Vibrational properties of wood plastic plywood

Wood plastic plywood (WPPW), composed of veneer and styrofoam, was manufactured without special adhesives such as urea–formaldehyde or phenol–formaldehyde resins, and its vibrational properties were investigated. WPPW can be produced at 1MPa and 160°C for 9min (three-ply) and 12min (five-ply). The dynamic Youngs modulus reached its highest value when the styrofoam thickness was 30mm. The sound velocity and dynamic Youngs modulus had minimum values at a grain angle of 45°. The results for dynamic Youngs moduli measured by a longitudinal vibration method and an in-plane flexural vibration method were almost the same. Dynamic shear moduli were measured by an in-plane surface wave propagation test and an in-plane flexural vibration method. From the experimental results, the dynamic shear moduli at 0° and 90° by the two methods were relatively close, although the surface wave propagation test results were higher than those from the flexural vibration method. Dynamic shear moduli at a grain angle of 45° measured by the in-plane surface wave propagation test and calculated from theory were relatively close. The surface wave propagation test results were smaller than the results calculated from theory. The shear stress distribution factors were about 1.000–1.189 for WPPW.     

Dynamic properties of three types of wood-based composites

This study used a vibration test method to show that grain angles of face veneer have substantial effects on sound velocities and dynamic Youngs moduli of three types of wood-based composites. The sound velocity at 0° grain angle of face veneer was the highest, and it decreased with increasing grain angle in the range of 0° to 90°. This tendency was similar to that for dynamic Youngs modulus. The relationship between the grain angle of face veneer and the sound velocity of three types of wood-based composites can be expressed in the form of Hankinsons equation or a second-order parabolic equation. This study also showed that the application of orthotropic elasticity theory was valid for the three types of wood-based composites. The relationship between the grain angle of the face veneer and the Youngs modulus of three types of wood-based composites can be expressed in the form of the Jenkin equation, Hankinsons equation, or a second-order parabolic equation. Rule of mixture can also be used to predict the Youngs modulus of wood-based composite from the Youngs moduli of the two elements.Part of this study was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, Japan, March 2003 and the 15th Annual Meeting of Chugoku Shikoku Branch of the Japan Wood Research Society, Higashi-Hiroshima, Japan, September 2003     

Compressive deformation of wood impregnated with low molecular weight phenol formaldehyde (PF) resin II: effects of processing parameters

To obtain high-strength phenol formaldehyde (PF) resin-impregnated compressed wood at low pressing pressure, the effects of resin content, preheating temperature, pressing temperature, and pressing speed on the compressive deformation of oven-dried low molecular weight PF resin-impregnated wood was investigated. With an increase of PF resin content, the Youngs modulus of the cell wall perpendicular to the fiber direction decreases, and collapse-initiating pressure decreases linearly with the Youngs modulus. This indicates that the occurrence of cell wall collapse is strain-dependent. By increasing preheating temperatures, the collapse-initiating pressure increases due to the increment of the Youngs modulus of the cell wall. An increase in pressing temperature results in the thermal softening of the cell wall and causes collapse at a lower pressure. The wood is compressed effectively despite accelerated resin curing. The pressing speed significantly affects the viscoelastic deformation of the cell wall and the wood is well deformed with decreasing pressing speed, although the differences in density and mechanical properties are relatively small after a pressure-holding period of 30min. In all the parameters examined in this study, the Youngs modulus and bending strength increase with increasing density.     

