Selection Among Early Generation Peanut Progeny for High and Low Acetylene Reduction and Plant Weight*

Selection of superior host genotypes in symbiosis with native Bradyrhizobium has been suggested as a means of increasing nitrogen fixation m peanut (Arachis hypogaea L.). In this study progeny from a cross of cultivars ‘Florigiant’ and ‘Florunner’ inter-mated twice and selected for yield formed the base population. The 44 selected S_2,1 families, ‘Florigiant’ and ‘Florunner’ were evaluated at two sampling dates at each of two locations for traits indicative of nitrogen fixation. Five families were selected in each of four selection groups — high and low acetylene reduction and high and low plant weight. Selected families were retested in a second year and inter-mated. S_2,1 progeny within each selection group were bulked and evaluated for nitrogen-if using characteristics at two ‘sampling dates at two locations. After intermating, the mean of the high acetylene reduction group, 62.9 μ/moles C₂H₄/plant hr, was Significantly greater than the mean of the low acetylene reduction group, 52.5 μmoles C₂H₄/plant/hr, and of the mid-parent, 55.8 μ/moles C₂H₄/plant/hr. The associated estimate of realised heritability was 55 ± 08 indicating the response to selection was approximately halt the selection differential and that the distinction between families selected for high and low acetylene redaction was maintained after intermating. However, the realized heritability estimate obtained from the means of the base population and the selected families inbred one generation was .14 ± .06 indicating a failure to maintain distinct groups after one generation of inbreeding. The utility of early generation selection for enhanced N: fixation is, therefore, doubtful in this population. Selection based on plant weight was not effective. A significant difference in the plant weight means of the high and low plant weight groups was not detected when selections were retested or after inter-mating. Plant weight was not a useful indirect selection criterion for enhanced N₂ fixation.     

Tetraploid Westerwolths ryegrass

Summary Germinated seeds of the annual Westerwolths ryegrass were treated with colchicine-solutions of 0.05 to 0.4% at a temperature of 29°C in order to obtain autotetraploids. The best results were obtained after treatment for 2 hours with 0.1 and 0.2% solutions or 4 hours with 0.05%. By these procedures about 8% of the treated seeds produced mixoploid or tetraploid mature plants. A preliminary progeny test was performed with seed of outstanding C₁-plants.In spaced plants and in drilled rows the dry matter production of these C₂-families was on average equally as high as that of the most productive original diploid variety. The proportion of leaves was higher in both the first and in the second cut, while drought resistance was considerably better. The tetraploids came later into ear, tillering ability was smaller and mildew attack was slightly heavier. In samples from drilled and from space-planted rows seed production per inflorescence was found to be higher in the tetraploids than in the diploids. The seed of the tetraploids was larger.From the data available it is concluded that chromosome doubling offers favourable possibilities for the improvement of Westerwolths ryegrass. Some suggestions for a breeding programme are given.     

Selection for Seed Yield Production of Egyptian Clover (Trifolium alexandrinum L.) C. V. Fahl

Modified mass and family selection for seed yield production of berseem clover (Trifolium alexandrinum L.) c.v. ‘Fahl’ were applied for two generations. Two hundred plants (5 % intensity of selection) were selected for seed yield in the first season, 1985/86. In the second season, 1986/87, selection between and within half-sib families was practiced. In addition, equal parts of seeds from each of the 200 selected plants were bulked to form the C₁ modified mass selection; after establishing, the same procedure was adopted to form the C₂ generation. The cycles 1 and 2 of half-sib families and modified mass selection along with the base population family were evaluated for forage and seed yields. The realized gains from modified mass selection were 6.03 and 9.51 % for fresh forage yield, 5.57 and 10.86 % for protein yield and 13.23 and 16.19 % for seed yield in cycles 1 and 2, respectively, over the base population. The realized gain from family selection in cycle 2 as a percentage of the base population mean amounted to 11.32, 13.35, 17.47 and 3.15% for forage, protein, and seed yield and seed index, respectively. The broad sense heritability, as estimated from the variance components was 89.63, 63.03, and 76.67 % for dry forage, seed yield and seed index, respectively. Although, all these five traits (fresh, dry, protein, and seed yield and seed index) had positive correlation with each other, weak correlations were found between seed yield and forage yields. Furthermore, close associations were found among forage yield traits.     

