Alkaline‐Carbonate Noodles from Hard Winter Wheat Flours Varying in Protein,Swelling Power,and Polyphenol Oxidase Activity

The effects of wheat protein and starch on yellow‐alkaline noodles have not been fully clarified. Twenty‐four hard winter wheats with varying protein, hot‐water swelling power (SP₉₅), and polyphenol oxidase (PPO) activity were milled into long‐patent and short‐patent flours. Protein, SP₉₅, and PPO activity in the 48 flours were 8.2–12.9%, 16.2–24.1 g/g, and 80–157 ΔA₄₈₀/mg of protein/min, respectively. Lightness of raw noodles declined with increasing protein and PPO levels but yellowness decreased and then increased. Tensile force to break the cooked noodles was positively correlated with SP₉₅ and protein. Compression (50%) force of noodles made from flour with high SP₉₅ ≈21 g/g, averaged ≈20% below those made from low SP₉₅ ≈17 g/g of flour. Compression force was measured in the long dimension of a single noodle strand using a rectangular probe. The instrumental measurements suggest that alkaline noodles made from a single‐null partial‐waxy wheat with medium SP₉₅ ≈19.9 g/g will have a tender bite and a cohesive texture compared with those from a low SP₉₅ wheat with a hard bite and fracturable texture. Furthermore, alkaline noodles from a double‐null partial‐waxy wheat with high SP₉₅ will have an extra soft bite unless flour protein is above ≈12.5%. Hard‐white, dual‐purpose wheat should have a low level of PPO and, depending on the preferred noodle‐eating texture, a low to medium SP₉₅ level. Such wheats with medium protein levels (11–12%) are well suited for alkaline noodles because of improved color and surface smoothness, whereas the same wheats with 12–13% protein are well suited for bread. Wheats with medium SP₉₅ also reduce cooking loss and increase cooked yield.     

Relationship Between Protein Characteristics and Instant Noodle Making Quality of Wheat Flour

We investigated the relationship between the protein content and quality of wheat flours and characteristics of noodle dough and instant noodles using 14 hard and soft wheat flours with various protein contents and three commercial flours for making noodles. Protein content of wheat flours exhibited negative relationships with the optimum water absorption of noodle dough and lightness (L*) of the instant noodle dough sheet. Protein quality, as determined by SDS sedimentation volume and proportion of alcohol‐ and salt‐soluble protein of flour, also influenced optimum water absorption and yellow‐blueness (b*) of the noodle dough sheet. Wheat flours with high protein content (>13.6%) produced instant noodles with lower fat absorption, higher L*, lower b*, and firmer and more elastic texture than wheat flours with low protein content (<12.2%). L* and free lipid content of instant noodles were >76.8 and <20.8% in hard wheat flours of high SDS sedimentation volume (>36 mL) and low proportion of salt‐soluble protein (<12.5%), and <75.7 and >21.5% in soft wheat flours with low SDS sedimentation volume (<35 mL) and a high proportion of salt‐soluble protein (>15.0%). L* of instant noodles positively correlated with SDS sedimentation volume and negatively correlated with proportion of alcohol‐ and salt‐soluble protein of flour. These protein quality parameters also exhibited a significant relationship with b* of instant noodles. SDS sedimentation volume and proportion of salt‐soluble protein of flours also exhibited a significant relationship with free lipid content of instant noodles (P < 0.01 and P < 0.001, respectively). Protein quality parameters of wheat flour, as well as protein content, showed significant relationship with texture properties of cooked instant noodles.     

