Diviner Lunar Radiometer observations of cold traps in the Moon's south polar region

Diviner Lunar Radiometer Experiment surface-temperature maps reveal the existence of widespread surface and near-surface cryogenic regions that extend beyond the boundaries of persistent shadow. The Lunar Crater Observation and Sensing Satellite (LCROSS) struck one of the coldest of these regions, where subsurface temperatures are estimated to be 38 kelvin. Large areas of the lunar polar regions are currently cold enough to cold-trap water ice as well as a range of both more volatile and less volatile species. The diverse mixture of water and high-volatility compounds detected in the LCROSS ejecta plume is strong evidence for the impact delivery and cold-trapping of volatiles derived from primitive outer solar system bodies.     

Detection of water in the LCROSS ejecta plume

Several remote observations have indicated that water ice may be presented in permanently shadowed craters of the Moon. The Lunar Crater Observation and Sensing Satellite (LCROSS) mission was designed to provide direct evidence. On 9 October 2009, a spent Centaur rocket struck the persistently shadowed region within the lunar south pole crater Cabeus, ejecting debris, dust, and vapor. This material was observed by a second "shepherding" spacecraft, which carried nine instruments, including cameras, spectrometers, and a radiometer. Near-infrared absorbance attributed to water vapor and ice and ultraviolet emissions attributable to hydroxyl radicals support the presence of water in the debris. The maximum total water vapor and water ice within the instrument field of view was 155 ± 12 kilograms. Given the estimated total excavated mass of regolith that reached sunlight, and hence was observable, the concentration of water ice in the regolith at the LCROSS impact site is estimated to be 5.6 ± 2.9% by mass. In addition to water, spectral bands of a number of other volatile compounds were observed, including light hydrocarbons, sulfur-bearing species, and carbon dioxide.     

Hydrogen mapping of the lunar south pole using the LRO neutron detector experiment LEND

Hydrogen has been inferred to occur in enhanced concentrations within permanently shadowed regions and, hence, the coldest areas of the lunar poles. The Lunar Crater Observation and Sensing Satellite (LCROSS) mission was designed to detect hydrogen-bearing volatiles directly. Neutron flux measurements of the Moon's south polar region from the Lunar Exploration Neutron Detector (LEND) on the Lunar Reconnaissance Orbiter (LRO) spacecraft were used to select the optimal impact site for LCROSS. LEND data show several regions where the epithermal neutron flux from the surface is suppressed, which is indicative of enhanced hydrogen content. These regions are not spatially coincident with permanently shadowed regions of the Moon. The LCROSS impact site inside the Cabeus crater demonstrates the highest hydrogen concentration in the lunar south polar region, corresponding to an estimated content of 0.5 to 4.0% water ice by weight, depending on the thickness of any overlying dry regolith layer. The distribution of hydrogen across the region is consistent with buried water ice from cometary impacts, hydrogen implantation from the solar wind, and/or other as yet unknown sources.     

The LCROSS cratering experiment

As its detached upper-stage launch vehicle collided with the surface, instruments on the trailing Lunar Crater Observation and Sensing Satellite (LCROSS) Shepherding Spacecraft monitored the impact and ejecta. The faint impact flash in visible wavelengths and thermal signature imaged in the mid-infrared together indicate a low-density surface layer. The evolving spectra reveal not only OH within sunlit ejecta but also other volatile species. As the Shepherding Spacecraft approached the surface, it imaged a 25- to-30-meter-diameter crater and evidence of a high-angle ballistic ejecta plume still in the process of returning to the surface--an evolution attributed to the nature of the impactor.     

The frequency of meteorite falls on the Earth

Photographic observations from a network of 60 cameras in western Canada are used to derive the influx rate of meteorites on the earth's surface, the first time instrumental data have been used for this purpose. Forty-three observed events are believed to have dropped between 0.1 and 12 kilograms of meteorites each. The flux values are corrected for a minor latitude effect and agree with earlier estimates near 10 kilograms but vary more slowly with mass. Eight events per year drop at least 1 kilogram of meteorites in an area of 10(6) square kilometers.     