Response to selective pressure in early generation progenies of upland cotton (Gossypium hirsutum L.)

Summary Combining high fiber strength with high yield in upland cotton (Gossipium hirsutum L.) was been difficult. The cross combination, 69–120 × 6M-10, was chosen for this study because of the divergence of parents for fiber strength, seeds per boll and crop maturity. Forty F₂ plants were selected in 1974 solely on the basis of visual yield and 20 plants were randomly chosen to serve as a bulk check. The F₃ progenies, the bulk check, the parents and a commercial check were tested in 1975. From these results, five groups were established, consisting of four (10%) progenies each to represent high seed/boll, low seeds/boll, high fiber strength, low fiber strength and high yield in the 1976 test of F₄ progenies. This experiment was conducted to (a) compare the contributions of yield components to lint yield among groups of early generation progenies (F₃ and F₄) and (b) determine the phenotypic correlations between yield and quality attributes. The yield components, bolls/m², seeds/boll, fibers/seed, mean fiber length and micronaire, were included as well as fiber strength.No significant lint yield differences were found among the five groups. Progenies within groups did, however, differ in lint yield. The low and high seeds boll groups gave similar yield and fiber quality results. The low and high fiber strength groups gave similar yield but longer fiber was obtained with the high strength group.Stepwise regression analyses estimates show that the number of bolls produced per unit area, although the major contributor to lint yield for all groups, contributed only 66.9% of the total variation in the progeny group selected for high yield, with fibers/seed, mean fiber length, micronaire and seeds/boll accounting for 13.2%, 8.1%, 6.0%, and 5.8%, respectively. Correlations between the various yield components and fiber strength were low and mainly insignificant, indicating that minor alterations might be made in later generations without serious consequences.Potential gains from second-stage selective pressure upon yield-per-boll components following initial selection for lint yield are discussed.     

Hybridization, Through Culture of Embryos and Immature Seeds, of a Range of Tomato Cultivars with a Tomato Somatic Hybrid [Lycopersicon esculentum (+) L. peruvianum]: Emergence of a Possible New Marker Gene for Tomato Breeding

Two hexaploid somatic hybrids [Sh; L. esculentum (+) L. Peruvianum] accessions 6 and 18 were back-crossed with two diploid L. Esculentum cultivars ‘Moneymaker’ (mm) and ‘pusa Ruby’ (pr). Twenty-two plants of the bc2 generation were produced by backcrossing 7 bcl plants (mm x sh, 6, 18) with five tomato cultivars. Fourteen of the bc2 plants were self-fertile, five produced anther cones with anthocyanin pigmentation not present in the parents. A bc3 generation was developed by crossing the four cultivars as female parent with three bc2 generation plants. The bc3 progeny derived from one pollen parent plant were produced without the need to culture immature seeds. They segregated with respect to pigmented anther cones and were self-fertile. The anther cone pigmentation of the pollen parent plant was associated with increased seed set, greater fruit size and an orange-red fruit colour. These features were transmitted to the fertile bc3 generation. Conversely, bc3 offspring involving the other two parent plants were only recovered by culture of immature seeds. The recovery of diploid plants in BCl and self-fertility in BC2 resulted in almost total recovery of the tomato cultivar characteristics (fruit size, colour and number of seeds) by BC3.     

Prospects for the Development of Rapeseed (B. napus L.) with Improved Linoleic and Linolenic Acid Content

The special aspects of the Western Australian rape-seed breeding programme for the improvement of C₁₈ fatty acids (FA) have been highlighted. Progress made through the use of ‘Oro’-mutant and IXLIN (interspecific X derived) as sources of genes fur improved C₁₈ FA is discussed. These two donor lines were crossed or intercrossed with high yielding, disease resistant B. napus lines (summer and winter type) or their early generation progenies from interspecific crosses with B. juncea or B. carinata. Tins provided suitable genetic diversity and favourable agronomic background for the introgression of target genes or gene system for improved C₁₈ fatty acids. Many of the polyenoic lines selected from these crosses have indicated scope for combining high linoleic and low linolenic acid levels, with maintenance of good growths and seed development in plants well adapted to the environment.     