Chemical and physical changes required for producing dimensionally stable wood-based composites

Summary The springback of compressed wood caused by built-up internal stresses results in excessive thickness swelling of wood-based composites when exposed to moisture. Steam pretreatment can cause partial hydrolysis of hemicellulose for both hardwoods and softwoods which markedly increases the compressibility of wood and in turn significantly reduces the build-up of internal stresses in composites during hot pressing. This steam pretreatment process is a very effective method for producing dimensionally stable wood-based composites. Mild steam pretreatments (e.g. 3 to 4 min at 1.55 MPa) cause a significant reduction of the water insoluble xylan content in hardwoods and the amount of xylan, mannan and galactan in softwoods without any apparent changes in the cellulose or lignin content.The authors wish to thank G. Bastien and B. S. Lethbridge for technical assistance. W. Schwald is grateful to the Fonds zur Förderung der wissenschaftlichen Forschung, Vienna, Austria for granting an Erwin-Schrödinger scholarship (Proj. No. J0128C)     

Poisson’s ratios of an oriented strand board

In the assessment of the structural adequacy of oriented strand board (OSB) members by design calculation, the need for the boards Poissons ratios often becomes evident. However, mention of Poissons ratios as a relevant mechanical property is seldom made in wood-based panel test and design standards. The short-term principal Poissons ratios of a typical OSB has been determined from tension tests. Mean values of 0.23 and 0.16 have been obtained for the major and minor Poissons ratios, respectively. The experimentally determined Poissons ratios appear consistent with the values estimated from the panel shear and tension moduli of elasticity. Complementary values of the Poissons ratios in bending have been estimated from the bending moduli of elasticity and tension test results for the panel. Efficiency in the assessment of OSB by design calculation follows from knowledge of Poissons ratios. However, for this benefit to be realised in routine design, the Poissons ratios of structural grade OSB need to be available.     

Dependence of reaction kinetics and physical and mechanical properties on the reaction systems of acetylation II: physical and mechanical properties

Acetylation of wood was carried out in acetic anhydride only, acetic anhydride/xylene 1:1 (v/v), and acetic anhydride/pyridine 4:1 (v/v) solutions. The antishrink efficiency (ASE), hygroscopic properties, vibrational properties, and bending strength were compared among the three reaction solutions. The ASE was a simple function of weight gain (WG); the equilibrium moisture content at a given WG differed among the reaction solutions. Based on this fact and the results of repeated water soaking and oven-drying tests, it was found that the bulking effect was a major factor, and that decreased hygroscopicity contributes only slightly to the dimensional stabilization by acetylation. The difference in equilibrium moisture content among reaction solutions appears more significant in block samples than wood meal, probably due to the fiber-to-fiber bonds in the former. The tendencies for change in the specific Youngs modulus and the loss tangent differed among reaction solutions, whereas in the static bending test the difference was not marked.Part of this report was represented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

Influence of rotatory inertia,shear deformation and support condition on natural frequencies of wooden beams

Summary The degree of influence of rotatory inertia and shear deformation on natural frequency determinations is discussed. It is found that for material such as wood, which has a relatively high ratio of bending modulus to shear modulus, these effects need to be taken into account even for supposedly slender beams. The discussion covers the four most common types of support condition, namely simply supported, free-free, clamped-free and clamped-clamped ends. As a perfectly rigid clamped condition can never be achieved in practice, especially for relatively soft material like wood, consideration is extended to also include partially-clamped beams.Symbols A cross sectional area - E modulus of elasticity in bending - E_c modulus of elasticity in compression perpendicular to the grain - G shear modulus - I second moment of area - K shear shape factor - K_H, K_HO, K_HL translational spring stiffness - K_T, K_TO, K_TL rotational spring stiffness - L span - b breadth - d depth - s clamp length - m mass per unit length - t time - v transverse displacement - x distance along the length of a beam - y transverse displacement with time - total rotation - angular natural frequency - f_T natural frequency of a Timoshenko beam - f_E natural frequency of an Euler beam This work was undertaken with financial support from Canadian Natural Sciences and Engineering Research Council under Special Support for Forestry Grant No. FRP0030800 and Operating Grant No. OGP0004417     

Paraiso (Melia azedarach var. “Gigante”) woodlots: an agroforestry alternative for the small farmer in Paraguay