Characteristics of Noodle Flours from Japan

The compositions and physical properties of Japanese salt and alkaline noodle flours were contrasted and compared to those of flours from U.S. hard white and soft white wheats (HWW and SWW) and from Australian SWW wheats often segregated for salt noodles. The alkaline noodle flours averaged 11.5% protein, which was 3% higher than the salt noodle flours, and they had lower ash content (0.35 vs. 0.41%). Granulation of the salt noodle flours showed the same proportion of small particles (<38 μm) as in soft wheat flours but different levels of intermediate and large particles. The level of small particles was ≈10% greater in salt noodle flours than in the alkaline noodle flours. The alkaline noodle flours had ≈8% more fine particles and 2.5% more damaged starch than the HWW flours, which is consistent with fine grinding of hard wheat flour in the noodle flour. Starch damage also was higher in the salt noodle flours (5.3%) than in the SWW flours. The salt noodle flours had a higher sodium dodecyl sulfate (SDS) sedimentation volume and a higher gluten index than the SWW flours from the United States. The SDS volume and gluten index were lower for the alkaline noodle flours than for the HWW flours, showing the preference for a mellow gluten of low-intermediate strength in alkaline noodle flour. Mixograph data also supported the conclusions of mellow gluten in alkaline noodle flour. The swelling powers (1.7% at 92.5°C) for Australian SWW, salt noodle, U.S. HWW, U.S. SWW, and alkaline noodle flours, were 19.4, 18.1, 17.0, 16.1, and 15.8 g/g, respectively, showing the preferences for high- and low-swelling starch, respectively, in the salt noodle and the alkaline noodle flour. A similar order of flour swelling was indicated by peak viscosity of flours heated at 12% solids in starch paste viscosity analysis. Water holding capacity of flour was correlated highly (r = 0.95, P < 0.01) with swelling power, both measured at 1.7% flour solids at 92.5°C.     

Quantitative and Qualitative Role of Added Gluten on White Salted Noodles

A commercial gluten and glutens isolated from four soft and four hard wheat flours were incorporated into a hard and a soft white flour by replacement to directly determine the quantitative and qualitative role of gluten proteins in making noodles. Gluten incorporation (6%) decreased water absorption of noodle dough by 3%, shortened the length of the dough sheet by 15 and 18%, and increased the thickness of the dough sheet by 18 and 20% in soft and hard wheat flour, respectively. Noodles imbibed less water and imbibed water more slowly during cooking with gluten incorporation, which resulted in a 3‐min increase in cooking time for both soft and hard wheat noodles. Despite the extended cooking time of 3 min, noodles incorporated with 6% gluten exhibited decreases in cooking loss by 15% in soft wheat. In hard wheat flour, cooking loss of noodles was lowest with 2% incorporation of gluten. Tensile strength of fresh and cooked noodles, as well as hardness of cooked noodles, increased linearly with increase in gluten incorporation, regardless of cooking time and storage time after cooking. While hardness of cooked noodles either increased or showed no changes during storage for 4 hr, tensile strength of noodles decreased. There were large variations in hardness and tensile strength of cooked noodles incorporated with glutens isolated from eight different flours. Noodles incorporated with soft wheat glutens exhibited greater hardness and tensile strength than noodles with hard wheat glutens. Tensile strength of cooked noodles incorporated with eight different glutens negatively correlated with SDS sedimentation volume of wheat flours from which the glutens were isolated.     

Protein Quality of Wheat Desirable for Making Fresh White Salted Noodles and Its Influences on Processing and Texture of Noodles

Protein characteristics of wheat flours from various wheat classes, and of commercial flours for making noodles, were evaluated to determine the effects of protein content and quality on processing and textural properties of white salted noodles, as well as to identify protein quality required for making white salted noodles. SDS sedimentation volume based on constant protein weight, mixograph mixing time, and proportions of salt‐ and alcohol‐soluble protein of three commercial flours for making noodles were more similar to those of hard wheat than to soft wheat flours. SDS sedimentation volume of commercial flours for making noodles based on constant protein weight ranged from 38.5 to 40.0 mL and was higher than those of most soft wheat flours. Mixograph mixing time and proportion of salt‐soluble protein of hard and commercial flours for making noodles were >145 sec and mostly <13.8%, respectively, while those of club and soft wheat flours were < 95 sec and >15.0%. Both protein content and protein quality, as determined by SDS sedimentation volume based on constant protein weight, mixograph mixing time, proportion of salt‐soluble protein, and score of HMW‐GS compositions correlated with optimum water absorption of noodle dough and hardness of cooked white salted noodles.     