Direct and indirect selection for yield in chickpea

Summary The efficiency of indirect selection for seed yield was compared with direct selection for yield per se in chickpea. A total of 2500 single F₂ plants, derived from 50 crosses with 50 plants from each cross, were divided into five sub-populations (SP1 to SP5) of 500 plants each by including 10 plants from each of the 50 crosses. The five sub-populations were advanced upto F₆ by exercising 10% selection intensity for four successive generations for number of pods per plant in SP1, number of seeds per pod in SP2, seed weight in SP3, seed yield in SP4 and random selection in SP5. The efficiency of direct and indirect selection for yield was evaluated by comparing groups of 50 F₆ lines from each sub-population. SP1 and SP3 F₆ lines showed higher mean grain yield than the other three methods. SP1 and SP3 were found to be almost equally efficient in developing F₆ lines which were significantly superior to the check. This suggests that indirect selection for yield via pod number and seed weight is more efficient than direct selection for yield.     

Effects of Wheat Chromosome 1D Telosomes on Hybrid Seed Development in Wheat × Rye Crosses

Pollination of ‘Chinese Spring,’ monosome 1D plants with rye results in failure of hybrid seed development in a proportion of the F₁ seeds corresponding to the transmission rate of the nullisomic 1D egg cells. Development and viability of these hybrid seeds closely resemble that normally observed in T. aurum× rye crosses. Using ‘Chinese Spring’ chromosome ID telosomic plants in crosses with rye, it was possible to illustrate that the observed effect was associated with the long arm of this chromosome.     

Effectiveness of early generation selection under two plant densities in faba bean (Vicia faba L.)

The effectiveness of early generation selection under low and high plant density was evaluated in faba bean (Vicia faba L.). For this, the faba bean cv. 'Polycarpe' was pollinated by eight higher yielding cultivars of different origin. The F₁'s and F₂'s together with 'Polycarpe' and the pollinator with the highest yielding ability (cv. 'Effe') were evaluated under high plant density with adjacent controls and under low plant density in a honeycomb design. It was found that the eight hybrids had a different ranking at low than at high plant density for both generations (F₁and F₂). Hybrid Pol.x A-58 had the best combined yield performance in the F₁and F₂under high and hybrid Pol.x A-37 under low plant density. Application of individual plant selection in the F₂and F₃generation of the two crosses (Pol.x A-58 and Pol.x A-37), under both low plant density according to UNR-O honeycomb design and high plant density using a moving average, resulted in the selection of four groups with 20 selected F₃plants each. Within each group, equal numbers of seeds from each plant were mixed to establish four mixtures. These mixtures together with two controls ('Polycarpe' and 'Effe') were evaluated in a randomized complete block design (22 plants/m²) in one location for two years. It was found that the material selected continuously under low plant density had a significantly higher yield than the material selected under high plant density. In addition, the material selected from Pol.x A-37 (H₁R₂) under high plant density had a lower mean yield than that selected continuously under low plant density (H₁H₂). Their average yield over years was significantly higher than the yield of the material selected from Pol.x A-58 under both plant densities. Furthermore, the material selected from Pol.x A-58 under low plant density, had a significantly higher mean yield over years than its sibs selected under high plant density. It was concluded that honeycomb selection at low plant density can be used effectively for early generation selection in faba bean.     

Insect-mediated cross-pollination in soybean [Glycine max (L.) Merrill]: II. Phenotypic recurrent selection

Recurrent selection is a method for population improvement which has been used in soybean [Glycine max (L.) Merrill] to modify traits such as grain yield, seed-protein content, seed-oil content, tolerance to iron-deficiency chlorosis, and seed size. Nuclear male-sterility with insect-mediated cross-pollination has been successfully used in recurrent selection schemes in soybean. However, little attention has been given to selection to increase the agronomic performance of male-sterile plants per se. The objective of this study was to evaluate the response of male-sterile lines segregating for male-sterile alleles ms2, ms3, ms6, ms8, and ms9 to phenotypic recurrent selection for increased seed-set after 3 cycles, using a selected group of male parents. Bees halictidae, anthophoridae, andrenidae, and megachilidae were utilized as the pollinator vector. The results indicated that recurrent selection in a favorable environment was successful to increase the number of seeds per male-sterile plant. Although a differential response was observed among populations, the seed-set observed would justify the use of some specific male-sterile selections as female parents in a hybrid soybean seed production system.     

