Mangrove forest productivity and biomass accumulation in Hinchinbrook Channel,Australia

Data on stand structure and rates of photosynthesis were used to estimate net canopy carbon fixation and carbon accumulation as living biomass in mangrove forests in Hinchinbrook Channel, Australia. Total annual canopy net carbon fixation was estimated to be about 29tCha–1yr–1. This equates to about 204,000tCyr–1 for all mangrove forests in Hinchinbrook Channel. Of this, only about 12% was stored as living plant biomass. Although it is not yet possible to present a robust carbon balance for mangrove trees, the remainder is presumably lost through plant respiration, litter fall, root turnover and exudation of organic compounds from roots.     

Estimated stocks of organic carbon in mangrove roots and sediments in Hinchinbrook Channel,Australia

Aboveground and belowground root biomasses (Babove and Broot) were measured for young, isolated Rhizophorastylosa on Iriomote Island, Japan. The relationship between these two parameters was significant and given as the equation, Broot(g dry weight) = 0.394 × Babove(g dry weight) – 485 (r = 0.986). Multiple regression analyses also revealed good correlation between diameter and biomass of prop roots (Dprop and Bprop) and between prop root and root biomasses. Consequently, root biomass could be estimated from the measurements of diameter and biomass of prop roots using the multiple regression equation, Broot(g dry weight) = 80.0 ×Dprop(cm) + 0.86 ×Bprop (g dry weight) – 251. The relationship between DBH (diameter at breast height) and prop root biomass was also adequately described using an allometric equation.In Hinchinbrook Channel, Australia, redox potential (measured as Eh) and organic carbon stocks in the top 5cm of mangrove sediments were measured along a 600m transect from the frequently inundated, Rhizophora dominated zone on the creek edge, towards higher grounds, where Ceriops spp. became increasingly dominant. Eh values were about –60mV near the creek edge and increased to 260mV on higher grounds. Organic carbon stocks showed an opposite trend to Eh, with the values decreasing from about 360tCha–1 to 160tCha–1. At 18 sites, representing six different habitats, organic carbon stocks were also measured along with the DBH of mangrove trees. DBH was converted into aboveground biomass and then into root biomass using the equations obtained in the study on Iriomote Island. The average organic carbon stocks in the top 50 cm of sediments, aboveground biomass and root biomass were 296tCha–1, 123 tCha–1 and 52 tCha–1, respectively, and accounted for 64%, 25% and 11% of the total organic carbon stock.     

Mangrove structure,litter and macroalgal productivity in a northern‐most forest of Florida

Rhizophora mangle L. dominated 10 overwash islands within Tampa Bay forming the northernmost mangrove forests on the west coast of Florida. The mean number of trees and basal area were 5040 trees ha^-1 and 20.5m²ha^-1, respectively. Basal areas ranged from 1.1 (Avicennia germinans (L.) Stern), to 2.6m²ha^-1 (Laguncularia racemosa Gaertner), to 16.8 (R. mangle). Cockroach Bay mangroves are small (5.8–7.0m tall) versus coastal forests of south Florida and the Caribbean. Total litter production for a 12 month period was maximal in September for fringing (7.4gdwtm^-2d^-1) and interior (8.7gdwtm^-2d^-1) areas with the two zones not being significantly different. Average litter fall (3.1gdwtm^-2d^-1) was similar to more tropical Caribbean mangals. Leaves accounted for 68 of the litter and reproductive material for 6, being similar to tropical riverine and overwash marine angiosperm communities on the Mexican coast. Although mangrove forests in Tampa Bay are small in stature and experience cold damage and occasional frosts, their litter fall is similar in biomass to that of more tropical mangals. However, their reproductive output is low based on litter fall versus more tropical mangals suggesting that the northern extension is less than optimum. Macroalgal diversity was low (10 species) as compared to Caribbean mangals. Macroalgal turf (0.8gCm^-2d^-1) and epiphyte communities of A.germinans pneumatophores (2.7gCm^-2d^-1) have productivity levels that are equal to or greater than those of Caribbean mangals.     

