Ibuprofen Sorption to Coastal Plain Soils

Ibuprofen is commonly detected in onsite wastewater systems. Such onsite systems are abundant in coastal plain areas, globally. Coastal plain soils have unique mineralogy. Rapid subsurface transport may occur in coastal plain soils due to their characteristic permeable soils and seasonally high water tables. Laboratory batch sorption studies were conducted on Norfolk, Goldsboro, and Lynchburg, three archetypical coastal plain soils, with varying physicochemical properties, to evaluate ibuprofen sorption. Sorption distribution coefficients (K_D values) across all three soils ranged from 0.63 to 1.26 L kg^?1. Sorption of ibuprofen to Norfolk and Goldsboro soils was able to be modeled using a Freundlich isotherm; however, the Lynchburg soil, was not, likely due to soil heterogeneity. In general, sorption of ibuprofen was influenced by soil organic carbon content.     

Clay,Organic Carbon,Available P and Calcium Carbonate Effects on Phosphorus Release and Sorption–Desorption Kinetics in Alluvial Soils

Information on phosphorus (P) release kinetics and sorption–desorption in soils is important for understanding how quickly reaction approaches equilibrium and replenishes the depleted soil solution. Laboratory experiments were conducted to study the P release and sorption–desorption kinetics in soils differing in clay, soil organic carbon (SOC), available P, and calcium carbonate (CaCO₃) contents. Phosphorus release from soils proceeded in two phases: initially faster phase followed by a slower phase as equilibration progressed. Elovich equation (R² ≥ 0.97**) described well the P release versus time data. P release coefficients for power function were significantly correlated with available P and SOC. Freundlich sorption constants increased with increase in clay and CaCO₃ content. With increase in SOC and available P concentration in soils, substantial reduction in sorption constants was observed. It was concluded that for efficient P management, it is important to take into account soil texture, the existing soil P level, SOC content, and soil calcareousness.     

Sorption and desorption of diuron and norflurazon in Florida citrus soils

The potential for surface and groundwater contamination of soil applied herbicides is partly dependent on soil properties. Sorption and desorption of diuron and norflurazon were studied in seven soils representative of the southern citrus-belt of Florida using the batch-equilibrium technique. Sorption of herbicides was influenced by soil properties. Sorption coefficients (K _d) ranged from 0.84 to 3.26 mL g^?1 for diuron and 0.63 to 2.20 mL g^?1 for norflurazon indicating weak to moderate binding of herbicides to soil. For norflurazon, K _dwas significantly related to organic C content, soil pH, and cation exchange capacity. For diuron, absence of a significant relationship between K _dand selected soil properties suggests that the soil properties other than those studied may play a role in determining sorption on these soils. Desorption studies showed that higher amounts of diuron and norflurazon was desorbed by water than by 0.5 M CaCl₂. An inverse relationship was apparent between herbicides sorbed and that which was desorbed among the soils studied. The soil which exhibited higher sorption had lower desorption and the soil which exhibited lower sorption had higher desorption.     

Predicting phosphorus sorption isotherm parameters in soil using data of routine laboratory tests

Knowledge of phosphorus(P) sorption dynamics across different soil types could direct agronomic and environmental management of P. The objective of this study was to predict P isotherm parameters for a national soil population using data of routine laboratory tests. Langmuir and Freundlich sorption parameters were calculated from two different ranges(0–25 and 0–50 mg P L~(-1)) using an archive of representative agricultural soil types from Ireland.Multiple linear regression(MLR) identified labile forms of aluminium(Al) and iron(Fe), organic matter(OM), cation exchange capacity(CEC), and clay as significant drivers. Langmuir and Freundlich sorption capacities, Freundlich affinity constant, and Langmuir buffer capacity were predicted reliably, with R~2 of independent validation 0.9. Sorption isotherm parameters were predicted from P sorbed at a single concentration of 50 mg P L~(-1)(S_(50)). An MLR prediction of P sorption maximum in the 0–50 mg P L~(-1) range was achieved, to an accurate standard, using S_(50), OM, and Mehlich-3 Fe(R~2 of independent calibration and validation being 0.91 and 0.95, respectively). Using Giles' four shapes of isotherms(C, L, H, and S), L non-strict-and C-shaped isotherm curves accounted for 64% and 27% of the soils, respectively. Hierarchical clustering identified a separation of isotherm curves influenced by two ranges of Mehlich-3 Al. Soils with a low range of Mehlich-3 Al(2.5–698 mg kg~(-1)) had no incidence of rapid sorption(C shape). Single point indices, Al, or available soil data make the regression approach a feasible way of predicting Langmuir parameters that could be included with standard agronomic soil P testing.     