This paper describes the salient aspects and analyses the potential of the Paraiso Woodlot System, which is becoming popular as an agroforestry alternative to land use in the degraded acid sandy soils of the humid sub-tropical Guayaybi area of Paraguay. The system consists of a combination of paraiso (Melia azedarach var gigante) with other trees, especially Leucaena leucocephala, and annual crops.The fast growth habit, deep root system, addition of large quantities of organic matter through leaf and litter fall, compatibility with agricultural crops, high value of the sawlogs and production of substantial quantities of poles and firewood make paraiso an excellent species for agroforestry combination. Preliminary results of the trials indicate that the woodlots are successful and with increasing efforts of the extension agencies, they are being accepted as a viable alternative to traditional agricultural systems.Besides discussing the potential of these woodlots based on initial results, the paper identifies the constraints of the system and highlights the priority research areas.     

Suitability of acetylated woods for clarinet reed

The density (), dynamic Young's modulus (E), loss tangent (tan_L) in the longitudinal (L) direction, and the dynamic shear modulus (G), loss tangent (tan_S) in the LT or LR (T, tangential; R, radial) plane of woods and cane (Arundo donax L.) in air-dried and wet conditions were measured. The acoustic converting efficiency (ACE), expressed by E/³/tan_L, and the factors of anisotropy, expressed byE/G and tan_S/tan_L, of woods were compared with those of the canes. Low-density coniferous woods had higher ACE values and were of a more anisotropic nature than the cane. These woods seemed appropriate for clarinet reed owing to their homogeneous cellular structure. The stability in vibrational properties and the anticreep properties of the woods were enhanced by the acetylation treatment. Professional clarinet players suggested that acetylated Glehn's spruce and sitka spruce were suitable for clarinet reeds.Part of this report was presented at the 48th annual meeting of the Japan Wood Research Society at Shizuoka, April 1998     

The anisotropic elasticity of the plant cell wall

Summary The plant cell wall is treated as a two phase fibre composite material in which the fibres are dispersed, in an isotropic matrix, in the plane of the cell wall with an angular distribution f(). If f () can be represented by a gaussian it is shown that the elastic stiffness constants of the cell wall can be easily evaluated. The theory is applied to a model of the earlywood of Pinus radiata and the theoretical variation of the longitudinal Young's Modulus with mean fibrilar direction is compared with that determined experimentally.

---

Zusammenfassung Die pflanzliche Zellwand wird im allgemeinen behandelt wie ein im wesentlichen aus zwei Phasen bestehendes Fasermaterial, bei dem die Fasern in einer isotropen Matrixsubstanz gelöst und in der Zellwandebene mit einem Winkel f() verteilt sind. Sofern f() normal verteilt ist, können die elastischen Konstanten der Zellwand verhältnismäßig einfach berechnet werden. Diese Theorie wird auf das Modell von Kiefern-Frühholz (Pinus radiata) angewendet, und die theoretisch ermittelte Änderung des longitudinalen Youngs Moduls mit der mittleren Faserrichtung wird mit experimentell bestimmten Werten verglichen.

     

Shear creep and mechanosorptive behavior of nail-plate-jointed laminated-veneer lumber

The objective of this research was to evaluate the mechanosorptive deflection of shear creep of nail-plate-jointed laminated-veneer lumber. The joint was composed of steel gusset and nails, 40 mm in length and 2.8 mm in diameter (Zn40). The specimens were loaded parallel (PA) and perpendicular (PE) to the grain. Shearing loads applied were 50 and 100kgf, and the load levels were 11% and 22% (PA) and 7% and 14% (PE) of the maximum strength obtained from static testing. The creep test specimens were loaded for 1500h. A few general conclusions could be drawn from this study: The mechanosorptive deflection (_ms) is defined as _ms = _t — (_c + _sh) — _o, where _t, is total deflection, _c is pure creep, _sh is shrinkage-swelling behavior, and _o is the initial deflection. Changes in relative humidity may cause more severe creep deflection than constant humidity, especially during the drying process. The mechanosorptive deflection is greater at the lower load level than that at the higher load level. The mechanosorptive effects seem to be somewhat more resistant in the parallel direction than in the perpendicular direction.     

