Sequential Path Analysis of Yield Components in Potato

In order to determine proper selection criteria for tuber yield in potato clones obtained from true potato seed (TPS) and to evaluate relationships between tuber yield and its components, an investigation was conducted using the five check cultivars Agria, Marfona, Draga, Agata, and Arinda, and 120 potato clones obtained from TPS. The study was conducted in an augmented randomized complete block design with three replications. Yield and its components were recorded. Correlation coefficient analysis showed that tuber yield had significant positive associations with number of tubers per plant, average weight per tuber (tuber size), plant height, diameter of main stem, and number of main and secondary stems per plant, whereas its correlation with tuber dry-matter concentration was significantly negative. Number of tubers per plant, tuber size, and plant height had significant standardized partial regression coefficients with very small tolerance and large variance inflation factor (VIF) values. These were considered as the first-order variables in sequential path analysis.     

Varietal differences in the response of potatoes to repeated short periods of water stress in hot climates. 2. Tuber yield and dry matter accumulation and other tuber properties

Summary The effect of repeated short periods of water stress during the hot season on six potato cultivars was investigated. The number of tubers per plant tended to decrease in response to water stress in cultivars which had more than 9.8 tubers per control plant (Désirée, Alpha, Elvira). In the other cultivars, no consistent effect of water stress on tuber number per plant was observed. Except for Spunta, the percentage of large tubers (>60 g/tuber) was reduced in the water-stressed plants. Consequently, the average weight of these tubers was greater than that of tubers harvested from the unstressed plants, indicating that the sink force of the individual tuber was not impaired by drought. However, tuber yield per plant was reduced due to drought in all cultivars tested. The smallest decrease in dry matter accumulation as well as the greatest lowering of the osmotic potential in the tuber tissue was found in Alpha. No consistent effect of water stress on the percentage of misshapen and sprouting tubers was observed, indicating the marked effect of the high temperature on these traits. Contribution from the Agricultural Research Organization, The Volcani Center, Bet Dagan, Israel, No 310-E, 1981 series. This investigation was sponsored by a grant from the Ministry for Development Cooperation of the Netherlands.     

Selection of Yield-Associated Morphological and Biochemical Traits Using Correlation and Path Coefficient Analysis in Potato (<Emphasis Type="Italic">Solanum tuberosum</Emphasis> L.) in the Foothills of North-Western Himalayas

The objective of the study was to assess the direct and indirect effects of 13 important morphological and biochemical traits on yield enhancement in 28 advanced breeding lines of potato (Solanum tuberosum L.) in the foothills of north-western Himalayas. Tuber yield was positively correlated with number of tubers per plant (r?=?0.76), number of stems per plant (r?=?0.53), number of leaves per plant (r?=?0.43) and tuber weight (r?=?0.37). Furthermore, tuber yield exhibited a significant negative correlation with days to maturity (r?=???0.39). Days to 50% emergence had a significant negative correlation with protein content (r?=???0.42). Path analysis revealed that the components of yield, number of tubers per plant and tuber weight, had high positive direct effects (0.876 and 0.618, respectively) on tuber yield, whereas the effects of other traits were low (≤?0.128). Furthermore, tuber weight had an indirect negative effect on tuber yield through the number of tubers. Tuber size had a low correlation (0.19) with tuber yield because a positive indirect effect (0.451) through tuber weight was balanced by a negative indirect effect (??0.254) through tuber number. The number of stems and number of leaves had positive indirect effects (0.377 and 0.377, respectively) on tuber yield through tuber numbers, whereas days to maturity had a negative indirect effect (??0.298) through tuber numbers. There were virtually no indirect effects through the biochemical traits. The implications for potato breeding are discussed.     

脱毒小薯原原种粒级、密度、品种熟性对一级原种繁殖的影响

采用马铃薯脱毒小薯不同粒级、不同密度、不同品种熟性三因子三水平正交试验，研究了原原种对一级原种的产量、单株平均结薯数及＜２５ｇ小薯所占比率的影响。结果表明：当早熟、结薯少、薯块均匀的品种原原种播种密度在１．２万株／亩以上，晚熟和中晚熟、结薯较多薯块不均匀的品种在１．０～１．２万株／亩之间，且播种粒级大于０．５ｇ／粒时，一级原种繁殖方可收到既高产又具较高的繁殖系数和较低用种量的效果。     

Effect of seed production location on the performance of Russet Burbank clones in southern Australia

