A Molecular Ferromagnet with a Curie Temperature of 6.2 Kelvin: [Mn(C5(CH3)5)2]+[TCNQ]-

The study of magnetic phase transitions in insulating molecular solids provides new insights into mechanisms of magnetic coupling in the solid state and into critical phenomena associated with these transitions. Only a few such materials are known to display cooperative magnetic properties. The use of high-spin molecular components would enhance intermolecular spin-spin interactions and thus a series of chargetransfer (CT) salts have been synthesized that utilize the spin S = 1 molecular cation, [Mn(C(5)(CH(3))(5))(2)](+) (decamethylmanganocenium). The structure and cooperative magnetic behavior of [Mn(C(5)(CH(3))(5))(2)](+)[TCNQ(-) (decamethylmanganocenium 7,7,8,8-tetracyano-p-quinodimethanide) are reported. This salt is a bulk molecular ferromagnet with the highest critical (Curie) temperature (T(c) = 6.2 K) and coercive field (3.6 x 10(3) gauss), yet reported for such a material.     

Dinitrogen Cleavage by a Three-Coordinate Molybdenum(III) Complex

Cleavage of the relatively inert dinitrogen (N(2)) molecule, with its extremely strong N identical withN triple bond, has represented a major challenge to the development of N(2) chemistry. This report describes the reductive cleavage of N(2) to two nitrido (N(3-)) ligands in its reaction with Mo(NRAr)(3), where R is C(CD(3))(2)CH(3) and Ar is 3,5-C(6)H(3)(CH(3))(2'), a synthetic three-coordinate molybdenum(III) complex of known structure. The formation of an intermediate complex was observed spectroscopically, and its conversion (with N identical withN bond cleavage) to the nitrido molybdenum(VI) product N identical withMo(NRAr)(3) followed first-order kinetics at 30 degrees C. It is proposed that the cleavage reaction proceeds by way of an intermediate complex in which N(2) bridges two molybdenum centers.     

Dianion Stabilization by (M(C5(CH3)5)2)+: Theoretical Evidence for a Localized Ring in (DDQ)2-

Organic dianions have been stabilized by (M(C(5)(CH(3))(5))(2))(+), where M is iron or cobalt. This has allowed the structural and spectroscopic characterization of these dianions. The structure of (M(C(5)(CH(3))(5))(2))(2)(+) (DDQ)(2-), where DDQ is 2,3-dichloro-5,6-dicyanobenzoquinone, has been determined by x-ray crystallography. The structure of (DDQ)(2-)is consistent with ab initio molecular orbital calculations that suggest a localizd as opposed to a delocalized (aromatic) ring structure.     

Self-Assembly of n-Alkyl Thiols as Disulfides on Au(111)

A grazing incidence x-ray diffraction study of CH(3)(CH(2))(9)SH self-assembled on the (111) surface of gold revealed a disulfide head group structure, which provides a context in which to understand the structure and self-assembly process of this widely studied system. The structure consists of a nearly hexagonal two-dimensional arrangement of the hydrocarbon chains with a dimerization of the sulfur head groups (accommodated through a gauche bond), resulting in a S-S spacing of 2.2 angstroms. These results demonstrate the importance of internal molecular degrees of freedom in the templating of "soft" organic materials on inorganic substrates.     

A synthetic nickel electrocatalyst with a turnover frequency above 100,000 s⁻¹ for H₂ production

Reduction of acids to molecular hydrogen as a means of storing energy is catalyzed by platinum, but its low abundance and high cost are problematic. Precisely controlled delivery of protons is critical in hydrogenase enzymes in nature that catalyze hydrogen (H(2)) production using earth-abundant metals (iron and nickel). Here, we report that a synthetic nickel complex, [Ni(P(Ph)(2)N(Ph))(2)](BF(4))(2), (P(Ph)(2)N(Ph) = 1,3,6-triphenyl-1-aza-3,6-diphosphacycloheptane), catalyzes the production of H(2) using protonated dimethylformamide as the proton source, with turnover frequencies of 33,000 per second (s(-1)) in dry acetonitrile and 106,000 s(-1) in the presence of 1.2 M of water, at a potential of -1.13 volt (versus the ferrocenium/ferrocene couple). The mechanistic implications of these remarkably fast catalysts point to a key role of pendant amines that function as proton relays.     