EMS诱发大豆不同品种M2代与M3代农艺性状变异比较

为了明确甲基磺酸乙酯(EMS)对大豆品种诱变的后代变异情况,利用0.5% EMS溶液处理4个大豆品种种子,对M2、M3代主要农艺性状的遗传变异进行分析比较。结果表明：各世代农艺性状均发生一定程度的变异,与M2代相比,M3代株高、分枝数、单株粒数、单株粒重及百粒重的平均变异系数变小,而主茎节数的平均变异系数变大,单株荚数的变异系数大致相当,然而这种趋势在各品种间却不尽相同;各世代都诱变出早熟或晚熟的变异株,各品种总熟期变异率由高到低M2代为‘黑河43’(0.71%)>‘北豆5’(0.63%)>‘合丰50’(0.57%)>‘合丰55’(0.53%),M3代为‘北豆5’(0.64%)>‘黑河43’(0.5%)>‘合丰55’(0.25%)>‘合丰50’(0.22%),说明熟期的变异至M3已下降。     

DNA marker-assisted selection to pyramid rust resistance genes in “carioca” seeded common bean lines

This work reports a gene pyramiding approach assisted by DNA markers used to develop “carioca” seeded common bean (Phaseolus vulgaris L.) elite lines harboring three different rust resistance genes. Rust is among the most destructive diseases that attack P. vulgaris and cause serious damage worldwide. The rust resistance genes Ur-5 (from ‘Mexico 309’), Ur-11 (from ‘BelMiDak RR-3’), and Ur-14 (from ‘BRS Pioneiro’, a “carioca” seeded cultivar derived from the resistance source ‘Ouro Negro’) were combined in the “carioca” seeded bean cultivar ‘Rudá’. Firstly, two different backcross programs were conducted separately to produce progenies harboring individually the Ur-5 and Ur-11 genes. Molecular fingerprinting analysis was used to select plants genetically similar to ‘Rudá’ in the backcross cycles to accelerate the recurrent-background recovery. The obtained progenies were initially intercrossed and then crossed with ‘BRSMG Pioneiro’ (Ur-14). The final F₁ plants derived from these crosses were screened with DNA markers linked to the three rust resistance genes: SI19 (Ur-5), SAE19 (Ur-11) and OPX11 (Ur-14). The plants selected as harboring all the alleles of interest were used to obtain the next generations. The selection based on DNA markers was conducted up to the F_4:5 generation. We were able to select F_4:7 progenies showing all the DNA markers associated to the genes of interest and resistant to all specific races of U. appendiculatus used for phenotypically detecting each one of the rust resistance genes. Yield evaluations show that these selected lines are as productive as the recurrent parent ‘Rudá’ and high-performing control cultivars grown in Brazil.     

Inheritance of threshability in synthetic hexaploid (Triticum turgidum×T. tauschii) by T. aestivum crosses

Triticum tauschii provides breeders with a valuable source of resistance and tolerance genes. Elucidation of the inheritance of traits in this species that hinder its use in breeding programmes is therefore of interest to wheat breeders. Inheritance of threshability was investigated in the crosses of four non-free-threshing (NFT) synthetic hexaploids (Triticum turgidum×T. tauschii) and two free-threshing (FT) T. aestivum cultivars during four crop seasons over 3 years at E1 Batan and Ciudad Obregon, Mexico. The parents, their F₁ Hybrids and individual F₂ plant-derived F₃ progenies of the crosses revealed that ‘Altar 84’/T. tauschii (219), ‘Chen’/T. tauschii (205), ‘Chen’/T. tauschii (224), and ‘Duergand’/T. tauschii (214) have independently segregating loci with two dominant alleles controlling threshability. Intercrosses among the synthetics, except ‘Altar 84’/T. tauschii (219), showed the genes to be allelic to each other. The cross between the FT cultivars showed no segregation in the F₃ generation, indicating common recessive genes. Based on these findings, population sizes of the synthetic-derived breeding materials should be increased to improve the chances of selecting FT desirable plants in the programme.     