In this study, three clones of Russet Burbank were grown at five different seed production sites and one other clone was grown at three of these sites. Seed from these treatments was then evaluated at two commercial production sites, in Victoria and Tasmania. Production site had a significant effect on the subsequent performance. Plant establishment, vigor, maturity, and stem and tuber number per plant were influenced by seed production site. Seed from more southerly locations had increased plant emergence, greater early vigor, earlier maturity, and reduced stem and tuber numbers per plant. Differences between the Tasmanian, Ruen and Victorian Netted Gem clones were small and restricted to the numbers of stems and tubers produced, and some yield components. The Ballarat clone was late maturing and had a high total but low marketable yield due to high levels of oversized and misshapen tubers. However this clone also showed least dark end to the fried crisp. Interactions were detected between clone and seed production site but these have no practical significance.     

Comparative performance of different-sized seed tubers derived from true potato seed

The growth and yield of plants from different-sized seed tubers derived from true potato seed were evaluated on a per stem, per plant, and per unit area basis using either single or multiple-sprout tubers. In single-sprout tubers, haulm dry weight per stem 47 days after planting was greater in the 40–60 g tubers when compared with that in the 5–10 g or the 10–20 g tubers. This resulted in greater tuber weight per stem in the 40–60 g tubers throughout the growing season. The number of tubers per stem was not affected by seed tuber size. In multiple-sprout seed tubers of increasing size, total tuber number and total tuber weight, as well as weight of those tubers larger than 45 mm, increased on a per plant basis but decreased on a per stem basis. At different rates of planting, 1–5 g seed tubers produced smaller tubers than 5–10 g or 10–20 g seed tubers. Increased rate of planting resulted in non-significant yield increases per unit area in plots planted with 1–5 g seed tubers. The yield increases were significant when 5–10 g and 10–20 g seed tubers were planted at higher rates. The number of main stems per unit of seed tuber weight was five times greater in 1–5 g tubers compared with that in 40–60 g tubers. This resulted in low seed weights per hectare when small tubers were planted and in a high ratio of harvested to planted tuber weight.     

马铃薯杂种群体的性状相关及其配合力分析

本试验以7个优良马铃薯品种(系)按不完全双列杂交设计配制组合,分析了群体主要性状与生产力的遗传相关及其配合力效应.结果表明,群体平均单株结薯数、平均块茎重、商品薯数量和产量及小薯数量和产量与群体产量的遗传相关达显著或极显著.平均块茎重、商品薯数量和产量是筛选商品价值较高的优良群体的重要相关性状.亲本的一般配合力效应在平均单株结薯数、平均决茎重、商品薯产量、小薯产量和数量几个性状上对模型Ⅰ差异显著,组合间的特殊配合力效应均达到显著差异.特殊配合力方差为总方差的61.47%～147.52%,表明该群体的生产力主要由非加性基因控制.相对配合力总效应值与产量的相关达极显著水平(r_(3.4)=0.99).综合评定亲本801-5,Katahdin和Baraka在马铃薯群体和品种选育中具有较高的利用价值.     

Beziehungen zwischen Stengel- und Knollenzahl bei der Kartoffel in Abhängigkeit von wichtigen Einflußfaktoren. I. Der Einfluß der Pflanzgutvorbehandlung und der Sorte

Zusammenfassung Die Pflanzgutvorbehandlung beeinflu?te die Stengelzahl signifikant. Abgekeimtes Pflanzgut der Sorten ‘Adretta’ und ‘Mariella’ entwickelte weniger Stengel und Knollen pro Pflanze jedoch mehr Knollen pro Stengel als vorgekeimtes und keimgestimmtes Pflanzgut. Die st?rker negativen Korrelationen zwischen Stengelzahl pro Pflanze und Knollenzahl pro Stengel sowie die h?here Reduktionsrate der angelegten Knollen bei der Sorte ‘Adretta’ weisen auf Sortenunterschiede in der Sch?rfe der Konkurrenz zwischen den Stengeln und innerhalb der Knollenanlagen eines Stengels hin. Die Ernteknollenzahl wurde bei ‘Mariella’ wesentlich durch die Zahl der Knollenanlagen, bei ‘Adretta’ hingegen st?rker durch die Reduktionsrate bestimmt.