In vitro propagation of <Emphasis Type="Italic">Oroxylum indicum</Emphasis> Vent. a medicinally important forest tree

In vitro propagation of Oroxylum indicum Vent. was carried out using cotyledonary node explants. Among the different types of cytokinins used for culture establishment, 6-benzyladenine exhibited the best response with higher concentrations (8.87µM or above) for inducing multiple shoots. Inclusion of indole-3-acetic acid (2.85µM) into 6-benzyladenine-supplemented medium triggered a high frequency of response as well as a proliferation of shoots. The best medium for proliferation was Murashige-Skoog (MS) medium with 6-benzyladenine (8.87µM) and indole-3-acetic acid (2.85µM). However, incorporation of gibberellic acid (1.44µM) was mandatory to enhance shoot elongation. Repeated subculturing of cotyledonary node and in vitro developed nodal segments in MS medium with 6-benzyladenine (4.44µM) at 4-week intervals resulted in continuous mass multiplication of shoots without any evidence of decline. Root induction was best (91.6%) when MS strength was reduced to one-quarter and combined with -naphthalene acetic acid (2.69µM) and indole-3-acetic acid (5.71µM), with a high survival rate (70–72%) of plantlets hardened in either soil rite or soil:sand:soil rite (1:1:2).     

Effects of a nursery CO2 enriched atmosphere on the germination and seedling morphology of two Mediterranean oaks with contrasting leaf habit

The use of an enriched CO₂ atmosphere in tree nurseries has been envisaged as a promising technique to increase productivity and to obtain seedlings with a higher root/shoot ratio, an essential trait to respond to water stress in Mediterranean-type ecosystems. In that framework, we have analyzed the effects of three levels of atmospheric CO₂ concentration (350, 500 and 700ppm) on the germination rate, growth and morphology of seedlings of two Mediterranean oaks used in reforestation programs: the evergreen Quercus ilex L. and the deciduous Quercus cerrioides Wilk. et Costa. CO₂ enrichment increased the germination rate of Q. cerrioides (from 70±7 to 81±3%) while it decreased that of Q. ilex (from 71±10 to 41±12%). Seedlings of both species increased approximately 60% their total biomass in response to CO₂ enrichment but at two different CO₂ concentrations: 500ppm for Q. cerrioides and 700ppm for Q. ilex. This increase in seedlings biomass was entirely due to an augmentation of root biomass. Considering germination and biomass partitioning, an enriched CO₂ atmosphere might not be appropriate for growing Mediterranean evergreen oaks, such as Q. ilex, since it reduces acorn germination and the only gains in root biomass occur at a high concentration (700ppm). On the other hand, a moderate CO₂ enrichment (500ppm) appears as a promising nursery technique to stimulate the germination, growth and root/shoot ratio of deciduous oaks, such as Q. cerrioides.     

Nitrogen use by <Emphasis Type="Italic">Pinus densiflora</Emphasis> trees growing on a Mt. Fuji lava flow

To quantify the nitrogen (N) use by Pinus densiflora trees growing on an infertile lava surface, N pools, N requirement and N uptake through fine roots and N deposition from the atmosphere were estimated. The N requirement and the N uptake of fine roots were 55.5kgNha^–1year^–1 and 39.7kgNha^–1, respectively. Thus, the ratio of N uptake to N requirement of the fine roots was 71.5%. Including fine-root contribution, the total N requirement of the P. densiflora trees was 98.6kgNha^–1year^–1, and the total N uptake was 64.2kgNha^–1year^–1. Thus, the N uptake of the P. densiflora trees was 64.1% of the N requirement, indicating that P. densiflora trees growing on an infertile lava surface obtain some of their N from below-ground organic material layers every year and the contribution of N storage in trees for their growth is not any higher than indicated in previous reports that excluded fine-roots contribution. The wet N deposition of our research forest was only 5.8% of the N requirement of the P. densiflora trees and only 8.9% of the N uptake. Movement of the below-ground organic material layer N concentrations in the F- and L-layers coincides with needle development and fine-root growth, suggesting the possibility that P. densiflora trees extract N from the organic N of those layers for growth.     