Development of Bruchid-Resistant Mungbean Line Using Wild Mungbean Germplasm in Thailand

A mungbean (V. radiata) line (BC₃F₃ generation) which is resistant to two species of bruchid beetles (Callosobruchus chinensis and C. maculatus) was successfully developed in Thailand using a wild mungbean variety (V. radiata var. sublobata). One accession (TC1966) of wild mungbean was found to be completely resistant to C. chinensis and C. maculatus occurring at Chainat Field Crops Research Center in Thailand. The resistance was controlled by a single dominant gene (R). A breeding program to develop a bruchid-resistant mungbean cultivar with good agronomic characters under the environmental conditions of Thailand was initiated in 1987.‘Chainat 60’ (‘CN60’), a recommended mungbean cultivar in Thailand, was crossed with TC1966 to incorporate the resistance gene. Agronomic characters of the hybrids were improved by recurrent backcrossing using ‘CN60’ as a pollen parent. Seed yield per plant, days to flowering, and seed size of the bruchid-resistant BC₃F₂ population reached the level of ‘CN60’ after three consecutive backcrossings. Bruchid-resistant line (BC₃F₃, R/R) was selected from individual BC₃F₂ plants.     

Identification and inheritance of a partially dominant gene for yellow seed colour in Brassica napus

A yellow‐seeded doubled haploid (DH) line no. 2127‐17, derived from a resynthesized Brassica napus L., was crossed with two black‐seeded Brassica cultivars ‘Quantum’ and ‘Sprint’ of spring type. The inheritance of seed colour was investigated in the F₂, and BC1 populations of the two crosses and also in the DH population derived from the F1 of the cross ‘Quantum’× no. 2127‐17. Seed colour analysis was performed with the colorimeter CR‐300 (Minolta, Japan) together with a visual classification system. The immediate F1 seeds of the reciprocals in the two crosses had the same colour as the self‐pollinated seeds of the respective black‐ and yellow‐seeded female parents, indicating the maternal control of seed colour. The F1 plants produced yellow‐brown seeds that were darker in colour than the seeds of no. 2127‐17, indicating the partial dominance of yellow seed over black. In the segregating BC1 progenies of the two crosses, the frequencies of the black‐ and yellow‐seeded plants fit well with a 1 : 1 ratio. In the cross with ‘Quantum’, the frequencies of yellow‐seeded and black‐seeded plants fit with a 13 : 3 ratio in the F₂ progeny, and with a 3 : 1 ratio in the DH progeny. However, a 49 : 15 segregation ratio was observed for the yellow‐seeded and black‐seeded plants in the F₂ progeny of the cross with ‘Sprint’. It was postulated from these results that seed colour was controlled by three pairs of genes. A dominant yellow‐seeded gene (Y) was identified in no. 2127‐17 that had epistatic effects on the two independent dominant black‐seeded genes (B and C), thereby inhibiting the biosynthesis of seed coat pigments.     

Field evaluation and selection of rice somaclonal variants at different altitudes

A field experiment was designed to compare control with tissue culture-derived plants of rice, and to study the effects of natural selection pressure applied to the first generation (R0) of in vitro plants on the performance of their progeny. Control- and R0 in vitro plants of four rice varieties from middle altitude in Burundi, i.e. Facagro 57′, Facagro 76′, ‘Kirundo 3’ and ‘Kirundo 9’, were cultivated at four different altitudes (800, 1380, 1650 and 1900 m). Several parameters concerning tillering capacity, plant height development and seed production were measured. The means for most measured parameters were higher in control plants than in the in vitro plants, while the higher variation coefficients and most extreme values were usually found in the in vitro plants. For each variety, the 20 control plants and 20 in vitro plants having the highest production were selected at each altitude of 1380 and 1650 m, and their progenies were cultivated on the same site at 1580 m. Among the plants arising from 1650 m, most maximum values, higher variation coefficients and, in some cases, higher means were found in the in vitro plants. In contrast, among the plants arising from 1380 m, higher means most usually corresponded to control plants, while the tendency for maximum values and variation coefficients were unclear. These results indicate the positive effect of natural selection pressure applied in the first generation to plants rising from tissue culture. They also demonstrate that considerable variation may be generated in vitro. The interest for plant breeding purposes is discussed.     