A carbon-free sandwich complex [(P5)2Ti]2-

Reactions of highly reduced titanium complexes with white phosphorus, P4, at or below 25 degrees C yielded brown to deep red-brown salts of the first entirely inorganic metallocene, [(eta5-P5)2Ti](2-)(1). Like ferrocene and other carbon-based metallocenes, the structure of 1 has parallel and planar five-membered rings symmetrically positioned about the central metal atom. Despite its electron-deficient (16 electron) and formally zerovalent titanium character, salts of 1 are highly stable toward heat and air, both in solution and in the solid state. Computational studies show that the pentaphosphacyclopentadienyl unit, P5, functions as an unusually effective acceptor ligand, and this results in substantial stabilization of 1.     

Large first hyperpolarizabilities in push-pull polyenes by tuning of the bond length alternation and aromaticity

Conjugated organic compounds with 3-phenyl-5-isoxazolone or N,N'-diethylthiobarbituric acid acceptors have large first molecular hyperpolarizabilities (beta) in comparison with compounds with 4-nitrophenyl acceptors. For example, julolidinyl-(CH=CH)(3)-CH=N,N'- diethylthiobarbituric acid, which has 12 atoms between the donor and acceptor, has a beta(0) of 911 x 10(-30) electrostatic units, whereas (CH(3))(2)NC(6)H(4),-(CH=CH)(4)-C(6)H(4)NO(2), with 16 atoms between its donor and acceptor, has a beta(0) of 133 x 10(-30) electrostatic units. The design strategies demonstrated here have resulted in chromophores that when incorporated into poled-polymer electrooptic modulators exhibited significant enhancements in electrooptic coefficients relative to polymers containing the commonly used dye Disperse Red-1. Poled polymer devices based on these or related chromophores may ultimately lead to high-speed electrooptic switching elements with low drive-power requirements, suitable for telecommunications applications.     

Conducting Layered Organic-inorganic Halides Containing <110>-Oriented Perovskite Sheets

Single crystals of the layered organic-inorganic perovskites, [NH(2)C(I=NH(2)](2)(CH(3)NH(3))m SnmI3m+2, were prepared by an aqueous solution growth technique. In contrast to the recently discovered family, (C(4)H(9)NH(3))(2)(CH(3)NH(3))n-1SnnI3n+1, which consists of (100)-terminated perovskite layers, structure determination reveals an unusual structural class with sets of m <110>-oriented CH(3)NH(3)SnI(3) perovskite sheets separated by iodoformamidinium cations. Whereas the m = 2 compound is semiconducting with a band gap of 0.33 +/- 0.05 electron volt, increasing m leads to more metallic character. The ability to control perovskite sheet orientation through the choice of organic cation demonstrates the flexibility provided by organic-inorganic perovskites and adds an important handle for tailoring and understanding lower dimensional transport in layered perovskites.     

Structural aspects of reversible molecular oxygen uptake

The system IrX(CO)[P(C(6)H(5))(3)](2) in benzene solution adds mo lecular oxygen reversibly if X is chlorine and irreversibly if X is iodine. The crystal structure of the complex IrIO(2)(CO)[P(C(6)H(5))(3)](2) * CH(2)Cl(2) is reported here and compared with a previous study of the structure of IrClO(2)(CO)[P(C(6)H(5))(3)](2). The O-O bond length is 1.47 +/- 0.02 angstroms in the irreversibly oxygenated iodo-compound and 1.30 +/- 0.03 angstroms in the reversibly oxygenated chloro compound.     