Cadmium soil sorption at low concentrations: VIII. correlation with soil parameters

Cadmium distribution coefficients, K _d were determined at low Cd concentrations (solute: 0.2 to 3.0 μg Cd dm^?3, soil: 0.044 to 1.1 mg Cd kg^?1) for 63 Danish agricultural soils. The K _d values ranged from 15 to 2450 L kg^?1. About 40% of the soils had K _d values below 200 L kg^?1. The observed K _d values correlated very well with soil pH (r ² = 0.72). Introducing soil organic matter content as a second parameter improved the correlation some (r ² = 0.79). No further improvements were obtained by introducing traditional soil parameters as clay, silt, fine sand, coarse sand and CEC or ‘reactive’ parameters as oxyhydroxides of Mn, Fe and Al. The identified regression equation for predicting K _d values indicates that K _d approximately doubles for each 0.5 unit increase in pH or 2% increase (weight basis) in organic matter content.     

Sorption of s-Triazine Herbicides in Organic Matter Amended Soils: Fresh and Incubated Systems

Fresh amendment of soil with sewage sludge and composted sewage sludge resulted in increased sorption of three s-triazine herbicides: atrazine, ametryn and terbuthylazine. The extent of increased sorption (as evaluated by sorption coefficients K_d or K_f) was a function of soil type, such that sorption in amended organic carbon-poor soil (0.4% OC) was more enhanced than in amended organic carbon-rich soil (1.55% OC). Despite significant differences between the organic amendments in terms of humic and fulvic acid content, humin content, soluble organic matter content, total organic matter content, and H/C and O/C atomic ratios, organic matter composition had no discernible effect on either sorption distribution coefficients or on isotherm linearity in amended soils. Soils amended with composted sludge had the same sorption potential as did soils amended with the analogous uncomposted sludge. After incubating soil-sludge mixtures for a year at room temperature, organic matter content decreased to original pre-amendment levels. Sorption coefficients for the three compounds similarly decreased to initial pre-amendment values. Organic carbon normalized sorption coefficients (K_oc) were essentially identical in the soils, amended soils, and incubated amended soils, indicating that sludge and compost derived organic matter does not have a significantly different sorption capacity as compared with the original soils, despite compositional differences.     

Degradation of [carboxyl-14C] 2,4-D and [ring-U-14C] 2,4-D in 114 agricultural soils as affected by soil organic carbon content

This study compared the degradation of [carboxyl-¹⁴C] 2,4-dichlorophenoxyacetic acid (2,4-D) (C2,4-D) and [ring-U-¹⁴C] 2,4-D (R2,4-D) in 114 agricultural soils (0–15 cm) as affected by 2,4-D sorption and soil properties (organic carbon content, pH, clay content, carbonate content, cation exchange capacity, total microbial activity). The sample area was confined to Alberta, Canada, located 49–60° north longitude and 110–120° west latitude and soils were grouped by soil organic carbon content (SOC) (0–0.99%, 1–1.99%, 2–2.99%, 3–3.99% and >4% SOC). Degradation rates of C2,4-D and R2,4-D followed first-order kinetics in all soils. Although total microbial activity increased with increasing SOC, degradation rates and total degradation of C2,4-D and R2,4-D decreased with increasing SOC because of increased sorption of 2,4-D by soil and reduced bioavailability of 2,4-D and its metabolites. Rates of R2,4-D degradation were more limited by sorption than rates of C2,4-D degradation, possibly because of greater sorption and formation of bound residues of 2,4-D metabolites relative to the 2,4-D parent molecule. Based on the sorption and degradation parameters quantified, there were two distinct groups of soils, those with less than 1% SOC and those with greater than 1% SOC. Specifically, soils with less than 1% SOC had, on average, 2.4 times smaller soil organic carbon sorption coefficients and 1.4 times smaller 2,4-D half-lives than soils with more than 1% SOC. In regional scale model simulations of pesticide leaching to groundwater, covering many soils, input parameters for each pesticide include a single soil organic carbon sorption coefficient and single half-life value. Our results imply, however, that the approach to these regional scale assessments could be improved by adjusting the values of these two input parameters according to SOC. Specifically, this study indicates that for 2,4-D and Alberta soils containing less than 1% SOC, the 2,4-D pesticide parameters obtained from generic databases should be divided by 2.5 (soil organic carbon sorption coefficient) and 1.5 (half-life value).     

