Cellulose-based porous adsorbents with high capacity for methylene blue adsorption from aqueous solutions

A novel cellulose-based porous adsorbent with high adsorption capacity for methylene blue (MB) was prepared by free radical polymerization methods. The obtained polymer grafting rate and dye removal efficiency are as high as 338.64 % and 97.74 %, respectively, when the dosage of monomer is 4.5 g, the polymerization condition is 3 h at 70 °C. The cellulose-based adsorbent showed high mechanical properties and good flexibility. The Langmuir isotherm model revealed that the maximum theoretical adsorption capacity of this material for methylene blue was 1734.816 mg g-1 at pH 9.0 at 313 K, which is higher than the values observed for other adsorbents. Scanning electron microscopy (SEM) showed that the cellulose-based adsorbent exhibits a typical well-defined porous and interconnected three-dimensional framework structure, which is benefits to dye adsorption. The adsorption kinetics (pseudo first-order, pseudo-second-order, and intraparticle diffusion models) was also studied, and the pseudo-second-order model fitted MB adsorption better than the pseudo-first-order and intraparticle diffusion models at different initial dye concentrations (500-3000 mg l ^-1). The novel polyacrylic acid-grafted quaternized cellulose (PAA-g-QC) adsorbent is thus potentially useful for the treatment of dye-contaminated wastewater.     

Highly flame retardancy of cotton fabrics with a novel phosphorus/nitrogen/silicon flame-retardant treating system

A novel reactive flame retardant (FR) containing phosphorus, nitrogen, and silicon was synthesized successfully, and its chemical structure was fully characterized by Fourier transform infrared spectrometry and nuclear magnetic resonance spectrometry (¹H-NMR and ³¹P-NMR). Then it was used to impart flame resistance to cotton fabrics. Vertical flammability and limiting oxygen index test were used to evaluate the flame retardancy of the cotton fabrics treated with FR. When the cotton treated with 150 g/l FR and 50 g/l sodium hypophosphite, the finished cotton can pass the vertical flammability test. Thermogravimetry (TG) was used to evaluate thermal behavior of FR and cotton fabrics. TG results demonstrated that the FR has good thermostability and char-forming ability. After treatment with FR, the thermal stability of the cotton fabrics was clearly improved, indicating that the FR can protect cotton fabric from fire to a certain degree. Furthermore, attenuated total reflection Fourier transform infrared spectroscopy was utilized to characterize the chemical structure of FR treated cotton fabrics. Finally, the surface morphology in different regions of the treated cotton was observed using scanning electron microscopy.     

A flexible nanocomposite membrane based on traditional cotton fabric to enhance performance of microbial fuel cell

A flexible and stretchable three-dimensional nanocomposite membrane based on traditional cotton fabric is a promising alternative for proton exchange membrane because it has the capability of transferring protons, is inexpensive, and also have higher current density compared to Nafion membranes in microbial fuel cells. The obtained results showed that the highest power and current of PVAc-g-PVDF-coated cotton fabric were 400±10 mW/m² and 92 mA/m², respectively. However, maximum generated power and current for Nafion-117 were 300±10 mW/m² and 60 mA/m², respectively. The highest proton conductivity of PVAc-g-PVDF-coated cotton fabric was (1.5±0.2)×10^-2 S/cm at 25 °C and lowest glucose permeability was (12±1)×10^-6 cm²/s after Mg²⁺ ions adsorption. Furthermore, the highest COD removal (85±3 %) and CE (11.2 %) were obtained from PVAc-g-PVDF-coated cotton fabric. The coated cotton fabric can provide a novel route for low-cost production of high-performance flexible proton exchange materials from the natural fabrics.     

