Clothing temperature changes of phase change material-treated warm-up in cold and warm environments

The purpose of this study was to investigate the appropriate amounts of phase change materials to give objective and subjective wear sensations. Vapor-permeable water-repellent fabrics with (WR-PCM) and without (WR) octadecane containing microcapsules were obtained by wet-porous coating process. Then, calculating the area of the WR-PCM treated clothes, we estimated the total calories of the clothing by multiplying the heat of fusion and heat of crystallization of PCM to the calculated area. Wear tests were conducted in both warm environment (30°C, 65 % RH) and cold environment (5°C, 65 % RH) with sports warm up style experimental garments made with WR and WR-PCM fabrics. Rectal, skin, and clothing microclimate temperatures, saliva and subjective evaluation measurements were done during the wear test. There was no difference of rectal and mean skin temperatures between WR and WR-PCM, but the clothing microclimate temperature of WR-PCM under warm environment was slightly lower than that of WR. In cold environment, WR-PCM showed much higher temperature than in WR. Saliva change did not appear between clothes, but did between two environments. Although subjective sensation between WR and WR-PCM was not significantly different, WR-PCM was rated as cooler than WR in warm environment and as warmer than WR in cold environment. The results of this study indicated that octadecane containing microcapsules in water-repellent fabric provide cooling effect.     

Investigating the effect of various blend ratios of prepared masterbatch containing Ag/TiO2 nanocomposite on the properties of bioactive continuous filament yarns

In this research, possibility of producing and processing antibacterial organic/inorganic nanocomposite polypropylene filament yarns for permanent antimicrobial efficiency has been investigated. First PP powder and inorganic nanocomposite filler were mixed in a twin screw extruder and modified masterbatch was produced. Continuous filament yarn was made by a pilot plant melt spinning machine from the blend of PP granule and various blending contents of the prepared masterbatch. Pure PP and all other combined samples showed acceptable spinnability at the spinning temperature of 240 °C and take-up speed of 2000 m/min. After producing as-spun filament yarns, samples were drawn, textured and finally weft knitted. Physical and structural properties of as-spun and drawn yarns with constant and variable draw ratios were investigated and also tensile and crimp properties of textured yarns were evaluated. Moreover, the DSC, SEM, FTIR techniques have been used for characterization of samples. Finally antibacterial efficiency of knitted samples was evaluated. The experimental results indicated that the maximum crystallinity reduction of modified drawn yarns has reached to 5 %. The observed improvement in the tensile properties of modified as-spun yarns compared to the pure PP was significant. Drawing process improved generally the tensile properties of as-spun yarns. Tensile properties of modified textured and drawn yarns were higher than the pure PP. An optimum of antibacterial activity has been observed in the sample containing 0.75 wt% of nano-filler. It is interesting that the optimum of tensile properties has been also obtained for the sample with maximum bioactivity.     

Preparation of electroconductive,magnetic, antibacterial,and ultraviolet-blocking cotton fabric using reduced graphene oxide nanosheets and magnetite nanoparticles

The main goal of present study was the fabrication of cotton fabric with special functions, including electrical conductivity, magnetic, antibacterial, and ultraviolet (UV) blocking. In this regard, the cotton fabric was primarily coated with graphene oxide and then reduction of graphene oxide and synthesis of magnetite nanoparticles accomplished in one step. The alkaline hydrolysis of magnetite precursors and reduction of graphene oxide was simultaneously performed using sodium hydroxide to produce reduced graphene oxide/Fe₃O₄ nanocomposite on the fabric surface. The prepared cotton fabrics were characterized with field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The treated fabrics with reduced graphene oxide/Fe₃O₄ nanocomposite displayed a low electrical resistivity i.e. 80 kΩ/sq. Furthermore, the coated fabrics showed reasonable magnetic properties due to the presence of magnetite nanoparticles on the surface of cotton fabrics. Moreover, this process imparted proper antibacterial properties and UV blocking activity to cotton samples.     