Environmental Influences on Flour Quality for Sheeted Noodles in Idaho 377s Hard White Wheat

Production of common wheat (Triticum aestivum L.) in the Pacific Northwest of the United States specifically for Asian noodle products is a relatively new goal for grain producers. We surveyed commercial fields of the hard white spring wheat cultivar Idaho 377s in two years to determine the variables contributing to Asian noodle quality and to validate previous observations made with small‐plot research. Fields were surveyed in 1998 and 1999 in two areas of the Snake River Plain of southeastern Idaho separated by ≈100 km, with both irrigated fields and rain‐fed fields sampled in both zones. Samples were evaluated for grain characteristics then milled and evaluated for flour quality, alkaline noodle color, and color and texture of nonalkaline Chinese (salted, neutral pH) noodles. Grain from rain‐fed fields produced brighter and more yellow alkaline noodles than grain from irrigated fields. Grain produced in rain‐fed fields also had lower peak flour pasting viscosity than grain produced in irrigated fields. Flour ash was lowest in grain from rain‐fed fields located in a higher elevation district (Upper Valley) and greatest in grain from irrigated fields located in a lower elevation district (Lower Valley). Noodle hardness and chewiness were greater in Chinese noodles made from grain produced in the Upper Valley than grain from the Lower Valley. Chinese noodle color had significant interaction with the location and irrigation management used for producing the grain. However, Chinese noodle brightness was consistently negatively correlated with flour protein concentration. The color and texture of noodles produced from flours milled from on‐farm commercial production was consistent with previous experiment station small‐plot research.     

Suitability of Ontario‐Grown Hard and Soft Wheat Flour Blends for Noodle Making

This study evaluated the blending of flours made from an Ontario hard red winter wheat (HWF) and an Ontario soft red winter wheat (SWF) and compared it with a commercial standard noodle flour (control) made from Canadian Western Hard Red Spring wheat to assess the impact on white salted noodle‐making performance and texture of cooked noodles. Flour characteristics, gluten aggregation, and starch pasting properties were assessed with a farinograph, GlutoPeak tester, and Rapid Visco Analyzer, respectively. The machinability of dough was evaluated with an SMS/Kieffer rig attached to a TA.XT Plus texture analyzer. Tensile and bite tests of cooked noodles were also conducted. Blending HWF with standard noodle flour decreased gluten strength and dough extensibility linearly proportional to the blend ratio, whereas a curvilinear response from blending SWF with standard noodle flour was observed. HWF demonstrated more favorable pasting properties except for lower peak viscosity for noodle making than standard noodle flour. Below a 20% blend ratio with HWF, no significant changes were seen on dough extensibility, cooking loss, tensile properties, and bite testing parameters of cooked noodles. It can be concluded that blending HWF up to a 20% level caused no significant change in the processing properties of dough and cooked noodle quality. The results also showed that the GlutoPeak tester is a sensitive tool for evaluating gluten strength in wheat flour.     

Characteristics of Noodles and Bread Prepared from Double‐Null Partial Waxy Wheat

Double‐null partial waxy wheat (Triticum aestivum L.) flours were used for isolation of starch and preparation of white salted noodles and pan bread. Starch characteristics, textural properties of cooked noodles, and staling properties of bread during storage were determined and compared with those of wheat flours with regular amylose content. Starches isolated from double‐null partial waxy wheat flours contained 15.4–18.9% amylose and exhibited higher peak viscosity than starches of single‐null partial waxy and regular wheat flours, which contained 22.7–25.8% amylose. Despite higher protein content, double‐null partial waxy wheat flours, produced softer, more cohesive and less adhesive noodles than soft white wheat flours. With incorporation of partial waxy prime starches, noodles produced from reconstituted soft white wheat flours became softer, less adhesive, and more cohesive, indicating that partial waxy starches of low amylose content are responsible for the improvement of cooked white salted noodle texture. Partial waxy wheat flours with >15.1% protein produced bread of larger loaf volume and softer bread crumb even after storage than did the hard red spring wheat flour of 15.3% protein. Regardless of whether malt was used, bread baked from double‐null partial waxy wheat flours exhibited a slower firming rate during storage than bread baked from HRS wheat flour.     

