Collaborative study of a method for chemical confirmation of the identity of aflatoxin.

The chemical method for confirmation of the identity of aflatoxin by derivative formation directly on the TLC plate was studied collaboratively by 8 participants. The results show that aflatoxin B-1 was confirmed in 17 of 17 sample extracts representing 15 mu-g aflatoxin B-1/kg peanut butter, in 13 of 16 extracts representing 5 mu-g/kg, and in none of the 7 aflatoxin-free extracts. Collaborators commented that the method was easily performed and gave good results. The method has been adopted as official first action.     

Reverse phase liquid chromatographic determination and confirmation of aflatoxin M1 in cheese

A systematic method is proposed for determination and confirmation of aflatoxin M1 in cheese by liquid chromatography (LC). A sample of cheese is extracted with chloroform, cleaned up on 2 silica gel columns followed by a Sep-Pak C18 cartridge, and chromatographed on a 5 microns octadecyl silica column with fluorometric detection. The sample extract or standard is treated with n-hexane-trifluoroacetic acid (TFA) (4 + 1) for 30 min at 40 degrees C. Analysis by LC with TFA-treatment of the extract provides quantitative data. Multiple assays of 5 samples of Gouda cheese spiked with aflatoxin M1 at levels of 0.5, 0.1, and 0.05 ng/g showed average recoveries of 93.2, 91.6, and 92.4%, with coefficients of variation of 2.63, 3.97, and 4.52%, respectively. Assay of 5 naturally contaminated cheeses resulted in 0.051-0.448 ng/g of aflatoxin M1. Limit of quantitation is about 0.01 ng/g. The identity of aflatoxin M1 is confirmed by treating aflatoxin M1 or the M2a derivative with TFA-methanol (or ethanol) (3 + 1). The TFA-methanol reaction products of M2a could be detected quantitatively.     

Direct enzyme-linked immunosorbent assay for determining aflatoxin M1 at picogram levels in dairy products

Protocols for detecting picogram quantities of aflatoxin M1 in dairy products were established. Milk samples were subjected to a reverse phase Sep-Pak C18 cartridge treatment before analysis by an enzyme-linked immunosorbent assay (ELISA) according to previously published procedures. M1 in yogurt, brick cheddar, and ripened Brie cheese was extracted by a modified Pons method, subjected to a normal phase silica cartridge treatment, and analyzed by ELISA. The detection limits for M1 in milk, yogurt, cheddar, and Brie were 10, 10, 50, and 25 ppt (ng/kg), respectively. Recovery for M1 added to these products was in the range 70-110%. Good agreement was found for M1 levels in several naturally contaminated milk samples analyzed by both ELISA and liquid chromatography.     

Improved method for confirmation of identity of aflatoxins B1 and M1 in dairy products and animal tissue extracts

A method is described for confirming the identity of aflatoxins B1 and M1 in dairy products and liver extracts on a thin layer plate. Extracts and standards containing aflatoxins B1 and M1 are spotted on 10 x 10 cm plates, which are developed 2-dimensionally in mixtures of isopropanol-acetone-chloroform. After the first development, trifluoroacetic acid-hexane (1 + 4) is sprayed on that part of the plate containing the separated extract components and the underdeveloped standard spots of B1 and M1, and the plate is heated 6-8 min at 75 degrees C. Then the plate is developed in a second direction, and the reaction products of B1 and M1 with trifluoroacetic acid from the extract are compared with the same derivatives of the respective standards. The method has been used successfully on extracts of milk, cheese, and liver containing 0.1 ng B1 or M1/g and can be completed in 35-45 min.     

Development and application of solvent-free extraction for the detection of aflatoxin M1 in dairy products by enzyme immunoassay

The official methods for the quantification of aflatoxin M1 in dairy products (cheese and yogurt) include extraction into dichloromethane or chloroform, evaporation of the solvent, partitioning of the reconstituted residue with hexane, and subsequent analysis. To secure a rapid and inexpensive screen for aflatoxin M1 contamination, a sensitive competitive ELISA, using a rabbit polyclonal antibody, was developed for measuring aflatoxin M1 in milk and used in a comparative study for measuring the extraction efficiency of aflatoxin M1 in aqueous or organic solvent buffers using yogurt samples. An aqueous sodium citrate solution was found to be suitable for extracting aflatoxin M1, thus eliminating the need for organic solvents. The citrate extraction proved to be efficient (recovery ranged from 70 to 124%) in fortified samples of very different kinds of dairy products, including yogurt and six types of cheese. Fourteen yogurt and cheese samples were extracted with citrate solution and analyzed by ELISA. A good correlation was observed (y=0.95x-0.59, r2=0.98) when the data were compared with those obtained through the official method, across a wide range of aflatoxin M1 contaminations (10-200 ng/kg).     