HST and VLT investigations of the fragments of comet C/1999 S4 (LINEAR)

At least 16 fragments were detected in images of comet C/1999 S4 (LINEAR) taken on 5 August 2000 with the Hubble Space Telescope (HST) and on 6 August with the Very Large Telescope (VLT). Photometric analysis of the fragments indicates that the largest ones have effective spherical diameters of about 100 meters, which implies that the total mass in the observed fragments was about 2 x 10(9) kilograms. The comet's dust tail, which was the most prominent optical feature in August, was produced during a major fragmentation event, whose activity peaked on UT 22.8 +/- 0.2 July 2000. The mass of small particles (diameters less than about 230 micrometers) in the tail was about 4 x 10(8) kilograms, which is comparable to the mass contained in a large fragment and to the total mass lost from water sublimation after 21 July 2000 (about 3 x 10(8) kilograms). HST spectroscopic observations during 5 and 6 July 2000 demonstrate that the nucleus contained little carbon monoxide ice (ratio of carbon monoxide to water is less than or equal to 0.4%), which suggests that this volatile species did not play a role in the fragmentation of C/1999 S4 (LINEAR).     

Amalthea's density is less than that of water

Radio Doppler data from the Galileo spacecraft's encounter with Amalthea, one of Jupiter's small inner moons, on 5 November 2002 yield a mass of (2.08 +/- 0.15) x 10(18) kilograms. Images of Amalthea from two Voyager spacecraft in 1979 and Galileo imaging between November 1996 and June 1997 yield a volume of (2.43 +/- 0.22) x 10(6) cubic kilometers. The satellite thus has a density of 857 +/- 99 kilograms per cubic meter. We suggest that Amalthea is porous and composed of water ice, as well as rocky material, and thus formed in a cold region of the solar system, possibly not at its present location near Jupiter.     

Protonic diffusion in high-pressure ice VII

Near ambient pressures, molecular diffusion dominates protonic diffusion in ice. Theoretical studies have predicted that protonic diffusion will dominate at high pressures in ice. We measured the protonic diffusion coefficient for the highest temperature molecular phase of ice VII at 400 kelvin over its entire stable pressure region. The values ranged from 10(-17) to 10(-15) square meters per second at pressures of 10 to 63 gigapascals. The diffusion coefficients extrapolated to high temperatures close to the ice VII melting curve were less by a factor of 10(2) to 10(3) than a superionic criterion of approximately 10(-8) square meters per second, at which protons would diffuse freely.     

Subaru telescope observations of Deep Impact

The impact cratering process on a comet is controversial but holds the key for interpreting observations of the Deep Impact collision with comet 9P/Tempel 1. Mid-infrared data from the Cooled Mid-Infrared Camera and Spectrometer (COMICS) of the Subaru Telescope indicate that the large-scale dust plume ejected by the impact contained a large mass (approximately 10(6) kilograms) of dust and formed two wings approximately +/-45 degrees from the symmetric center, both consistent with gravity as the primary control on the impact and its immediate aftermath. The dust distribution in the inner part of the plume, however, is inconsistent with a pure gravity control and implies that evaporation and expansion of volatiles accelerated dust.     

In situ observations of a high-pressure phase of H2O Ice

A previously unknown solid phase of H2O has been identified by its peculiar growth patterns, distinct pressure-temperature melting relations, and vibrational Raman spectra. Morphologies of ice crystals and their pressure-temperature melting relations were directly observed in a hydrothermal diamond-anvil cell for H2O bulk densities between 1203 and 1257 kilograms per cubic meter at temperatures between -10 degrees and 50 degreesC. Under these conditions, four different ice forms were observed to melt: two stable phases, ice V and ice VI, and two metastable phases, ice IV and the new ice phase. The Raman spectra and crystal morphology are consistent with a disordered anisotropic structure with some similarities to ice VI.     