Cadmium sorption by two acid soils as affected by clearing and cultivation

Abstract

The objective of this study was to determine the effect of clearing and cultivation on the sorption of cadmium (Cd) by two acid soils from Zimbabwe with differing cultivation stories. In their original state, not cleared‐not cultivated (virgin soils), the two soils exhibited noticeable and similar capacities to sorb Cd. The Mazowe soil contains the highest level of organic matter (40 g kg^‐1) and a effective cation exchange capacity (ECEC) of 144 mmol_c kg^‐1. Yet, Bulawayo soil (23.5 g kg^‐1 organic matter and ECEC of 146 mmol_c kg^‐1) has higher pH and Mn and Fe oxide content and these characteristics seemed to counteract the effect of lower organic matter. After 50 years of cultivation, The Mazowe soil has lost 60% of its organic matter and ECEC, and consequently the ability of its soil matrix to bind Cd has proportionally decreased. In Bulawayo (cleared in 1983 and first ploughed in 1984), on the contrary, the organic matter and ECEC of the cultivated soil remains over 95% of the values on its virgin counterpart. In this soil, the retaining ability for Cd has not still been affected. In the two soils Cd sorption was highly pH‐dependent. The extent of sorption was minimal under acidic conditions and increased sharply as the pH was raised. The immediate reversibility of the sorption process proved to be very low. When sorption and desorption data were compared it was clear that soil characteristics like high organic matter and oxide content which showed to enhanced Cd sorption, contributed at the same time to slow down the backward reaction.     

Differences in sorption behavior of the herbicide 4-chloro-2-methylphenoxyacetic acid on artificial soils as a function of soil pre-aging

Purpose

The sorption behavior of the herbicide 4-chloro-2-methylphenoxyacetic acid (MCPA) to three different artificial soil mixtures was investigated. Artificial soils serve as model systems for improving understanding of sorption phenomena.

Materials and methods

The soils consisted of quartz, ferrihydrite, illite, montmorillonite, and charcoal. In a previous study, several selected mixtures had been inoculated with organic matter, and microbial aging (incubation) had been performed for different periods of time (3, 12, and 18?months) before conducting the sorption experiments. The effect of this pre-incubation time on the sorption behavior was determined. Interaction of MCPA with soil surfaces was monitored by aqueous phase sorption experiments, using high-performance liquid chromatography/ultraviolet and in selected cases Fourier-transformed infrared spectroscopy.

Results and discussion

The sorption behavior showed large differences between differently aged soils; Freundlich and linear sorption model fits (with sorption constants K _f , 1/n exponents, and K _d values, respectively) were given for pH?=?3 and the unbuffered pH of ??7. The largest extent of sorption from diluted solutions was found on the surfaces with a pre-incubation time of 3?months. Sorption increased at acidic pH values.

Conclusions

Regarding the influence of aging of artificial soils, the following conclusions were drawn: young artificial soils exhibit stronger sorption at lower concentrations, with a larger K _f value than aged soils. A correlation with organic carbon content was not confirmed. Thus, the sorption characteristics of the soils are more influenced by the aging of the organic carbon than by the organic carbon content itself.     

