首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
The measurement of in-site crustal stresses are carried out in Yan Shi Tai coal mine.The outburst-proneness of 6# coal seam are studied with five indexes. Based on the strength testing of coal,the strength criterion is set up. The energy criterion is put forward in the light of engineering practice.According to the "three criteria" mechanical model,the prediction of danger zone of coal burst of 6# coal seam in this mine is carried out.  相似文献   

2.
When gob-side roadways in inclined coal seam are retained by strike long wall mining method, the conveyor roadway are retained under ascending mining and the ventilation roadway is retained under underhand mining. In order to research the differences of roof activity in the two conditions, stack continuous layer boards model and load strips segmentation method are used and the influence of the coal seam dip angle is considered. Then the solving formulas of roadside support resistance under such conditions are obtained. Through comparison and analysis, it shows that roadside support resistance of conveyor roadway gob-side entry retaining is much greater than ventilation roadway gob-side entry retaining. When ventilation roadway gob-side entry retaining is used, roadside support resistance reduces with the coal seam dip angle increases. While conveyor roadway gob-side entry retaining is adoptel, roadside support resistance increases with the coal seam dip angle increases. But when the coal seam dip angle is larger than the natural repose angle of goaf caving gangue, the resistance can be reduced by considering the effect of goaf gangue accumulation. The conclusion provides reference for choosing mining sections order of gob-side entry retaining in inclined coal seam.  相似文献   

3.
To obtain the deep displacement of the coal seam in the working face,multi-point displacements were installed in the coal seam, but the installation of multi-point displacement is differen tunder different geological conditions. This paper is based on the splitting and merging of 7_1 coal and 7_2 coal in Huaibei Mining(Group) Co., Ltd., and analyzes properties of the roof andcoal in the 7_2 coal of the lower coal seam of bifurcation area, and calculates the damage depth of the floor in the process of 7_1 coal mining. The multi-point displacement meter installation is often challenged by hole collapse, stuck pole and broken installation rod in 7_2 coal of the soft coal seam of bifurcation area, as a result, the base points can't be installed in the specified location. In view of this, this paper adopts a new anchor cable mounting rod which can install the whole base points to the specified location without stuck pole or broken mounting stem. All the basic displacement data can be obtained, and the law of mine pressure appearance in stope and tunnel can be accurately controlled, which can be used to maintain the stability of roadway and the safety of stope.  相似文献   

4.
ECMB, which is developed by Amoco company in USA, has very prospective. On the basis of the study on adsorption characteristics of mixture gas in coal, the principle of ECMB has been explored. The order of adsorption capacities of coal for several gases is: CO 2>CH 4>N 2>H 2 when coal adsorbs gas. In 2 member mixture gases, adsorption capacities of coal for mixed gases, methane and carbon dioxide tally with Langmuir equation, but not does for nitrogen and hydrogen. The substance of the increasing drawing ratio of coal seam gas by using ECBM is decreasing adsorption amount of methane in coal by emptying the other gas or gases into coal seam. N 2 is better gas than CO 2 in the process of using ECMB.  相似文献   

5.
The experimental study of physic and mechanic properties of coal seam in a coal mine is presented, and the relation between coal-gas outburst and the strength, the elastic modulus, as well as the deformation property of coal seam is analysed on the basis of the experimental results.  相似文献   

6.
The transport equation and numeric simulation equation of gas migration in compressible coal seam with dual pore have been built up. The distribution curves of gas pressure in coal seam and the attenuation curves of coal or drilling hole wall have been obtained according to solution of numeric simulation and similar theory.  相似文献   

7.
为了确定经济合理的露天矿备采煤量留设位置和保有期,运用露天开采基本原理与统计分析方法,分析新时期露天煤矿的发展变化特点及其对备采煤量留设位置和保有期的影响;以经济效益最优为判断准则,研究复合煤层露天矿备采煤量留设位置与内排运距的关系,建立备采煤量留设位置优化模型;研究季节性剥离露天矿备采煤量保有期与剥离成本、运输成本以及资金时间价值的关系,建立备采煤量保有期优化模型。以内蒙古东部地区某露天矿为研究实例,确定了该矿经济合理的备采煤量保有期为6.5个月,备采煤量应全部留在1号煤层。研究结果表明:该优化模型可用于指导露天矿生产,有效降低剥离成本,提高经济效益。  相似文献   