Relationship between curing temperature and low stress mechanical properties of titanium dioxide catalyzed flame retardant finished cotton fabric

N-methylol dimethylphosphonopropionamide is a flame-retardant agent commonly combined with melamine resin and phosphoric acid catalyst to impart flame-retardant property to cotton fabrics. A co-catalyst titanium dioxide (TiO₂) is added into the formulation in order to improve the flame-retardant performance by enhancing the crosslinking reaction and physically attaching on to cotton fabrics. The fabrics cured at temperature of 150 °C and 170 °C have a better flame-retardant ability and can withstand multiple times of home laundering compared with those cured at temperature of 110 °C and 130 °C. The flame-retardant ability is further enhanced by treating the fabrics in the presence of TiO₂. In addition, the low stress mechanical properties measured by Kawabata Evaluation System for Fabric (KES-F) are altered after flame-retardant treatment. These changes are contributed by the formation of crosslinks after treatment, acid-catalyzed depolymerization in a strong acidic medium and the presence of co-catalyst TiO₂. In addition, the properties of cotton fabrics depend greatly on the choice of curing temperature. High curing temperature usually caused poor hand properties of the fabrics due to the extensive crosslinks formation. Lastly, the existence of TiO₂ in the treatment not only improves the reaction efficiency but also has positive enhancement with respect to compressional recovery ability and tensile properties.     

Development of nanofibrous membranes with far-infrared radiation and their antimicrobial properties

This study investigated the incorporation of nanoscale germanium (Ge) and silicon dioxide (SiO₂) particles into poly(vinyl alcohol) (PVA) nanofibers with the aim of developing nanostructures with far-infrared radiation effects and antimicrobial properties for biomedical applications. Composite fibers containing Ge and SiO₂ were fabricated at various concentrations of Ge and/or SiO₂ using electrospinning and layered on polypropylene nonwoven. The morphological properties of the nanocomposite fibers were characterized using a field-emission scanning electron microscope and a transmission electron microscope. The far-infrared emissivity and emissive power of the nanocomposite fibers were examined in the wavelength range of 5-20 μm at 37 °C. The antibacterial properties were quantitatively assessed by measuring the bacterial reductions of Staphylococcus aureus, Klebsiella pneumoniae, and Escherichia coli. Multi-component composite fibers electrospun from 11 wt% PVA solutions containing 0.5 wt% Ge and 1 wt% SiO₂ nanoparticles exhibited a far-infrared emissivity of 0.891 and an emissive power of 3.44·102 W m^?2 with a web area density of 5.55 g m^?2. The same system exhibited a 99.9 % bacterial reduction against both Staphylococcus aureus and Escherichia coli, and showed a 34.8 % reduction of Klebsiella pneumoniae. These results demonstrate that PVA nanofibrous membranes containing Ge and SiO₂ have potential in medical and healthcare applications such as wound healing dressings, skin care masks, and medical textile products.     

Dyeing and fastness properties of a reactive disperse dye on PET, nylon, silk and N/P fabrics

Dyeing and color fastness properties of a reactive disperse dye containing an acetoxyethylsulphone group on PET, Nylon, silk and N/P fabrics were examined. The reactive disperse dye exhibited almost the same dyeing properties on PET fabric as a conventional disperse dye except the level of dye uptake. The most appropriate pH and dyeing temperature for the dyeing of Nylon fabric were 7 and 100°C respectively. The build-up on Nylon fabric was good and various color fastnesses were good to excellent due to the formation of the covalent bond. Application of the reactive disperse dye on silk fabric at pH 9 and 80°C yielded optimum color strength. The rate of dyeing on Nylon fabric was faster than that on PET fabric when both fabrics were dyed simultaneously in a dye bath, accordingly color strength of the dyed Nylon was higher. The reactive disperse dye can be applied for one-step and one-bath dyeing of N/P mixture fabric with good color fastness.     