Predicting potassium fertilizer requirement using exchange isotherm approach in relation to soil characteristics

Determining potassium (K) fertilizer requirement using sorption isotherms is considered more accurate than conventional soil K tests. A total of 59 surface soil samples were used to establish K exchange isotherm. To evaluate K requirement sorption test, a glasshouse experiment using perennial ryegrass (Lolium perenne, cv. Roper) was carried out on 10 soil samples. The experiment was laid out as a completely randomized design with four replications and four K levels (K₀, K₂₀, K₄₀, K₈₀). Concentrations of K in solution established by adding K in the pots estimated from the sorption curve ranged from 20 to 80 mg K l^?1 including check treatment (no K). Dry matter yield of ryegrass in most soils approached maximum as adjusted K levels were increased to 20 mg K l^?1. The amounts of K required to bring the soils to 20 mg l^?1 in soil solution varied among soils and ranged from 99 to 399 mg kg^?1, on average 205 mg kg^?1 soil. It was found that a useful regression model for the prediction of standard K requirement (K₂₀) included the combination of plant available K extracted by NH₄OAc (Av-K) and clay content: K₂₀ = ?41 ? 0.63 Av-K + 9.0 Clay (R² = 0.61, p < 0.001, n = 59).     

Phosphate sorption characteristics of major soils in Okinawa,Japan

Abstract

Phosphate sorption isotherms were determined for 16 representative major soils developed from different parent materials on Okinawa. Phosphate sorption characteristics were satisfactorily described by the Langmuir equation, which was used to determine phosphorus (P) sorption maxima of the soils. Phosphate sorption maxima ranged from 630 to 2208 mg P kg^‐1 soil (mean 1,362 mg P kg^‐1). The standard P requirement (i.e., the amount of P required to attain 0.2 mg P L^‐1 equilibrium solution) followed the same trend as sorption maximum (r =0.94***), with values ranging from 132 to 1,020 mg P kg^‐1 soil (mean 615 mg P kg^‐1). This mean value corresponds to fertilizer addition of 923 kg P ha^‐1 indicating that the soils have high P fertilizer requirements. Results of simple linear regression analysis indicated that sorption maximum was significantly correlated with clay content, organic matter, oxalate iron (Fe), pyrophosphate Fe, DCB aluminum (Al), oxalate Al, and pyrophosphate Al, but not with DCB Fe, pH, or available P content. The best regression model for predicting sorption maximum was the combination of clay, organic matter, pyrophosphate Fe, and DCB Al which altogether explained 79% of the variance in sorption maximum. The equation obtained could offer a rapid estimation of P sorption in Okinawan soils.     

Low-molecular weight organic acids improve plant availability of phosphorus in different textured calcareous soils

Understanding the role of organic acids on phosphorus (P) sorption capacity of soils is very important for its economic and friendly management. Combining P application with low-molecular weight organic acids could result in its higher plant availability for prolonged time. Therefore, citric and oxalic acid (at the rate of 1.0 mM kg^?1 soil) were evaluated for their effect on P sorption capacity and its plant availability in two different textured calcareous soils. Organic acids decreased P sorption capacity and organic carbon partition coefficient (K_oc) whereas increased Gibbs free energy (ΔG) of P. Organic-acid-treated soils required lesser quantity of P fertilizer to produce soil solution P concentration optimum for plant growth (external P requirement [EPR_0.2]), that is, 0.2 mg L^?1. Citric acid was efficient than oxalic acid in the above effects. P sorption parameters of Freundlich model were negatively correlated with lime potential and ΔG whereas had positive correlation (P < 0.05) with EPR_0.2 and K_oc. Incubation with oxalic acid increased available P in loamy sand and loam soil by 20% and 30%, respectively. Thus, organic acids could help reduce application rate of P fertilizer through lowering its adsorption in highly P-fixing soils without compromise on yield.     