<Emphasis Type="Italic">In situ</Emphasis> deposition of silver nanoparticles on the cotton fabrics

A novel method was developed to prepare the antibacterial cotton fabrics through in situ deposition of silver nanoparticles on the cotton fabrics by the reduction of Ag⁺ without any reductant and dispersant. The data showed that by immersing the cotton fabrics in 160 mM AgNO₃ solution at 90 °C, the amount of silver nanoparticles was increased from 0.6890 to 1.3561 mg per gram of fabrics with the increase of reaction time from 10 to 50 min. The obtained cotton fabrics showed excellent antibacterial activity and laundering durability, in which the bacterial reduction was still 98.5 and 94.3 % to Escherichia coli and Staphylococcus aureus, respectively, even after the fabrics were washed for 20 cycles. Thus, this facile in stitu reduction method without any other reducers or stabilizers may bring a promising and green strategy to produce functional cotton fabrics.     

Development of Maghemite Glass Fibre Nanocomposite for Adsorptive Removal of Methylene Blue

Maghemite glass fibre nanocomposite with excellent magnetic and adsorption properties was successfully developed from nontoxic and eco-friendly reagents by thermal decomposition approach. The developed nanocomposite was utilized in adsorption of methylene blue which follows Freundlich adsorption isotherm. The excellent value of adsorption capacity (51.31 mg g^-1) as compared to other adsorbents recommends its potential role for adsorption phenomenon in multiple applications. The developed nanocomposite can be recycled and reused easily. Surface and other functional characteristics of developed nanocomposite were determined through scanning electron microscopy, X-ray diffraction, raman spectroscopy, energy dispersive X-ray spectroscopy and vibrating sample magnetometer. The obtained results revealed that maghemite glass nanocomposite is a potential tool that can be utilized in waste water treatments.     

Flame retardant properties of triazine phosphonates derivative with cotton fabric

The flame retardant behavior of cotton fabric treated with phosphorus-nitrogen containing triazine compound was evaluated. It was found that cyanuric chloride (2,4,6-trichloro-1,3,5-triazine) is an excellent starting material for the preparation of phosphonate flame retardants that interact well with cotton to improve flame resistance (FR) performance. Tetraethyl 6-chloro-1,3,5-triazine-2,4-diyldiphosphonate (TECTDP) has been prepared by a simple one-step reaction in high yield (98.0 %). Cotton fabrics treated with TECTDP result in covalent bond formation between TECTDP and hydroxyl groups in cotton fabrics. This FR system provides an efficient flame retardant for cotton textiles at low cost to meet government mandates. In this study, the FR material was synthesized and characterized by ¹H and ¹³C nuclear magnetic resonance (NMR), and LC-MS spectroscopy. The chemical structure of cotton twill fabric treated with TECTDP by pad-dry-cure method was analyzed by FT-MIR and SEM. Furthermore, the thermal and flammability properties were evaluated by thermogravimetric analysis (TGA), limiting oxygen index (LOI, ASTM D-2863-09), and a vertical flame test (ASTM D-6413-08).     

Eco-friendly and Durable Antibacterial Cotton Fabrics Prepared with Polysulfopropylbetaine

A novel antibacterial agent polysulfopropylbetaine (PSPB) bearing carboxyl groups was synthesized and its application on cotton fabric to provide durable antibacterial property was also presented. The successful synthesis of PSPB and its immobilization onto the cotton fabric surface were verified by a series of tests including FTIR, ¹H NMR, XPS and SEM. Viable cell counting method was employed to investigate antibacterial properties of the finished cotton fabrics. It was found that the cotton fabrics treated with PSPB were endowed with desirable antibacterial activity against both gram-negative bacteria Esherichia coli (E.coli, AATCC 6538) and gram-positive bacteria Staphylococcus aureus (S.aureus, AATCC 25922), with the bacterisotatic rates of 99.69 % and 99.95 %, respectively. Notably, the bacterial reduction rates still maintained over 90 % against both bacteria even after 50 consecutive laundering cycles. Moreover, tests concerning the hydrophilicity, air permeability, water vapor transmission, mechanical properties as well as thermal properties were carried out systematically. The experimental results indicated the hydrophilic performance, air permeability and moisture penetrability of the cotton fabrics finished with PSPB were improved greatly in spite of a slight reduction in thermal performance and little obvious influence on mechanical performance. The antibacterial cotton fabric has the potential to be applied in sportswear, underwear, household textiles, medical fields and much more.     

