during recent years, developing N management strategies is required for sustainable wheat and maize production. Field experiments were conducted in Hebei Province during three consecutive growth seasons in 2012–2015 to assess the influence of different N fertigation rates on N uptake, yield, and nitrogen use efficiency [NUE: recovery efficiency (RE_N) and agronomic efficiency (AE_N)]. Five levels of N application, 0 (FN₀), 40 (FN_40%), 70 (FN_70%), 100 (FN_100%), and 130% (FN_130%) of the farmer practice rate (FP: 250 kg N ha^?1 and 205.5 kg N ha^?1 for wheat and maize, respectively), corresponding to 0, 182.2, 318.9, 455.5, and 592.2 kg N ha^?1 y^?1, respectively, were tested. Nitrogen in the form of urea was dissolved in irrigation water and split into six and four applications for wheat and maize, respectively. In addition, the treatment “drip irrigation + 100% N conventional broadcasting” (DN_100%) was also conducted. All treatments were arranged in a randomized complete block design with three replications. The results revealed the significant influence of both N fertigation rate and N application method on grain yield and NUE. Compared to DN_100%, FN_100% significantly increased the 3‐year averaged N recovery efficiency (RE_N) by 0.09 kg kg^?1 and 0.04 kg kg^?1, and the 3‐year averaged N agronomic efficiency (AE_N) by 2.43 kg kg^?1 and 1.62 kg kg^?1 for wheat and maize, respectively. Among N fertigation rates, there was no significant increase in grain yield in response to N applied at a greater rate than 70% of FP due to excess N accumulation in vegetative tissues. Compared to FN_70%, FN_100%, and FN_130%, FN_40% increased the RE_N by 0.17–0.57 kg kg^?1 and 0.03–0.34 kg kg^?1and the AE_N by 4.60–27.56 kg kg^?1 and 2.40–10.62 kg kg^?1 for wheat and maize, respectively. Based on a linear‐response relationship between the N fertigation rate and grain yield over three rotational periods it can be concluded that recommended N rates under drip fertigation with optimum split applications can be reduced to 46% (114.6 kg N ha^?1) and 58% (116.6 kg N ha^?1) of FP for wheat and maize, respectively, without negatively affecting grain yield, thereby increasing NUE.     

Increase in the fracture toughness and bond energy of clay by a root exudate

Root exudates help drive the formation of the rhizosphere by binding soil particles, but the underlying physical mechanisms have not been quantified. This was addressed by measuring the impact of a major component of root exudates, polygalacturonic acid (PGA), on the interparticle bond energy and fracture toughness of clay. Pure kaolinite was mixed with 0, 1.2, 2.4, 4.9 or 12.2 g PGA kg^?1 to form test specimens. Half of the specimens were washed repeatedly to remove unbound PGA and evaluate the persistence of the effects, similar to weathering in natural soils. Fracture toughness, K_IC, increased exponentially with added PGA, with washing increasing this trend. In unwashed specimens K_IC ranged from 54.3 ± 2.5 kPa m^?1/2 for 0 g PGA kg^?1 to 86.9 ± 4.7 kPa m^?1/2 for 12.2 g PGA kg^?1. Washing increased K_IC to 61.3 ± 1.2 kPa m^?1/2 for 0 g PGA kg^?1 and 132.1 ± 4.9 kPa m^?1/2 for 12.2 g PGA kg^?1. The apparent bond energy, γ, of the fracture surface increased from 5.9 ± 0.6 J m^?2 for 0 g kg^?1 to 12.0 ± 1.1 J m^?2 for 12.2 g kg^?1 PGA in the unwashed specimens. The washed specimens had γ of 13.0 ± 1.9 J m^?2 for 0 g kg^?1 and 21.3 ± 2.6 J m^?2 for 12.2 g PGA kg^?1. Thus PGA, a major component of root exudates, has a large impact on the fracture toughness and bond energy of clay, and is likely to be a major determinant in the formation of the rhizosphere. This quantification of the thermodynamics of fracture will be useful for modelling rhizosphere formation and stability.     

Boron fertilization of Mediterranean aridisols improves lucerne (Medicago sativa L.) yields and quality

Abstract

Lucerne (Medicago sativa L.) is grown as a forage crop on many livestock farms. In calcareous soils in eastern Turkey, lucerne production requires boron (B) addition as the soils are naturally B deficient. Field experiments with four B-application rates (0, 1, 3, and 9 kg ha^?1 B) were conducted in 2005 and 2006 to determine the optimum economic B rate (OEBR), critical soil test and tissue B values for dry matter (DM) production for lucerne grown on B-deficient calcareous aridisols in eastern Turkey. Boron application increased yield at each site in both years of production. The OEBR and critical soil and tissue B content were not impacted by location. Averaged over the two years and three locations, the OEBR was 6.8 kg B ha^?1 with an average DM yield of 12.0 Mg ha^?1. The average soil B content at the OEBR was 0.89 mg kg^?1 while leaf and shoot tissue B content amounted to 51.8 and 35.5 mg kg^?1, respectively. Boron application decreased tissue calcium (Ca), zinc (Zn), and copper (Cu), and increased tissue nitrogen (N), phosphorus (P), potassium (K), magnesium (Mg), iron (Fe), and manganese (Mn). Tissue and soil B increased without impacting yield at B levels up to 9 kg ha^?1. We conclude that 7 kg ha^?1 B is sufficient to elevate soil test B levels from 0.11 to 0.89 mg kg^?1 and overcome B deficiency at each of the sites in the study. Similar studies with different soils and initial soil test B levels are needed to conclude if these critical soil and tissue values can be applied across the region.     

Nutritional reference values for Opuntia ficus‐indica determined by means of the boundary‐line approach

Optimum concentrations and/or sufficiency ranges of nutrients are useful for a correct diagnosis and improvement of nutrient status of cultivated plants. To develop boundary‐line approach (BLA) standards for Opuntia ficus‐indica L., a database of N, P, K, Ca, and Mg concentrations in 1‐year‐old cladodes and cladodes fresh‐matter yield was used. The BLA optimum concentrations (associated with estimated maximum yield) for O. ficus‐indica were: N = 13.1 g kg^–1, P = 3.2 g kg^–1, K = 44.4 g kg^–1, Ca = 38.1 g kg^–1, and Mg = 17.3 g kg^–1. The BLA sufficiency ranges at 95% yield were 8.4–20.3 g kg^–1 for N, 2.4–4.2 g kg^–1 for P, 38.2–50.8 g kg^–1 K, 31.8–45.2 g kg^–1 for Ca, and 14.3–20.9 g kg^–1 for Mg. The BLA standards are comparable to those obtained in a previous study using compositional‐nutrient‐diagnosis (CND) approach.