Effects of Different Rates of Ca2+ Addition on Respiration and Sorption of Water-Extractable Organic C to a Vertisol Subsoil

It is well known that calcium (Ca²⁺) plays an important role in binding organic matter to clay. However, most previous studies were conducted with either topsoil or pure aluminosilicates. Less is known about the effect of Ca²⁺ on binding of organic matter to clay-rich subsoils, which have lower organic-matter contents than topsoils, and their clays are more strongly weathered than pure aluminosilicates. Two experiments were conducted with a Vertisol subsoil (69% clay): a laboratory incubation and a batch sorption. The mineral substrate in the incubation experiment was pure sand alone or sand amended with 300 g clay kg^?1. Powdered calcium sulfate (CaSO₄) at rates of 0, 5, 10, and 15 g Ca kg^?1 and mature wheat residue at a rate of 20 g kg^?1 were added to this mineral substrate and the water content was adjusted to 70% of water-holding capacity. Carbon dioxide release was measured for 28 days. Cumulative respiration per g soil organic carbon (C) (SOC from clay and residues) was increased by clay addition. Increasing Ca²⁺ addition rate decreased cumulative respiration in the sand with clay but had no effect on respiration in the pure sand. Clay and Ca²⁺ addition had no significant effect on microbial biomass carbon (MBC) per g SOC but clay addition reduced the concentration of potassium sulfate (K₂SO₄)–extractable C per g SOC. For the batch sorption experiment, the subsoil was mixed with 0 to 15 g Ca kg^?1 and water-extractable organic C (WEOC) derived from mature wheat straw was added at 0, 1485, 3267, and 5099 mg WEOC kg^?1. Increasing Ca²⁺ addition rate increased sorption of WEOC, particularly at the greatest concentration of WEOC added, and decreased desorption. This study confirmed the importance of Ca²⁺ in binding organic matter to clay and suggests that Ca²⁺ addition to clay-rich subsoils could be used to increase their organic C sequestration.     

Contribution of Soil Components on the Sorption of Chlorpyrifos

It is generally assumed that the sorption of a nonionic pesticide on soil depends mainly on the content of soil organic matter (SOM); however, there are other factors that can contribute to this process. The possible causes of variation in the carbon-normalized partition coefficient (K _OC) for chlorpyrifos (CPF) for a diverse set of ten soils have been investigated. On the one hand, the analysis of the chemical composition of the SOM was analyzed, and on the other hand, the likely interactions between the organic matter and the mineral phase were assessed. Sorption experiments of CPF were performed on whole soil, on soils treated with 2% hydrofluoric acid (HF), and onto calcined soil at 550 °C. Organic matter chemistry of soil was determined by ¹³C CP/MAS NMR spectroscopy; K _OC values were positively correlated with aryl C relative proportion and negatively correlated with alkyl C and O-aryl C proportions and prediction equation of K _OC was found (R ²?=?0.82, p?<?0.001). To evaluate possible organo-mineral interactions, a mathematical model was proposed which calculates the concentration of CPF at equilibrium (C _cal) considering adsorption coefficients for the organic (K _DHF) and inorganic (K _D550 °C) soil constituents, separately. The comparison between C _cal and the equilibrium concentration obtained from experimental data (C _exp) onto whole soil allowed us to confirm that interactions between the OM and clay affect the adsorption of CPF in whole soil. Such findings should be taken into account in the development of predictive models for the evaluation of the fate and transport of this pesticide in soil.     