Lanthanide complexes as nuclear magnetic resonance structural probes: paramagnetic anisotropy of shift reagent adducts

Magnetic anisotropy measurements on single crystals of a series of paramagnetic 8-coordinate lanthanide shift reagent adducts of the type Ln[(CH(3))(3)CCOCHCOC(CH(3))(3)(4-CH(3)C(5)H(1)N)(2) have been made for the following lanthanides: praseodymium, neodymium, samarium, europium, terbium, dysprosium, holmium, erbium, thulium, and ytterbium. The susceptibility tensors are highly anisotropic and nonaxial. Dipolar nuclear magnetic resonance shifts evaluated from the solid-state date are in satisfactory agreement with the solution results.     

Synthesis of inorganic fullerene-like molecules

The reaction of [Cp*Fe(eta5-P5)] with Cu(I)Cl in solvent mixtures of CH2Cl2/CH3CN leads to the formation of entirely inorganic fullerene-like molecules of the formula [[Cp*Fe(eta5:eta1:eta1:eta1:eta1:eta1-P5)]12[CuCl]10[Cu2Cl3]5[Cu(CH3CN)2]5] (1) possessing 90 inorganic core atoms. This compound represents a structural motif similar to that of C60: cyclo-P5 rings of [Cp*Fe(eta5-P5)] molecules are surrounded by six-membered P4Cu2 rings that result from the coordination of each of the phosphorus lone pairs to CuCl metal centers, which are further coordinated by P atoms of other cyclo-P5 rings. Thus, five- and six-membered rings alternate in a manner comparable to that observed in the fullerene molecules. The so-formed half shells are joined by [Cu2Cl3]- as well as by [Cu(CH3CN)2]+ units. The spherical body has an inside diameter of 1.25 nanometers and an outside diameter of 2.13 nanometers, which is about three times as large as that of C60.     

Open Framework Structures Based on Sex2- Fragments: Synthesis of (Ph4P)[M(Se6)2] (M = Ga, In, TI) in Molten (Ph4P)2Sex

Polychalcogenide compounds with open polymeric frameworks are rare, and they represent a class of compounds in which microporosity might be achieved. Microporous frameworks that are not oxide-based are now attracting interest because of the combination of catalytic and electronic properties they may simultaneously possess. Three new compounds that may be forerunners to such materials have been discovered and are reported here. The reaction of gallium (Ga), indium (In), and thallium (TI) metal with (Ph(4)P)(2)Se(5) (Ph, phenyl) and an excess of elemental selenium (Se) in a sealed, evacuated Pyrex tube at 200 degrees C yielded small red crystals of (Ph(4)P)[Ga(Se(6))(2)] (I), (Ph(4)P)[In(Se(6))(2)] (II), and (Ph(4)P)[TI(Se(6))(2)] (III), respectively. The [M(Se(6))(2)](-) (M = Ga, In, TI) ions form a two-dimensional, open framework filled with Ph(4)P(+) ions. The [M(Se(6))(2)](n)(n-) structure consists of tetrahedral M(3+) centers and bridging Se(6)(2-) ligands, leading to an extended structure in two dimensions. These layers stack perfectly one on top of the other giving rise to one-dimensional channels running down the c axis that are filled with Ph(4)P(+) cations. These cations are situated in the layers, as opposed to between the layers, and the whole structure can be viewed as a template. Compound II shows remarkable thermal stability and melts congruently at 242 degrees C. Upon cooling to room temperature it gives a glassy phase that recrystallizes upon subsequent heating to 160 degrees C.     