A conducting polymer film stronger than aluminum

Polythiophene (Pth) was electrochemically deposited onto stainless steel substrate from freshly distilled boron fluoride-ethyl ether containing 10 millimoles of thiophene per liter. The free-standing Pth film obtained at an applied potential of 1.3 volts (versus Ag/AgCl) had a conductivity of 48.7 siemens per centimeter. Its tensile strength (1200 to 1300 kilograms per square centimeter) was greater than that of aluminium (1000 to 1100 kilograms per square centimeter). This Pth film behaves like a metal sheet and can be easily cut into various structures with a knife or a pair of scissors.     

Water production of comet C/1999 S4 (LINEAR) observed with the SWAN instrument

The SWAN (Solar Wind ANisotropies) Lyman-alpha all-sky camera on the SOHO spacecraft observed the hydrogen coma of comet C/1999 S4 (LINEAR) from the end of May through mid-August 2000. A systematic set of water-production rates was obtained for this well-documented event of complete fragmentation of a cometary nucleus. The observations indicate that the lower limit for the sunlit surface area of the nucleus was about 1 square kilometer before the fragmentation and that the amount of water released throughout the observing period was 3.3 x 10(9) kilograms. Evidence suggests that the activity of the comet was dominated by successive fragmentation. There were four major outbursts, occurring about every 16 days. The 21 July event led to the complete fragmentation and sublimation of what remained of the nucleus, producing the last 3 x 10(8) kilograms of water. A model where the fragment size distribution follows the power law N(R) approximately R-(2.7), where N and R are the number and radius of fragments, reproduces the observed dissipation. This distribution possibly reflects the internal structure of the nucleus.     

Triton's Geyser-Like Plumes: Discovery and Basic Characterization

At least four active geyser-like eruptions were discovered in Voyager 2 images of Triton, Neptune's large satellite. The two best documented eruptions occur as columns of dark material rising to an altitude of about 8 kilometers where dark clouds of material are left suspended to drift downwind over 100 kilometers. The radii of the rising columns appear to be in the range of several tens of meters to a kilometer. One model for the mechanism to drive the plumes involves heating of nitrogen ice in a subsurface greenhouse environment; nitrogen gas pressurized by the solar heating explosively vents to the surface carrying clouds of ice and dark partides into the atmosphere. A temperature increase of less than 4 kelvins above the ambient surface value of 38 +/- 3 kelvins is more than adequate to drive the plumes to an 8-kilometer altitude. The mass flux in the trailing clouds is estimated to consist of up to 10 kilograms of fine dark particles per second or twice as much nitrogen ice and perhaps several hundred or more kilograms of nitrogen gas per second. Each eruption may last a year or more, during which on the order of a tenth of a cubic kilometer of ice is sublimed.     

Aluminum-26 and beryllium-10 in greenland ice

Activities of beryllium-10 and aluminum-26 dissolved in 200-year-old Greenland ice were found to be 18.4 (+ 8.4, - 4.8) x 10(-6) and 3.2 +/- 0.9 x 10(-7) disintegration per minute per liter, respectively. From these values and the precipitation rate (30 milliliters of water per square centimeter per year), the production rates of these isotopes are calculated to be 3.6 (+ 1.6, - 0.9) x 10(-2) and 1.7 +/- 0.5 x 10(-4) atom per second * square centimeter. These rates agree with the rates calculated for the production of these isotopes by cosmic rays in the atmosphere. Probably all the Al(26) in the ice is accounted for by such atmospheric production; however, an upper limit for the influx of cosmic dust bearing aluminum-26 is calculated at 3.2 x 10(5) tons per year for Earth. Only upper limits could be found for Al(26) and Be(10) in the undissolved particulate matter in the ice; their addition to the activities in the dissolved material leaves our conclusions unchanged.     