8.
Gas drainage from boreholes is main method of utilization and management of Chinese coal seam gas. As the exploitation depth increases, stress field and other factors on the impact of gas seepage are increasingly apparent. Based on the basis of a series of assumptions of coal seam gas, porosity and permeability equations are described by considering stress, coal seam gas pressure change on the coal produced by deformation of the skeleton. The fluid-structure coupling equations are derived by using the basic theorem of porous media flow and the fluid structure coupling theory. The gas seepage field is simulated and analyzed by using multi-physics coupling analysis software. The effect of gas pressure distribution, different burial depths and different drilling parameters (drainage negative pressure, drilling radius) on gas seepage field is obtained. Analysis of simulation results can provide theoretical guidance for on-site gas drainage.  相似文献   

9.
The structure and work theory of a new type of hydraulic lock of the thinnest coal seam shearer is described in this paper. Its performance tests have been done the test results show that the performance of hydraulic lock is satisfactory and can be fit for the needs of locking and floating of the cutting drum of the thinnest coal seam shearer  相似文献   

10.
Safe production and procedures at the driving face are restricted in mines of Guizhou province by the long periods required for rock cross-cut coal uncovering in high gas coal seam group. A new method is proposed to solve this problem using high pressure water jet slotting in penetration boreholes. This is proposed to increase the gas desorption rate and reduce drilling hole, which will shorten the cycle of rock cross-cut coal uncovering. Numerical simulation is used to compare the pressure relief effects of different slotting methods in penetration boreholes. The results show that the pressure relief effect of slotting all coal seams is more ideal. Field application indicates that high pressure water jet slotting has good effect of the pressure relief in coal seam group. The drilling number is reduced by 30, the drilling length is shortened by 610 m and the standard time of gas pre-pumping decreases by 39 days.  相似文献   

11.
On the basis of coal seam having outcrop of coal seam and outlet on ground,the method for calculating coalbed gas pressure from the one-dimensional stable gas flow equation by considering deeply the influence of in-situ stress gradient and geothermal temperature is presented. In some mine, the theoretically computing and measuring results of coalbed gas pressure show that the in-situ stress gradient and the geothermal temperature have important influence on the calculation of coalbed gas pressure, and if the factors are drew into the calculation of coaled gas pressure,it will make the results much more accurate.  相似文献   

12.
Aiming at the problem of reasonable decorate of coal gas extraction drilling, combining with the initial and boundary condition of borehole extraction, the solid and gas coupling mathematical model of gas seepage of borehole extraction is deduced based on established control equations of seepage field and deformation field. Taking gas extraction of stone coal slit as an example, according to the characteristics of coal seam in the research, the numerical simulation method is used to obtain the distribution rule of gas pressure, coalbed gas permeability, and coalbed gas seepage velocity as well as seam deformation. The effective radius of gas extraction drilling of single bedding about mining-coal bed is determined, which provides the basis for optimum arrangement of gas extraction drilling of single bedding. The results show that the effective radius of stone coal is about 4 m. If the prolonging drilling drainage time is less than 20%, the drilling quantities would reduce by about 50%.  相似文献   

13.
The paper studies the permeability rules of coal during methane sorption and long-term triaxial load by self-manufactured triaxial permeation apparatus. The experimental coal samples are excavated from Fuxin Stratum Coal seam of HengDa Coal Industry Co., Ltd in Fuxin city. The experiment results show that: the value of coal permeability considering methane adsorption is lower than that without methane adsorption, reducing by 48.94%~82.18%; slippage effect exists in coal after sorpting methane. Coal permeability has significant reduce by 82.05%~92.65% under 18 MPa total stress after 78 day, coal permeability variations with time can be described by negative exponential function. The value of permeability of coal sample is higher than that without stress release condition, but is lower than that under initial condition, which is loaded again after stress release. The value of coal permeability is higher than reservoir permeability under initial stratum condition by current experiment methods.  相似文献   