Electromagnetic shielding efficiency of the electric field of charcoal from six wood species

Six wood species were carbonized under various carbonization temperatures and nonoxygen conditions to obtained charcoal. The effects of wood species, rate of temperature rise, and carbonization temperature on the electromagnetic shielding efficiency (ESE) of the electric field were investigated. The wood species used in this study were Japanese cedar, China fir, western hemlock, red oak, fortune paulownia, and Taiwan acacia. Tested materials were carbonized in a high-temperature oven under the following conditions: rate of temperature rise 1°–5°C/min; carbonization temperature 500°–1100°C, with temperature intervals of 100°C; maximum temperature maintained for 1h; and flow rate of nitrogen 300ml/min. The electromagnetic insulation strength system was used to detect the ESE of the electric field of charcoal. It was found that western hemlock and fortune paulownia charcoal showed maximum ESE values of of 36 and 61dB generated at a carbonization temperature of 1000°C. The charcoals derived from four other wood species showed maximum ESE values of 28dB for Japanese cedar, 23dB for China fir, 32dB for red oak, and 38dB for Taiwan acacia, respectively, at a carbonization temperature of 1100°C. The ESE value for fortune paulownia charcoal was similar to those of metal nets. The relations between ESE and logarithmic values of resistivity (log) could be represented by a negatively exponential formula.Part of this report was presented at the 50th Annual Meeting of the Japan Wood Research Society, Kyoto, April 2000     

Estimation of the biomass of fine roots and mycorrhizal fungi: a case study in a Japanese red pine (Pinus densiflora) stand

As part of a study on soil carbon flow in forest ecosystems, the biomass of fine roots (2.0mm in diameter) and root-associated fungi, including ectomycorrhizal fungi, were estimated in the summer season in 1998 at a Pinus densiflora (Japanese red pine) stand in western Japan. Fine roots of pine were classified into three categories: class I roots (0.5–2.0mm in diameter), long class II roots (long roots with diameter 0.5mm; II_L), and short class II roots (short roots with diameter 0.5mm; II_S). Total biomass of fine roots (I + II_L + II_S) at this stand was estimated to be 91.0gm^–2, about 23% of which was class II roots (II_L + II_S). Ergosterol, which is a component of fungal membranes, was analyzed to estimate the biomass of root-associated fungi in roots. In the upper soil layers (from the surface to 13.4cm in depth), ergosterol contents in the class I, II_L and II_S roots were in the ranges 43.1–82.2, 126.1–196.3 and 271.2–321.0µgg^–1 root DW, respectively. The ergosterol content was converted to fungal biomass using the median (minimum–maximum) value of ergosterol concentration reported for ectomycorrhizal fungi. Root-associated fungal biomass in this stand was estimated to be 2.0 (0.5–9.6) gm^–2. The data suggest the biomass of ectomycorrhizal fungi in the P. densiflora stand is small compared with that in other forest ecosystems.     

Gamma radiation sensitivity of larvae and adults of the red flour beetle, <Emphasis Type="Italic">Tribolium castaneum</Emphasis> Herbst

In this study, the susceptibility of larvae and adults of Tribolium castaneum (Herbst) to gamma radiation was investigated in the laboratory in Turkey. Gamma radiation was applied at 6 dose levels between 20 and 200Gy to 13–15day-old adults and at 5 dose levels between 20 and 180Gy to 18–20day-old larvae of T. castaneum. All experiments were performed in growth chambers maintained at 27±1°C and 70±5% r.h. The larvae proved to be the more susceptible stage, survival to the adult stage being prevented by exposure of the eggs to 100Gy; the adult stage was less susceptible. LD₅₀ and LD₉₉ values were determined as 19,75 and 42,97Gy for larvae and 33,21 and 64,50Gy for adult stage, respectively. It was concluded that 100Gy is the effective dose for both larval and adult stages.     

Concentration and molecular weight distribution of dissolved organic carbon in a mangrove creek in the Hinchinbrook area,Australia

The concentration and molecular weight distribution of dissolved organic carbon (DOC) are reported for a mangrove creek in the Hinchinbrook area, Australia. DOC concentration ranged from 1.0mg Cl–1 near the creek mouth to 2.2mg Cl–1 at the innermost part of the creek. There was no apparent spatial trend in molecular weight distribution of DOC, with a >300gmol–1 fraction accounting for about 70% of the total in all samples. DOC concentration fluctuated between 0.5 and 1.2mg Cl–1 over one tidal cycle. The samples collected at low tide and during the rising tide were dominated by DOC of >300gmol–1 and <300gmol–1, respectively. This suggested the export of high molecular weight DOC, probably originating from litter leachates, and the import of low molecular weight DOC to the creek.     