Eruption of the nevado del ruiz volcano, Colombia, on 13 november 1985: tephra fall and lahars

A small Plinian eruption of the Nevado del Ruiz volcano in Colombia ejected 3.5 x 10(10) kilograms of mixed dacite and andesite tephra on 13 November 1985, with a maximum column height of 31 kilometers above sea level. Small pyroclastic flows and surges, generated during the initial stage of the eruption, caused surface melting of approximately 10% of the volcano's ice cap, leading to meltwater floods. The erosive floods incorporated soils and loose sediments from the volcano's flanks and developed into lahars, which claimed at least 25,000 lives.     

The mass of dwarf planet Eris

The discovery of dwarf planet Eris was followed shortly by the discovery of its satellite, Dysnomia, but the satellite orbit, and thus the system mass, was not known. New observations with the Keck Observatory and the Hubble Space Telescopes show that Dysnomia has a circular orbit with a radius of 37,350 +/- 140 (1-sigma) kilometers and a 15.774 +/- 0.002 day orbital period around Eris. These orbital parameters agree with expectations for a satellite formed out of the orbiting debris left from a giant impact. The mass of Eris from these orbital parameters is 1.67 x 10(22) +/- 0.02 x 10(22) kilograms, or 1.27 +/- 0.02 that of Pluto.     

The impact of boreal forest fire on climate warming

We report measurements and analysis of a boreal forest fire, integrating the effects of greenhouse gases, aerosols, black carbon deposition on snow and sea ice, and postfire changes in surface albedo. The net effect of all agents was to increase radiative forcing during the first year (34 +/- 31 Watts per square meter of burned area), but to decrease radiative forcing when averaged over an 80-year fire cycle (-2.3 +/- 2.2 Watts per square meter) because multidecadal increases in surface albedo had a larger impact than fire-emitted greenhouse gases. This result implies that future increases in boreal fire may not accelerate climate warming.     

Mass and local topography measurements of Itokawa by Hayabusa

The ranging instrument aboard the Hayabusa spacecraft measured the surface topography of asteroid 25143 Itokawa and its mass. A typical rough area is similar in roughness to debris located on the interior wall of a large crater on asteroid 433 Eros, which suggests a surface structure on Itokawa similar to crater ejecta on Eros. The mass of Itokawa was estimated as (3.58 +/- 0.18) x 10(10) kilograms, implying a bulk density of (1.95 +/- 0.14) grams per cubic centimeter for a volume of (1.84 +/- 0.09) x 10(7) cubic meters and a bulk porosity of approximately 40%, which is similar to that of angular sands, when assuming an LL (low iron chondritic) meteorite composition. Combined with surface observations, these data indicate that Itokawa is the first subkilometer-sized small asteroid showing a rubble-pile body rather than a solid monolithic asteroid.     

Lunar Surface Strength Estimate from Orbiter II Photograph

Lunar Orbiter II photographed a 13-meter boulder which has rolled down the inner slope of a 3-kilometer crater leaving a track 6 meters wide. A static-bearing . strength of 4 x 10(6) dynes per square centimeter at 75-centimeter depth is estimated from these data if certain assumptions are made.     

Probing asthenospheric density, temperature, and elastic moduli below the western United States

Periodic ocean tides continually provide a cyclic load on Earth's surface, the response to which can be exploited to provide new insights into Earth's interior structure. We used geodetic observations of surface displacements induced by ocean tidal loads to constrain a depth-dependent model for the crust and uppermost mantle that provides independent estimates of density and elastic moduli below the western United States and nearby offshore regions. Our observations require strong gradients in both density and elastic shear moduli at the top and bottom of the asthenosphere but no discrete structural discontinuity at a depth of 220 kilometers. The model indicates that the asthenosphere has a low-density anomaly of ~50 kilograms per cubic meter; a temperature anomaly of ~300°C can simultaneously explain this density anomaly and inferred colocated minima in elastic moduli.