Measurement of Color,Gloss, and Translucency of White Salted Noodles: Effects of Water Addition and Vacuum Mixing

Sensory evaluation showed panelists could detect small differences in gloss and translucency in boiled white salted noodles (WSN) but sensory evaluation requires significant resources. Methods for the measurement of noodle gloss and translucency in boiled WSN were developed and the effects of hardness, protein, water addition, and vacuum mixing on these visual sensory characteristics and color (as measured by CIE L*, a*, and b*) were investigated. Noodles derived from hard wheats at low flour protein contents were more translucent than noodles from soft wheat flour at low protein. This trend changed at the highest flour protein contents observed. Translucency of the soft wheat noodles increased to levels equal to or exceeding the translucency of high protein hard wheat noodles. Translucency of all noodle varieties increased as flour protein increased. CIE L* decreased, a* increased, and b* increased when water addition to dough increased from 30 to 35%, but there was no further effect on color when water addition was increased to >35% for raw soft and hard WSN. Boiled noodle translucency was significantly increased when water addition to the dough was increased from 35 to 38% and when noodles made from soft wheat flour were mixed under vacuum. Vacuum mixing significantly increased gloss of boiled noodles made from soft wheat flours.     

Lipids in Japanese Noodle Flours

Lipids in Japanese salt and alkaline noodle flours and in Australian soft white wheat (SWW) flours were extracted and compared. Nonstarch lipid (NSL) and free lipid (FL) levels ranges were 1.33–1.71% and 0.84–1.04%, respectively, for nine Japanese salt noodle flours compared to 1.43–1.50% and 0.97–1.00% for three Australian SWW flours used mainly to prepare salt noodle. The six Japanese alkaline noodle flours averaged ≈15% less NSL and 20% less FL than the Australian flours. The NSL was separated by column chromatography into nonpolar lipid (NL), glycolipid (GL), and phospholipid (PL) fractions. The NSL extracted from salt noodle and Australian flours contained ≈36% more NL than that from alkaline noodle flour. The composition of NSL was similar for salt noodle and Australian SWW flours but was different for alkaline noodle flour. Japanese salt noodle flour could be differentiated from alkaline noodle flour by the higher levels of NSL and FL, although those elevated levels may be caused in part to the somewhat higher extraction rate for the salt-noodle flours. However, two parameters independent of extraction rate, the ratios of NL/PL and NL/ash were 47 and 15% higher, respectively, in the salt vs. alkaline noodle flours.     

Flour Characteristics Related to Optimum Water Absorption of Noodle Dough for Making White Salted Noodles

Physicochemical properties of 34 wheat flours with various classes and different protein contents were related to optimum water absorption of noodle dough. Club and soft wheat flours generally exhibited higher water absorption (34–37%) of noodle dough than hard wheat flours (31–35%). Optimum water absorption of noodle dough in three hard wheat flours with five different protein contents was 33–37%. Optimum water absorption was negatively correlated with flour protein content and SDS sedimentation volume. Physical properties of flour, damaged starch content, NIRS hardness and water retention capacity, influenced optimum water absorption of noodle dough from club, soft and hard wheat flours. A prediction equation developed using protein content, water retention capacity and SDS sedimentation volume of flour provides a reliable estimation of the optimum absorption of noodle dough for making noodles.     

Two Metal Ions Improve Brightness in Wheat-Dough Products and Affect Aqueous Dispersion of Gluten

Zinc and aluminum ions at 0.05% of wheat flour, dry basis (7.4 and 18.5 mmol/100 g, respectively), improved the brightness of raw and dried spaghetti and salt and alkaline noodles. They also retarded bacteria and yeast and mold growth in salt noodles held at 25°C for two days as determined by total plate counts. Neither metal ion caused a change in noodle cooking quality, but they imparted a slight aftertaste in cooked noodles. Wheat flour dough mixed with 0.05% zinc or 0.025% aluminum ion (fwb), when kneaded in aqueous 0.1% calcium chloride, gave gluten with increased brightness. Zinc and aluminum ions appear to complex with enzymic browning chromophores in wheat dough and gluten and change their spectral properties. Zinc and aluminum ions affected the dispersion of gluten in water at pH ~5.0 and facilitated its spray-drying, but they were not detrimental to baking quality. Citric and tartaric acids at 5 mmol/100 g of gluten (db) gave wet gluten with pH ~4.5, which improved its brightness and water dispersibility.     