Fluorimetric determination of aflatoxin M1 in cheese

A simple and sensitive method is proposed for the determination of aflatoxin M1 in cheese. The ground cheese sample is extracted with acetone-water (3 + 1). Acetone is evaporated under vacuum, and the aqueous phase is passed through a C18 disposable cartridge. After the cartridge is washed with acetonitrile-water (1 + 9), the toxin is eluted with acetonitrile. The extract is then cleaned up on a silica cartridge. Final analysis is performed by 2-dimensional thin layer chromatography (TLC) combined with fluorodensitometry or by liquid chromatography on a reverse phase C18 column with fluorescence detection. Recovery is greater than 90%, and the coefficient of variation is 6% or less. The detection limit is in the range of 10 ng/kg. The identity of aflatoxin M1 is confirmed by formation of the M2a or acetyl-M1 derivative and rechromatography.     

Thin layer chromatographic confirmation of aflatoxin M1 extracted from milk

Aflatoxin M1 can be confirmed directly on a thin layer plate by reacting the toxin with a mixture of reagents containing p-anisaldehyde. This confirmatory procedure requires only 2 elutions in the same direction using 2 different solvents. The mixture containing p-anisaldehyde is overspotted on M1 after the plate has been developed in toluene-ethyl acetate-ethyl ether-formic acid (25 + 35 + 40 + 5). The plate is heated at 110 degrees C for 10 min and then developed in hexane-acetone-chloroform (15 + 50 + 35). The Rf value of the green fluorescent derivative is less than that of the M1 standard. This confirmatory procedure requires only one-dimensional TLC, so several sample extracts and the standard can be run simultaneously. The minimum detectable quantity of aflatoxin M1 on the TLC plate with this test is 0.3 ng. p-Anisaldehyde reagent solution may also be used as a spray reagent for the confirmation of aflatoxin M1. The procedures described were satisfactory for confirming the mycotoxin in spiked samples of powdered and liquid milk.     

Negative ion chemical ionization mass spectrometric method for confirmation of identity of aflatoxin B1: collaborative study

An interlaboratory study of a negative ion chemical ionization mass spectrometric (MS) confirmation procedure for aflatoxin B1 was conducted in laboratories in the United States, England, and West Germany. Twelve partially purified, dry film extracts from naturally and artificially contaminated roasted peanuts, cottonseed, and ginger root containing varying quantities of aflatoxin B1 were distributed to the participating laboratories. The extracts required additional cleanup before MS analysis, using either an acidic alumina column and preparative thin layer chromatography (TLC) or a 2-dimensional TLC procedure. Recovery of purified aflatoxin B1 was influenced by the degree of recovery of sample from acid alumina and/or the TLC plate and incomplete elution of aflatoxin B1 from silica gel. Factors affecting MS confirmation included the purity and recovery of aflatoxin and MS instrument sensitivity. Aflatoxin B1 identity was confirmed in 19.5, 90.9, and 100% of samples containing less than 5, 5-10, and greater than 10 ng aflatoxin B1/g product, respectively, by solid probe introduction using full mass scans. The MS method has been adopted official first action.     

Liquid chromatographic determination of aflatoxin M1 in milk

The official AOAC method for aflatoxin M1 in milk was modified by replacing cellulose column chromatography with cartridge chromatographic cleanup and replacing thin layer chromatographic (TLC) determination with liquid chromatographic (LC) quantitation to yield a new method for bovine and porcine milk. An acetone extract of milk is treated with lead acetate and defatted with hexane, and M1 is partitioned into chloroform as in the AOAC method. Chloroform is removed by evaporation under a stream of nitrogen at 50 degrees C. The residue is dissolved in chloroform, the vessel is rinsed with hexane, and the 2 solutions are applied in sequence to a hexane-activated silica Sep-Pak cartridge. Less polar impurities are removed with hexane-ethyl ether, and M1 is eluted with chloroform-methanol, and determined by C18 reverse phase LC using fluorescence detection. Recoveries of M1 added to bovine milk at 0.25, 0.50, and 1.0 ng/mL were 90.8, 93.4, and 94.1%, respectively. The limit of detection was less than 0.1 ng M1/mL for both bovine and porcine milk.     