Nano-TiO<Subscript>2</Subscript> based multilayer film deposition on cotton fabrics for UV-protection

Nano-TiO₂ based multilayer nanocomposite films were fabricated on cationically modified woven cotton fabrics by layer-by-layer molecular self-assembly technique. Cationization process was used to obtain cationic surface charge on cotton fabrics. Attenuated total reflectance Fourier transform infrared spectroscopy analyses were used to verify the presence of cationic surface charge and multilayer films deposited on the fabrics. Scanning electron microscope micrographs of poly(sodium 4-styrene sulfonate)/TiO₂, nano polyurethane/TiO₂, and TiO₂/poly(diallyldimethylammonium chloride) multilayer films deposited on cotton fabrics were taken. With nano-TiO₂ based multilayer film deposition, the protection of cotton fabrics against UV radiation is enhanced. The UV protection durability of the self-assembled multilayer films deposited on the cotton fabrics was analyzed after 10 and 20 washing cycles at 40 °C for 30 min. Air permeability and whiteness value analysis were performed on the untreated and multilayer film deposited cotton fabrics. The effect of layer-by-layer deposition process on tensile strength properties of the warp and weft yarns was determined.     

Manufacture of UV absorbers and UV protection fabrics using microcapsules

This study aimed to develop UV protection fabrics by microencapsulation methods. The sol-gel method was used to manufacture spherical silica microcapsules in an O/W/O emulsion. UV protection fabrics were prepared by attaching microcapsules to cotton-knitted fabrics. The appropriate conditions for microencapsulation were 20 % (w/v) UV absorber content, 0.5 % (w/v) HPC addition concentration, 6 % (w/v) PEG addition concentration, 6 h agitation time, and 1000 rpm agitation speed. The particle distribution of microcapsules manufactured under the appropriate conditions was 2–12 μm, and the average particle size was 6.27 μm. With regard to the thermal characteristics of the microcapsules, the first peak appeared at 152 °C, with the second peak at 250 °C. Cotton-knitted fabrics treated with silica microcapsules maintained an 80–90 % UV protection rate even after repeated washing.     

Mechanical properties and crystallization behavior of polypropylene non-woven fabrics reinforced with POSS and SiO2 nanoparticles

PP/POSS and PP/SiO₂ composite non-woven fabrics filled with polyhedral oligomeric silsesquioxanes (POSS) and SiO₂ respectively using a convenient blending method were prepared through melt-blown process with corona charging. The morphology of the composite fibers and the distribution of POSS and SiO₂ nanoparticles in PP matrix were investigated by field-emission scanning electron microscope (FSEM) and transmission electron microscope (TEM), respectively. POSS and SiO₂ can act as nucleating agent and accelerate the crystallization process during nonisothermal cooling. The shear storage modulus G??, loss modulus G??, and complex viscosity ??* of non-woven fabric reduce when 1 wt % POSS was added and increase for PP5/POSS composite non-woven fabric compared with pure PP non-woven fabrics. However, all G??, G?? and ??* of PP/SiO₂ non-woven fabric decrease with increasing SiO₂ content owing to plasticization by SiO₂. Both stress and elongation at break of the PP/POSS melt-blown non-woven fabrics are improved compared with PP non-woven fabrics, however decrease when SiO₂ was added, as compared to the neat PP non-woven fabric. The onset temperature of decomposition for both the PP/POSS and PP/SiO₂ composite non-woven fabrics is higher (5?C10 °C) than pure PP and char content is increased with increasing POSS and SiO₂.     

Parametric study of CF4-plasma on the hydrophobicity of polyester synthetic leather

Atmospheric pressure plasma (APP) technology has been proven to be an effective method for improving the hydrophobicity of fabric surface. While many researchers have worked on apparel fabrics, polyester and synthetic leather fabrics, popular in the luxury textile market, have been examined rarely. In this regard, this paper reports the effects of APP treatment using tetrafluoromethane (CF₄) as the polymerizing monomer on hydrophobicity of polyester synthetic leather. The polyester synthetic leather samples were treated under various parameters and hydrophobicity was found to be greatly enhanced under a certain range of treatment conditions. An optimization of the treatment parameters was conducted and the results showed that a hydrophobic surface with a contact angle of 106 ° was achieved, compared to the untreated sample’s 0 °.     