Factors in Hard Wheat Flour Responsible for Reduced Cookie Spread

Time-lapse photography showed that, during baking, the diameter of sugar-snap cookies increased linearly then suddenly became fixed. Therefore, cookie diameter was a function of spread rate and set time. Cookies made with soft wheat flour were significantly larger in diameter (184 mm) than those made with hard wheat flour (161 mm). Cookies made with soft wheat flour set later (5.8 min) during baking than those made with hard wheat flour (5.1 min). The differences in set time within cookies made with various hard wheat flours or within cookies made with various soft wheat flours appeared to be affected by flour protein content. However, other factors also affected the difference in set time between cookies made with hard wheat and soft wheat flours. Cookies made with soft wheat flour spread at a faster rate (7.8 mm/min) than those made with hard wheat flour (4.6 mm/min). The level of soluble starch in the flour appeared to cause the difference in spread rate between cookies made with hard wheat and soft wheat flour. The higher level of soluble starch in hard wheat flour (0.352 ± 0.008%) than in soft wheat flour (0.152 ± 0.030%) increased dough viscosity, thus the spread rate was slower. However, soluble starch content did not explain the differences in spread rate within cookies made with various hard wheat flours or within cookies made with various soft wheat flours.     

Significance of Amylose Content of Wheat Starch on Processing and Textural Properties of Instant Noodles

The effect of amylose content of starch on processing and textural properties of instant noodles was determined using waxy, partial waxy, and regular wheat flours and reconstituted flours with starches of various amylose content (3.0–26.5). Optimum water absorption of instant noodle dough increased with the decrease of amylose content. Instant noodles prepared from waxy and reconstituted wheat flours with ≤12.4% amylose content exhibited thicker strands and higher free lipids content than wheat flours with ≥17.1% amylose content. Instant noodles of ≤12.4% amylose content of starch exhibited numerous bubbles on the surface and stuck together during frying. Lightness of instant noodles increased from 77.3 to 81.4 with the increase of amylose content of starch in reconstituted flours. Cooking time of instant noodles was 4.0–8.0 min in wheat flours and 6.0–12.0 min in reconstituted flours, and constantly increased with the increase in amylose content of starch. Hardness of cooked instant noodles positively correlated with amylose content of starch. Reconstituted flours with ≤12.4% amylose content of starch were higher in cohesiveness than those of wheat flours of wild‐type and partial waxy starches and reconstituted flours with ≥17.1% amylose content. Instant fried noodles prepared from double null partial waxy wheat flour exhibited shorter cooking time, softer texture, and higher fat absorption (1.2%) but similar color and appearance compared with noodles prepared from wheat flour of wild‐type starch.     

Refrigerated Storage of Yellow Alkaline Durum Noodles: Impact on Color and Texture

Durum wheat straight‐grade flour samples, representing the cultivars Commander and Strongfield, a composite cargo mixture of Canada Western Amber Durum cultivars and a Japanese commercial durum flour were used to make yellow alkaline noodles. A Canada Western Red Spring common wheat composite straight‐grade flour was included in the study for comparative purposes. Alkaline noodles were prepared using 1% w/w kansui reagent (sodium and potassium carbonates, 9:1) and stored for 1, 2, 3 and 7 days at 4°C to duplicate a normal convenience store operation. The raw noodle color of the durum alkaline noodles exhibited significantly better noodle brightness, L*, and yellowness, b*, as compared to noodles prepared from common wheat at all storage periods. The number of discolored specks in the durum flour based noodles was significantly lower as well as significantly lighter than those of common wheat at all time intervals. Noodles prepared from Commander, Strongfield, or the cargo composite flours displayed significantly lower water uptake during cooking than both the commercial durum flour and the common wheat noodles. The commercial durum flour noodles displayed the thinnest cooked noodles, while the common wheat flour noodles were the thickest. Evaluation of cooked noodle texture, immediately after production and subsequent storage of the raw noodles at 4°C for 1, 2 and 3 days before cooking showed a general increase in maximum cutting stress (MCS) with storage. Noodles prepared from Commander flour consistently display MCS values exceeding those of CWRS as well as the highest resistance to compression (RTC) and recovery (REC) measurements. The visual improvements in noodle brightness, enhanced yellowness, reduced speck numbers and darkness in combination with equivalent to improved cooked noodle texture attributes compared with common wheat flour suggests that durum flours are an ideal material for fresh, refrigerated yellow alkaline noodles.     