Catalytic hydration of terminal alkenes to primary alcohols

Direct catalytic hydration of terminal alkenes to primary alcohols would be an inexpensive route to industrially useful alcohols and a convenient synthetic route for the synthesis of terminal alcohols in general. The reaction between trans- PtHCl(PMe(3))(2) (where Me = CH(3)) and sodium hydroxide in a one-to-one mixture of water and 1-hexene yields a species that, at 60 degrees C and in the presence of the phasetransfer catalyst benzyltriethylammonium chloride, catalyzes selective hydration of 1-hexene to n-hexanol at a rate of 6.9 +/- 0.2 turnovers per hour. Hydration of 1-dodecene to n-dodecanol occurs at a rate of 8.3 +/- 0.4 turnovers per hour at 100 degrees C. Deuterium labeling experiments with trans-PtDCl(PMe(3))(2) show that hydration involves reductive elimination of a C-H bond. At low hydroxide concentrations (<8 equivalents), hydration of the water-soluble olefin 3-butene-1-ol to 1,4-butanediol exhibited a first-order dependence on hydroxide concentration for loss of catalytic activity. This suggests that hydroxide attacks the coordinated alkene slowly. At high hydroxide concentrations, the rate of catalysis was hydroxide-independent and first order in alkene. Substitution of coordinated water (k(1) = 9.3 +/- 0.5 x 10(-3) liters per mol per second) appears to be limitng under these conditions.     

Binuclear ion containing nitrogen as a bridging group

A binuclear ion ([NH(3))5RuN(2)Ru(NH(3))(5)](5)+ is formed by the direct reaction of N(2) with an aqueous solution of (NH(3))(5)RuOH(2)(2+) at room temperature. The binuclear ion is also formed by the reversible reaction of (NH(3))5RuOH(2)(2+) with (NH(3))(5)RuN(2)(2+). Solid [(NH(3))(5)RuN(2)Ru(NH(3))(5)] (BF(4))(4) has been prepared, and its ultraviolet and infrared spectra are reported.     

An Inorganic Double Helix: Hydrothermal Synthesis, Structure, and Magnetism of Chiral [(CH3)2NH2]K4[V10O10(H2O)2(OH)4(PO4)7]{middle dot}4H2O

Very complicated inorganic solids can be self-assembled from structurally simple precursors as illustrated by the hydrothermal synthesis of the vanadium phosphate, [(CH(3))(2)NH(2)]K(4)[V(10)O(10)(H(2)O)(2)(OH)(4)(PO(4))(7)].4H(2)O, 1, which contains chiral double helices formed from interpenetrating spirals of vanadium oxo pentamers bonded together by P(5+). These double helices are in turn intertwined with each other in a manner that generates unusual tunnels and cavities that are filled with (CH(3))(2)NH(2)(+) and K(+) cations, respectively. The unit cell contents of dark blue phosphate 1, which crystallizes in the enantiomorphic space group P4(3) with lattice constants a = 12.130 and c = 30.555 angstroms, are chiral; only one enantiomorph is present in a given crystal. Magnetization measurements show that 1 is paramagnetic with ten unpaired electrons per formula unit at higher temperatures and that antiferromagnetic interactions develop at lower temperatures.     

Decamethyldizincocene, a stable compound of Zn(I) with a Zn-Zn bond

Unlike mercury, which has an extensive +1 oxidation state chemistry, zinc usually adopts the +2 oxidation state. Decamethyldizincocene, Zn2(eta5-C5Me5)2, an organometallic compound of Zn(I) formally derived from the dimetallic [Zn-Zn]2+ unit, has been isolated from the low-temperature (-10 degrees C) reaction of Zn(C5Me5)2 and Zn(C2H5)2 in diethyl ether. X-ray studies show that it contains two eclipsed Zn(eta5-C5Me5) fragments with a Zn-Zn distance (+/- standard deviation) of 2.305(+/-3) angstroms, indicative of a metal-metal bonding interaction.     