Rapid reverse phase liquid chromatographic determination of aflatoxin M1 in milk

A rapid, economical, and reliable liquid chromatographic (LC) method is described for determination of aflatoxin M1 in milk. The method includes an improved AOAC extraction procedure, cleanup of the extract on a silica cartridge, and LC quantitation. Alternatively, a rapid column cleanup procedure can be used. Milk artificially spiked with aflatoxin M1 at 0.05, 0.1, and 0.5 ppb was analyzed using both new approaches as well as an AOAC method coupled with LC for quantitation of the toxin. Recovery of aflatoxin M1 by the first approach of the new method ranged between 93.4 and 99.1%, and for the alternative procedure between 92.4 and 96.8%. The AOAC method gave lower recovery (85.6-90.7%) of toxin, but the results from this method had a somewhat smaller standard deviation for replicate analyses than did results of the new method.     

Determination of aflatoxin M1 in milk and milk products contaminated at low levels

A new method is described for the determination of aflatoxin M1 in milk and dairy products by thin layer chromatography. The main characteristic is the extraction system using an alkaline solution. Lipids are removed by centrifuging at low temperatures, and the aflatoxins are then extracted with CHCl3. The method has 2 options: Technique II (detection limit 0.02 ppb) requires cleanup on a chromatographic column; this is not necessary in Technique I (detection limit 0.1 ppb). The recovery rate in both techniques is over 92.8% in milk and yoghurt. This method may also be used for other aflatoxins. Because of the advantages of the method, Technique II is recommended for aflatoxin M1 control in milk, where a low detection limit is necessary. Technique I is proposed for experimental aflatoxin production studies in dairy products, which require analysis of a large number of samples but which do not require a very low detection limit.     

Rapid thin layer chromatographic determination of aflatoxin M1 in powdered milk

A method has been developed for the detection of aflatoxin M1 in milk. The toxin is extracted with chloroform, the extract is evaporated, and the residue is partitioned between carbon tetrachloride and an aqueous saline-methanol solution. The toxin is once again extracted with chloroform from the methanol solution and analyzed by thin layer chromatography. The limit of detection of M1 in powdered milk is 0.5 microgram/kg; recoveries of added M1 are about 83%. The limit of detection can be improved to 0.3 microgram/kg if the plate is sprayed with an aqueous solution of H2SO4 after development.     

Temperature-independent pectin gel method for coliform determination in dairy products: collaborative study

Ten laboratories participated in a collaborative study to compare a pectin-based violet red bile (VRB) method with the VRB agar-based standard method for estimation of coliform bacterial counts in 7 different dairy food groups: cream, cheddar cheese, cottage cheese, homogenized milk, raw milk, sour cream, and yogurt. Each laboratory analyzed 8 samples of each food group as sample pairs prepared at high, medium, and low inoculum levels, and an uninoculated control pair. Overall mean log counts were higher for the pectin gel method in 18 of 21 cases (7 samples at 3 inoculum levels); 12 results were significantly higher (P less than 0.01) than those for the VRB agar method. Of the 3 higher VRB agar method means, 2 were not significant at P less than 0.10, and one was of borderline significance (0.05 less than P less than 0.06). Repeatability variation (sr) favored the pectin gel method in 14 of 21 cases; 7 were highly significant differences (P less than 0.01). None of the 7 results favoring the VRB agar method was statistically significant. Reproducibility variation (sR) favored the pectin gel method in 14 of 21 results. These data indicate that the pectin gel method gives higher recovery of coliforms with better precision than does the VRB agar method, and strongly support the suitability of the pectin gel method as an alternative to the agar-based VRB method for coliform counts in dairy products. The pectin gel method has been adopted official first action.