Multifunctional modification of wool fabric using graphene/TiO<Subscript>2</Subscript> nanocomposite

In this study, a new finishing technique is introduced through treatment of wool fabric with graphene/TiO₂ nanocomposite. Graphene oxide/titanium dioxide nanocomposite first applied on the wool fabric by hydrolysis of titanium isopropoxide in graphene oxide suspension and then this coating chemically converted by sodium hydrosulfite to graphene/TiO₂ nanocomposite. The homogenous distribution of the graphene/TiO₂ nanocomposite on the fiber surface was confirmed by field emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray spectroscopy (EDS) and X-ray mapping. X-ray diffraction patterns proved the presence of titanium dioxide nanoparticles with a crystal size of 127 Å on the treated wool fabric. Also, the defect analysis based on X-ray photoelectron spectroscopy (XPS) established the composition of the nanocomposite. Other characteristics of treated fabrics such as antibacterial activity, photo-catalytic self-cleaning, electrical resistivity, ultraviolet (UV) blocking activity and cytotoxicity were also assessed. The treated wool fabrics possess significant antibacterial activity and photo-catalytic self-cleaning property by degradation of methylene blue under sunlight irradiation. Moreover, this process has no negative effect on cytotoxicity of the treated fabric even reduces electrical resistivity and improves UV blocking activity.     

Ladder-Structured Polysilsesquioxane/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanocomposites for Transparent Wear-Resistant Windows

As a protective layer for deformable displays, we synthesized ladder-type polysilsesquioxanes (LPSQs) containing cyclic epoxy as a curable unit. The mechanical properties after photo- and thermal-curing of LPSQs with a small amount of added Al₂O₃ nanoparticles were compared with those of the pure LPSQs. The prepared LPSQ-Al₂O₃ nanocomposites and the pure LPSQs exhibited comparable optical transparencies and thermal stabilities. In addition, the degree of conversion of the applied epoxy units in LPSQs and the resulting mechanical properties, as monitored by Fourier transform infrared spectroscopy and nanoindentation tests, indicated that the addition of nanoparticles to LPSQs moderately enhanced the epoxy conversion rate and remarkably improved the wear resistance, including hardness, after photo-/thermal-curing processes. The LPSQ-Al₂O₃ nanocomposites achieved higher wear resistance than epoxy-silica nanocomposites containing similar curable functional groups and reinforcing fillers (silica). The excellent mechanical properties of the LPSQ-Al₂O₃ nanocomposites could be attributed to three-dimensionally interconnected networks of organic-inorganic hybrid-type chemical structures in the LPSQ as well as additional reinforcement from amine-functionalized Al₂O₃ nanoparticles covalently interconnected with the LPSQ. We believe that the devised LPSQ-Al₂O₃ nanocomposites could serve effectively as a wear-resistant platform for deformable display windows.     

Effect of mercerization on mechanical, thermal and degradation characteristics of jute fabric-reinforced polypropylene composites

Jute fabric reinforced polypropylene composites were fabricated by compression molding technique. Fiber content in the composites was optimized at 45 % by weight of fiber by evaluating the mechanical parameters such as tensile strength, tensile modulus, bending strength, bending modulus. Surface treatment of jute fabrics was carried out by mercerizing jute fabrics with aqueous solutions of NaOH (5, 10 and 20 %) at different soaking times (30, 60 and 90 mins) and temperatures (0, 30 and 70 °C). The effect of mercerization on weight and dimension of jute fabrics was studied. Mechanical properties of mercerized jute-PP composites were measured and found highest at 20 % NaOH at 0 °C for 60 min soaking time. Thermal analytical data from thermogravimetric and differential thermal analysis showed that mercerized jute-PP composite achieved higher thermal stability compared to PP, jute fabrics and control composite. Degradation characteristics of the composites were studied in soil, water and simulated weathering conditions. Water uptake of the composites was also investigated.     

