A three component interaction among starch,protein, and free fatty acids revealed by pasting profiles

A three way interaction among starch, protein, and lipid that affects the Rapid Viscoanalyzer (RVA) paste viscosity profile was revealed using a model system composed of isolated sorghum starch, whey protein isolate, and free fatty acids (FFAs) (20:2:1, w/w/w). A prominent cooling stage viscosity peak in the RVA profile was produced when all three components were present in the system, while there was no viscosity peak when either protein or FFA alone was combined with starch. The magnitude of the cooling stage viscosity peak differed with addition of palmitic, oleic, or linoleic acids to starch and protein. Amylose was the major functional molecule of the starch component. Addition of both protein and FFA to starch substantially reduced starch solubility after gelatinization, while solubility was less affected by single addition of FFA and was not affected by protein. Nonspecificity of this interaction phenomenon was demonstrated by similar results using maize starch and other soluble proteins.     

Lipolysis during ripening of Emmental cheese considering organization of fat and preferential localization of bacteria

This study followed the progression of lipolysis in Emmental cheese by quantifying the concentrations of individual free fatty acids (FFA) released during ripening in each of the different rooms: 12 days at 12 degrees C, 28 days at 21 degrees C, and 8 days at 4 degrees C. Lipolysis, which corresponded to 1.56% of fat, mainly occurred in the 21 and 4 degrees C rooms, with 68 and 16.5% of total FFA, respectively. The nonselectivity of lipolytic enzymes was evidenced: all fatty acids were released with level of > or =1%. Differential scanning calorimetry experiments showed that the thermal properties of cheese were affected by (i) lipolysis of fat, that is, the monoacylglycerols, diacylglycerols, and FFA that may be localized at the fat/whey interface, and/or by (ii) hydrolysis of high-melting-point triacylglycerols constituted mainly by long-chain saturated fatty acids (e.g., palmitic acid). Analysis of the cheese microstructure was performed using confocal laser scanning microscopy. Fat globules were mainly disrupted after pressing of curd grains, leading to the release of the milk fat globule membrane (MFGM); fat inclusions were surrounded by pockets of whey, delimited by casein strands. Moreover, colonies of bacteria were preferentially localized in situ at the fat/protein interface. This study showed that both the localization of bacteria and the supramolecular organization of fat which was not protected by the MFGM can help the accessibility of milk fat to lipolytic enzymes and then contribute to the quality of cheese.     

Effects of season and processing on oil content and fatty acids of baltic herring (Clupea harengus membras)

Fatty acid composition, oil content, free fatty acid content, and peroxide value of Baltic herring (Clupea harengus membras) and two processed products (fried fillets and fish burgers) were investigated. The highest oil content of the fillets was found in autumn (10%), at the time when the free fatty acids had their minimum (1.4%). The main fatty acids were oleic (18-23%), palmitic (17%), palmitoleic (8-12%), and docosahexaeneoic (8-10%) acids. The proportion of saturated fatty acids was a constant 23% all year around, whereas mono- and polyunsaturated acids varied from 34 to 39% and 33 to 37%, respectively. During processing the oil content doubled and the fatty acid composition changed to the pattern of the rapeseed oil used for frying. Oleic acid was a major fatty acid in the products comprising over 40% of the total fatty acids. The proportion of n-3 acids decreased during processing but the total amount of polyunsaturated acids remained fairly constant.     

Simple and sensitive analysis of long-chain free fatty acids in milk by fluorogenic derivatization and high-performance liquid chromatography.

A highly sensitive high-performance liquid chromatography (HPLC) method is described for the simultaneous determination of some important saturated and unsaturated fatty acids in milk, including lauric (dodecanoic), myristic (tetradecanoic), palmitic (hexadecanoic), stearic (octadecanoic), palmitoleic (hexadecenoic), oleic (octadecenoic), and linoleic acids (octadecadienoic acids). The fatty acids were fluorogenically derivatized with 2-(2-naphthoxy)ethyl 2-(piperidino)ethanesulfonate (NOEPES) as their naphthoxyethyl derivatives. The resulting derivatives were separated by isocratic HPLC and monitored with a fluorometric detector (lambdaex = 235 nm, lambdaem = 350 nm). The fatty acids in milk were extracted with toluene, and the extract with the fatty acids was directly derivatized with NOEPES without solvent replacement. Determination of long-chain free fatty acids in milk is feasible by a standard addition method. A small amount of milk product, 10 microL, is sufficient for the analysis.     