Synthesis of HBP-HTC and its application to cotton fabric as an antimicrobial auxiliary

A quaternary ammonium compound, 2-hydroxypropyltrimethylammonium chloride amino-terminated hyper-branched polymer (HBP-HTC), was synthesized from an amino-terminated hyperbranched polymer (HBP-NH₂) and 2,3-epoxypropyltrimethylammonium chloride (EPTAC) as a grafting agent in aqueous solution. Its molecular weight and possible structure were characterized by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (¹H-NMR). The cotton fabric was treated with 2 g/l HBP-HTC aqueous solution for 30 min at room temperature to provide the cotton fabric with antimicrobial properties. The antimicrobial activities of the HBP-HTC aqueous solutions and the HBP-HTC treated cotton fabrics were evaluated quantitatively. The results indicated that the HBP-HTC treated cotton fabric showed 99.92 % reduction of bacteria S. aureus and 99.66 % reduction of bacteria E. coli, respectively. The antimicrobial activities of the HBP-HTC treated cotton fabrics were maintained at over 99.00 % reduction level even after being exposed to 20 consecutive home laundering conditions.     

Synthesis of poly(hydroxamic acid) ligand from polymer grafted khaya cellulose for transition metals extraction

A cellulose-graft-poly(methyl acrylate) was synthesized by free radical initiating process and the ester functional groups were converted into the hydroxamic acid ligand. The intermediate and final products are characterized by FT-IR, FE-SEM, HR-TEM and XPS technique. The pH of the solution acts as a key factor in achieving optical color signals of metalcomplexation. The reflectance spectra of the [Cu-ligand]n+ complex was found to be a highest absorbance at 99.8 % at pH 6 and it was increased upon increasing of Cu²⁺ ion concentrations and a broad peak at 700 nm was observed which indicated the charge transfer (π-π transition) metals-Cu complex. The adsorption capacity of copper was found to be superior (336 mg g^?1) rather than other transition metals such as Fe³⁺, Co³⁺, Cr³⁺, Ni²⁺, Mn²⁺ and Zn²⁺ were 310, 295, 288, 250, 248 and 225 mg g^-1, respectively at pH 6. The experimental data of all metal ions fitted significantly with the pseudo-second-order rate equation. The transition metal ions sorption onto ligand were well fitted with the Langmuir isotherm model (R²>0.99), which suggested that the cellulose-based adsorbent known as poly(hydroxamic acid) ligand surface is homogenous and monolayer. The reusability of the poly(hydroxamic acid) ligand was checked by the sorption/desorption process up to ten cycles without any significant loss in its original sensing and removal performances.     

Synthesis and flame-retardancy of UV-curable methacryloyloxy ethyl phosphates

Tris[2-methacryloyloxy ethyl] phosphate (TMEP), bis(2-methacryloyloxy) ethyl phosphate (DMEP), and 2-(methacryloyloxy ethyl) phosphate (MMEP) were synthesized from phosphorous oxychloride and 2-hydroxyethyl methacrylate, which can be used as flame retardant monomers for UV-curable coating systems. The characterization of the synthesized monomers was carried out by ¹H-NMR, FT-IR, thermo-gravimetric analysis, and the limited oxygen index (LOI) test. The thermal behavior of the cured films depended on phosphorous content and the methacrylate groups in the monomer. The UVcured films from TMEP, DMEP, and MMEP monomers showed LOIS of 28.5, 30.3, and 35.1 respectively. Also, LOI up to 25.4 was obtained for the UV-coated cotton fabrics, which presumably occur through a condensed phase mechanism as verified in the increased residue number. The higher performance of UV-coated cotton fabrics compared to PET was attributed to the facile dehydration and crosslinking of the cellulosic materials.     

