Application of 1H-nuclear magnetic resonance spectroscopic method for quinidine to simultaneous determination of quinidine and dihydroquinidine in quinidine sulfate tablets

Based on the structural differences between quinidine and dihydroquinidine, a 1H-nuclear magnetic resonance spectroscopic method previously reported for quinidine drug substance was modified and shown to be applicable to the quantitative determination of both compounds in quinidine sulfate tablets. Deuterated chloroform was used as the solvent and hexamethylcyclotrisiloxane served as an internal standard. The average recovery and standard deviation of quinidine sulfate (calculated as the sum of quinidine sulfate plus dihydroquinidine sulfate) from synthetic formulations was 98.94 +/- 0.43% (n = 10). Five lots of 200 mg tablets of quinidine sulfate from one commercial source were found to contain from 92.9 to 95.8% quinidine sulfate, and from 1.1 to 7.0% dihydroquinidine sulfate.     

Ultraviolet spectrophotometric determination of hydralazine hydrochloride in tablets following derivatization with nitrite

Routine use of the USP XXI spectrophotometric method for the content uniformity determination of hydralazine hydrochloride tablets has shown that tablet excipients can significantly alter the spectral characteristics of the drug and thus cause inaccurate assay values to be obtained. Because of this problem, a simple and reliable alternative spectrophotometric assay method, based on the conversion of hydralazine to tetrazolo [5,1-alpha]phthalazine with nitrite ions under acidic conditions, was developed. The derivative showed an absorption maximum at about 274 nm and obeyed Beer's law over the concentration range 4-40 micrograms/mL. Mean recoveries of hydralazine hydrochloride added to commercial coated and uncoated tablets were 101.0% (n = 10) and 100.8% (n = 8), respectively. The proposed method was found suitable for the assay not only of individual tablets but also of tablet composites.     

Reverse phase liquid chromatographic determination of bisacodyl in dosage forms

A method is described for the determination of bisacodyl in enteric-coated tablets and suppositories by liquid chromatography (LC). The method will also determine the hydrolysis degradation products monoacetylbisacodyl and desacetylbisacodyl. The sample is dissolved in 2-propanol, and the extract is diluted with the mobile phase and injected into a liquid chromatograph fitted with a mu Bondapak C18 column and an ultraviolet detector set at 254 nm. The column is eluted with methanol-acetonitrile-0.01M citric acid (25 + 25 + 50). The pooled mean recovery value for bisacodyl from commercial enteric-coated tablets and suppositories was 99.7% with a pooled coefficient of variation (CV) of 0.72%. For content uniformity assays, the CVs were 0.7 and 1.0% for groups of 10 individual commercial suppositories and tablets, respectively. Differences between assay values by the LC and USP XX methods were 0.2% of declared for enteric-coated tablets (n = 5) and 1.0% of declared for suppositories (n = 2). The LC method can determine as little as 0.015 microgram of the monoacetyl or desacetyl degradation product.     

Liquid chromatographic determination of penicillin V potassium in tablets and powders for oral solution

A reverse-phase liquid chromatographic method is described for the assay of penicillin V potassium in tablets and powders for oral solution. Under isocratic conditions, the combined use of an octadecylsilane column, with a mobile phase composed of acetonitrile-methanol-0.01M monobasic potassium phosphate (21 + 4 + 75, v/v), and photometric detection at 225 nm, separated penicillin V potassium from excipients, related compounds, and degradation products. Sulfadimethoxine was used as an internal standard. Detector responses were linearly related to concentrations of penicillin V over the range 25-225 micrograms/mL (r = 0.99997). Standard addition recoveries ranged from 98.8 to 99.9% (mean 99.5%, n = 8) for tablets and from 97.9 to 101.6% (mean 99.8%, n = 8) for powders for oral solution. The liquid chromatographic assay results were compared with those obtained by the official iodometric titration method. The proposed method is simple, selective, stability-indicating, and free from interference by excipients and degradation products.     