The addition of Propionibacterium freudenreichii to Raclette cheese induces biochemical changes and enhances flavor development

Two mixtures of Propionibacterium freudenreichii commercial strains were tested as adjunct cultures in pasteurized milk Raclette cheese to investigate the ability of propionibacteria (PAB) to enhance flavor development. Cheese flavor was assessed by a trained sensory panel, and levels of free amino acids, free fatty acids, and volatile compounds were determined. The PAB level showed a 1.4 log increase within the ripening period (12 weeks at 11 degrees C). Eye formation, which was not desired, was not observed in PAB cheeses. PAB fermented lactate to acetate and propionate and produced fatty acids by lipolysis, branched chain volatile compounds derived from isoleucine and leucine catabolism and some esters. One of the experimental cheeses received the highest scores for odor and flavor intensity and was characterized by higher frequencies of detection for some minor notes ("propionic"and "whey" odor, "sweet" taste). PAB can therefore be considered as potential adjunct cultures to enhance or modify cheese flavor development.     

Contribution of the microbial and meat endogenous enzymes to the free amino acid and amine contents of dry fermented sausages.

The role of the starter culture and meat endogenous enzymes on the free amino acid and amine contents of dry fermented sausages was studied. Five batches of sausages were prepared. The control batch was manufactured with aseptic ingredients without microbial inoculation. The other four experimental batches were manufactured with aseptic ingredients inoculated with Lactobacillus plantarum 4045 or Micrococcus-12 or L. plantarum 4045 and Micrococcus-12 or L. plantarum 4045 and Staphylococcus sp. Their effects on pH, a(w), myofibrillar proteins, and free amino acid and amine contents were studied. Sausages inoculated only with L. plantarum 4045 or with this starter combined with a Micrococcaceae had the lowest pH as a result of carbohydrate fermentation. In all batches similar patterns were observed for myofibrillar proteins and free amino acids which could indicate that meat endogenous proteases play an important role in proteolytic phenomena. No changes were observed in the amine fraction, indicating that the strains used as starter cultures did not show amino acid decarboxylase activity.     

Effect of whey protein on the in vivo release of aldehydes

Retention of aldehydes by whey proteins in solutions buffered at a range of pH values was studied under static and dynamic headspace conditions and in vivo in exhaled air. Static headspace measurements showed a clear increase in retention in the presence of whey proteins for aldehydes with longer carbon chains and for buffer solutions with higher pH values. For in vivo aldehyde release measurements, these effects were much less pronounced. The presence of saliva or the binding of aldehydes to the surface of the oral cavity was not responsible for this effect. This difference can be explained by the highly dynamic conditions of in vivo aroma release of liquid products, due to the relatively large flow of air during exhalation. After swallowing, a thin film of aldehyde solution remains in the pharynx; subsequent exhalation will release both the free aldehydes present in this film and those reversibly bound to the whey protein.     

Fatty acids and fat-soluble vitamins in salted herring (Clupea harengus) products

The fatty acid composition and contents of fat and fat-soluble vitamins of three salted products prepared from Icelandic herring were analyzed. The effects of storage on the products over their shelf life, 6 or 12 months, were investigated. The average oil content of salted, gutted herring and salted fillets in vacuum remained constant, 17 and 12% of wet weight, respectively. In the pickled product the oil content decreased during the 12 months of storage from 13 to 12%. The composition of the products was typical for herring, the most abundant fatty acids being oleic (18:1n-9), palmitic (16:0), cetoleic (22:1n-11), and gadoleic (20:1n-9) acids. Monounsaturated acids constituted clearly the main group with a proportion of >50% of all fatty acids. Eicosapentaenoic acid (EPA, 20:5n-3) and docosahexaenoic acid (DHA, 22:6n-3) comprised together >12% of all fatty acids. During storage, some hydrolysis of triacylglycerol (TAG) occurred, causing a slight reduction in practically all esterified fatty acids. In none of the three products was the loss of polyunsaturated fatty acids from TAG greater than the loss of saturated ones, indicating that the loss of EPA and DHA was not due to oxidation. After packing, the average content of vitamins A, D, and E in the products varied between 27 and 87 microg/100 g (wet weight), between 17-28 microg/100 g (wet weight), and between 77-120 microg/100 g (wet weight), respectively. During storage, the level of vitamin A decreased significantly, whereas no loss of vitamin D was observed. The content of vitamin E was low in all products and showed wide variation. When compared to the recommended daily intake, it could be concluded that the products investigated were good and stable sources of long-chain n-3 fatty acids (EPA, DHA) and vitamin D.     