Removal of methylene blue by amidoxime polyacrylonitrile-grafted cotton fabrics: Kinetic,equilibrium, and simulation studies

In this study, an amidoxime-grafted cotton fabric ion exchanger was developed for methylene blue (MB) removal from wastewater. The ability of the amidoxime-grafted cotton fabrics to remove MB ions from an aqueous solution was investigated in equilibrium, kinetics and thermodynamics studies. Equilibrium data agreed well with the Freundlich and Langmuir isotherm models. The result indicated that, based on the Langmuir coefficient, the maximum capacity (monolayer saturation at equilibrium) of the amidoxime-grafted cotton fabric was 22.27 mg/g. The kinetic data were found to follow the pseudo-second-order model, and intra-particle diffusion is the sole rate-controlling factor. Negative values of ΔG ⁰, ΔH ⁰, and ΔS ⁰ revealed the spontaneous, exothermic and entropy-driven nature of the process.     

Flexural stiffness of core spun cotton/spandex weft knitted structures under relaxation and machine washing treatments

In this research work, behavior of flexural stiffness of core spun cotton spandex single jersey, 1x1 rib and interlock fabrics was studied under relaxation and machine washing treatments. Results are compared with similar fabrics made from 100 % cotton. Fabric weight density increased with the progression of treatments and it is proportionate to the fabric tightness factor (stitch length^?1). Even though both types of fabrics had same machine set stitch lengths, cotton/spandex fabrics have shown the higher fabric weight densities than that of 100 % cotton fabrics. Although 1x1 rib and single jersey fabrics knitted with the same machine set stitch lengths, rib fabrics have given higher fabric weight densities than single jersey fabrics. Among the three knitted structures, interlock fabrics with higher machine set stitch lengths gave the higher fabric weights. Fabric stiffness and flexural rigidity have given higher values under the progression of treatments and it was found that higher values of stiffness have given by cotton/spandex knitted fabrics compared to their cotton fabrics. Fabric stiffness and flexural rigidity in wale direction were higher than that in course direction, but it is only observed in single jersey fabrics. However, 1x1 rib and interlock fabrics have shown an opposite behavior. It was also observed a positive correlation between TF (i.e.: stitch length^?1) and bending length/flexural rigidity in both fabric types. Lower flexural rigidities reported with single jersey structures and highest values gave with interlock structures of cotton/spandex and cotton fabrics.     

Applicability of Industrial Sisal Fiber Waste Derived Activated Carbon for the Adsorption of Volatile Organic Compounds (VOCs)

Agricultural waste produced by the industry is a huge threat for the global environment. Utilization of agricultural waste is necessary and there is an urgent need to develop new techniques to solve this important problem. The main objective of this research was to evaluate the applicability of the activated carbon (AC) derived from industrial sisal fiber waste as passive samplers in monitoring toluene by comparing them to industry standard wafer and granular activated carbon (GAC). Carbonization time and ball milling effect on sisal fiber derived AC sample adsorption properties were investigated. Toluene adsorption isotherms were used to predict toluene adsorption capacities. Surface characteristics including surface area and pore volume were used to determine the relationships between them and adsorption capacity. Even though prepared AC samples have mesoporous structure, commercial samples have microporous structure. Surface area from 1245 m²/g to 1297 m²/g and toluene adsorption capacity from 21.4 % to 26.6 % was improved by increasing carbonization time from 1 h to 3 h at 650 °C carbonization temperature and 94.4 ml/min flow rate. Conversely, ball milling technique had negative effect by decreasing the surface area (674 m²/g) and the adsorption capacity of toluene (12.27 %). It is concluded that industrial sisal fiber waste have great potential as a precursor of AC for application in passive monitoring against toluene, particularly the produced mesoporous AC with 3 h carbonization time performs higher adsorption capacity (26.6 %) than commercially available microporous passive sampler (24.1 %) and GAC (22.8 %).     