---

Summary Three different seed treatments and two cultivars were studied over seven years of field experiments (Table 1). Differences were detected between the cultivars in all characteristics studied: numbers of stems, maximum number of tubers (tuber initials), the number of harvestable tubers (>3 cm) at maturity per plant and per stem, and tuber reduction (percentage of initiated tubers that did not develop). Apart from the number of harvestable tubers, there were also differences between seed treatments (Tables 2, 3 and 4). Chitted seed of ‘Mariella’ and sprouted seed of ‘Adretta’ gave the greatest number of tubers per plant (Tables 3 and 4). In both cases desprouting reduced the numbers of stems and tubers per plant but increased the number of harvestable tubers per stem. Chitted seed set the most tubers per plant and per stem but had the highest levels of tuber reduction (Table 4). Due to intra- and inter-stem competition in both cultivars the percentage tuber reduction is significantly correlated with the number of tuber initials (maximum tuber number, Table 5). Smaller numbers of tubers per stem (Table 3) and significantly negative correlations between the number of stems and the maximum and harvestable number of tubers per stem (Table 5) highlight the effect of strong inter-stem competition in ‘Adretta’. Moreover, in this cultivar intra-stem competition seems to play an important role too. The rate of tuber reduction was significantly higher than in ‘Mariella’ (Table 3), and the final number of tubers significantly depended on the percentage of tuber reduction during the period of tuber growth (r=0,57^*, Table 5). In contrast, the number of harvestable tubers per plant in ‘Mariella’ was significantly correlated with the maximum tuber number during the period of tuber set (r=0,61^*, Table 5).

     

Performances of true potato seed families derived from intermating tetraploid parental lines

Four different sets of true potato seed (TPS) families, representing a total of 262 hybrids derived from intermating tetraploid clones were evaluated in three different locations in Peru. Significant differences were observed among families in tuber yield, uniformity and transplant survival rate in the field. Several families produced an average tuber yield of more than 1.0 kg per plant, with a tuber uniformity of some families approaching that of standard varieties. Hybrid TPS families gave higher tuber yields and more uniform tubers than families from open-pollination. On the basis of an observed family-environment interaction for tuber yield, it is suggested that locally adapted cultivars or advanced selections should be used as parents to generate TPS progenies for specific areas.     

Production of potato minitubers by repeated harvesting: Effects of crop husbandry on yield parameters

Summary Minitubers can be produced in large quantities by repeated harvesting of tubers from in vitro propagated plantlets at 4, 7 and 10 weeks after transplanting to the glasshouse at high plant densities. Yield parameters of minitubers can be manipulated by crop husbandry. By supplying nutrients or using a square plant arrangement, minituber yield increased. Effects on numbers of tubers were cultivar-dependent. Changing plant density from 50 to 800 plants per m² or the minimal diameter of harvested tubers from 5 to 12 mm did not significantly affect tuber yield per m². Higher plant densities resulted in more tubers per m² but fewer tubers per plant. Removing smaller tubers greatly increased the number of small tubers, but did not affect yield and number of tubers in larger grades. Crop husbandry techniques affected minituber yield mainly through their effects on leaf area duration, and the number of minitubers through their effects on growth of tubers to a harvestable size.     

Soft-rot resistance combined with other tuber characters in long day-adaptedSolanum phureja

Summary Offspring were produced from a cross between two long-day-adaptedSolanum phureja clones which carried resistance to tuber soft rot (Erwinia carotovora subsp.atroseptica). In tests carried out on the produce of field-grown plants raised from tubers, over fifty per cent of the 173 offspring were found to be highly resistant. Assessments were also carried out of tuber yield, mean tuber weight, tuber number, shape, regularity, flesh colour, texture of the steamed flesh, fry colour, after-cooking blackening, sprout length after storage and overall dormancy. There were statistically significant differences between clones for all characters (P<0.001). Twelve of the clones were selected on the basis of high resistance, yield, tuber weight, regularity of shape and absence of after-cooking blackening. The value of resistant long-day-adapted diploid material for commercial breeding is discussed.     

Seasonal differences in the field performance of micropropagated potato under a short growing season in Quebec

Field performance comparisons between ex vitro plantlet-derived (EVPD) plants and seed tuber-derived (STD) plants ofRusset Burbank were conducted for two consecutive years under a short growing season in Quebec. The EVPD plants produced more potential seed tubers than STD plants although total tuber biomass of EVPD plants was less than that of STD plants. The frequency and weight distributions of tubers formed by the two types of propagates were different. The EVPD plants produced significantly more small sized tubers and fewer large sized tubers than the STD plants. Average tuber weight was less for EVPD than STD plants for each of five size categories. No significant differences were found in the fresh and dry weight of plants, leaves and stems at harvest time. However, plant height and growth habit differed between the two types of propagates. The EVPD plants had a unique appearance. They produced a single stem with extensive axillary bud development. The EVPD plants were apparently more susceptible to early water stress in the field than STD plants, probably due to an earlier production of stolons. No differences were found between ex vitro plantlet- or microtuber-derived plants, in plant growth or yield characteristics.     