Manipulation of the wettability of surfaces on the 0.1- to 1 -micrometer scale through micromachining and molecular self-assembly

Micromachining allows the formation of micrometer-sized regions of bare gold on the surface of a gold film supporting a self-assembled monolayer (SAM) of alkanethiolate. A second SAM forms on the micromachined surfaces when the entire system-the remaining undisturbed gold-supported SAM and the micromachined features of bare gold-is exposed to a solution of dialkyl disulfide. By preparing an initial hydrophilic SAM from HS(CH(2))(15)COOH, micromachining features into this SAM, and covering these features with a hydrophobic SAM formed from [CH(3)(CH(2))(11)S](2), it is possible to construct micrometer-scale hydrophobic lines in a hydrophilic surface. These lines provide new structures with which to manipulate the shapes of liquid drops.     

A Synchrotron X-ray Study of a Solid-Solid Phase Transition in a Two-Dimensional Crystal

A measurement and interpretation on a molecular level of a phase transition in an ordered Langmuir monolayer is reported. The diagram of surface pressure (pi) versus molecular area of a monolayer of chiral (S)-[CF(3)-(CF(2))(9)-(CH(2))(2)-OCO-CH(2)-CH (NH(3)(+))CO(2)(-)] over water shows a change in slope at about pi(s)= 25 millinewtons per meter. Grazing-incidence x-ray diffraction and specular reflectivity measurements indicate a solid-solid phase transition at pi(s). The diffraction pattren at low pressures reveals two diffraction peaks of equal intensities, with lattice spacings d of 5.11 and 5.00 angstroms; these coalesce for pi >/=pi(s). Structural models that fit the diffraction data show that at pi> pi(s) the molecules pack in a two-dimensional crystal with the molecules aligned vertically. At pi < pi(s) there is a molecular tilt of 16 degrees +/- 7 degrees . Independent x-ray reflectivity data yield a tilt of 26 degrees +/- 7 degrees . Concomitant with the tilt, the diffraction data indicate a transition from a hexagonal to a distorted-hexagonal lattice. The hexagonal arrangement is favored because the -(CF(2))(9)CF(3) moiety adopts a helical conformation. Compression to 70 millinewtons per meter yields a unit cell with increased crystallinity and a coherence length exceeding 1000 angstroms.     

Measurement of the distribution of site enhancements in surface-enhanced Raman scattering

On nanotextured noble-metal surfaces, surface-enhanced Raman scattering (SERS) is observed, where Raman scattering is enhanced by a factor, G, that is frequently about one million, but underlying the factor G is a broad distribution of local enhancement factors, eta. We have measured this distribution for benzenethiolate molecules on a 330-nanometer silver-coated nanosphere lattice using incident light of wavelength 532 nanometers. A series of laser pulses with increasing electric fields burned away molecules at sites with progressively decreasing electromagnetic enhancement factors. The enhancement distribution P(eta)deta was found to be a power law proportional to (eta)(-1.75), with minimum and maximum values of 2.8 x 10(4) and 4.1 x 10(10), respectively. The hottest sites (eta >10(9)) account for just 63 in 1,000,000 of the total but contribute 24% to the overall SERS intensity.     

Metal oxide chemistry in solution: the early transition metal polyoxoanions

Many of the early transition elements form large polynuclear metal-oxygen anions containing up to 200 atoms or more. Although these polyoxoanions have been investigated for more than a century, detailed studies of structure and reactivity were not possible until the development of modern x-ray crystallographic and nuclear magnetic resonance spectroscopic techniques. Systematic studies of small polyoxoanions in inert, aprotic solvents have clarified many of the principles governing their structure and reactivity, and also have made possible the preparation of entirely new types of covalent derivatives such as CH(2)Mo(4)O(15)H(3-), C(5)H(5)TiMo(5)O(18)(3-), and (OC)(3)Mn(Nb(2)W(4)O(19))(3-). Since most early transition metal polyoxoanions have structures based on close-packed oxygen arrays containing interstitial metal centers, their chemistry offers a rare opportunity to study chemical transformations in detail on well-defined metal oxide surfaces.