Electrical Resistivity of Plasma Treated Viscose and Cotton Fabrics with Incorporated Metal Ions

Cellulose fabrics (viscose and cotton) were treated with atmospheric pressure dielectric barrier discharge (DBD) in air. After DBD treatment, samples were characterized and volume electrical resistance was measured under different relative humidity conditions (φ=40-55 %). Results have shown that DBD treatment increases wettability and polar surface functional groups content, which consequently causes a decrease of volume electrical resistivity of cellulose fabrics in measured relative humidity range (φ=40-55 %). Metal ions (silver, copper, and zinc) were incorporated in untreated and plasma treated samples through sorption from aqueous solutions and incorporation of metal ions into plasma treated cellulose samples decreased electrical resistivity even further. Resistivity of cotton and viscose fabrics with incorporated metal ions followed the order Zn²⁺ > Cu²⁺ > Ag⁺. The most pronounced decrease, for entire order of a magnitude, was obtained by modification of cotton fabric with DBD and silver ions, where value of resistivity dropped from GΩ to a several dozens of MΩ.     

Development of biofunctional textiles by the application of resveratrol to cotton, bamboo, and silk

The goal of this work was to create a new generation of greener fabrics made of natural materials. For that, resveratrol (Res), obtained from Polygonum cuspidatum extract and known to have antibacterial, antifungal, and anti-inflammatory activity, was applied by an exhaustion method to cotton, bamboo, and silk knit fabrics. The fabrics adsorption behavior was tested and the amount of Res adsorbed was determined by its decrease on the immersion solutions with time and measured by spectrophotometry at 350 nm. The maximum adsorption capacity was observed for silk and it was independent of pH conditions used (50.5 % at pH=7 and 58.3 % at pH=5 of the initial Res concentration). At acidic pH conditions, cotton adsorbed 51.2 % of Res and Bamboo adsorbed only 28.1 % in 15 min. However, neither cotton nor bamboo adsorbed Res at pH=7. The release behavior was also analyzed and the highest Res release was observed for cotton in alkaline sweat and urine mimic solutions. The lowest release was achieved by cotton in water (1.0 ng/ml). Moreover, no relation was found between the amounts of Res adsorbed or released and cell viability. In conclusion, this work shows that it is possible to obtain cotton, bamboo, and silk functionalized with resveratrol. The incorporating process here described is simple and silk-Res can be presented as a good combination.     

Evaluation of bamboo charcoal/stainless steel/TPU composite woven fabrics

Composite woven fabric satisfies what people require. Bamboo charcoal (BC) has been identified as a multifunctional material that has far-infrared ray, anions, deodorization and etc. BC fibers and yarns were made of bamboo charcoal powders and have further become a pervasive materials used in textile industry. In this study, cotton yarns, stainless steel/cotton (SS/C) complex yarn, bamboo charcoal/cotton (BC/C) complex yarns were woven into the plain, twill and Dobby composite woven fabrics. The warp yarn was composed of cotton yarns, and the weft yarn was made up of BC/C and SS/C complex yarns with a picking ratio of 1:1 and 3:1. Thermoplastic polyurethanes (TPU) film was then attached to the composite woven fabrics, forming the BC/SS/TPU composite woven fabrics. Tests of electromagnetic shielding effectiveness (EMSE), far-infrared emissivity, anions, water resistance, and water vapor permeability measured the single-layer, two-layer and four-layer composite woven fabrics, obtaining a far-infrared emissivity of 0.95 by 39.8 counts per minute, an anion count of 149 amount/cc, an EMSE of −11.87 dB under frequency of 900 MHz, a surface resistivity of 8×10⁻⁶ Ω/square, a water resistance of −8219 mmH₂O, and water vapor permeability of 989 g/m²·h and 319 g/m²·24 h in accordance with JIS L 1099 A1 and ASTM E96 BW.     