Effects of nitrogen and phosphorus fertilization on the growth and nutrition of hybrid poplars on Vancouver Island

The effects of nitrogen (N) and phosphorus (P) rates, P source, and method of P application were tested on growth and nutrition of four clones of hybrid poplar (Populus trichocarpa Torr. & Gray×P. deltoides Bartr. ex Marsh or P. trichocarpa×P. maximowiczii A. Henry) in a plantation on Vancouver Island. Treatments were applied shortly after planting. Nitrogen (0, 500kgNha^–1) was supplied as ammonium sulfate (AS); half of the AS was added at the start of the second growing season. Phosphorus (0, 100, 200kgPha^–1) was supplied as triple super phosphate (TSP), rock phosphate (RP), or diammonium phosphate (DAP) and banded or broadcast. Over four growing seasons, stem volumes increased with AS and P additions. The effects of AS and P each were greatest when the other was also added. Volume was greater when P was applied at 100kgha^–1 than in the P control and did not significantly increase further at 200kgPha^–1. Phosphorus additions were more effective when added as TSP or DAP than when added as RP, but only in P100 and when banded. Banding increased volume when P was applied at 200kgha^–1, but increases were significant only for DAP fertilized trees. Roto-tilling associated with the banding treatment also increased volume when AS and P were not added. Rankings of clones with respect to stem volume varied with N supply and changed over time.     

Effect of thawing regime on growth and mortality of frozen-stored Norway spruce container seedlings planted in cold and warm soil

One-year-old frozen-stored Norway spruce (Picea abies (L.) Karst.) container seedlings were planted in a controlled environment providing an air temperature of 22°C and soil temperature of 9±1 or 18±1°C. At planting the root plugs were either frozen or had been thawing for 4 days at 9°C. During a 5-week growing period, in both cold and warm soil the root growth and height growth were less in frozen-planted seedlings than in thawed seedlings. In addition, frozen-planting delayed bud burst and increased mortality. Soil temperature, however, had no effect on bud burst or mortality. Low soil temperature retarded root growth of seedlings thawed before planting but resulted in both retarded root growth and height growth if root plugs were frozen when planted. These results indicate that planting Norway spruce seedlings with frozen root plugs constitutes a considerable risk for successful forest regeneration at soil temperatures normally prevailing in Fennoscandia in spring or early summer especially if the soil is dry at the time of the planting.     

Physiological and psychological responses to a heavy floor-impact sound generated by dropping an automobile tire in a wooden house

We investigated the physiological and psychological responses of ten healthy male volunteers to a single heavy floor-impact sound generated by dropping an automobile tire from heights of 50, 100, and 150cm in a wooden house. Blood pressure and peripheral blood flow were measured simultaneously, and sensory evaluation was conducted using the semantic differential method. The results obtained were as follows: (1) the systolic blood pressure increased and the peripheral blood flow decreased when the subjects heard the heavy floor-impact sound; (2) the heavy floor-impact sound caused the subjects to feel uncomfortable, but there was no significant change in sharp and monotonous feelings; and (3) for the heavy floor-impact sound for 100cm and that for 150cm, the subjects showed no difference in comfortable feeling, but we detected differences in the variations of both the systolic blood pressure and the peripheral blood flow.Part of this research was presented at the 48th Annual Meeting of the Japan Wood Research Society, Shizuoka, April 1998.     

Compressive deformation of wood impregnated with low molecular weight phenol formaldehyde (PF) resin I: effects of pressing pressure and pressure holding

The deformation behavior of low molecular weight phenol formaldehyde (PF) resin-impregnated wood under compression in the radial direction was investigated for obtaining high-strength wood at low pressing pressures. Flat-sawn grain Japanese cedar (Cryptomeria japonica) blocks with a density of 0.34g/cm³ were treated with aqueous solution of 20% low molecular weight PF resin resulting in weight gain of 60.8%. Oven-dried specimens were compressed using hot plates fixed to a testing machine. The temperature was 150°C and the pressing speed was 5mm/min. The impregnation of PF resin caused significant softening of the cell walls resulting in collapse at low pressures. The cell wall collapse was strain-dependent and occurred at a strain of 0.05–0.06mm/mm regardless of whether the wood was treated with PF resin. Thus, pressure holding causing creep deformation of the cell walls was also effective in initiating cell wall collapse at low pressure. Utilizing a combination of low molecular weight PF resin impregnation and pressure holding at 2MPa resulted in a density increase of PF resin-treated wood from 0.45 to 1.1g/cm³. At the same time, the Youngs modulus and bending strength increased from 10GPa to 22GPa and 80MPa to 250MPa, respectively. It can be concluded that effective utilization of the collapse region of the cell wall is a desirable method for obtaining high-strength PF resin-impregnated wood at low pressing pressures.     