Normal phase liquid chromatographic determination of sulfamethoxazole in tablets: collaborative study

A stability-indicating liquid chromatographic method is presented for determining sulfamethoxazole in tablets. The method uses a 10 micron silica column, an isooctane-methylene chloride-2-propanol-acetonitrile-glacial acetic acid (70 + 25 + 5 + 5 + 0.5) mobile phase, and photometric detection at 254 nm. Seven laboratories collaboratively studied this method on powdered composite samples prepared from commercial 500 and 1000 mg tablets and on an authentic tablet mixture containing 83.32% added sulfamethoxazole. Mean assay results for the 500 and 1000 mg tablets were 102.2 and 97.9% of declared, respectively (n = 4). The mean recovery value for the synthetic sample was 99.4% (n = 4). The pooled reproducibility standard deviation (SD) (coefficient of variation (CV)) and pooled repeatability SD (CV) were +/- 1.01 (1.01%) and +/- 0.96 (0.96%), respectively. These results were in good agreement with those obtained by the Associate Referee for the titration method of USP XX. The proposed method can also be used for monitoring the presence of sulfanilamide in sulfamethoxazole by increasing the proportions of both acetonitrile and 2-propanol in the mobile phase. The method has been adopted official first action.     

Liquid chromatographic determination of carbamazepine in tablets

A simple and rapid liquid chromatographic method is described for the qualitative and quantitative determination of carbamazepine in tablet composites and individual tablets, using the internal standard technique. Analyses were performed on a C-18 reverse-phase column with tetrahydrofuran-methanol-water (8 + 37 + 55) as the mobile phase. A linear relationship was obtained between detector responses at 254 nm and amounts of carbamazepine injected ranging from 0.2 to 1.7 micrograms. The coefficient of variation for 10 consecutive injections of a standard preparation was 0.4%. Recoveries of carbamazepine from 100 and 200 mg tablets averaged 101.4 and 99.7%, respectively. Assay results for commercial tablets analyzed by the proposed method agreed favorably with those obtained by the method of USP XXI. The assay results for individual tablets indicated that deviations from the average value and the range of individual values are much wider with the compendial method than with the proposed method.     

Liquid chromatographic determination of medroxyprogesterone acetate in tablets

A reverse-phase liquid chromatographic method is described for the assay of medroxyprogesterone acetate in tablets. An octadecylsilane (C18) column with a mobile phase of methanol-0.01M dibasic ammonium phosphate (80 + 20 v/v, pH 7.2 +/- 0.1) and photometric detection at 254 nm separates medroxyprogesterone acetate from excipients. Detector responses were linear to concentrations of medroxyprogesterone acetate over the range 50-150 micrograms/mL (r = 0.999). Mean recovery of medroxyprogesterone acetate added to tablet excipients was 100.8%. Mean assay results were 101.3% (n = 3). The assay results are comparable to those obtained by the compendial liquid chromatographic method.     

Identification of a propantheline analog in propantheline bromide tablets

A major impurity in a sample of propantheline bromide tablets has been identified as 9-hydroxypropantheline on the basis of the proton magnetic resonance (PMR) and mass spectra (MS). This identification was confirmed by methanolysis of the tablet extract, which yielded a mixture of methyl xanthanoate and methyl 9-hydroxyxanthanoate. A liquid chromatographic (LC) procedure is described which will permit quantitation of 9-hydroxypropantheline bromide in the presence of propantheline bromide, xanthone, and xanthanoic acid.     

Identification of benzethonium chloride in commercial grapefruit seed extracts.

Commercial grapefruit seed extracts (GSE) were extracted with chloroform. The solvent was evaporated, and the resulting solid was subsequently analyzed by high-performance liquid chromatography, electrospray ionization mass spectrometry, nuclear magnetic resonance (NMR) spectroscopy, and elemental analysis (by proton-induced X-ray emission [PIXE] analysis). The main constituent was identified as benzethonium chloride, a synthetic antimicrobial agent commonly used in cosmetics and other topical applications. This compound comprised 8.03% (n = 2) of the liquid GSE sample. Higher amounts of benzethonium chloride were found in powder GSE samples.     