Oil and squalene in amaranthus grain and leaf

Amaranthus grain of 104 genotypes from 30 species was investigated for oil and squalene contents and fatty acid profiles. The overall average oil content in Amaranthus grain was 5.0%, ranging from 1.9 to 8.7%. Squalene concentration in extracted oils ranged from trace to 7.3%, with an average concentration of 4.2%. The average contents of three major fatty acids in Amaranthus grain were 22.2, 29.1, and 44.6% for palmitic, oleic, and linoleic, respectively. The average fat content in dried mature leaves of 45 Amaranthus genotypes was 1.63%, ranging from 1.08 to 2.18%. The squalene concentration in leaf lipid extracts averaged 0.26%, ranging from trace to 0.77%, which is much lower than that from seeds. The major fatty acids of leaf extracts were linolenic, linoleic, and palmitic. Linolenic ranged from 56.5 to 62.0% of total fatty acids; linoleic, from 15.5 to 24.7%; and palmitic acid, from 13.5 to 15.5%. As for the fatty acid compositions at different growth stages, fatty acid content in leaf lipid was lower in mature leaves than in young leaves. The saturated/unsaturated ratio decreased when the leaf grew to maturity. Principal component analysis (PCA) was carried out on compositional characteristics of grain. The first two components accounted for 70% of the total variance (38.3 and 21.7%, respectively). There was a positive correlation between oil content and squalene yield, and a negative correlations were found between linoleic and either of the other two major fatty acids, palmitic and oleic. The taxonomic relationship among the species was also elucidated by PCA.     

Binding between bixin and whey protein at pH 7.4 studied by spectroscopy and isothermal titration calorimetry

Bixin is the major coloring component of annatto used in manufacturing colored cheeses, but its presence in liquid whey causes undesirable quality of the recovered whey protein ingredients. The objective of this work was to study molecular binding between bixin and three major whey proteins (β-lactoglobulin, α-lactalbumin, and bovine serum albumin) at pH 7.4 using UV-vis absorption spectroscopy, fluorescence spectroscopy, isothermal titration calorimetry, and circular dichroism. These complementary techniques illustrated that the binding is a spontaneous complexation process mainly driven by hydrophobic interactions. The complexation is favored at a lower temperature and a higher ionic strength. At a lower temperature, the binding is entropy-driven, while it changes to an enthalpy-driven process at higher temperatures. The binding also increases the percentage of unordered secondary structures of proteins. Findings from this work can be used to develop whey protein recovery processes for minimizing residual annatto content in whey protein ingredients.     

Characterization of squid-processing byproduct hydrolysate and its potential as aquaculture feed ingredient

The squid (Loligo pealei) byproduct composed of heads, viscera, skin, fins, and small tubes was subjected to hydrolysis at 55 degrees C and natural pH (6.8) using endogenous proteases. Squid hydrolysate was characterized during the course of hydrolysis for changes in the degree of hydrolysis, viscosity, electrophoretic pattern of proteins and peptides, and amino acid and fatty acid profiles. The change in viscosity can be used to monitor the progress of protein hydrolysis up to the molecular mass of 26.63 kDa. The 2 h hydrolysis resulted in a 2-fold increase in the total free amino acids and yielded hydrolysate with protein molecular mass of < or =45 kDa having feed attractability and good amino acid and fatty acid profiles with high contents of essential amino acids and fatty acids. Such hydrolysis-induced changes can make squid byproduct hydrolysate a good source of aquaculture feed ingredient, especially for a starter diet for larval fish.     

Chemical characterization of dissolvable tobacco products promoted to reduce harm

In 2009, the R. J. Reynolds Tobacco Co. released a line of dissolvable tobacco products that are marketed as an alternative to smoking in places where smoking is prohibited. These products are currently available in Indianapolis, IN, Columbus, OH, and Portland, OR. This paper describes the chemical characterization of four such products by gas chromatography-mass spectrometry (GC-MS). The dissolvable tobacco products were extracted and prepared by ultrasonic extraction using acetone, trimethylsilyl derivatization, and headspace solid phase microextraction (SPME). The following compounds were identified in the dissolvables using either ultrasonic extractions or trimethylsilyl derivatization: nicotine, ethyl citrate, palmitic acid, stearic acid, sorbitol, glycerol, and xylitol. The following compounds were identified in the dissolvables using headspace SPME: nicotine, ethyl citrate, cinnamaldehyde, coumarin, vanillin, and carvone. With the exception of nicotine, the compounds identified thus far in the dissolvables are either flavoring compounds or binders. The concentration of free nicotine in the dissolvables was determined from the Henderson-Hasselbalch equation and by measuring the pH and nicotine concentration by GC-MS. The results presented here are the first to reveal the complexity of dissolvable tobacco products and may be used to assess potential oral health effects.     