Effect of Processing,Formula and Measurement Variables on Alkaline Noodle Color—Toward An Optimized Laboratory System

A standardized laboratory method for assessing the color potential of flours for yellow alkaline (Cantonese) noodles is needed, especially for evaluating large numbers of small‐scale samples such as found in wheat breeding populations. To develop such a method, a number of processing and formula parameters were varied and judged for optimum level based on 1) discrimination and mean separation of flours, 2) sensitivity to minor variation in the protocol parameter, 3) practicality and simplicity for the technician, and 4) time efficiency. Four flours milled from single‐cultivar grain lots representing two with good and two with poor color potential were made into alkaline noodle sheets varying in thickness of 0.75–2.00 mm, water absorption of 33.0–39.0%, mixing time of 2–6 min, and NaCl levels of 0–4% (all flour weight basis). Commission Internationale de l'Eclairage (CIE) tristimulus color space (L*, a*, b*) values were measured at 0–24 hr using white, yellow, and black background tiles. Noodle sheet side and a dough resting period were examined. The flours themselves were a consistently large, significant source of variation for color, especially lightness (L*). Based on the optimization criteria, a noodle sheet thickness of 1.5–2.0 mm, an optimum to slightly over optimum water absorption (36% for the flours in this study) with some adjustment for protein content and dough handling properties, a mixing time of 4 min, no dough resting period, and 2% NaCl were selected. Color measurement at 24 hr on a white or otherwise light‐colored background tile was judged best using a consistent side of the noodle sheet. Resting doughs for 1 hr slightly improved handling and sheeting characteristics but was not included for time efficiencies.     

Impact of Characteristics of Different Wheat Flours on the Quality of Frozen Cooked Noodles

In this study, the impact of characteristics (physicochemical, rheological, and pasting properties) of different wheat flours on the quality of frozen cooked noodles was investigated. In this sample set, results showed the cooking loss of noodles related negatively to flour swelling power. The water absorption of noodles related negatively to the dough stability time, the area, and the resistance to extension. The wheat flour with higher dough development time resulted in frozen cooked noodles with higher hardness, chewiness, and adhesiveness. Springiness of noodles correlated negatively to degree of softening. The tensile properties of frozen cooked noodles were influenced by rheological and pasting properties of wheat flours. The present study indicated high quality of frozen cooked noodles demanded wheat flours with high dough gluten strength, peak viscosity, and final viscosity and with low pasting temperature.     

Genotypic and Environmental Modification of Asian Noodle Quality of Hard Winter Wheats

The relative effects of environment, genotype, and their interactions on the modification of Asian noodle quality attributes were assessed using 38 winter wheat (Triticum aestivum L.) cultivars and breeding lines grown in replicated trials at three Nebraska locations in harvest year 2000. Noodle color was determined in both white salted and yellow alkaline procedures, and noodle textural features were investigated by producing white salted noodles. Significant environmental, genotypic, and genotype‐by‐environment variation was observed for nearly all initial and 24‐hr noodle color traits in both types of noodles. Significant genotypic effects were observed for several textural traits, while significant environmental effects were observed only for noodle hardness and water uptake. However, among the noodle textural traits, the genotype‐by‐environment interaction was significant only for noodle firmness. High and significant phenotypic correlations were observed between color traits in the two noodle applications. Genetic correlations were of lower magnitude, indicating the possibility of breeding wheats specifically for various noodle color types. Strong negative phenotypic and genetic correlations were observed between flour protein content and noodle brightness (L*) values in both yellow alkaline and white‐salted applications. Textural traits largely were independent of noodle color traits. When significant phenotypic or genetic correlations were observed between variable pairs, invariably similar correlations were observed with flour protein content. Noodle cutting force, cutting area, and final thickness showed strong phenotypic and genetic correlations with each other and with protein content. These variables largely were independent of noodle firmness and hardness, which were, in turn, more dependent on alleles at the wheat wx‐A1 and wx‐B1 (waxy) loci. Noodle firmness was greatest in flours from wild‐type wheats; lines with a null allele only at the wx‐A1 locus did not differ from wild‐type. Softest noodles were produced from lines carrying null alleles at both wx‐A1 and wx‐B1, while lines with a null only at wx‐B1 were intermediate in softness.     