Liquid chromatographic determination of coumarin anticoagulants in tablets: collaborative study

A liquid chromatographic method for the determination of coumarin anticoagulants in tablets was collaboratively studied by 7 laboratories. The method uses an octadecylsilane-bonded microparticulate column, tetrahydrofuran-methanol-water-acetic acid mobile phase, and photometric detection at 311 nm. Each collaborator received samples of warfarin sodium, phenprocoumon, and dicumarol as a synthetic composite and as commercial individual and composited tablets. Pooled average assay values for synthetic and commercial tablet samples of warfarin sodium were 101.6 and 99.5%, respectively, with a combined reproducibility SD of 2.38% (CV = 2.37%) and combined repeatability SD of 1.49% (CV = 1.49%). Pooled average (SD) assay values for dicumarol and phenprocoumon commercial samples were 98.0 (2.27) and 101.3% (4.00), respectively. The content uniformity determinations of 2 mg warfarin sodium and 25 mg dicumarol tablets indicated average tablet contents (range) of 99.5% (91.0-116.0) and 98.0% (89.8-108.8), respectively. The method has been approved interim official first action.     

Automation of dihydroxyaluminum sodium carbonate analysis in antacid tablets by energy dispersive X-ray fluorescence

A sensitive, specific, automated energy dispersive X-ray fluorescence (EDXRF) method for determination of anhydrous dihydroxyaluminum sodium carbonate in antacid tablets has been developed. The compound was quantitated by impact grinding, pelletizing at 10 tons pressure, and monitoring the aluminum by using a rhodium anode X-ray tube, high resolution thermoelectrically cooled Si(Li) detector with sample spinning, and computer data processing. The assay procedure was validated with spiked laboratory-prepared samples at 100 +/- 20% levels. The average recovery was 100.6% with a relative standard deviation of 1.6% (n = 14). Instrument precision was determined and found to have an average relative standard deviation of 1.0% (n = 16). In addition, analysis precision by the EDXRF method was compared to that for titration and autoanalyzer methodologies and found to be statistically comparable. The sample precision had an averaged relative standard deviation of 2.7% (n = 16) by X-ray methodology. The advantages of this EDXRF method include increased sample throughout with excellent precision and accuracy, no solvent usage, and automated data handling.     

Determination of diastereomeric purity of tranylcypromine sulfate by proton magnetic resonance spectroscopy with lanthanide shift reagent

Use of proton nuclear magnetic resonance spectroscopy and the lanthanide shift reagent, Eu(hfc)3, resulted in a simple and reliable method for determination of the diastereomeric purity of trans-2-phenylcyclopropylamine sulfate (tranylcypromine sulfate). Eu(hfc)3 effectively simplified the complex overlapping pattern of the 5 non-equivalent phenyl protons to a virtually first order pattern. At a shift reagent to substrate molar ratio of 0.75, and a substrate concentration of 0.25M (as the free base) in CDCl3, the resonances for the cis- and trans-ortho-phenyl protons at 11.39 and 9.99 ppm, respectively, were sufficiently resolved to be of use in quantitative work. Analysis of synthetic diastereomeric mixtures of 2-phenylcyclopropylamine sulfate by the proposed method yielded results that were in close agreement with the expected values. The mean recovery (SD) of trans-diastereomer was 100.51% (0.40) (n = 6). Levels of less than 2% of cis-diastereomer were measurable in cis-trans mixtures.     

Semiautomated determination of tridihexethyl chloride in meprobamate tablets

A semiautomated method has been developed for the analysis of tablets containing tridihexethyl chloride in combination with meprobamate. The method is based on the USP assay for tridihexethyl chloride in tablets. The active ingredient is dissolved in water, the aqueous solution is mixed with buffer and dye solution, and the dye complex is extracted into chloroform. The absorbance of the chloroform solution is monitored at 408 nm. Results from the semiautomated method agree with results for the USP method. Recoveries from authentic formulations show no interference from the excipients tested.     