The composition and abundance of microarthropod communities on arboreal litter in the canopy of Cryptomeria japonica trees

In a Cryptomeria japonica plantation, we examined the composition and seasonal abundance of microarthropods in communities associated with habitat substrates in the canopy (defined as dead leaves, dead branches, and living leaves) and compared them with those in soil communities. Habitat substrates and microarthropods were periodically collected by the branch-clipping and washing method from the canopy and by the Tullgren method from the soil. Oribatida, Collembola, and larvae of the Chironomidae, most of which are detritivorous or fungivorous, were dominant in the canopy. The dominant oribatid and collembolan families differed markedly between the canopy and the soil. Numbers of all microarthropods per unit dry weight of leaf or per unit area of branch ranged from 4.2 to 11.7g^–1 dry wt on dead leaves, 0.13–0.48cm^–2 on dead branches, and 1.3–6.4g^–1 dry wt on living leaves. In the soil, the number of individuals per unit ground area ranged from 24000 to 220000m^–2. The total abundances of microarthropods on dead leaves and dead branches were almost constant throughout the year. These results suggest that the arboreal litter characteristic of C. japonica canopies is utilized consistently by large numbers of detritivorous and fungivorous microarthropods, and that the decomposition of dead foliage and branches is initiated in the canopy.     

Effect of auxins (IBA and NAA) and season on rooting of juvenile and mature hardwood cuttings of Robinia pseudoacacia and Grewia optiva

Juvenile (2 year old trees) and mature hardwood (15 year old trees) cuttings of Robinia pseudoacacia and Grewia optiva were tested for their capacity to form roots. Cuttings were prepared in spring, monsoon and winter seasons and treated with different concentrations (250, 500 and 750 mg/l) of IBA and NAA. These were planted in a mist chamber maintained at 25±1°C with relative humidity >70%. Juvenile cuttings of both species rooted significantly better than mature hardwood cuttings in all three seasons, and the age effect was more pronounced in auxin treated cuttings. The highest rooting in juvenile (83.3%) and mature (66.6%) cuttings was observed with the NAA (500 mg/l) treatment in R. pseudoacacia during the spring season. In G. optiva, IBA (250 mg/l) in the monsoon season was most effective and yielding a maximum of 80% and 70% rooting in juvenile and mature cuttings, respectively. Auxin treatments also significantly enhanced the number of roots, root length, leaf number and leaf area. Statistical analysis of data revealed that interactions between age, season and treatments were significant at P <0.05 level for R. pseudoacacia and non-significant for G. optiva.     

Development of binderless particleboard from kenaf core using steam-injection pressing

Binderless particleboards were successfully developed from kenaf core using the steam-injection press. The effects of board density, steam pressure, and treatment time on the properties of the board were evaluated. The target board densities were relatively low, ranging from 0.40 to 0.70g/cm³. The properties [i.e., moduli of rupture (MOR) and elasticity (MOE) in both dry and wet conditions, internal bonding strength (IB), and water absorption (WA)] of the boards increased linearly with increasing board density. Steam pressure and treatment time also affected the board properties. The bending strength and IB were improved with increased steam pressure. A long steam treatment time contributed to low thickness swelling (TS) values and thus better dimensional stability. The appropriate steam pressure was 1.0MPa, and the treatment time was 10–15min. The properties for 0.55g/cm³ density boards under optimum conditions were MOR 12.6MPa, MOE 2.5GPa, IB 0.49MPa, TS 7.5%, and wet MOR 2.4MPa. Compared with the requirement of JIS 5908, 1994 for particleboard, kenaf binderless boards showed excellent IB strength but relatively poor durability.Part of this report was presented at the 19th Annual Meeting of the Japan Wood Technological Association, Tokyo, October 2001     