Flour Particle Size,Starch Damage,and Alkali Reagent: Impact on Uniaxial Stress Relaxation Parameters of Yellow Alkaline Noodles

Three patent flours, each possessing three different levels of starch damage were prepared from a single hard white spring wheat. Each flour was sieved to yield three flours with different particle size distributions (85–110, 110–132, 132–183 μm). Raw alkaline noodles were prepared from the nine flours using either 1% w/w kansui (sodium and potassium carbonates in 9:1 ratio) or 1% w/w sodium hydroxide. Uniaxial stress relaxation parameters percent stress relaxation (SR%), initial rate of relaxation (k₁) and the extent of relaxation (k₂) were measured on the raw noodles immediately after production (t = 0 min) and at 60 min. Raw noodles after resting for 60 min were optimally cooked and stress relaxation parameters were measured. Raw noodles at t = 0 min exhibited SR%, k₁, and k₂ that were significantly (P < 0.0001) influenced by both the degree of starch damage and the type of alkaline reagent used. Flour particle size only influenced SR% and k₁ (P < 0.025) but had no impact on k₂. In raw noodles aged for 60 min, both SR% and k₂ were significantly influenced by alkaline reagent, particle size, and starch damage (P < 0.01) while k₁ was only affected by the degree of starch damage (P < 0.0001). Cooked noodle SR parameters were all significantly (P < 0.0001) influenced by alkaline reagent, particle size, and the degree of starch damage. Cooked noodles prepared from starch with low damaged flours within any given particle size range, regardless of the type of alkali employed, yielded the most rheologically elastic‐like (firmer) noodles. Two potential mechanisms by which the degree of starch damage influences noodle elastic like texture are discussed.     

Effects of Salt and Alkaline Reagents on Dynamic Rheological Properties of Raw Oriental Wheat Noodles

To gain further understanding of the functionality of ingredients in oriental wheat noodles, the rheological properties of raw noodles made using high protein (Red Bicycle) or low protein (Sandow) wheat flours and various additives (salt or alkaline reagents at concentrations of 0, 0.1, 0.5, 1.0, 2.0, 3.0, and 4.0%) were investigated using frequency sweep and temperature sweep oscillatory tests. Generally, both the elastic modulus(G′) and viscous modulus (G″) of raw noodles increased when various levels of salt or alkaline (kansui and NaOH) reagents were included in the formulation, with the exception of Red Bicycle noodles where the G″ was not significantly affected by the salt. The G′was significantly decreased in the presence of sodium chloride at concentrations ≤4.0% and kansui at <0.5%. The change in rheological properties of raw noodles was related to the wheat flour quality, type, level of additive, and frequency. The G′, G″, phase angle, and complex viscosity changed in a similar pattern when raw noodles were heated from 25 to 100°C. These parameters decreased initially with increasing temperature until they reached a valley and then increased either to a plateau or continuously in noodles containing kansui. The appearance of valley points at 75.5 and 77.2°C during heating of Sandow and Red Bicycle noodles containing salt, and 89.4, and 83.2°C during heating of Sandow and Red Bicycle noodles containing kansui, respectively, was not associated with starch gelatinization as determined using differential scanning calorimetry. The continuous increase in G′, G″, and complex viscosity observed with noodles containing kansui during the hold period at 100°C was attributed to the high pH environment and not to the inactivation of α‐amylase.