Liquid chromatographic determination of acetaminophen in tablets: collaborative study

A reverse phase liquid chromatographic method previously reported for the determination of acetaminophen in tablets was collaboratively studied by 5 laboratories. Each collaborator received duplicate samples of a synthetic tablet formulation and 3 powdered commercial tablet composites. The composites represented single-component and multi-component proprietary products and a single-component generic product. The pooled repeatability (CVDo) and reproducibility (CVDx) values for the proprietary tablets were 0.89 and 1.34%, respectively. For the generic tablets, these values were 0.66 and 0.74%, respectively. The pooled recovery value for acetaminophen added to the synthetic formulation was 98.9 +/- 0.7% (n = 10) with a CV of 0.75%, CVDo of 0.37%, and CVDx of 0.78%. The overall repeatability of the method was 0.64%, and the overall reproducibility was 0.95%. The method has been adopted official first action.     

Determination of enantiomeric purity of tranylcypromine sulfate by proton magnetic resonance spectroscopy with chiral lanthanide shift reagent

Optimum experimental conditions were developed for determination of the optical purity of samples of tranylcypromine sulfate by proton magnetic resonance spectroscopy after complexation with the chiral lanthanide chelate Eu(hfc)3. At a substrate concentration of 0.25M (0.125M as sulfate) in CDCl3 and an Eu(hfc)3 to substrate molar ratio of 1, the methine proton geminal to the amino group in the cyclopropane ring showed the largest induced shift and largest enantiomeric induced shift difference. From the relative intensities of the resolved (+)-CH-NH2 protons (15.77 ppm) and (-)-CH-NH2 proton (16.04 ppm), the enantiomeric purity and percentage compositions were readily calculated. The mean +/- SD recovery of (+)-tranylcypromine sulfate from synthetic enantiomeric mixtures was 101.02 +/- 2.59 (n = 6).     

Extraction, processing, and storage effects on curcuminoids and oleoresin yields from Curcuma longa L. grown in Jamaica

Aromatic diarylheptanoid compounds from Curcuma longa Linn grown in Jamaica were quantified by UV-vis spectrophotometry and high-performance liquid chromatographic (HPLC) analyses. The oleoresin yields from ethanolic extracts were quantified and evaluated with regard to the effects of the type of postharvesting process and the type of extraction method conducted on the plant material. Fresh samples that were hot solvent extracted provided the highest oleoresin yields of 15.7% +/- 0.4 ( n = 3), and the lowest oleoresin yields of 7.8% +/- 0.2 ( n = 3) were from the dried milled samples that were cold solvent extracted. Data from the ASTA spectrophotometer assay confirmed that dried samples contained the highest curcuminoid content of 55.5% +/- 2.2 ( n = 6) at the fifth month of storage, and the fresh samples showed a curcuminoid content of 47.1% +/- 6.4 ( n = 6) at the third month of storage. A modified HPLC analysis was used to quantify curcumin content. Data from the HPLC analysis confirmed that the dried treated, hot extracted, room temperature stored samples had the highest curcumin content of 24.3%. A novel high-performance thin layer chromatography (HPTLC) method provided a chemical fingerprint of the C. longa with the use of a commercial curcumin standard.     

Proton magnetic resonance spectroscopic method for determination of phenylbutazone and oxyphenbutazone in tablets

A simple, specific, and rapid 1H nuclear magnetic resonance spectroscopic method for the assay of phenylbutazone and oxyphenbutazone is described. Spectra are recorded in CDCI3 containing 1,3-dichloro-5-nitrobenzene as an internal standard. The aromatic proton resonances for the standard, at delta 7.7 and 8.2, are well separated from those of phenylbutazone and oxyphenbutazone, which are in the region of delta 6.5-7.3 ppm. Average percent recoveries of phenylbutazone and oxyphenbutazone were 98.9 and 98.6 with standard deviations of 0.6 and 0.7, respectively. Commercial formulations were analyzed and the results obtained by the proposed method closely agreed with those found by the British Pharmacopoeia method.     