Radiation and genetical studies to estimate the number of embryonic initials taking part in the formation of the shoot meristem of Vicia ervilia and Lathyrus sativus

Summary Dry seeds of V. ervilia and L. sativus were irradiated with 60Co gamma rays. The M₁ plants were grown to maturity. During harvest, ten randomly selected plants were arbitrarily numbered (symbols P₁ to P₁₀) and the branches and the pod positions along each branch of each plant were numbered (symbols for branches, B₁ to B₄ and pod positions, p₁ to p₁) from the lowest to the topmost one. The seeds of each pod position were collected, threshed, counted and, the next year, sown separately. Mutants were isolated from among the M₂ population and each mutant could be traced back to the particular topography of the M₁ plant. The seeds from the M₂ plants originating from different sectors of the M₁ plants were grown to M₃ generation to study the pattern of inheritance. The segregation data of L. sativus show that in some cases at least one and in other cases at least two embryonic initials were involved in the formation of the shoot meristem whereas in V. ervilia the number of embryonic initials involved was at least two or three.     

Introduction of aromatic fragrance into cultivated tomato from the peruvianum complex'

This study was performed to introduce the distinct aromatic fragrance of Lycopersicon peruvianum LA 1554 into the cultivated tomato, Lycopersicon esculentum. The strong breeding barriers existing between these two distantly related species were circumvented by the ovule selection and culture method. A large BC₁F₁ population was developed and among 127 plants, 36 were self‐compatible and yielded fruits. Fruits of some of these selected plants were found to be enriched with a sweet aromatic flavour. Sensory evaluation of the fruit aroma of these selected plants was performed by a panel of 12 members against one of the best consumer‐rated Japanese commercial tomato cultivars, ‘Momotaro’. Although extensive variation was observed in fruit‐aroma in the BC₁F₁ population, panel opinion on ‘flavour‐desirability’ significantly favoured the BC₁F₁ fruits of some selected plants over the cv. ‘Momotaro’. Therefore, it can be concluded that the aromatic fragrance of a ‘L. peruvianum’ accession has successfully been introduced into the cultivated tomato gene pool.     

Genetic response to index selection for grain yield, kernel weight and per cent protein in four wheat crosses

Quantitative genetic theory was used to investigate selection differentials, expected and observed direct and correlated responses to simultaneous improvement of grain yield, kernel weight, and grain protein content in F₃ and F₄ populations of four spring wheat (Triticum aestivum L.) crosses. Selection in the F₃ generation based on the Smith-Hazel index (SH) and yield was found to be superior to the other methods studied in identifying high-yielding lines, but resulted in substantial decrease in grain protein level. Consequently, a 1.0% increase in protein from selection for protein depressed grain yield as much as 536 kg/ha below the population mean, reducing the expected yield gains per generation selection cycle by 250%. The weight-free indices (EW), particularly the index involving only yield and kernel weight (EW3) and its linear approximation (EW4), and the desired gains indices were effective in improving protein content but were less efficient in selecting top-yielding lines. Selection in the opposite direction using truncation of the lowest 10% of the population based on weight-free-index involving yield, kernel weight and protein (EW2) reduced all traits significantly compared with the mean of the unselected population indicating the effectiveness of the unweighted selection index. The observed genetic gains (Ra) from selection based on yield, the SH, EW3 and EW4 indices were slightly lower than the expected advances per cycle (R) in populations from crosses ‘Sinton’בGlenlea’ (C1), ‘Glenlea’בNB505’ (C2), and ‘A2P5’בNB320’ (C6) (Ra/R = 70 to 85%) but were higher in cross ‘NB505’בA2P5’ (C5) (Ra/R = 126 to 143%). It was concluded that weight-free and the desired gains indices can be used to improve wheat grain yield and grain protein simultaneously in F₃ generation selection, as revealed by response to selection measured in the F₄ generation.     

Autotetraploidy in caraway (Carum carvi L.) for the increase of the aetheric oil content of the seed

Summary An autotetraploid population of caraway (Carum carvi L.) was produced by treating the growing points of young plants with a 0.2% colchicine solution. Selection on morphology, pollen size and pollen shape, followed by a selection on seed size proved to be an effective way to identify the mixoploid C₀ plants. Three percent of the treated plants produced a tetraploid progeny. Moderate selection in the C₁ and the C₂ population resulted in an improvement of the average seed-set to the amount of 50% of the diploid control, with a range of 21–78%. The 1000-kernel weight of the tetraploid material was 7 g, compared to 3 g in the diploid control. The oil content of the autotetraploid seed was increased with 35.6%; the increase in carvone amounted to 6.9%. The results of the experiment indicate that breeding work in autotetraploid caraway may result in a new cultivar.