14.
The mechanism of coal-gas outburst iniration is comprehensively analysed. The direct courses of initating coal-gas outburst are the sudden loss of confining stresses and the gas pressure gradient in coal seam. The effects of working face's advancing rate, geological conditions and gas pressure gradient as well as mechanical & physical characteristics of coal on outburst initation are expounded by means of mathematic analyses about gas seepage which takes place in coal seams. The results are of certain practical significance and reference value to further quantitive study of outburst and its predication.  相似文献   

15.
High pressure pulsed water jet (HPWJ) is a new technology of effectively improving coal seam permeability. However, the mechanism of increased permeability is not yet clear, which restricts the application of HPWJ in different coal seams. From the perspective of improving permeability by coal matrix shrinkage, the impelled dynamic equations is established based on analysis of coal dynamic effects by water jet. According to theoretical analysis of the stress state of coal matrix, it is concluded that HPWJ can promote coal matrix shrinkage, and the relationship equation between jet impact-coal matrix is derived. Besides, the gas seepage function in the coal slotted by the HPWJ is gained by using PM model, which provides theoretical support for generalizing the technology in the coal mine.  相似文献   

16.
在露天开采过程中遇到断层时,由于煤层突然错位,造成剥采比剧变,工程接续困难。因此,过断层期间剥采比合理控制和矿山工程平稳过渡接续是露天开采的技术难题之一。笔者通过建立剥采比与断层落差、产状及煤层厚度数学模型,研究不同煤柱留设宽度对边坡稳定的影响;分析了矿山工程发展速度与同时采煤台阶数的关系,计算确定了过断层期间确保矿山工程平稳过渡接续的动态降深速度和生产能力接续方式。结合胜利东二号露天矿过F61断层进行实例研究。结果表明:过断层开采方式和生产能力接续方法可有效均衡生产剥采比,保证产量稳定,提高矿山经济效益。  相似文献   

17.
This paper studies the effects of ground stress and ground electrical field onmethane transpont in coal seam. A gas seepage equation is set up based on the principles of seepagetheory,which takes the ground stress and ground electrical field into considerationz  相似文献   

18.
Coal is a non-uniform porous medium. The degree of porous development is closely related to absorption-desorption characteristics and flow characteristics of coal seam gas. In order to investigate pore structure of briquette, it is studied the characteristics of porous development of briquette with different coal particle sizes like 4.00~1.70 mm, 1.70~0.38 mm and 0.38~0.18 mm by using CF-2000P polarization analysis software and Fractalfox2.0 fractal analysis software. Testing result shows that with the decrease of coal particle size, briquette pore radius decreases, the total number of pores and fractal dimension increase. And the more the pore develops, the more uniform the pore distributes.  相似文献   

19.
A new method has been put forward to automatically adjust height of drum-typeshearer.The principle of this rnethod is that the boundary of coal and rock is recognized with thepressure changes resulting from the height adjustment of the oil cylinder exerted by the cutting forceswhile the shearer drum is cutting the pure coal seam and the rock.With the help of this the corre-spondent hydraulic serving system can be controlled to adjust the height of shearer drum automati-cally.In this paper, a mathematical model is established a nd experiments and researches have been al-so carried out.  相似文献   

20.
Based on the coal seam of Zhao zhuang coal mine and Si he coal mine belong to Jin cheng anthracite Mining Group in Shanxi province, by using the self developed three axial servo controlled seepage equipment for hot fluid solid coupling of coal containing methane, parallel experiments for permeability of helium and methane under different gas pressures are carried out to quantitatively study the influence of Klinkenberg effects on the permeability of coal. Meanwhile, the problem of permeability decreasing caused by fluid pressure decreasing and gas desorption is eliminated by controlling the effective stress. The results show thatthe Klinkenberg effect is obvious under low gas pressure. With the increase of gas pressure, the permeability of coal decreases at first and then increases. The inflection points of gas pressure for Klinkenberg effect are about 0.9 MPa both for coal samples in Zhao zhuang coal mine and Si he coal mine. When the effective stress is constant, with the increase of gas pressure, the permeability increment caused by Klinkenberg effect decreases, while permeability increment caused by coal matrix shrinkage increases. Coal matrix shrinkage has a close relationship with the mechanical properties of coal rock mass. For the coal sample with a poor mechanical property, coal matrix shrinkage is more obvious.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号