Effects of soil solarization on nematodes in Croatia

For the first time soil solarization was investigated in Croatia both in the field and in the greenhouse in 1991, 1992, 1993 and 1994. For two months (July and August), the soil was mulched with transparent polyethylene (PE) sheets of 0.015 or 0.050mm thickness. Soil temperatures at depths of 5, 10 and 20cm were recorded daily. In order to assess nematode population densities, soil samples were analysed before mulching and at the end of the mulching treatment. The results of these experiments showed that soil solarization drastically reduced the population of plant-parasitic nematodes (Meloidogyne, Pratylenchus, Paratylenchus, Tylenchus, Tylenchorhynchus spp.) by about 97–100% at a depth of 10cm and 92–97% at a depth of 20cm in the field, while in the greenhouse, the population of plant-parasitic nematodes was reduced by about 89–100% at a depth of 10cm and 98–100% at a depth of 20cm.In the same experiments, the population of saprophytic nematodes in the field was reduced by about 86–90% at a depth of 10cm and 72–89% at a depth of 20cm. In the greenhouse, the population of saprophytic nematodes was reduced by about 87–97% at a depth of 10cm and 87–93% at a depth of 20cm. This data shows that soil solarization was less effective in the control of saprophytic nematodes, which is considered to be an advantage.     

Early effects of four fast-growing tree species and their planting density on ground vegetation in Imperata grasslands

Ground vegetation development was studied under young plantations of Acacia mangium, A. crassicarpa, Gmelina arborea and Paraserianthes falcataria on an Imperata grassland site in South Kalimantan, Indonesia. The study was based on two separate trials: 1) a species trial with a spacing of 3×3 m, and 2) a spacing trial with progressively decreasing planting density. Both trials were established by use of intensive site preparation, NPK-fertilization, and weeding during the first year. Two years after planting and one year after the last weeding, ground vegetation in the first trial was dominated by Imperata cylindrica grass and shrubs Chromolaena odorata and Clibadium surinamense. In the open area (control) only Imperata grass appeared. Significant differences in total ground vegetation biomass (t ha^–1) between the tree species were as follows: G. arborea (0.2) A. mangium (1.4) A. crassicarpa (4.2) < P. falcataria(9.6) open area (11.4). The early results from the spacing trial showed similar trends in the hardwood species' abilities in Imperata suppression. Highly significant linear relationships existed in regression analysis between the distance between planted trees and the ground vegetation biomass as follows: G. arborea (r²=0.75), A. mangium (r²=0.95), A. crassicarpa (r²=0.97), P. falcataria (r²=0.96). Tree species and their planting density should thus be critically considered in forest plantation establishment on Imperata grasslands, since ground vegetation development plays a decisive role in fire susceptibility, maintenance requirements and the promotion of native species in plantations.     

Changes in the physical and chemical properties of six Japanese softwoods caused by lengthy smoke-heating treatment

The effects of prolonged smoke-heating treatments on wood quality were investigated. Six Japanese softwoods were smoke-heated for 100 and 200h at a temperature of 75° ± 5°C, which was recorded inside the log. After smoke heating, wood quality, including moisture content, amounts of chemical components, relative degree of crystallinity (RDC) of cellulose, and sapwood color were examined. Moisture content decreased as a result of smoke heating, especially in sapwood, leading to a uniform distribution of moisture content within a log. Almost no difference was found in the amounts of chemical components between the control woods and the woods that were smoke-heated for 100h. However, in the wood that was smoke-heated for 200h, the amounts of holocellulose decreased, suggesting that thermal deterioration and/or degradation of hemicelluloses had occurred. We assume that the increase in RDC was caused by smoke heating with the crystallization of cellulose and/or thermal degradation of hemicelluloses. Almost no differences were found in sapwood color between the control woods and the woods that were smoke-heated for 100h. In the wood that was smoke-heated for 200h, however, L*decreased, whereas a* and b* increased. As a result, E*ab, showing the total color change, increased, resulting in a deeper color. These results suggest that thermal degradation of hemicelluloses was caused by smoke heating for over 100h. Therefore, smoke heating of softwood logs using a commercial-scale kiln should not exceed 100h.