Sodium borohydride/chloranil-based assay for quantifying total flavonoids

A novel sodium borohydride/chloranil-based (SBC) assay for quantifying total flavonoids, including flavones, flavonols, flavonones, flavononols, isoflavonoids, flavanols, and anthocyanins, has been developed. Flavonoids with a 4-carbonyl group were reduced to flavanols using sodium borohydride catalyzed with aluminum chloride. Then the flavan-4-ols were oxidized to anthocyanins by chloranil in an acetic acid solution. The anthocyanins were reacted with vanillin in concentrated hydrochloric acid and then quantified spectrophotometrically at 490 nm. A representative of each common flavonoid class including flavones (baicalein), flavonols (quercetin), flavonones (hesperetin), flavononols (silibinin), isoflavonoids (biochanin A), and flavanols (catechin) showed excellent linear dose-responses in the general range of 0.1-10.0 mM. For most flavonoids, the detection limit was about 0.1 mM in this assay. The recoveries of quercetin from spiked samples of apples and red peppers were 96.5 +/- 1.4% (CV = 1.4%, n = 4) and 99.0 +/- 4.2% (CV = 4.2%, n = 4), respectively. The recovery of catechin from spiked samples of cranberry extracts was 97.9 +/- 2.0% (CV = 2.0%, n = 4). The total flavonoids of selected common fruits and vegetables were measured using this assay. Among the samples tested, blueberry had the highest total flavonoid content (689.5 +/- 10.7 mg of catechin equiv per 100 g of sample), followed by cranberry, apple, broccoli, and red pepper. This novel SBC total flavonoid assay can be widely used to measure the total flavonoid content of fruits, vegetables, whole grains, herbal products, dietary supplements, and nutraceutical products.     

Liquid chromatographic determination of organic nitrogenous bases in dosage forms: a progress report

A liquid chromatographic (LC) method has been developed as a general procedure for the assay of the salts of organic nitrogenous bases in a variety of dosage forms. The method uses a nitrile-bonded reverse phase column, a methanol-0.003M ammonium acetate (90 + 10) mobile phase, and photometric detection at 254 nm. The sample is dissolved in the mobile phase and an aliquot is injected through a 20 microL injection loop. Average recovery values for duplicate assays were chlorpheniramine maleate injection 97.8%, chlorpheniramine maleate tablets 99.1%, cyclizine hydrochloride tablets 100.0%, doxylamine succinate tablets 103.3%, mesoridazine besylate tablets 100.4%, pentazocine hydrochloride tablets 103.0%, promethazine hydrochloride injection 98.4%, protriptyline hydrochloride tablets 101.2%, pyrilamine maleate tablets 97.8%, pyrimethamine tablets 100.0%, tripelennamine citrate elixir 100.0%, and tripelennamine hydrochloride tablets 97.2%. Results by this method were in good agreement with those obtained by the USP XX method. This study, which is being continued, will be expanded to include additional drugs.     

UV spectrophotometric determination of hydralazine hydrochloride in tablets: collaborative study

A UV spectrophotometric method for the determination of hydralazine hydrochloride in tablets was collaboratively studied by 5 laboratories. The method is based on conversion of hydralazine to a tetrazolo [5,1-alpha]phthalazine derivative which shows an absorption maximum at about 274 nm. Each collaborator received blind duplicate samples of 2 commercial powdered composites from 10 and 100 mg tablets, and 1 synthetic tablet formulation. Each collaborator also received a set of 10 tablets for determination of content uniformity. The pooled mean recovery of hydralazine hydrochloride from the synthetic formulation was 101.2 +/- 0.94%. The mean assay values for 10 and 100 mg tablets were 95.6 +/- 0.98 and 101.0 +/- 0.73% of the declared amounts, respectively, with corresponding CV values of 1.02 and 0.73%. The pooled mean for individual tablet assay was 99.8 +/- 3.26% of the declared value, with a CV of 3.29%. The method has been adopted official first action.