Synthesis of a dodecylphenylsiloxane oligomer resin/silica nanocomposite and its application to cotton fabrics

A novel dodecylphenylsiloxane oligomer resin/nanocomposite (PHDESR-SiO₂) was prepared by graft copolymerization between dodecyl modified phenylsiloxane resin with pendent epoxy groups (PHDESR) and amino-functionalized silica nanoparticles (BTEPA-SiO₂). PHDESR-SiO₂ was then used to prepare a super hydrophobic surface on cotton fabric by a facile solution-immersion process method. Chemical structures, chemical compositions, wettability, surface morphology, and thermal properties were investigated by Fourier Transform Infrared Spectrum (FT-IR), ¹H-NMR spectrum, X-ray photoelectron spectroscopy (XPS), static contact angle analyzer, scanning electron microscopy (SEM), Particle size distribution (PSD) and thermo-gravimetric analysis (TGA). The results showed that the target product PHDESR-SiO₂ has an anticipative structure with many micro/nanostructure tubercles, a cross-linked network hydrophobic organosilicon resin film and many clusters of cylindrical dodecyl molecular brushes. This created super hydrophobic structure on the surface of the treated cotton fabrics. XPS analysis indicated that the long carbon chain groups had a slight tendency to enrich the film-air interface. In addition, PHDESR-SiO₂ can provide good hydrophobicity for the treated fabric. As the dose of PHDESR-SiO₂ increased, the hydrophobicity of the treated fabric enhanced and consequently the water static contact angle reached 152.5 °. This had little influence on the softness, color, and gas permeability of the fabrics. This makes it slightly stiff at high doses, and the super-hydrophobic cotton fabric also had good launderability.     

<Emphasis Type="Italic">In situ</Emphasis> deposition of silver nanoparticles on the cotton fabrics

A novel method was developed to prepare the antibacterial cotton fabrics through in situ deposition of silver nanoparticles on the cotton fabrics by the reduction of Ag⁺ without any reductant and dispersant. The data showed that by immersing the cotton fabrics in 160 mM AgNO₃ solution at 90 °C, the amount of silver nanoparticles was increased from 0.6890 to 1.3561 mg per gram of fabrics with the increase of reaction time from 10 to 50 min. The obtained cotton fabrics showed excellent antibacterial activity and laundering durability, in which the bacterial reduction was still 98.5 and 94.3 % to Escherichia coli and Staphylococcus aureus, respectively, even after the fabrics were washed for 20 cycles. Thus, this facile in stitu reduction method without any other reducers or stabilizers may bring a promising and green strategy to produce functional cotton fabrics.     

Effect of high temperature treatment on electrochemical properties of activated carbon fabric in supercapacitor application

In this study, viscose rayon-based activated fabrics were used as the electrodes of supercapacitors. First, viscose rayon knitted fabrics underwent oxidation, carbonization and activation in a semi-open high-temperature erect furnace to produce activated carbon fabrics (ACFs). They were then treated at temperatures up to 1500 °C for one hour. Electrochemical properties of ACFs were investigated by cycle voltammetry and electrochemical impedance spectroscopy. The ACFs after high temperature treatment has improved conductivity and substantially increased mesopore ratio, yielding higher capacitor retention in rapid charging-discharging processes. It is shown that the ACFs treated at 1500 °C had the highest mesopore ratio of 83 %, specific surface area of 1254 m²/g and average pore diameter of 20.9 Å, resulting in lower resistance of 0.2 Ω-cm. In addition, this ACFs electrode showed the highest capacitance retention of 49 % at high charging speed of 250 mV/s.     

Superhydrophobic and Antibacterial Properties of Cotton Fabrics Treated with PVDF and nano-ZnO through Phase Inversion Process

Cotton fabrics exhibiting superhydrophobic and antibacterial properties were prepared through a non-solvent induced phase separation method using hydrophobic poly(vinylidene fluoride) (PVDF) and its hybrids with photocatalytic zinc oxide nanoparticles (nano-ZnO) as surface modifying agents for cotton fabric. The effects of coagulating medium and temperature on microstructural morphology and surface hydrophobictity of the cotton fabrics were investigated by FE-SEM observation and contact angle measurement. Superhydrophobic cotton fabrics exhibiting water contact angle higher than 150 ° could be obtained by coating the fabrics with solutions of PVDF and nano-ZnO followed by coagulation in ethanol as non-solvent. This phenomenon is considered to be originated from both chemically hydrophobic PVDF layer and physical micro- and nano-bumps formed on the surface of cotton fabric, which are essential requirements for Lotus effect. Moreover, antibacterial properties could be synergistically obtained by utilizing photocatalytic effect of nano-ZnO.     