Effect of Ionic Strength and Index Cation on the Sorption of Phenanthrene

Sorption characteristics of phenanthrene were studied in batch equilibrium experiments with 32 Australian soils that varied widely in physicochemical properties. Sorption of phenanthrene varied widely among the soils and was generally nonlinear, with the nonlinearity index (n) of the Freundlich isotherm varying from 0.62 to 1.01. Simple regression analyses revealed that total organic carbon (TOC) accounts for about 68 % of the variation in the partition coefficient (K′ _f ) for sorption among the soils at an equilibrium concentration (C _e ) of 0.05 mg/L. The organic carbon normalized distribution coefficient (K _OC ), varied considerably between soils with >70 % of the variance of logK _OC being accounted for by logTOC, clay and log dissolved organic carbon (DOC). These results show that the phenanthrene C _e is influenced by both TOC as well as the DOC in soil suspensions. The effects of ionic strength (IS) and index cation were investigated using four contrasting soils. Results show that with an increase in IS from 0.03 to 0.15 M sorption of phenanthrene generally increased in CaCl₂ background solutions, whereas the effect was less significant and variable in NaCl background solutions. Sorption of phenanthrene was slightly higher at low IS (0.03 M) with Na⁺ as index cation compared with that of Ca²⁺, whereas an opposite trend was observed at higher IS (0.15 M). For two soils high in TOC, the flocculation of endogenous DOC in the presence of Ca²⁺ reduced the influence of background electrolyte and resulted in a more linear sorption isotherm as well as higher sorption capacity. This trend was more significant with Ca²⁺ relative to Na⁺.     

Sorption and Fractionation of Copper in Soil at a Sewage Irrigation Farm in Australia

Abstract

Copper (Cu) is an important heavy metal to be considered in soil contamination, because high concentrations of copper in soil produce toxic effects and may accumulate in plant tissues. In Australia's oldest sewage irrigation farm, located in Werribee, Victoria, soil in the land filtration area is contaminated by Cu. However, Cu content in herbage tissues is in the normal range and has been trending downward since 1979. Therefore, studies on the sorption capacity and sequential extraction of Cu in soil at the Werribee Farm is of significance, not only for better understanding the mechanism of transport, chemical processes, and plant uptake of Cu, but also in providing information for the practical management of sewage farm soils. Methods of combining sorption isotherms with sequential extraction procedures were adopted, and the results showed that the soil in the land filtration area at Werribee Farm has a high sorption capacity for Cu, and distribution coefficients, K_f of Cu, were 629 L kg^?1 in surface soils (0–20 cm) and 335 L kg^?1 in subsurface soils (20–40 cm). The sequential extraction fractions demonstrate that exchangeable and carbonate fractions are very low, only comprising 3.49 to 5.49% of total copper. The other fractions are also discussed. This characteristic of Cu in soil is related to the low concentration of Cu in plant tissues.     

基于GIS的亚热带典型地区土壤有机碳空间分布预测

Spatial distribution of organic carbon in soils is difficult to estimate because of inherent spatial variability and insufficient data. A soil-landscape model for a region, based on 151 samples for parent material and topographic factors, was established using a GIS spatial analysis technique and a digital elevation model (DEM) to reveal spatial distribution characteristics of soil organic carbon (SOC). Correlations between organic carbon and topographic factors were analyzed and a regression model was established to predict SOC content. Results for surface soils (0-20 cm) showed that the average SOC content was 12.8 g kg^-1, with the SOC content between 6 and 12 g kg^-1 occupying the largest area and SOC over 24 g kg^-1 the smallest. Also, soils derived from phyllite were the highest in the SOC content and area, while soils developed on purple shale the lowest. Although parent material, elevation, and slope exposure were all significant topographic variables (P < 0.01), slope exposure had the highest correlation to SOC content (r = 0.66). Using a multiple regression model (R² = 0.611) and DEM (with a 30 m × 30 m grid), spatial distribution of SOC could be forecasted.     

2,4‐D Movement in Allophanic Soils from Two Contrasting Climatic Regions

Abstract

Allophanic top‐ and subsoils from the Mexican and Newzealand Central Volcanic Plateau, as well as a nonallophanic sandy loam soil, were sampled to study the impact of organic matter and allophane content on 2,4‐D fate. High sorption rates were found, especially in the two topsoils from Mexico and New Zealand, with distribution coefficient (K _d ) obtained from displacement experiments in packed columns equal to 7.61 and 8.43 L kg^?1 respectively. 2,4‐Dichlorophenoxyacetic acid transfer through the soil columns was found to be in chemical nonequilibrium and was well predicted using a two‐site sorption model. For the two allophanic top soils, K _d obtained from batch was very different to the K _d obtained from column experiments. Either the equilibrium could not be reached in batch or the two‐site model was not able to describe the wide range of sorption sites present in the highly reactive organic matter and allophane components.