Interrelationships of the number of initial sprouts,stems, stolons and tubers per potato plant

Summary The relationships between the number of initial sprouts, the number of main stems, stolons and tubers per plant are depicted in 4-quadrant figures. The number of sprouts per seed tuber varied because of different pre-sprouting conditions and/or because of the use of different cultivars. Good linear relationships are shown between the numbers of sprouts and stems, stolons and tubers, and sprouts and tubers, but especially between stolons and tubers within each trial with the one cultivar. When comparing different experiments with the one cultivar the linear relationship between the numbers of stems and stolons disappeared. When comparing different cultivars, no relation was found between the numbers of sprouts and stems. These two cases also led to a statistically less significant relation between the number of sprouts planted and the number of tubers harvested.     

Some estimates of genotype × environment interactions in potato variety tests

Five cultivars were studied for 3 years to estimate the genotype × environment interactions. Plant height was studied at four locations. The tuber characters, yield, type, number, and specific gravity were studied at three locations. There were no significant clone × location or clone × year interactions. The clone × year × location interaction was significant for plant height and tuber yield. The clone × replication in year and location interaction was significant for all characters studied. The theoretical variance of a clonal mean was used to determine the most efficient allocation of plots. The largest reduction in standard error of the mean was obtained by increasing locations. Comparisons of standard errors of differences in percentages of the observed mean were also made to estimate precision obtained with specific testing procedures.     

Hill to hill variations in tuber yield of potatoes in Alberta

The hill to hill variation in tuber yield and mainstem number was studied on 18 potato farms. There were up to 14-fold differences in the tuber yield per hill among plants of Norland, Russet Burbank, Norchip, Carlton and Alaska Red. The mainstem number was more variable than tuber weight per hill in Norland, Russet Burbank and Alaska Red. However, the opposite was true in Norchip and Carlton. In nearly all comparisons, the number of tubers per hill was less variable than tuber weight and mainstem number per hill. The total variation in tuber weight found in about 50% of the samples could be explained by the variance of hills within rows. Even in samples where an added variance component due to differences among rows was present, relatively more variation occurred within than among rows. The correlation coefficients between the number of mainstems and tuber weight per hill were positive but significant (P&< 0.05) only in Norland and Norchip. The correlation coefficients between the number of mainstems and number of tubers per hill were also positive but slightly higher and significant (P<0.01) in all 5 cultivars. The coefficient of determination values indicated that variation in cut seed piece weight explained only about 10% of the total variation in tuber weight harvested per hill. At a spacing of 30 cm within the row, a major proportion of hill to hill variation in tuber yield had to be explained by factors other than the seed piece weight.     

Nitrogen fertilization and irrigation affects tuber characteristics of two potato cultivars

Nitrogen fertilization, irrigation, and cultivars affect tuber characteristics such as tuber size, specific gravity, and N concentration. Few studies, however, have investigated the interaction of irrigation and N fertilization on the tuber characteristics of potato cultivars, particularly in Atlantic Canada. The objective of this on-farm study, conducted at four sites in each of three years, 1995 to 1997, was to determine the effects of supplemental irrigation and six rates of N fertilization (0-250 kg N ha^-1) on the number of tubers per plant, the average fresh tuber weight, tuber N concentration, nitrate (NO₃-N) concentration, and specific gravity of the cultivars Shepody and Russet Burbank. Nitrogen fertilization increased the average fresh tuber weight, tuber N and N0₃-N concentrations, and decreased specific gravity. Effects of increasing N fertilization on tuber characteristics were often more pronounced for Shepody than for Russet Burbank, and for irrigated than for non-irrigated conditions. Shepody had greater average fresh tuber weight and tuber N concentration, lower specific gravity, and fewer tubers per plant than Russet Burbank. Supplemental irrigation increased the average fresh tuber weight and the number of tubers per plant, but it had a limited effect on specific gravity and tuber N and NO₃-N concentrations. Tuber NO₃-N con centration and specific gravity were strongly related to tuber N concentration, which in turn depended primarily on N fertilization. Incidents of lowest specific gravity and highest NO₃-N concentration occurred with a relative yield close to or equal to 1.0. We conclude that the risks of low specific gravity and high tuber NO₃-N concentration are greater when fertilization exceeds the N requirements to reach maximum tuber yield.     