Effect of ultrasonic laundering on thermophysiological properties of knitted fabrics

The paper focuses on the application of ultrasonic energy in textile laundering. In recent years, there has been an increasing interest in ultrasonic energy application in textile industry; however, the effect of ultrasonic laundering on the thermophysiological properties of knitted fabrics has not been studied yet. This study was conducted by using polylactic acid (PLA), cotton, polyethylene terephthalate (PET), and poly acrylic (PAC) fibres containing yarns and their blends. Knitted fabrics, single pique, were made from these yarns by using weft knitting machine. The fabrics were washed ten times for 15 and 60 minutes under 40 °C by using conventional and ultrasonic washing methods. The main aim was to determine the effect of washing methods on the thermophysiological properties of the fabrics. It is also aimed to analyse and evaluate the thermophysiological properties of the PLA fabrics. The incorporation of 100 % PLA and cotton/PLA yarns into single pique knitted fabrics has been attempted to produce for the first time and studied their thermal comfort properties. The results show that the washing processes have a critical importance for the tested fabrics in terms of thermal conductivity, thermal resistance, thermal absorbtivity, water vapour permeability, and heat loss. It has been also demonstrated that the fabric cleaning by using ultrasonic method enhanced the properties of tested fabrics such as thermal conductivity and % recovery. It was also noted that 15 minutes ultrasonically washed fabrics had significantly lower thermal resistance as compared to conventionally washed fabrics.     

Thermal and mechanical properties of modified CaCO3 filled poly (ethylene terephthalate) nanocomposites

Poly(ethylene terephthalate) (PET)/CaCO₃ and PET/modified-CaCO₃ (m-CaCO₃) nanocomposites were prepared by melt blending. The morphology indicated that m-CaCO₃ produced by reacting sodium oxalate and calcium chloride, was well dispersed in PET matrix and showed good interfacial interaction with PET compared to CaCO₃. No significant differences in the thermal properties such as, glass transition, melting and degradation temperatures, of the nanocomposites were observed. The thermal shrinkage of PET at 120 °C was 10.8 %, while those of PET/CaCO₃ and PET/m-CaCO₃ nanocomposites were 2.9–5.2 % and 1.2–2.8 %, respectively depending on filler content. The tensile strength of PET/CaCO₃ nanocomposite decreased with CaCO₃ loading, whereas that of PET/m-CaCO₃ nanocomposites at 0.5 wt% loading showed a 17 % improvement as compared to neat PET. The storage modulus at 120 °C increased from 1660 MPa for PET to 2350 MPa for PET/CaCO₃ nanocomposite at 3 wt% loading, and 3230 MPa for PET/m-CaCO₃ nanocomposite at 1 wt% loading.     

Mechanical and moisture absorption characterization of PLA composites reinforced with nano-coated flax fibers

This research is intended to improve the interface between the fibers and the matrix and limit water absorption of bio-based material thereby decreasing degradation of the composites when they are exposed to external environment such as high temperature and humidity. In this study, flax fibers were treated with an organic surface coating containing SiO₂ nanoparticles. This coating was a dispersion of silica fume in epoxy. One composite was also made with raw fibers as reference as well as one sample of pure PLA. Flax fibers/PLA composites were manufactured by hot pressing by stacking 4 PLA films and 3 pieces of flax fabric. Morphology and dispersion of the coating on the fibers was observed by scanning electron microscopy (SEM), small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). Accelerated ageing was carried out on the 3 materials by placing them in a 50 °C water bath until saturation to investigate the influence of the coating on water diffusion. Mechanical properties of the different composites were investigated by tensile (before and after conditioning) and short beam shear (SBS) testing in order to evaluate the impact of the coating on the interfacial properties of the materials. The results show that the fibers surface was homogenized and that a better adhesion was reached because of the coating. Coating the fibers also allowed the decrease in water uptake by more than 10 % and their protection during conditioning, preserving their mechanical properties.