Comparison of solid-phase microextraction and stir bar sorptive extraction for the quantification of malodors in wastewater

Malodors in wastewater from animal-rearing facilities are due to the presence of characteristic polar compounds. The efficiency and reproducibility of three solid-phase microextraction (SPME) fibers (Carboxen-PDMS, polyacrylate, and PDMS) as well as PDMS-coated stir bars for the measurement of some of these compounds in the liquid phase were compared. In initial experiments, the SPME fibers and stir bars were exposed to a standard water solution containing a mixture of 18 compounds with a range of octanol-water partition coefficients. The polyacrylate SPME fibers and PDMS-coated stir bars, having been found to possess the best combination of extraction efficiency and reproducibility of measurement, were compared for the extraction of a high-strength swine wastewater. Ten compounds, which are known contributors to malodors in wastewater, were quantified by both methods of extraction. For most compounds, greater levels were estimated by the PDMS-coated stir bars than by SPME, and measurement reproducibility was also greater. For both methods of extraction, there was greater variation in the measurement of volatile fatty acids than there was for aromatics.     

Investigation of volatiles evolution during the alcoholic fermentation of grape must using free and immobilized cells with the help of solid phase microextraction (SPME) headspace sampling

A biocatalyst was prepared by immobilization of Saccharomyces cerevisiae strain AXAZ-1 on delignified cellulosic material (DCM). Repeated batch fermentations were conducted using these biocatalysts and free cells, separately, at temperatures of 20, 15, and 10 degrees C. Solid phase microextraction (SPME) was used in monitoring the formation of volatile alcohols, acetate esters, and ethyl esters of fatty acids. The kinetics of volatile production were similar for free and immobilized cells. In all cases immobilized cells showed a better rate of volatile production, which was directly connected to sugar consumption. The main difference observed was in propanol production, which increased with temperature decrease for the immobilized cells, whereas it remained constant for the free ones. In the case of immobilized cells significant amounts of esters were also produced. It is well-known that esters contribute to the fruity aroma of wine. It was also established that SPME is a very sensitive, accurate, and reliable technique and can be used without any reservation in the characterization of volatile constituents of wine.     

Time course and specificity of lipolysis in Swiss cheese

Controlling lipolysis in cheese is necessary to ensure the formation of desirable flavor. To get a better understanding of the mechanism of lipolysis in Swiss cheese, cheeses were manufactured with and without (control) the addition of Propionibacterium freudenreichii. Products of lipolysis were quantified throughout ripening. Half of the free fatty acids (FFA) released in milk (3.66 mg/g fat), in particular the short-chain FFA, were lost in the whey during curd drainage, whereas diglycerides and monoglycerides were retained within the curd. P. freudenreichii was responsible for the release of most FFA during ripening (10.84 and 0.39 mg/g fat in propionibacteria-containing and control cheeses, respectively). Indices of lipolysis displayed low specificity. All types of FFA were released, but butyric and palmitic acids more significantly, which could be due to a low sn-1,3 regioselectivity. All glycerides were hydrolyzed in the following order: monoglycerides>diglycerides>triglycerides. The results of this study show the quantitative and qualitative contributions of the different lipolytic agents to Swiss cheese lipolysis.     

Effect of additives on subcritical water hydrolysis of whey protein isolate

The objective was to examine the effect of the additives acetic acid, lactic acid, sodium bicarbonate, sodium chloride, and sodium hydroxide on the hydrolysis of whey protein isolate with subcritical water. A screening experimental design was used to study the effect of temperature, time, and additives. The most influential additive, sodium bicarbonate, along with temperature and time was used in a second experimental design to predict the treatment conditions to maximize the degree of hydrolysis and production of free amino acids. The maximum degree of hydrolysis achieved was 50% at a concentration of 1.24 M sodium bicarbonate, 291 °C, and 28 min. The highest concentration of total amino acids was 83.0 mg/g of whey protein isolate with 0.83 M sodium bicarbonate at 264 °C for 29 min. Compared to water alone, sodium bicarbonate increased the degree of hydrolysis 4-fold and the production of amino acids by 44% and decreased peptides' molecular weight.     