Manipulation of tuber-size distribution of a potato crop

Summary Tuber-size distribution is regulated by many diverse, interacting mechanisms and is therefore difficult to understand and manipulate. It is determined by plant density, number of stems per plant, number of tubers per stem, and yield. Seed size and plant number per unit area are easy to control, but stem number is affected by less controllable factors. Interactions between stems of different types are important for tuber-size distribution. The hormonal regulation of stolonization and tuberization is still unknown, but under the conditions of north-west Europe the process of tuber set (which is also poorly understood) makes a greater contribution to the final number of tubers than tuberization. The total yield is also relevant, because it affects both the average tuber size and its variation. Tubers on the same stem differ in timing, rate and duration of growth. The resulting hierarchy in sink strength is not consistent over time. Several mechanisms are suggested for this hierarchy.     

Growth attributes of potato and their inter-relationship with yield

Summary In the mild and short winter of the Ganges plains, the yield contributing characters such as number of shoots/plant, plant height, leaflet size, tuber yield/plant and tuber number/plant were studied for fifty varieties of potato. From the simple, partial and genotypic and phenotypic correlation studies it was observed that leaflet size, number of tubers/plant and plant height were closely connected with the yield of potato tubers. A multiple regression equation was also prepared and it was found that the leaflet size had the maximum influence on yield followed by number of tubers/plant and plant height.     

The Effect of Nitrogen Rate on Vine Kill,Tuber Skinning Injury,Tuber Yield and Size Distribution,and Tuber Nutrients and Phytonutrients in Two Potato Cultivars Grown for Early Potato Production

Early potatoes are typically produced using less nitrogen than a full season potato crop as high rates of nitrogen may delay tuber set and lead to excessive vine growth that is difficult to terminate prior to harvest. Bintje and Ciklamen potato cultivars were grown with preplant soil nitrogen levels of 34 to 38, 67, and 101 kg N ha^-1 in 2013 and 2014 near Paterson, Washington. Nitrogen rate had little impact on the number of tubers and stems per plant of both cultivars, but increasing nitrogen rate tended to increase leaf area of both cultivars. Vine desiccation of Bintje with diquat was less complete as nitrogen rate increased, while Ciklamen vine kill was reduced by higher nitrogen in 1 of 2 years. Tuber skinning injury, tuber weight loss, and tuber size distribution were not affected by nitrogen rate. Tuber skinning injury and tuber weight loss were reduced in both cultivars by harvesting at 4 weeks after initial vine kill compared to harvesting at 2 weeks after vine kill. Total tuber yield was lower for both Bintje and Ciklamen in 1 of 2 years at the 34 to 38 kg N ha^-1 rate. Tuber nitrogen and zinc levels tended to increase with increasing nitrogen rates, while most other nutrients, vitamin C, total phenolics, and antioxidant capacity showed little response. It appears that 67 kg N ha^-1 provides adequate nitrogen to produce a good tuber set and yield of small tubers while not producing excessive vine growth that may be more difficult to kill.     

Hill Shape Effect on Yield,Quality, Stolon Length and Tuber Orientation of Two Potato Cultivars

Potato (Solanum tuberosum L.) cultivars are mostly planted using similar seed piece planting depths and hill shapes even though cultivars have unique tuber and stolon characteristics. A hill-shape study was conducted at Aberdeen, Idaho to determine the effects of hill shape on yield and field-green tuber yields and quality along with stolon length and tuber spatial orientation for two potato cultivars, 'Defender' and 'Summit Russet.' Plots were planted in late April to early May. Prior to emergence four hill shapes were formed: 1) plant-and-drag, 2) broad, 3) normal, and 4) peaked. Defender had higher total yield with the broad hill, but there were no differences among the remaining three hill shapes. For Defender, U.S. No. 1 yield was lower with the plant-and-drag hill shape, and the normal and peaked hills produced lower field-green tuber yield. Hill shape had no effect on total, U.S. No. 1, or field-green tuber yields of Summit Russet. The peaked hill resulted in a deeper uppermost tuber for Defender, while the uppermost tuber was deeper in the normal and peaked hills for Summit Russet. The broad hill resulted in a larger average tuber size for Defender, but hill shape had no effect on tuber size for Summit Russet. Total number of tubers per plant, stolon length and tuber spatial orientation were not affected by hill shape for either cultivar. Hill shape and height are important considerations in maximizing yield of saleable tubers, so needs to be customized according to cultivar-dependent stolon length and tuber orientation characteristics.