The tree/crop interface — or simplifying the biological/environmental study of mixed cropping agroforestry systems

A key to understanding the biological potentials and restraints of agroforestry systems, and the environmental responses of plant components within them, is the tree/crop interface. All agroforestry systems can be studied by separating the growth and yield characteristics of the three basic sets of variables (a) the sole agricultural crop (b) the effects of the tree/crop interface on the crop and tree and (c) the growth of the tree as a whole crop.The interface can be studied wherever it occurs in natural situations, or conventional or systematic experimental layouts, but very simple forms of geometric layouts can be very space efficient.

---

Resumer La interfase arbol/cultivo, o como simplificar los estodios biologicoambientales de sistemas mixtos de cultivos agrogorestales.La interface arbol/cultivo es la clave para entender el potencial y las limitaciones biologicas de los sistemas agroforestales, y de la respuesta ambiental de las plantas dentro de los mismos. Todos los sistemas agroforestales pueden ser estudiados separando las caracteristicas de crecimiento y rendimiento de los tres conjuntos basicos de variables: (a) el cultivo agricola solo; (b) los efectos de la interfase arbol/cultivo sobre el cultivo y los arboles; y (c) la plantation forestal sola.La interfase puede ser estudiada cuando ella ocurre en situaciones naturales, o en arreglos experimentales convencionales o sistematicos, pero formas simples de arreglos geometricos pueden ser muy eficientes en el uso del espacio.

     

The role of extension in agroforestry development: evidence from western Kenya

The extension strategy used by the CARE International in Kenya Agroforestry Extension Project (AEP) is described. This strategy is evaluated in terms of documented changes in farmer's agroforestry practices and the importance of AEP relative to other changes in economic incentives, institutional support, and land use and tenure rules for agroforestry. The project served mainly to increase awareness of the multipurpose potential of agroforestry, expand available technical options, and strengthen local institutions. Its community-based extension approach was more suitable for local conditions than commodity-based, training-and-visit, farming systems, or media-based extension. Projects are encouraged to tailor extension design to local circumstances, use community participation to guide extension priorities, and use extensionists as catalysts and information brokers.Research undertaken while the author was a Principal Scientist at the International Council for Research in Agroforestry, Nairobi, Kenya.     

The espinal: agroforestry systems of the mediterranean — type climate region of Chile

The Central Valley of Chile is largely occupied by a pseudo-savanna called espinal consisting of a single dominant tree species, Acacia caven (Mol.) Mol. (Leguminosae), and some 215 annuals, most of which were inadvertently introduced from the Mediterranean Basin. The probable origin and current distribution of the espino (Acacia caven) and the espinales in Chile are described. Predominant production systems of the espinal in both the semiarid and subhumid regions of Chile are outlined, with emphasis on the later region. Causes of the current low levels of productivity are discussed, and various strategies for long-term improvement of the espinal are presented.     

Defining competition vectors in a temperate alley cropping system in the midwestern USA: 2. Competition for water

A study was carried out in an alley cropping system in the Eastern Maize Belt of the United States with the objective of quantifying the competition for water between trees (black walnut (Juglans nigra L.) and red oak (Quercus rubra L.) and maize (Zea mays L.). Spatial and temporal variation in soil moisture, tree and maize rooting patterns, tree and maize water uptake, and maize leaf area expansion were determined in three treatments; barrier (polyethylene root barriers separating maize and tree roots), trench (trenching without a polyethylene barrier), and no barrier (control). Significant temporal variation in soil moisture was observed in both black walnut and red oak alley cropping systems. The barrier and trench treatments resulted in higher soil moisture in the maize alley and lower soil moisture in the tree row than the no barrier treatment. Uptake of water by maize was higher in the barrier than the no barrier treatment. However, tree water uptake was higher in the no barrier treatment than in the barrier treatment because tree roots utilized water from the maize alley. Maize leaf area was negatively impacted by water stress in the no barrier treatment. Quantification of rooting patterns revealed that maize and tree roots were concentrated in the top 30 cm soil layer where water fluctuations were greatest. The barrier and trench treatments successfully eliminated the belowground root competition between trees and maize and resulted in greater leaf area and higher grain yields than the no barrier treatment. Thus, competition for water rather than competition for light seems to be critical in defining the productivity and sustainability of this alley cropping system.This revised version was published online in November 2005 with corrections to the Cover Date.     