Effect of emulsifier on oxidation properties of fish oil-based structured lipid emulsions

The effects of the emulsifiers lecithin, Tween 20, whey protein isolate, mono-/diacylglycerols, and sucrose fatty acid ester on oxidation stability of a model oil-in-water emulsion prepared with enzymatically synthesized menhaden oil-caprylic acid structured lipid were evaluated. Oxidation was monitored by measuring lipid hydroperoxides, thiobarbituric acid reactive substances, and the ratio of combined docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) contents to palmitic acid in the emulsion. After high-pressure homogenization, all emulsions, except those prepared with lecithin, had similar droplet size distributions. All structured lipid emulsions, except for the lecithin-stabilized emulsions, were stable to creaming over the 48-day period studied. Emulsifier type and concentration affected oxidation rate, with 0.25% emulsifier concentration generally having a higher oxidation rate than 1% emulsifier concentration. Overall, oxidation did not progress significantly enough in 48 days of storage to affect DHA and EPA levels in the emulsion.     

Evaluation of the thermally dried immobilized cells of Lactobacillus delbrueckii subsp. bulgaricus on apple pieces as a potent starter culture

The aim of the present study was to evaluate the impact of thermal drying of immobilized Lactobacillus delbrueckii subsp. bulgaricus on apple pieces on the use of the derived biocatalyst in whey fermentation. The thermally dried immobilized biocatalyst was compared to wet and freeze-dried immobilized cells, in respect to maintenance of cell viability and fermentation efficiency. The thermal drying process appeared to be more efficient on survival rate as an 84% of the cells used for immobilization survived the process, while the freeze-drying process led to a 78% rate. The thermally dried immobilized biocatalyst was used in 12 repeated batch fermentations of synthetic lactose medium and whey at 37, 45, and 50 degrees C in order to evaluate its metabolic activity. The high number of repeated batch fermentations showed a tendency for high operational stability. Fermentations continued for up to 2 months without any significant loss of metabolic activity. SPME GC/MS analysis of aroma-related compounds revealed the distinctive character of fermented whey produced by the thermally dried immobilized bacterium cells. The effect of storage at 4-6 degrees C for up to 165 days of the biocatalyst, held directly after drying and after repeated batch fermentations, on fermentation activity was also studied. After storage, reactivation in whey was immediate, and the immobilized biocatalyst was able to produce up to 51.7 g/L lactic acid at 37 degrees C. The potential of thermally dried immobilized L. delbrueckii as a starter culture for food production was subsequently evaluated.     

Effect of antioxidants on oxidation during the production of whey fat concentrate

Whey fat has a relatively high level of unsaturated fatty acids, and as such, whey products with a high fat content are vulnerable to oxidation. The purposes of the present study were to assess the oxidative development in whey fat concentrate (WFC) during production and investigate the effect of the addition of antioxidants. Green tea extract (GTE) or a mixture of ascorbyl palmitate and tocopherol (AP/TOC) were used, each in two concentrations. Samples were taken before and after pasteurization of WFC and after drying. The level of volatile oxidation products decreased during processing, while dityrosine concentrations increased during drying. GTE reduced oxidation in both unpasteurized and pasteurized WFC, while the effect of AP/TOC was nonsignificant. In the WFC powder, there was no significant effect of the antioxidants. In conclusion, results indicated that GTE was able to inhibit oxidation in WFC during production and that AP/TOC addition had no effect.     

Liquid chromatographic method for quantitative determination of free fatty acids in butter

A liquid chromatographic method has been developed for the determination of free fatty acids in butter. The fatty acids are converted to the p-bromophenacyl esters, via a crown ether-catalyzed reaction, without separation from the other butter components. The esters are separated on a C18-bonded silica column by using an acetonitrile-water solvent gradient and quantitated using the ester of heptadecanoic acid as internal standard. C16 and C18:1 co-elute in the acetonitrile-water system but are separated using an isocratic methanol-acetonitrile-water system. Limits of detection range from 7 ng for butyric acid to 45 ng for linoleic acid. The average coefficient of variation (n = 10) for 10 free fatty acids from a butter was 5.83%.