Formaldehyde free cross-linking agents based on maleic anhydride copolymers

Low molecular weight copolymers of maleic anhydride and vinyl acetate were prepared to develop formaldehyde free cross-linking agents. Since lower molecular weight is favorable for efficient penetration of the finishing agent into the cotton fibers in the padding process, the concentration of the initiator, chain transfer agent and the monomer ratios were varied to obtain copolymers of low molecular weights. The prepared polymers were characterized by GPC,¹H-NMR, FTIR, DSC and TGA. Copolymers of molecular weights of 2 000 to 10 000 were obtained and it was found that the most efficient method of controlling the molecular weight was by varying the monomer ratios. Poly(maleic anhydride-co-vinyl acetate) did not dissolve in water, but the maleic anhydride residue hydrolyzed within a few minutes to form poly(maleic acid-co-vinyl acetate) and dissolved in water. However, the maleic acid units undergo dehydration to form anhydride groups on heating above 160 °C to some extent even in the absence of catalysts. The possibility of using the copolymers as durable press finishing agent for cotton fabric was investigated. Lower molecular weight poly(maleic anhydride-co-vinyl acetate) copolymers were more efficient in introducing crease resistance, which appears to be due to the more efficient penetration of the crosslinking agent into cotton fabrics. The wrinkle recovery angles of cotton fabrics treated with poly(maleic anhydride-co-vinyl acetate) copolymers were slightly lower than those treated with DMDHEU and were higher when higher curing temperatures or higher concentrations of copolymer were used, and when catalyst, NaH₂PO₂, was added. The strength retention of the poly(maleic anhydride-co-vinyl acetate) treated cotton fabrics was excellent.     

Cutinase treatment of cotton fabrics

Our study proposes an enzymatic scouring method for cotton fabrics using the enzyme cutinase. We established cutinase treatment conditions for cotton fabrics from their relative activity at different pH levels, temperatures, enzyme concentrations, and treatment times. Weight loss, moisture regain, K/S value, tensile strength, and SEM micrographs of cotton fabrics were analyzed. We determined the optimum cutinase treatment conditions to be as follows: pH of 9.0, temperature of 50°C, cutinase concentration of 100 %, and a treatment duration time of 60 min. We discovered that this cutinase treatment hydrolyzed the cuticle of cotton fabrics. The cutinase treatment did not decrease the moisture regain and the K/S value. The optimum concentrations of Triton X-100 and calcium chloride, which were used as auxiliaries for cutinase treatment, were found to be 0.5 % (v/v) and 70 mM, respectively. Some cracks were observed on the surface of the cotton fibers; however, the tensile strength did not decrease.     

Assay of some nutritional and antinutritional factors in different cultivars of winged bean (Psophocarpus tetragonolobus (L.) DC) seeds

Seed of 34 cultivars of winged bean of different origin were evaluated for their nutritional composition and the antinutritional factor, the trypsin inhibitor. The values ranged from 14.1–17.6, 6.12–8.73, 21.94–34.89 and 30.86–39.05% for their fat, fibre, carbohydrate and protein contents, respectively. The protein content in defatted seed meal ranged from 33.43–47.25%, whereas the trypsin inhibitor activity (TIA) registered a wide variation from 63–123 mg g^?1 with seed coat and 51–98 mg g^?1 without seed coat. The strain selection-12 and NBRI selection contained the minimum TIA (63 mg g^?1), while the highest value (123 mg g^?1) was in variety V7, a 2-fold higher activity.     

Preparation of Durable Antibacterial Cellulose with AgCl Nanoparticles

In this study, a facile method was developed to coat AgCl nanoparticles (NPs) onto knitted cotton fabrics. The AgCl NPs were characterized by ultraviolet absorption spectrum, X-ray diffraction (XRD) and dynamic laser light scattering (DLS). The AgCl NPs were coated onto cotton fabrics through a pad-dry-cure process with the assistance of 1,2,3,4- butanetetracarboxylic acid (BTCA). Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), ICP-OES analysis and energy-dispersive X-ray spectroscopy (EDX) confirmed that AgCl NPs were successfully coated onto cotton fabrics. The prepared cotton samples exhibited excellent antimicrobial activity against both Gram-positive S. aureus and Gram-negative K. pneumonia bacteria. Rat skin fibroblast cytotoxicity testing demonstrated the treated cotton fabrics to be non-toxic. The washing durability evaluation showed that the antimicrobial function of cotton fabrics was durable to washing. In addition, the wrinkle resistance of the coated cotton fabrics was improved and there was no obvious change in whiteness.