Effect of cutting position on rooting and shoot growth of two poplar clones

One-year-old shoots from stooling beds of Populus × deltoides Walker and Populus jackii Northwest were collected in late fall to determine the effect of cutting position on rooting and growth of hardwood poplar cuttings. Cuttings with a minimum diameter of 9.0 mm were obtained from basal, middle and distal locations on the poplar shoot. Rooting and shoot growth were assessed in the greenhouse and under field conditions. Walker poplar cuttings collected from basal portions of the shoot and planted in the field had 87.6% rooting and 103.8 cm growth compared to 78.8% and 103.4 cm and 67.6% and 88.8 cm for middle and distal locations respectively. For Northwest rooting and growth under field conditions was 84.4% and 94.7 cm for basal, 78.4% and 90.5 cm for mid and 64.4% and 84.3 cm for distal locations. Rooting in the greenhouse was superior to the field. Walker cuttings had fewer roots and buds per cutting than Northwest, however, growth of Walker in the field was superior.     

Classification of agroforestry systems

Classification of agroforestry (AF) systems is necessary in order to provide a framework for evaluating systems and developing action plans for their improvement. The AF Systems Inventory (AFSI) being undertaken by ICRAF provides the background information for an approach to classification.The words system, sub-system and practice are commonly used in AF literature. An AF system refers to a type of AF land-use that extends over a locality to the extent of forming a land utilization type of the locality. Sub-system and practice are lower-order terms in the hierarchy with lesser magnitudes of role, content and complexity. In common parlance, however, these terms are used loosely, and almost synonymously.Several criteria can be used to classify and group AF systems (and practices). The most commonly used ones are the system's structure (composition and arrangement of components), its function, its socio-economic scale and level of management, and its ecological spread. Structurally, the system can be grouped as agrisilviculture (crops — including tree/shrub crops — and trees). silvopastoral (pasture/animals + trees), and agrosilvopastoral (crops + pasture/animals + trees). Other specialized AF systems such as apiculture with trees, aquaculture in mangrove areas, multipurpose tree lots, and so on, can also be specified. Arrangement of components can be in time (temporal) or space (spatial) and several terms are used to denote the various arrangements. Functional basis refers to the main output and role of components, especially the woody ones. These can be productive functions (production of basic needs such as food, fodder, fuelwood, other products, etc.) and protective roles (soilconservation, soil fertility improvement, protection offered by windbreaks and shelterbelts, and so on). On an ecological basis, systems can be grouped for any defined agro-ecological zone such as lowland humid tropics, arid and semi-arid tropics, tropical highlands, and so on. The socio-economic scale of production and level of management of the system can be used as the criteria to designate systems as commercial, intermediate, or subsistence. Each of these criteria has merits and applicability in specific situations, but they have limitations too so that no single classification scheme can be accepted as universally applicable. Classification will depend upon the purpose for which it is intended.Nevertheless since there are only three basic sets of components that are managed by man in all AF Systems, viz. woody perennials, herbaceous plants and animals, a logical first step is to classify AF systems based on their component composition, into agrisilvicultural, silvopastoral and agrosilvopastoral (or any other specialized) systems. Subsequently the systems can be grouped according to any of the purpose-oriented criteria. The resulting system name can thus have any one of the three basic categories as a prefix; for example agrisilvicultural system for soil conservation.Some of the major AF systems and practices of the tropics are grouped according to such a framework. The scheme appears a logical, simple, pragmatic and purpose-oriented approach to classification of AF systems.     

Use and management of secondary vegetation in a humid-tropical area

This work deals with the experimental management of secondary succession in a tropical forest region in Uxpanapa, Veracruz, México. The goal is to establish a system of diversified units, which will maintain production and biodiversity while obtaining valuable products, primarily for self-sufficiency, and secondarily as cash crops. Three different diversifield units of production have been identified: a) the traditional milpa, maize polyculture, b) the diversified home orchard and c) the enriched fallows. These units were established in three secondary forests areas, where once thinned or cleared, valuable annual and perennial species were introduced.Total biomass and product yields were analyzed, also labour invested on each production unit was recorded, units were compared on an efficiency basis. Maize yield of polyculture is low but total production is more than twice that of maize monoculture. Efficiency in the polyculture is also higher and its weeds were better controlled. After three years the milpa has become an orchard with more than 150 individual fruit trees belonging to 10 different species. Enriched secondary forests show the highest biomass production in the open treatment, 68% transmittance, and the highest survivorship in the moderate shade treatment, 37%.Schizolobium parahybum andCordia alliodora were the most successful forest species due to their fast growth.     

Mapping the territory: agroforestry awareness among Washington State land managers

There is growing interest in research to develop potential agroforestry models for temperate climates. In Washington State, recent studies and anecdotal information suggest that agroforestry is already employed by land managers, and if so, this experience should inform future research efforts. Because this population is not well defined, a mail survey was designed to: 1) Assess Washington land manager awareness of agroforestry, 2) assess perceptions of agroforestry as a land management tool, 3) assess the perceived potential opportunities or obstacles for land managers to practice agroforestry, and 4) identify landowner groups believed to be practicing agroforestry in Washington State.Three groups of land managers were surveyed: employees of the Soil Conservation Service (SCS), Washington State University Cooperative Extension Service (WSUCE) and OTHER, consisting of university faculty, private land managers, State and Federal land managers and owners of small natural resource businesses.Agroforestry was not a new concept for most (94%) respondents, further 55% of those familiar with agroforestry were practicing agroforestry or providing advice to landowners who were practicing agroforestry. Use in (government mandated) soil conservation plans on farmland (100% of all respondents) was the most frequently cited potential application for agroforestry in the state followed by range and pasture land and managing non-commercial forest land (both 84%), use on commercial forest plantation (83%) and fruit and nut orchards (61%).Diversifies land use (25%), enhanced productivity (18%), aesthetics (13%) and income diversity (13%) were the four most frequently cited potential advantages to practicing agroforestry. Lack of information (28%), lack of technical assistance (18%), establishment costs (14%) and not an established practice (14%) were the most frequently identified potential obstacles to practicing agroforestry. Respondents suggested there is great potential for application of agroforestry throughout the state, and non-industrial private forest land owners were selected for future study of this potential.     

Five years of Paulownia field trials in North Carolina

Performance of Paulownia elongata, Paulownia fortunei, and Paulownia×Henan 1 was monitored at three sites in North Carolina between 1996 and 2000, and P. elongata clones were tested at an additional two sites. The primary objective was to define the potential for growing Paulownia in the state. Species and clones within species differed in survival and height and diameter growth whenever genotype was included as a treatment. P. elongata was superior at two and P. fortunei was superior at one of the three sites that included P. elongata, P. fortunei, and P.×Henan 1. Trees produced through vegetative means were more likely to survive and were taller and of greater DBH than seed produced trees. Mortality in trees produced from seed was greater for P. fortunei and P. ×Henan 1 than for P. elongata. Application of animal waste or different rates of nitrogen as inorganic fertilizer did not have a pronounced effect on tree survival and growth.